Error using EXCLUDE in business rules

Similar Questions

• Error during migration of business rules

  While trying to use the import/export option in environmental assessments to migrate business rules, we encountered an error.
  The export went very well. When you try to import, it says this: (even if it allows me to select the xml file suitable for import)
  Error during migration of business rules.
  Detail: The import file specified is not a valid trade rules xml file. Import ends.
  Details: Exception occurred. Please check your log file for more details.
  
  I'm sure I used the inherent format to export business rules.
  The old and new systems are version 11.1.2.
  
  The LCM method has failed also to the migration of business rules.
  Any suggetions?
  Thank you
  Elkaïm

  When you export make them sure you don't have "For Calc Mgr" checked, if you then import with failure.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error calling operation, working business rule

  I'm a Faulted while invoking the operation 'callFunctionStateless' the provider 'OracleRules1.OracleRules1_OracleRules1_DecisionService_1' on a business call inside my rule on my ApprovalProcess.bpel.  This approval policy is related to activity of the user to be created.  I am using Enterprise Manager 11.1.1.7.0  It's the first rule of business, I have worked on.  The payload for the invoke is:

  < messages >

  < entry >

  < Invoke_callFunctionStateless_InputVariable_1 >

  < part name =" payload " > 

  < callFunctionStateless />

  </ part >

  </ Invoke_callFunctionStateless_InputVariable_1 >

  </ entry >

  < fault >

  < bpelFault >

  < faultType > 0 < / faultType >

  < operationErroredFault >

  < part name =" payload " > 

  < errorInfo >

  < errorMessage > Index: 0, size: 0 < / errorMessage >

  </ errorInfo >

  </ part >

  </ operationErroredFault >

  </ bpelFault >

  </ fault >

  < faultType >

  < message > 0 < / message >

  </ faultType >

  </ messages >

  
  

  I guess the issue is because the input parameters are empty?

  
  

  That's what I see in the soa_server1.out when I test this point.

  < 14 may 2014 9:35:43 CDT > < error > < oracle.soa.services.rules > < BEA-000000 > < < >. error when running the session rule.

  The session of rule 10184 cannot run.

  Check the underlying exception and fix the error. If the error persists, contact Oracle Support Services.

  Error when running the session rule.

  The session of rule 10184 cannot run.

  Check the underlying exception and fix the error. If the error persists, contact Oracle Support Services.

  at oracle.bpel.services.rules.rpi.AbstractDefaultRuleSession.execute(AbstractDefaultRuleSession.java:276)

  at oracle.bpel.services.rules.rpi.oracle2.OracleRuleSession.execute(OracleRuleSession.java:278)

  at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:342)

  at oracle.bpel.services.rules.fabric.BusinessRulesServiceEngine.request(BusinessRulesServiceEngine.java:1024)

  at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)

  at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:182)

  to oracle.integration.platform.blocks.mesh.MeshImpl$ 2.run(MeshImpl.java:217)

  at java.security.AccessController.doPrivileged (Native Method)

  at javax.security.auth.Subject.doAs(Subject.java:396)

  at oracle.integration.platform.blocks.mesh.MeshImpl.doRequestAsSubject(MeshImpl.java:215)

  at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:187)

  at sun.reflect.GeneratedMethodAccessor4517.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)

  Thank you

  Tom Henriksen

  Yes, you must create an xml based on the RequestCatalogDetailsDataType to complete. Then you should be able to send to business rules like this: but in your case you have to send it to the variable of the dsIn.

  

• Error opening of AAS business rule

  Hello
  
  I'm unable to open console ASA business associated with one of the planning rules / Essbase application. This particular planning application is also not appear when I try to "select Preview ' for the business rule. The rules of business for this particular application are works good planning of a web application.
  
  
  Error recovery planning request app_name on server servername.
  Details: Exception occurred. Please check your log file for more details.
  
  hbrserver.log randomly shows one of the following two errors:
  2010-06-15 16:02:56, 469 [ACTIVE] WARN ExecuteThread: '1' for the queue: com.hyperion.hbr.plugin.planning.PlanningMetadata "(self-adjusting) weblogic.kernel.Default" - error recovery planning request app_name on server servername.
  
  or
  
  2010-06-15 15:28:22, 094 [ACTIVE] WARN ExecuteThread: '0' for the queue: com.hyperion.hbr.plugin.planning.PlanningMetadata '(self-adjusting) weblogic.kernel.Default' - Impossible to recover root element connected to planning/server_name/app_name/database_name
  
  
  There is no problem with the other rules of business that are associated with other applications.
  
  
  I tried to restart the Regional but that does not solve the issue. Furthermore, I believe that this problem came after I manually deployed 64 bit weblogic for EAS. On other environments where tomcat is used there is no problem at all.
  
  
  Thanks in advance.

  I assume you've tried the standard process of: -.
  Stop planning, EAS, RMI services.
  Start planning of RMI, EAS,
  Connect to the planning through the web application.
  Connect to EAS, open your rule.

  Also you can create a new rule for the planning application after following the process described above?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error when creating a business rule

  Hi all
  
  I'm trying to create the regional service console m rule when I choose business rule > repsitory display > rules > new rule > select outline.
  I am able to select an essbase database schema, but while I am trying to select the outline planning I get the following error
  
  
  WARN http-10080-Processor4 com.hyperion.hbr.plugin.planning.PlanningMetadata - connection error in the metamorp-ee0b9e of Planning Server.
  
  
  Any suggestion?
  
  Thank you

  The problem is solved? You log on with the default admin user? Given that it is a question in the environmental assessments for business so rules using user default hyperion. For example, to create a new admin user and try. I hope this will help you!

  byeee
  Ankur

• Validation error in calculation Manager business rule (@_AT)?

  I've migrated a 11.1.1.3 business rule and both macros (models) in the calculation Manager 11.1.2.2. When I validate the script I get the following error. Everyone has seen this before or have any advice? Script syntax checks ok.

  "An error occurred in: rule: FCO_3YrBud_DGAlloc error: formula [statement of DIFFICULTY] (line 24) parse error: expected [()] found [@_AT]" after the function name rule FCO_3YrBud_DGAlloc ".

  Line 24 is the first declaration of FIX in the script below show:

  UPDATECALC OFF SET; AGGMISSG OFF SET;

  Model of % (name: = "FCOm_TargetSection", ask: = 'FCO', plantype: = 'FCO', PDT: = ("parm1": = ([["three year Budget"]]), "parm2": = ([["DGAllocation"]]), "parm3":=([[{FCOrtpYears}]]),"parm4":=([[Mar]])))))

  Model of % (name: = "FCOm_TargetAgg", ask: = 'FCO', plantype: = 'FCO', PDT: = ("parm1": = ([["three year Budget"]]), "parm2": = ([["DGAllocation"]]), "parm3":=([[{FCOrtpYears}]]),"parm4":=([[Mar]])))))

  First model:

  UPDATECALC OFF SET; AGGMISSG OFF SET;

  /****************************************************************************************************************

  FCOm_TargetSection

  parm1 = scenario

  PARM2 = version

  parm3 = years

  parm4 = periods

  The purpose of this macro is to translate GBP target and copy in the Curr entry and aggreggated. Step 1: Copy the total Section entry to I / P Total Section and no step 1 project: copy converted into money - no need to translate entries all entries are in GBP step 2: copy entry GBP to Curr NA values

  *****************************************************************************************************************/

  DIFFICULTY (([["trois ans Budget"]]), ([["DGAllocation"]]), ([["FY15"]]), ([[Sun]]), @IDESCENDANTS ("BH - T"), "Curr NA", "basic", 'Entry in the currency', ' one - 6111 "," A - 6112 ',' A - 6113 ', ' a - 65 ',' A - 66 ',' A - 620905 ')

  DATACOPY 'Total Section' to 'Input_Total Section;

  DATACOPY 'Total Section' to 'no project ';

  ENDFIX

  DIFFICULTY (([["trois ans Budget"]]), ([["DGAllocation"]]), ([["FY15"]]), ([[Sun]]), @IDESCENDANTS ("BH - T"), 'Curr NA', 'Total Section', Section 'Input_Total', 'No project', ' base', ' a - 6111 "," A - 6112 ',' A - 6113 ',' A - 65 ',' A - 66 ',' A - 620905 ')

  DATACOPY 'entered currency' to 'convert currency (GBP);

  ENDFIX

  DIFFICULTY (([["trois ans Budget"]]), ([["DGAllocation"]]), ([["FY15"]]), ([[Sun]]), @IDESCENDANTS ("BH - T"), "Total area", 'Input_Total', 'No project' Section, "basic", 'Entered in the currency ", converted into currency (GBP)', ' a - 6111", "A - 6112 ',' A - 6113 ',' a - 65 ',' A - 66 ',' A - 620905 ')

  DATACOPY "Curr NA ' to 'entry GBP;

  ENDFIX

  Second model:

  /****************************************************************************************************************

  FCOm_TargetAgg

  parm1 = scenario

  PARM2 = version

  parm3 = years

  parm4 = periods

  The purpose of this macro is to target data aggreggate Step2: aggregate data

  *****************************************************************************************************************/

  DIFFICULTY (([["trois ans Budget"]]), ([["DGAllocation"]]), ([["FY15"]]), ([[Sun]]), "basic", "Entered in the currency ',' converted to currency (GBP)")

  CALC DIM ("account", "BudgetHolder", "Admission tickets", "SectionProjects");

  ENDFIX

  In fact

  I just re thinking about your message. My comments above is not correct for your situation. The syntax above is correct if you are talking about the code 'in' the model itself (so if you open the template and look at the code). But if the code you have posted in your messages made from the window of script of the rule (in script view) then your problem is something different potentially.

  So the first thing is to make sure that in the model itself (open model), the PDT is defined in the global range or range of Member as [Parm1], [Parm2] etc. (or difficulty, depends on the way the model is shown) as I said in my first reply above, the model only defines the DTP, not members and must be placed between square brackets , as [Parm1}. Who will make that the DTP as defined in your model correctly. Then we need to look at how you define these PDT in the rule itself. Normally, it is much easier if your rule is in the chart view, as you just click on the model and you can enter the values. As you have your rule in Script mode, you must be very careful about how you set the values of the PAO. Every DTP 'type' has a different syntax in script mode.

  Looking at your script again I see another problem potentially. When you set the values in the DTP, the value must locking with double brackets, so [['three year Budget"]]. In your script, you must also in brackets. That is not always correct. There are moments between brackets and double square brackets is correct, but it is only when your DTP is of type 'Members', and by default, according to me, old macros of business rule translates into templates with the "Script" DTP types

  So, if you also change your business section where the models are defined as below; (as you can see, without parentheses around the DTP values).

  UPDATECALC OFF SET; AGGMISSG OFF SET;

  Model % (name: = "FCOm_TargetSection", application: = 'FCO', plantype: = 'FCO', dtps:=("parm1":=[["Three_Year_Budget"]],"parm2":=[["DGAllocation"]],"parm3":=[[{FCOrtpYears}]],"parm4":=[[Mar]]))))

  Model % (name: = "FCOm_TargetAgg", application: = 'FCO', plantype: = 'FCO', dtps:=("parm1":=[["Three_Year_Budget"]],"parm2":=[["DGAllocation"]],"parm3":=[[{FCOrtpYears}]],"parm4":=[[Mar]]))))

  The end of the game should be that when you open your rule and the view script and script tab then select low bottom your models should look as below, as you can see, everything that needs to be included in the script are the values substituted for the definition of the model, the key point is that there are no brackets or parentheses. The script should show script "pure". (I have highlighted and underlined how these 4 PDT should result in script mode)

  First model:

  UPDATECALC OFF SET; AGGMISSG OFF SET;

  /****************************************************************************************************************

  FCOm_TargetSection

  parm1 = scenario

  PARM2 = version

  parm3 = years

  parm4 = periods

  The purpose of this macro is to translate the target entry to GBP and copy of Curr NA and associate. Step 1: Copy the total Section entry to I / P Total Section and no step 1 project: copy converted into money - no need to translate entries all entries are in GBP step 2: copy entry GBP to Curr NA values

  *****************************************************************************************************************/

  DIFFICULTY ('Three-year Budget', 'DGAlocation', FY15, Mar, @IDESCENDANTS ("BH - T"), "Curr NA", "basic", 'Seized currency', '-6111 ", '-6112", "has - 6113", "A - 65", "A - 66", "-620905")

  DATACOPY 'Total Section' to 'Input_Total Section;

  DATACOPY 'Total Section' to 'no project ';

  ENDFIX

  DIFFICULTY ('Three-year Budget', 'DGAlocation', FY15, Mar, @IDESCENDANTS ("BH - T"), "Curr NA', 'Total Section', Section 'Input_Total', 'No project', 'basic', '-6111", '-6112 "," has - 6113 "," A - 65 "," A - 66 ","-620905 ")

  DATACOPY 'entered currency' to 'convert currency (GBP);

  ENDFIX

  DIFFICULTY (FY15, Mar, 'DGAlocation' and 'Three-year Budget', @IDESCENDANTS("BH-T"), 'Total Section', Section 'Input_Total', 'No project', 'basic', 'Entered in the currency "," converted into currency (GBP)', '-6111 ", '-6112", "-6113", "A - 65", "A - 66", "-620905")

  DATACOPY "Curr NA ' to 'entry GBP;

  ENDFIX

  Thank you

  Anthony

• Essbase Error (1200370) when executing business rule

  Hello
  
  
  I get the error: cannot calculate. Essbase Error (1200370): formula [average] runtime error (line 15): attempt to cross a member function [@X] null
  the performance of the following script.
  
  Fix (@relative("AltHierarchyProducts",0))
  Fix ("FY13", "Draft1", "budget")
  
  'Medium' = @MEMBER (@CONCATENATE ('P', @NAME (@PARENT (@CURRMBR ('products')))-> 'Variable' * (("Sales"->"Month1+"Sales"->"Month2"+"Sales"->"Month3")/3);))
  
  ENDFIX
  ENDFIX
  
  'Variable' is a member of the dimension account. When I remove the part '-> "Variable'", the script runs, but obviously no results since the Member account is missing.
  I've read a lot of posts about this error but could not solve this problem.
  
  
  A view of the hierarchy database is as under-
  Products-
  AltHierarchy
  -Cat1
  -Prod1
  -Prod2
  -Cat2
  -Prod3
  -Prod4
  PCat1-> "Variable" and "Variable" Pcat2 are placeholders that stores the values of the variables.
  
  Help, please.
  Thank you.
  
  Note: I use Essbase 11.1.2.1

  Is it possible that your function @MEMBER returns never really what anyone. You assumed that it works, but maybe it never works and it is only when you add the cross-dimensional operator, the question becomes obvious.

  for example if this does not work:

  Without cross Sun: 'Medium' = @MEMBER () * (("Sales"->"Month1+"Sales"->"Month2"+"Sales"->"Month3")/3);
  I'm not sure but maybe above returns something like #missing * (("Sales"->"Month1+"Sales"->"Month2"+"Sales"->"Month3")/3)

  With Lacrosse dim:
  "Medium '= @MEMBER ()->' Variable ' * (("Sales"->"Month1+"Sales"->"Month2"+"Sales"->"Month3")/3);
  Which I suppose would fail.

  You know what I mean? You could test this theory quite easy.

• Error using @ATTRIBUTEBVALUE

  Hello

  In the calculation Manager, I do the following

  IF (@ATTRIBUTEBVAL(ActiveProject) == False)

  @RETURN("Project is not active",ERROR);

  ENDIF

  
  

  Validate in the calculation Manager returns the following:

  
  

  An error occurred in: rule: HYP_GBM. Plan1.budget by quantity / value
  'ActiveProject' dimension must be a dimension Boolean attribute...

  In Essbase and planning, I have confirmed that it is a dimension of the Boolean attribute. Any idea on what is the cause?

  Thank you

  
  

  
  

  OK, this one is also a bug that runs on Oracle:

  • Bug 17993870 : FUNCTION of CALC MGR @RETURN WITH WEBFORM ON the PLANNING ERRORS
  • Bug 18250866 : GET ADF_FACES:60097 PRT IS HIDDEN AND @RETURN FUNCTION USED IN THE RULE
  • Bug 18233568 - CUSTOMIZATION of the error MESSAGES IN THE BUSINESS RULE

• How to outsource reference data to the business rule processor?

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  By default, the reference (rules, controls and conditions) data used by the business rule processor comes to an excel file or stored in the repository database of the Disqualification.

  Is it possible to use a reference to the data that is stored in a different database (out of the repository database Disqualification) in the processor rule business?

  I tried the externalize option in the processor business rule, but on the identity tab, it is not allow me map the rule to the input attribute.

  

  

  Hello

  You can manage the rules from the outside, but you need to instantly and use research on stereotypes, because the rules of Business Check needs access to the rules at design time.

  -Mike

• distribution and business rule

  Hi guru
  
  Can we use allowance and business rules in essbase?
  It can be used only in the planning?
  
  can you please help me with this
  
  Thank you

  HBRs are BSO cubes only.

  You can launch HBRs four different ways (may be more or less applicable to you):
  (1) starting at EAS - it is for admins only
  (2) of SmartView
  (3) to a form of planning (I know, you're not in the planning, I simply mention it for completeness) good, technically true, but you must have a connection schedule to do this, and you said Essbase, do not intend.
  4) there is a pitcher of Web of trade rules. See: http://download.oracle.com/docs/cd/E17236_01/epm.1112/hbr_web.pdf
  (5) apparently I'm a bad meter. For ODI, see: http://john-goodwin.blogspot.com/2009/07/odi-series-executing-hyperion-business.html

  I'll bet that #4 is what you want.

  You can certainly use against plain old HBRs Essbase BSO. It's your choice if you use graphics or improved calc scripts.

  Kind regards

  Cameron Lackpour

  PS It is also Manager of Calc, if you are so inclined.

  Published by: CL on June 4, 2010 13:20
  P.P.S. You can watch this thread: How to run a business of Hyperion Essbase Excel planning rule

• Business rule to launch using the command line

  I tried lauching business rule by using the command line utility CalcMgrCmdLineLauncher.cmd. The syntax I used is \Planning\planning1 > CalcMgrCmdLineLauncher.cmd A:Samp U:admin D:PL /R:AGGR F:Agg.xml. I get the following error when executing the command-
  
  FATAL error: Cannot run getRTPs(). Cannot find the rule AGGR deployed in the type of plan PL in the repository
  com hyperion.calcmgr.common.CalcMgrODLLogger logServereMsg
  
  I selected the correct application of planning in the locations tab and assigned administrator privileges on the tab of the business rule access privileges. I followed all the instructions in the link - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/frameset.htm?ch06s09s05.html to run BR by command line.
  
  Please let me know the reason for this error...

  No, you can use the CmdLnLauncher utility located in the installation of Regional service directory, it will be under eas\console\bin

  To get instructions on how to use it, then take a look on-- can not run business with bat file rule

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase business rule error

  Hello
  
  Creating business rule in essbase I get error while combining the outline of essbase next server:
  "Essbase 172.18.28.74 server connection error".
  
  My essbase server running and I m able to open the application, write scripts of calc etc.
  Any idea?
  
  Thank you

  You create a company that uses a planning connection or through essbase, for problems with the company rules I have suggestions you connect to "My Oracle Support" and search for Doc - id - 763345.1

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Strange error when you try to validate a business rule

  I get this strange error when I try to validate a business rule:
  
  Details: cannot calculate. Essbase Error (1200369): error optimize [69972] formula (line 38): cannot cross the same dimension members
  
  
  The rule is:
  
  DIFFICULTY (@RELATIVE ("SG & A", 0))
  '69972' = (("60001"-> "C1130"-> "Tous les projets"-> "Tous les employés») + ("69971"-> 'C1130'-> 'All projects'->"All employees")) * ' SG & a % of C1130 '-> 'No cost center'-> 'PNULL',-> 'no employee" * (("Effectifs"->"Tous les projets"->"Tous les employés»)-(«C1130 «->» effectifs»-> «Tous les projets»-> «Tous les employés»)) / (("Effectifs"->"SG & A"->"Tous les projets"->"Tous les employés»)-(«C1130 «->» effectifs»-> «SG & A»-> «)) ((All projects"->"All employees"));
  
  ENDFIX

  Msg of error indicates that you have used the operator of crossdim with the Member of the same sun. Cross the check again.
  EX:
  'C1130'-> 'Numbers'-> 'SG & A'-> 'All projects'-> 'all employees '.
  Are all these members belong to various dimesions?

• Problem with business rule-Essbase Error (1042017):

  Hello
  
  I get the following error when I run this business rule specifically.
  
  Details: cannot calculate. Essbase Error (1042017): network error: the client or the server timed out while waiting to receive data by using TCP/IP.  Check the network connections.  Increase the values NetRetryCount or NetDelay in the ESSBASE. CFG file. Update this file on the client and the server.  Restart the client, and then try again.
  
  I don't understand this error with any other rule. I checked the solution provided in this link
  _ [http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_error/erhelp.htm#ercalc.htm]. But this solution does not help because I do not get this error in any other rule.
  
  The rule that I run is
  
  'Depreciation value' = "Value Cumulative.Asset" / ("Assumptions_Programs"-> Jul-> @UDA (Entity,@NAME (@CURRMBR (rental))) - > @UDA (Location,@NAME (@CURRMBR (rental)))-> 'Active life in months');
  
  The functions in the above rule will not be replaced as below
  
  "Depreciation value' ="Value Cumulative.Asset"/"Assumptions_Programs"-> Jul-> IND_Assumptions-> LOC_IND->"active life in months. "
  
  If I hard code and run, I do not get this error. Help, please.
  
  Kind regards
  Brig.

  The reason why it works when you hard code and why it does not use when the UDA is simply that you should never have a multiple responses in a dimensional cross. Function @UDA returns multiple responses. Although in your case he brings only one I think it fires the calculation. Worse if you are actually bring multiple responses for @UDA that certainly isn't going to work.

  I understand all your corrections above the calcultion to recommend the best possible solution. But at least you understand why you get the error and you have difficulty

• error of business rules

  When I am clicking on business rules then iam getting the following error message
  
  Error connecting to business rules. The repository has not been configured, or you are not authorized to use business rules
  
  detail: error creating DBConfig object.please check if HBR is configured correctly
  
  I login as an administrator.
  
  can someone help me with this

  I recommend you connect to My Oracle Support and have a read of the doc - id - 763345.1
  It goes through different options to solve the problems of trade rules.

  See you soon

  John
  http://John-Goodwin.blogspot.com/