Error UUID trying to convert VMS

Similar Questions

• I tried to convert a virtual disk in Extensible with vmware-vdiskmanager, but an error...

  Hello

  I tried to convert a virtual disk in Extensible with vmware-vdiskmanager, but an error...

  

  ' Could not convert the drive: the system cannot find the specified file < 0 x 1900000004 >. '

  No idea what lack us.

  I read a few threads on this subject and they say to delete all snapshots. Don't have any as soon as I used the vmrun program to list all snapshots for this virtual machine and it returned 0.

  can someone help me with this?

  Thanks in advance,

  Rui

  It seems that there is typo in the file extensions of the virtual disk, i.e. '.vdmk' instead of 'hard '!

  André

• I'm trying to convert a word doc into a pdf file (which I've done 100 times) but now when I connect and press 'convert' after selecting the file it gives me a error message that says "player doesn't have the ability to access this service?

  I'm trying to convert a word doc into a pdf file (which I've done 100 times) but now when I connect and press 'convert' after selecting the file it gives me a error message that says "player doesn't have the ability to access this service?

  Install and use Acrobat Reader DC. You can not use previous versions more.

• I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  Hey lee,

  Are you still facing this problem?

  Have you tried accessing the service by using the browser: http://cloud.acrobat.com/exportpdf

  Kind regards
  Rahul

• VMware Converter refused while trying to convert the Linux server

  Hey all, I'm trying to convert a Server CentOS 6.6 Nagios in a virtual machine on a cluster of ESXi 5.5.0 and not having a chance. When I try to start the conversion I get following error message:

  [Code] Permission to perform this operation was denied [/ code]

  I use VMware vCenter Converter Standalone server Version 5.5.3 Build-2183569 and I am doing the server Linux my VMware vCenter Server, Version 5.5.0 Build 2001466. I thought I could use the wrong password but I can't able to root very well on the Linux server. Iptables is off and Selinux is disabled. I played with the free version of ESXi and now I'm under more Essentials. I Googled it and found a lot of answers, but none of them fit my situation. Here, any help would be greatly appreciated.

  Thank you

  Joe B

  If you run the client VMware Converter from a Windows OS, try running with the help of the high privilege (Run As Administrator): http://www.jonathanmedd.net/2013/12/vmware-converter-permission-to-perform-this-operation-was-denied.html

• I'm trying to convert pdf to word, he says no internet connection, but I am connected. Any ideas?

  I'm trying to convert pdf to word, he says no internet connection, but I am connected. All ideas

  Please see the answer in the following thread.

  no internet connection error

  Sorry for the inconvenience.

• Converter does not reach 1% - "an error occurred during conversion:"converter.fault.ConverterFileFault"

  I'm trying to convert a laptop of ageing of a virtual machine, but it does not reach 1% with the vague error "an error occurred during conversion:"converter.fault.ConverterFileFault. "

  With VMware vCenter Converter Standalone Client 5.5.1 build 1682692 locally running the conversion of the machine running.

  On a laptop with WinXP Sp3, with a single drive, by recording the VM on a USB hard drive attached.

  I have run chkdsk on the drive. (with the F option) and defragmented several times

  Shadow copy services have been restarted and are running.  I even downloaded the VSS SDK and replaced the *.dll.
  It is with the latest version of the client converter

  No firewall is active.

  I am logged on as administrator, even tried to create a role of administrator with the name "Administrator".

  Drive is not encrypted I can say (no Truecrypt)

  The xp includes backup works (i.e. work VSS)

  I looked at the other questions/logs here, but do not see the same exact

  VMWare Converter error: impossible to clone the volume C

  Converter fails at 1%

  UPDATE: Solution via Hack
  I could get this job sort of a hard-working hack.

  I first downloaded Acronis image 2014 (a free 30 day trial) then who used to capture the image of the operating system, the * tib file is about 40 GB in size.

  Unfortunately VMWare converter works only with version of Acronis 2012, so the *.tib file could not be used directly to the source of the virtual machine

  So I created inside VMWare Workstation a new empty VM for Windows XP

  I gave her 2 virtual disks hard 50 GB and 50 GB mapped as C: and H:

  reinstalled windows in the C

  copied the *.tib in the secondary hard drive H: as shared folders (for example how a USB is sometimes mounted) are not accessible when the Acronis is restoration of the tib via its custom BootLoader

  Download and install Acronis image 2014 on this new fresh OS

  used Acronis to restore from this backup on H: * tib in the C: crush installing the OS

  reactivated again, windows

  fighting pilots who the real differeed

  Defragment the drive VMware

  Seems to work as expected.

  I got this job, see the update on the use of Acronis to work around the problem.

• Get the mistakes reached Maximum Volume Snapshots, trying to convert VMDK XP system hotcloning with converter last worm

  Hi I get this error reaches Max Volume Snapshots re trying to convert VMDK XP system with converter hotcloning latest version 5.5.1. Error results in the conversion of a physical machine to fail at 1%.

  I'm trying to convert a drive with a dual boot XP - 2 Xps on it for a Player 6 - a VMware VMDK as a C partition with W98SE original who no longer use.  The C partition has the bootloader boot ini for the dual Xps located on J and I have partitions.  Other partitions on disk cloning whole (need set as Xps access these disks at startup are: D, E: Docs program and shared (a logon for XP user profiles) and F, G and H (contains HD virtual 98SE VirtualPC) partitions.)

  I'm running a chkdsk /f /r on all partitions and deleted snapshots of volume system (from system restore) and disabled the system restore in case that is the question.  I also tried to disable firewall as shown in the manual and stop several 3rd party services to run.  Do not use additional options when cloning.  Target is a 1 to free space (more copy partitions/disc) on a USB external drive '3 '.

  I tried also with just J and no Partition selected with others and same error so not deliver the prob a system double - but do not know if the two will be not bootable in Vm together via boot ini choose as yet have on the physical machine.  Anyone know if this still works as a dualboot on VM or should I be cloning each with C separately like J or I become C as their drive letters are associated with many years of program installs don't want again.  Not sure if can fix these at the same time to be able to start or if on separate drives in the VM and always have access to all other partitions of two Xps - someone knows how to do better?

  Also re my mistake - it's mainly what need fixed so he can achieve it - or it will be allowed to do this conversion coldclone via Windows 8.1 I on another drive - however C drive I need appears as a V as W81 is C on the host.  This will allow even a dual boot VM or at least one of the Xps or bootable drive v - maybe if I move it to C partition 1st position when copying VMDK?  Please keep in mind I have no job and only will use VmWare Player 6 or try in VirtualBox or Hyper-V on the host Windows Pro 8.1 if VmWare Player fails.

  Thank you, but I had already done this and always says without clichés or none - questions - after even managed to fix my COM + install as well.

  Alternative SOLUTION for those who have problems making their host Xp Vm hotclone

  I finally used MOA Cold Clone ISO converter to make a virtual machine of my XPs and related partitions and now finally it seems to work after the configuration of the virtual machine created with the latest Vmware converter 5.5.1 (just to add Vmware Tools and remove selected restore points) via my host Windows 8.1 (such that it is impossible to configure via MOA but fact VM thin image).

  Anyone with problems of manufacturing since their host XP VM and if want to make a VMware Player image - search the Internet for MOA Cold Clone converter (it uses a worm old VMware Converter 3 that allows cold cloning, I think that later to not)-it was relatively easy to install and use.

  I could also dual boot via the boot ini file as before my 2 XP systems.

  Make sure you just prΘconfiguration your ini file to start I did before the virtual machine to the physical host partition is on - I've added a few other partitions to start from tests in case of boot partition number has changed as he did.

  For example: my Xp scores came after the 1st Partition C (boot ini containing the partition) and also a 2nd Partition - D and 3rd Partition - E (I left out F and G as agreed is no need as on the host) so my first XP became Partition 4, then 5 other XP Partition so in boot ini, I had put this :

  [boot loader]

  Timeout = 10

  default = multi (0) disk (0) rdisk (0) partition (5) \WINDOWS

  [operating systems]

  "multi (0) disk (0) rdisk (0) partition (5) \windows="XP Pro SP3 HAND J - C Bootini "/ EAP/fastdetect / 3 GB USERVA 2560/noexecute = OptIn

  "multi (0) disk (0) rdisk (0) partition (4) \windows="XP REPLACEMENT / OLDER I DRIVE - ADMIN USE ONLY - repair/rescue/Backup "/ PAE USERVA 2560/fastdetect/noexecute = OptIn

  multi (0) disk (0) rdisk (0) partition (6) \windows="TEST PARTITION 6" / EAP/fastdetect / 3 GB USERVA 2560/noexecute = OptIn

  multi (0) disk (0) rdisk (0) partition (7) PARTITION 7 "\windows="TEST / EAP/fastdetect / 3 GB USERVA 2560/noexecute = OptIn

  multi (0) disk (0) rdisk (0) partition (8) \windows="TEST SCORE 8" / EAP/fastdetect / 3 GB USERVA 2560/noexecute = OptIn

  multi (0) disk (0) rdisk (0) partition (9) \windows="TEST PARTITION 9" / EAP/fastdetect / 3 GB USERVA 2560/noexecute = OptIn

  Test scores from 4 as I thought new shoe that would be 4, then 5 and then others added in case

  You will need to change the number depending on how much other partitions are in front of your XP ones.

  I used free Easeus Partition Manager to control the order of the partitions I was cloning the drive.

  A free EasyBCD allows you also to modify and label your partitions to change your boot.ini file easily once you start in the right partition to boot ini that you set up above and before that you do / clone your Virtual Machine.

  Note: the boot ini can only contain a limited number of registrations or bloodlines tests then you partition carefully probably not exercising that your operating system will be on after cloning a Vm.

• an error occurred trying to access the service

  I wonder why I bought a year subscription to Adobe Reader to convert PDF files to Doc files, when it WORKS and no one seems to be able to help me! I'm on a Mac Book Pro with Yosemite (do not upgrade it slows down your Mac evil) and whenever I try to convert a pdf file to a doc I get "an error has occurred while trying to access the service", can someone help me please?

  Hi Cedric,

  The customer service number is 800833687

  Is the direct link to chat: http://adobe.ly/19llvMN

  You must click on 'Still need help' to start the chat session.

  You get this error: "year error occurred trying to access the service", all trying to access the service by the reader.

  Try to use the link: https://cloud.acrobat.com/exportpdf log in with your Adobe ID and try to convert a pdf file to doc and check if it works for you.

  Agress,

  Rave

• I'm trying to convert a PDF file to a Word Doc.  I click on convert and then connect and it says can not find the network.

  I get a network error when I try to connect to the sidebar of a PDF file that I am trying to convert.  How can I fix it?

  Hi christinemsd,

  Looks like you can try to access the service through Adobe Reader. What happens if you connect directly to https://cloud.acrobat.com ?

  Best,

  Sara

• Error 1034 trying to save.

  I was going to post this in the bug report form, but Adobe Muse is not listed.

  The error is simple, when I try to save my progress, I get this error. "Error #1034: could not convert...". "as pictured below. After clicking OK, the program crashes. When I reopen it Muse, he once prompted me with a different error (unfortunately did not record the error #) but I was unable to reproduce this error as rather now it asks just to try to recover my last action.

  The error appeared if stop after 4 tries to save, and I was able to save under a different name and does not replace the old one. I tried to recreate the error with other files, but without success.

  

  UPDATE:

  After the opening of the 2nd copy of the file, I received this mentioned error rain high, but could not recreate. I got this 4 'missing links' WARNING since I added a new photo gallery. I don't know if it's a bug from the engine of Gallery or just how files are stored on my server. In addition to the error, I noticed a few other 3 random files and files of muse.

  

  Thanks for the detailed post. Please send the file MuseLog.txt of the 'Documents' folder to my attention at [email protected]. I would like to see what additional information it contains about the errors you encounter. Thank you.

• Unknown error returned by VMware Converter Agent - Windows 7 RC

  I am trying to convert a physical machine to Windows 7 RC in a virtual machine using Coverter from VMWare. I tried an earlier version and their latest version, but the results are the same. I pass all parameters and all correct credentials and start the conversion. After 1%, I get the "unknown error returned from Agent VMware Converter". I enclose my log file.

  Are you sure that you have the required permissions?  I pulled this out of newspapers

  2009-06-09 14:58:22.806 error 3188 'App' VmiImportTask::task: The task of Image processing failed with MethodFault::Exception: vim.fault.NoPermission

  see this KB too

  http://KB.VMware.com/kb/1007265

• What is a 60 error when trying to share an iMovie on a disk?

  What is a 60 error when trying to share an iMovie on a disk?

  I have no idea what to do, but I was able to track down the actual error = "error-60 badMDBErr: bad master directory block"

  I could see the results of Google that dates back years for [imovie error "60"] - without parentheses

  ATTENTION: a result leading to a YouTube video was a veiled MacKeeper scam! Do NOT use MacKeeper or any other software!

• Internal server error when trying to connect Facebook to Toshiba Places

  I'm looking for help with a problem I've met by using my toshiba SMART tv. I can't link my Facebook to my toshiba places account, it shows "internal server error" while trying to connect via the link given in the statement in the email I received.

  Can someone please help?

  Internal server error means that there is a problem with the server and nothing worng with your account.

  No doubt some temporal problems of the server recommend you simply wait until this problem could be solved.

• Why I get this error message: error while trying to synchronize audio and midi?

  I just updated Logic Pro and all of a sudden my lexicon alpha interface does not work correctly.  I get this error message: error while trying to synchronize audio and midi. Check for conflicts between Logic Pro and the external device. Help

  Start by making sure that the project in logic settings are set correctly - I think that the lexicon only supports 44.1 or 48.

  If it is software used to Setup place the lexicon make sure you that the sampling frequency is set to the same logic.

  Sometimes that power and the lexicon solves the problem...

  If none of the help above - make sure you use a multi-out or comprehensive audio device (OS X)