hpdv6000 won't start - error updates configuration? !!

Similar Questions

• 6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  My computer is a PC with Windows 10.
  Everything worked well before the Update Adobe Lightroom 6.
  The software was purchased in a shop (FNAC) with software to download map, it is saved in my account (Adobe) with its serial number. Why is this so difficult thing to reinstall Adobe software?
  

  
  

  I apologize for the inconvenience.

  Since it appears and disappears from the Task Manager, it seems that Lightroom crashes.

  We have seen this kind of problem on Windows 10 when Visual C++ Reditsributable 2012 update 4 is not installed correctly, it is necessary to run certain programs. You might have encountered until now Adobe programs that require it.

  Otherwise, there could be another cause of this accident and if C++ installation does not help, then you need to share the event viewer crash logs. See this article for in crash logs: Photoshop Elements Editor Help. How to find the crash logs on to Windows

• Qosmio G20 - won't start, error ATA #1

  I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart

  Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing

  To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not

  Help, please

  Hey,.

  To me, it looks like a serious hardware malfunction

  You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.

  The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.

• Won't start, error message empty

  I bought, installed and started using Dreamweaver 8 on my Mac OS x 10.4.7. I exit the application. When I tried to open subsequently, it won't start and the error message is empty (other than the! sign and the "ok" button). I can't find anything in the knowledge base supprt data for help. I do not want to reinstall because then I will use my second and final installation.

  > because then I will use my second and final installation.

  No, you won't.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "davidoconnor123" wrote in message
  News:eavkf4$M4U$1@forums. Macromedia.com...
  > I bought, installed and started using Dreamweaver 8 on my Mac OS x 10.4.7.
  > I
  > exit the application. When I tried to open it later, it doesn't start and
  > the
  > error message is empty (other than the! sign and the "ok" button). I have
  > can not
  > nothing found in the knowledge base supprt data for help. I don't want to
  > reinstall it because then I will use my second and last
  > installation.
  >

• Suddenly audition, Dreamweaver, Photoshop, and first cc won't start - error 0xc000007b

  I can't start with four of Adobe Creative Cloud applications.  How can I fix it?

  I finally solved the problem with some Adobe programs starting do not; for example hearing, Dreamweaver, Photoshop, and Premiere Pro wouldn't start - error (0xc000007b).  Other Adobe programs (AfterEffects, bridge, still and Acrobat DC) started OK.  The solution was to 'Fix' the "redistributable Microsoft Visual C++ programs in the Control Panel - programs and features.  My system has 14 of them with dates from 2005 to 2015.  I have no idea who it was the problem since I have "repaired" all 14 before finding that the Adobe programs would now begin. Thanks for the suggestions!

• ScanJet 4070 - (col8356.exe) won't start - error 1603

  I have a Scanjet 4400c for almost ten years (and it still works fine ), but recently I found one working Scanjet 4070 to a goodwill store and want to know if the thing (the College of physicians in particular).  Its connections are being the same, so all I have to do is swap to run the software/driver install... and that is the problem.

  I downloaded the software package (HP Image Zone 4.1, filename col8356.exe) and unpacked but nothing else - the installation program (setup.exe) is not running.  I tracked down the directory of decompression and tried again, but still, setup.exe does not.  (Process Explorer check that the installation process was started, but stop unexpectedly.)

  I am not shown error messages any.

  I downloaded the fix for the HP products that get an error during installation (Jan. 2006), and while the update ran properly, Setup still does not work.

  I am of the ideas for the time currently, but eager to keep trying.  Any thoughts?

  Solved!  Search the error text "we couldn't understand a language to use" gave this topic which describes the exact same symptoms and isolate a cause - apparently it is caused by something blocking the process of configuration to correctly access its autorun.inf, and it can be solved in a relatively simple tweak to the system (HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\IniFileMapping) associated with autorun registry key.

  Of note is that after changing the registry that I had to reboot the system before installing HP would install (but the installation went without a hitch).

  Also of note is that I had to apply the installation patch (col9464.exe) first until HP setup would even provide a logfile of output at all.

  Now I can start to really test this scanner...

• My MacBook Pro won't start after update to El Capitan, how can I go back?

  Hello

  I really hope that someone can help me here. I've updated to El Capitan Yosemite yesterday through software update, but now when I start the computer I get "no entry" or sign a circle with a diagonal line through it, or the Apple with the progress bar / error message / black screen and it repeats 3 times then stops.

  I'mnot you know where my disk of Mac OS x is so ideally don't want to reinstall the whole system.

  I did a back up of my work using Time Machine before saving, so I hope that I have most of the things I need backup.

  Restart by pressing cmd - R after the tone. It should boot into Recovery. From there, use disk to check/repair disk utility. Quit disk utility and reinstall OS X.

  The circle with a slash through it means that it does not find the necessary boot files.

• Windows 7 64 bit - Diagnostic Policy Service won't start - error 5 access is denied

  Hello

  I am getting the Diagnostic Policy Service error 5 access denied. I can't start the service no matter what I do. I did all of the following without success and need urgent advice as gone through a lot of forums without success.

  (1) used the subinacl tool to reset my security clearance on all the registry files grant complete access to administrators and system without success

  (2) have started my pc using MSCONFIG in a configuration minimum diabling all non-microsoft services, and it did not solve my problem.

  (3) I tried to add/remove a feature of Windows like Windows Media Player and when the shuttdown system displays a msg saying that Windows could not configure your system so that the new setting, windows will revert to the previous state. and the media player is always on display.

  The fact that the Diagnostic Policy Service does not stop me using my Dial-up connection using a wireless modem using the PC card, it gives me Error 797 Port is not available. My dial-up show property of connection in the general tab, under connect using this says: device Unailable deleted (). So I have no internet on PC card, even if the device is detected by Windows and I see it as Iburst Terminal.

  I also have a problem, when I click on the phone and Modem in Control Panel, I get following error: phone and Modem Control Panel can not be opened. You can have a problem starting Telephony Service.

  I checked the Telephony Service it is configured to automatically and it is started. (I tried stop/Start) but doesn't solve is not my problem.

  Any help on this is much appreciated.

  Concerns

  JackDevVB

  Dear I.  Suuresh Kumar,

  Your silence to my post 2 has left me no choice to do a repair of Windows 7 upgrade. For the people who run the same problem, I found that it was the only alternative because none of Microsoft could give me an answer. I found a post that explains how to make a repair upgrade, which, for me, took place between 13:30 and completely finished and successuflly at 20:00.

  What it does, it re - install a clean version of Windows and keeps all your programs/settings/drivers/connections etc... intact. It was my solution. My system is now clean and without any problem. TKS at the following link.

  http://social.answers.Microsoft.com/forums/en-us/w7security/thread/8c812684-E790-43b9-BEEA-3a8759f2dc7f

  All this is thanks to Kevin technician from Microsoft technical support. Thank you very much Kevin

  Concerning

  JackDevVB

• Problem, radio won't start after update to Mozilla Firefox 12

  I have problem with a radio to a Web site after the update of Mozilla Firefox 12 when I connect to the webste radio starts, when I use Internet explore the radio starts. Check the image

  http://img859.imageshack.us/img859/3150/egweggwe.PNG

  Your list of plugins shows two WMP plugins.
  
  The classic WMP plugin (Npdsplay dll) and the new WMP plugin (np - mswmp.dll).

  Try disabling the WMP classic (Npdsplay dll) plugin in tools > Modules > Plugins

• Satellite P200 - 1FC: CD/DVD player won't start - error Code 10

  My Satellite P200 - 1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD drive is listed in the device as "TSST corp CDDVDW TS - L632H ATA Device" Manager.

  Initially, the drive worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  By clicking on 'could not load driver software' product solutions but not solution.

  The search for similar issues in the forums of users suggests that use of a page of Microsoft Support Help & directed "the CD-ROM drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".

  However it is to change the registry! As a relative novice, I am reluctant to do unless I can find no easier way.

  Should I bite the bullet and and enter into this minefield, or is there a better way?

  > At first the car worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  Certainly, this error is caused by an incorrect registry entry.
  I had this error several times and I solved this disassembly of these registry keys upper and lower filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here are a few steps how it worked on my Windows system;
  -J' removed the Device Manager CD/DVD drive
  -Then edited the registry as described above
  -Restarting the laptop

  I'm sure that this will also help you.

  Good bye

• Equium A60 won't start - error message: Load needed DLLs for kernel

  The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
  Re-install? I made this countless times.

  Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

  Any suggestions on how to deal with this problem will be greatly appreciated.
  Blessings on you.

  Hello

  Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

• Satellite L30 won't start - error below messages

  Can anyone help please? I have a satellite L30 & out of no where it does not start
  below error. I entered the bios & checked initialize preferences (disk HARD, ETC.)
  but all I get is the message below. I also tried a system restore, but nothing.

  For realtek RTL8139 (X) /8130/ 810 X PCI fast ethernet controller v2.13 (020326)
  PXE - E61: media test failure, check cable of
  PXE - M0F: Existing PXE ROM.
  operating system not found

  When I boot with the recovery CD in I get the message below

  Windows has encountered a problem... etc etc etc the usual windows bit.
  then

  status Oxc0000e9
  Info unexpected i/o error has occurred

  Thank you all
  Mark

  In my opinion, the HARD drive is certainly the reason why the laptop tries to boot from LAN.
  Yes, the laptop computer tries to boot from LAN and, therefore, the error message (PXE - E61: media test failure, check cable) is displayed.

  I think that a HARD drive replacement and the new installation of the OS will help you solve this problem.

  Greetings

• Windows 7 backup won't start, error: error 0 x 80070422

  original title: backup does not start

  Error 0 x 80070422, no active device is associated.  The service runs.

  Windows 7 Ultimate 64.

  I ran into the same error. What has worked for me, is to go into 'msconfig' and under the general tab, make sure that there is a check mark in the box "load system services.  After a reboot my backup now works.

• Agent 4.2 won't start - error Exception in thread "main".

  I'm trying to install agent 4.2 on Centos 5.4 x 64 and I tried the RPM Installer and the standard linux installation program. The two will not start. I've been on 4.1.1 front and it worked (always at work) this is the error I get. for now I will return to the point 4.1.1 of this agent... any ideas what the problem is?
  
  Thank you
  
  [root@es-hyperic bin] #./hq-agent.sh start
  Starting the Agent HQ...
  Exception in thread "main" java.lang.NoClassDefFoundError: org.hyperic.hq.bizapp.agent.client.AgentClient
  at java.lang.Class.initializeClass (libgcj.so.7rh)
  Caused by: java.lang.ClassNotFoundException: sun.misc.SignalHandler not found in gnu.gcj.runtime.SystemClassLoader{urls=[file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/lib/AgentClient.jar,file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/pdk/lib/ant.jar,file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/pdk/lib/commons-logging.jar,file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/pdk/lib/log4j-1.2.14.jar,file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/pdk/lib/hyperic-util.jar,file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/pdk/lib/sigar.jar ,file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/pdk/lib/hq-product.jar,file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/pdk/lib/commons-httpclient-3.1.jar,file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/pdk/lib/commons-codec-1.3.jar,file:/opt/hyperic/hyperic-hq-agent/bundles/agent-4.2.0-1260/lib/lather.jar], parent=gnu.gcj.runtime.ExtensionClassLoader{urls=[], parent=null}}
  at java.net.URLClassLoader.findClass (libgcj.so.7rh)
  at java.lang.ClassLoader.loadClass (libgcj.so.7rh)
  at java.lang.ClassLoader.loadClass (libgcj.so.7rh)
  at java.lang.Class.initializeClass (libgcj.so.7rh)
  [root@es-hyperic bin] #.

  Hello

  There seems to be a problem with your JRE/JDK. Please check your environment variables JAVA_HOME and HQ_JAVA_HOME and make sure you use a SUN JRE or OpenJDK, but not GNU Java.

  See you soon,.
  Mirko

• vCenter Service won't start - error in SQL database

  After a failure in our system of vCenter Server virutal starts at level fine Windows, but would not launch vCenter Service

  Error when you go to Services and choose to start the service "VMWare VirtualCenter Server.

  'Service '.

  Windows could not start the VMware VirtualCenter on IBMVC01 server. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code. »

  In the system event log:

  EVENT ID error: 17809

  Could not connect because the maximum number of '1' user connections has already been reached. The system administrator can use sp_configure to increase the maximum value. The connection has been closed. [CLIENT: local machine >]

  I googled around and found a few shots on the connection to SQL and issuance of an order to increase this authentication / connection number, but when I run the SQL Studio Express tools and try to connect to the database that the local administrator account he errors on authentication.  I keep poking at the issue, but he was hoping someone else has had this problem with vCenter and has an idea.  I have a battery of 28 knots box by with a dozen systems could not be started due to file locking issues.

  Thank you

  You must use SQL Management Studio, not express, or if you have a DBA, make him make the change

  http://KB.VMware.com/kb/1026463