error variable

You can see when I run this application it gives me an error when I put variables

Remove settlers from here-

  1. WHERE cc. SEGMENT_CODE =: s.SEGMENT_CODE
  2. AND s.SEGMENT_CODE =: ps. SEGMENT_CODE

Tags: Database

Similar Questions

  • Error variables look a tab after race change the user interface

    Hello

    I have a problem which seems to be a bit like this:

    http://forums.NI.com/T5/NI-TestStand/error-viewing-variables-tab-in-runtime-operator-interface/m-p/1...

    The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.

    The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.

    This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?

    Thank you

    -Josh

    Josh-

    Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.

    I hope this helps and I'm sorry for any inconvenience this issue may cause you.

  • Shared library error Variable deployment-2147220735

    I had to reinstall my whole LabVIEW installation, where my SSD was about to fill. I uninstalled everything and freshly installed everything on a larger hard drive. Unfortunately, I now get an error message and am wondering what I have to reinstall.

    When I want to deploy a library shared in LabVIEW 2014 32-bit Variable, it returns an error:

    Initializing...
    Calculating dependencies...
    The checking for conflicts. This may take some time...
    Prepare the items for download. This may take some time...
    My computer deployment
    Deployment deployment test.lvlib\\10.0.10.45\test failed (error:-2147220735, MAX: internal error (Hex 0 x 80040301): the specified class is not found in the configuration database.) Your installation may need to be repaired.).
    Completed with errors of deployment

    Any suggestions?

    Have you tried a repair, which sometimes works but sometimes a completely uninstall and reinstall is necessary. Have you tried to repair only the proposed below KB file?

    http://digital.NI.com/public.nsf/allkb/67E896D850D988C286257811005FEFF5?OpenDocument

    As you can see the same error in Distributed System Manager the quickest solution would probably be to uninstall LV and the drivers and reinstall them just. If the KB above does not work.

  • error Variable D_TYPE is undefined.

    Hello
    I created a drop down that is supposed populated the db based on the shade of the option or g
    If nuance then insert the #D_TYPE field n #.
    on the other
    If ga g is inserted

    Here is the error below.
    I also have




    Here is the error.

    D_TYPE variable is not defined.


    The error occurred in j:\lk\ll\lak\dsp_admin.cfm: line 160

    158: < SELECT name = size AccessLevel = 1 style = "HEIGHT: 40px;" WIDTH: 178px ">"
    159:
    160: < cfoutput > < OPTION Value = "#D_TYPE #" > #D_TYPE # < / OPTION > < / cfoutput > "."
    161: < OPTION Value = "n" > nuance < / OPTION >
    162: < OPTION Value = "g" > ga < / OPTION >

    What should I do?

    Thank you

    Where are:

    -l' where you set d_type, and
    -your cfoutput tag
    ?

  • error: Variable QUERYTT is not defined.

    Hello I have this error on the application.

    Variable QUERYTT is not defined.
    The specific sequence of files included or processed is: Z:\dev\HD\dsp_TCQ.cfm, line: 136

    I then checked the line 136 and found
    < td width = "50%" > < police = "Verdana, Arial, Helvetica, sans-serif" color = '006666' point-size = "12" > < b > #QUERYTT # < /b > < / font > < table >

    its supposed to be there.

    I just wanted to know.

    I copied (DO NOT CUT) all files in this directory to another drive as a backup.

    This could be a problem. JUST A COPY AND PASTE.
    Help
    Thank you

    Is your statement of the "QUERYTT" variable inside an IF statement. If the IF condition is not satisfied you will get the variable to be undefined.

    Maybe it's not the exact reason. But you can check.

    Thank you

  • Error variables.

    I use Oracle 10 g on HP - UX, try to bring a proc stored for Delphi XE2.

    It comes to my proc

    ----------------------------------------------------------------------------------------------------
    PROCEDURE SRCH_FACILITY (P_FACILITY_TYPE IN VARCHAR2,
                         P_BUSINESS_UNIT IN AFFILIATION.BUSINESS_UNIT% TYPE,
                         P_PROG_NBR IN AFFILIATION.PROG_NBR% TYPE,
                         P_FACILITY_NAME IN VARCHAR2,
                         P_CITY_OR_ZIP IN VARCHAR2,
                         P_SPECIALTY IN AFFILIATION.SPEC1% TYPE,
                         P_YMDEFF IN AFFILIATION.YMDEFF% TYPE,
                         P_USE_STATE_DIR IN CHAR,
                         P_INTERNAL IN CHAR,
                         P_RESULT OUT PKG_CW_TYPES.T_CURSOR) AS
  V_HOLDSQL1  VARCHAR2(8000);                         
BEGIN 

OPEN P_RESULT FOR CREATE_FACILITY_STRING (TRIM(UPPER(P_FACILITY_TYPE)),
                                          TRIM(UPPER(P_BUSINESS_UNIT)),
                                          TRIM(UPPER(P_PROG_NBR)),
                                          TRIM(UPPER(P_FACILITY_NAME)),
                                          TRIM(UPPER(P_CITY_OR_ZIP)),
                                          TRIM(UPPER(P_SPECIALTY)),
                                          TRIM(UPPER(P_YMDEFF)),
                                          TRIM(UPPER(P_USE_STATE_DIR)),
                                          TRIM(UPPER(P_INTERNAL)))
    USING
            P_FACILITY_NAME,
            P_CITY_OR_ZIP,
            P_CITY_OR_ZIP,
            P_YMDEFF,
            P_YMDEFF,
            P_BUSINESS_UNIT,
            P_PROG_NBR,
            P_YMDEFF,
            P_YMDEFF,
            P_SPECIALTY, 
            P_SPECIALTY;
 
END;  --END SRCH_FACILITY
    -----------------------------------------------------------------------------------------------

    My variables are:

    P_FACILITY_TYPE: = EMERGENCY;
    P_BUSINESS_UNIT: = 01;
    P_PROG_NBR: = CS;
    P_FACILITY_NAME: = NULL;
    P_CITY_OR_ZIP: = NULL;
    P_SPECIALTY: = NULL;
    P_YMDEFF: = 20120705;
    P_USE_STATE_DIR: = F;
    P_INTERNAL: = F;

    ----------------------------------------------------------------------------------------------------
    And it's the string, it tries to run with these variables.
    SELECT DISTINCT 'Map' AS Map,
        P.INSTNAME PROV_NAME,
        P.PROV_NBR,
        A.ADDRESS1,
        A.CITY,
        A.STATE,
        SUBSTR(A.ZIP,1,5) AS ZIP,
        FORMAT_PHONE(A.PHONE1) AS PHONE1,
        ' ' AS SPECIALTY,
        ' ' AS HOSPITAL,
        ' ' AS GROUP_NAME,
        ' ' AS LIMITS,
        ' ' AS LANGUAGE,
        ' ' AS COMMENT1,
        ' ' AS NETWORK,    
        ' ' AS PROVCATDESC
  FROM AFFILIATION F
    INNER JOIN PROV_INFO_M PI ON ((CONCAT('AF',F.AFF_NBR) = PI.PROV_WHO) AND (PI.ADMIT_ASSESS = 'Y'))
    INNER JOIN PROVIDER P ON ((F.PROV_NBR = P.PROV_NBR) AND ((1=1) OR (:P_FACILITY_NAME IS NULL)))
    LEFT OUTER JOIN CWEB.MV_PROVIDER_ADDRESS A ON ((F.PROV_NBR = SUBSTR(A.ADDNO||' ',1,12))
                                               AND ((1=1) OR (:P_CITY_OR_ZIP IS NULL))
                                               AND ((1=1) OR (:P_CITY_OR_ZIP IS NULL))
                                               AND (A.BUSINESS_UNIT = :P_BUSINESS_UNIT)
                                               AND (A.PROG_NBR = :P_PROG_NBR)
                                               AND (A.YMDEFF <= :P_YMDEFF)
                                               AND (A.YMDEND >= :P_YMDEFF))
 WHERE (F.BUSINESS_UNIT = :P_BUSINESS_UNIT)
   AND (F.PROG_NBR = :P_PROG_NBR)
   AND (F.STATUS_X IN ('IP','S1'))
   AND (F.YMDEFF <= :P_YMDEFF)
   AND (F.YMDEND >= :P_YMDEFF)
   AND (F.VOID = '  ')
   AND ((F.EXCEPTION_FEE NOT IN ('INVALID','TERM','PEND')) OR (F.EXCEPTION_FEE = '  '))
   AND (F.PROVCAT = 'ER')
   AND (F.HAT_CODE = 'ER')
   AND (F.BUSINESS_UNIT = '01')
   AND (F.PROG_NBR = 'CS')
   AND ((1=1) OR (:P_SPECIALTY IS NULL))
   AND ((1=1) OR (:P_SPECIALTY IS NULL))
   AND (F.CLAIM_TYPE = 'D')
    -----------------------------------------------------------------------------------------------------

    When I try to run the program, it comes back with an ORA-01008: not all variables. I can't find the variable requested. At this point, it's probably too obvious like a rose in a field of snow to everyone except me. Suggestions, comments (not average they were) gratefully appreciated.

    You are missing the first business unit and prog variable numbers

                                                   AND (A.BUSINESS_UNIT = :P_BUSINESS_UNIT)
                                               AND (A.PROG_NBR = :P_PROG_NBR)

    I can't for Hoover, personally I would not like to debug something as clever , because it is.

  • Error variable S_PATCHPRODLOCATION YES-10150

    Dear Sir.

    I have installed Oracle 10 g on Linux (10.0.2)
    I just downloaded version 2 patch whichi is 10.2.0.4 and installed there are 2 innstances running on my computer I just install it on an instance of db_2 it installed sccessfully after installation in the first degree, which is called db_1, I got error that is mentioned on the subject.
    kindly help me as soon as possbile.

    Thank you
    Adeel Imtiaz
    NetSol technology
    111448800 Lahore

    I recommend that you log an SR with Oracle Support to clarify this note.

  • Why DB_PLImpotExportProperties does not throw "variable name or an unknown property.» (Error =-17306) » ?

    When I run GenericImportExport.seq, the call to DB_PLImpotExportProperties brings up the Import/Export dialog box. When I copy this step in my existing sequence, the error "variable or property name unknown." (Error =-17306) "is thrown. I see no difference between the two. They also seem to be running in the same environment.

    Any suggestions?

    As a result of the message:

    The DLL is not able to find a variable and therefore error. You can check the code to:

    C:\Program Files (x 86) \National Instruments\TestStand 2010 SP1\Components\StepTypes\Database

    However, you can copy the step itself in your sequence (rather than calling the sequence) and its variables.

    It will work. The DLL uses Teststand-local variables.

  • array variable error a number of clues or the beach size incorrect index overflow

    I get the following message appears at the beginning ' error: variable table a number of clues or overflow from the beach size incorrect index "how to get rid of this problem?

    It sounds like something you have running at startup fails because it was written wrong. You need to know what it is. First of all, make sure that the computer is free of viruses/malwrae by making a scan.

    http://www.elephantboycomputers.com/page2.html#Removing_Malware

    Then, if the computer is clean and the problem persists, troubleshoot your startup.

    Start > run > msconfig [Enter]

    This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

    How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

    The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

    (For Vista) Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista it will be blocked by Windows Defender and you will need to enable it so you can then check the box that says in effect, "don't mind to this subject again".

    The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
    MS - MVP - Elephant Boy computers - don't panic!

  • Error using variable presentation of Expression SQL

    Hi all

    I get an error - '... Error to break information... "due to a variable used in a SQL Expression. It probably has something to do with a problem of data type. I have reduced the use of the presentation of the error variable.

    I'll put a variable pres_mth_nme_to, presentation, from a prompt of dashboard. The line contains a month name.
    I use the variable of presentation as part of a SQL Expression in a filter. Most of the SQL Expression is to use the
    presentation in ONE variable and assign a value accordingly. For example:

    Column: kind of month value
    Operator: between
    Value: * 10 *.
    SQL expression: * case @{pres_mth_nme_to} {a few default} WHEN "NOV" THEN '10' WHEN 'DEC' THEN '11' WHEN 'JAN' THEN '12' WHEN 'FEB' THEN '13' WHEN... END *.

    The name of the month is in character. If I was in this hard-coding, I don't get the error. For example:
    CASE 'SEP' WHEN 'NOV' THEN '10' WHEN 'DEC '... END

    It is something to do with the data type of the command prompt and to be used in the comparison. If I use a CAST, the problem persists.

    CASE DROPS (@{pres_mth_nme_to} as char (3)) WHEN 'NOV' THEN... END

    If I'm in the responses, the problem does not exist, I guess because of default values. If I'm on the dashboard, there is not, I guess because of the reception of the prompt value.

    I don't know what I'm missing. Any suggestions?

    Thank you.

    DJ,

    If the formula presented by you is exactly true, I mean that it was not made to present as an example in the forum, you must include the variable presentation between apostrophes.
    either your formula should look something like
    Case ' @{pres_mth_nme_to} {a few default}' WHEN 'NOV' THEN '10' WHEN 'DEC' THEN '11' WHEN 'JAN' THEN '12' WHEN 'FEB' THEN '13' WHEN... END

    Let me know if it solved the problem...

    -bifacts
    http://www.obinotes.com

    Published by: bifacts on October 25, 2010 13:50

  • Errors with Global Variables

    For those of you who use global variables in your projects, is there anyone who has encountered the following error, probably after renaming a project?

    "ERROR: Variable (the variable name is shown here in parentheses) is not defined."

    For each version of the software, I simply rename the project to the new version... e. g, 2.1, 2.2. In point 2.2, I noticed the error above on several pages (had started using a 7 HR with this project). I contacted the HR technical support and they said that something was wrong in my project. I went on the task to access all pages where errors were located, typed a character, deleted, and that fixed the problem. After everything has been fixed, then I renamed the project 2.3 and all of a sudden, I get errors once AGAIN and they are not yet on the same pages as before! I don't know what is happening, but I don't want to waste time every time I have rename the project of a new version.

    Any ideas anyone? Is there a better way to make versions than what I'm doing?

    OK, after that I corrected all the errors and renamed my project again, no problem has resurfaced. This leads me to believe that something has happened to the files when a developer and I were moving files in Visual SourceSafe, and I was checking stuff in one place, check in another another location, etc.. By doing all this, something must have happened to the global variables on 116 my 400 + help pages. At least if all goes well it's fixed for good now, because we won't have to move the files, and I always check in/out at the location, new.

  • GDR fails with "ERROR - IZU_TOP environment variable is not defined" on Windows

    When I try to run an OAM GDR I get this error "ERROR - variable of environment IZU_TOP is not defined. I saw this note:

    Solution:
    If make sure there is no file named "env" in or under $APPL_TOP.
    Ensure the standard UNIX command ' / usr/bin/env "is executed when you enter the UNIX command 'env' on the command line.
    This can be checked by, enter the following command at a command prompt:

    $ including env

    .. who should return something like this:

    / usr/bin/env


    .. but I'm on Windows and I do not have a/usr/bin/approx. When I check what env I get "E:\Oracle_Env_Tools\MKS\mksnt/env.exe".

    No idea how to fix this in Windows?

    Chris,

    I'll look into the patch, need me it?

    Because you have tried everything above without success, then I suggest you apply this hotfix.

    Kind regards
    Hussein

  • 'nvram boot-args' returns error

    According to this page:

    The mode of performance for OS X Server - Apple Support

    The command 'nvram boot-args' must return values including or not the performance Mode is enabled. However, what it returns is:

    "nvram: error variable getting - 'boot-args': data (iokit/common) has not been found."

    This means - it is simply not set, there is an error, or it is set to 0. I was expecting something like "serverperfmode = 0" If that were the case.


    Thank you


    The f

    It seems that as the value default serverperfmode = 1 is not defined, so rather than be serverperfmode = 0 it literally does not exist.

    You get the error message is compatible I think not having any boot-args fixed at all. I get this on my OS X Servers as well. I however get the following on my OS X clients.

    SH - 3.2 # nvram boot-args

    mbasd Boot-args = 1

    It's what I expected in our case, the above enables the Apple SuperDrive USB support and is an option that I enabled on all of our customers in the imaging process that I use.

    You might want to see the performance for OS X Server - Apple Support mode

    According to its wording I also interpreted as a confirmation that the default is that the performance mode is not enabled.

  • The undefined error FileDlgShow

    I can't get the FileDlgShow to work.  I get an error "Variable is undefined: 'FileDlgShow' every time I try to use it."

    I'm using version 10.2.  Here it is straight from exercise 5-1 in the Diadem Advanced course manual.

    Option Explicit

    Call DataDelAll (1)

    DlgState = FileDlgShow ("C:\Excercises\DIAdem Advanced\", "*.tdm")
    If (DlgState = "IDOk") then
    Call DataFileLoad (FileDlgNameList (0), ",")
    Call ChnSmooth("[1]/[2]","/Smoothed",12,"maxNumber")

    Call ChnPeakFind("[1]/[1]","[1]/Smoothed","/PeakX","/PeakY",5,"Max.Peaks","Amplitude")

    Call DataFileSave ("Results.tdm", "CT")

    Call PicLoad ("Smooth_2")

    Call PicUpdate (0)

    On the other
    Call the MsgBoxDisp ("data loading was abandoned!")
    End If

    Hello!

    The FileDlgShow command does not part of the tiara 10.2. It has been implemented later in Version 11. You must instead use the voluminous FileNameGet command.

    Matthias

  • UCCX scripts, working with variables (variables to type?)

    Hello

    I've got script of unilingual IVR which distributes calls in two separate CSQ (services and logistics), based on the entry of the appellant in the IVR menu. Each QSC contains several agents. There is flow under script that checks if a current day is holiday (similar to the example of Cisco HolidayCheck.aef)

    Now, I have to extend this script and make it multilingual. Many aspects in the script as dates.xml to check, name of the CSQ (each lang have services and logistics), lang for IVR guests are exactly the same files wav localized to specific national environment in different directories called.

    My idea is to parse the input (IVR or by number called country-specific) and on this basis set a variable named input_lang (string) with the values 'en', 'sk' or other). Then set other variables for good localization based on this variable input_lang.

    I have customization variables:

    input_lang (String) = «»

    holiday_datelist (Document) = [DOC]

    ivr_lang (language) = [L]

    CSQ_service (String) = «»

    CSQ_logistics (String) = «»

    When I set input_lang variable, for example "sk" (Slovak), I have other variables defined as:

    Set holiday_datelist = "DOC [dates -" + input_lang + ".xml]".

    Set ivr_lang = 'L []' + input_lang + '] '.

    Set CSQ_service = '-CSQ_servis' + input_lang

    Set CSQ_logistics = '-CSQ_logistics' + input_lang

    But this result in this strange values (not so weird, because they are all 'String-like')

    holiday_datelist = "DOC [dates - sk.xml]" instead of DOC [dates - sk.xml]

    ivr_lang = "L [sk]" instead of L [sk]

    etc... but the names of CSQs are also strings and the results are OK

    The script stops and throws a value unidentified exception / error variable.

    Y at - there no way how to fix string variable as lang/document as a representation? I think I have to get rid of these quotes in the beginning and the end of the value. I want only to concatenate the values of strings void variables based on each lang.

    Or me as a result of the wrong way and everything to do in a different way?

    Thank you very much for all the advice!

    (Improved UCCX, version 5.0.2)

    When I set input_lang variable, for example "sk" (Slovak), I have other variables defined as:

    Set holiday_datelist = "DOC [dates -" + input_lang + ".xml]".

    Set ivr_lang = 'L []' + input_lang + '] '.

    Set CSQ_service = '-CSQ_servis' + input_lang

    Set CSQ_logistics = '-CSQ_logistics' + input_lang

    I think that you are up to something and just need to make some minor changes.

    1. instead of assign the directory "dates - sk.xml" to the document variable, assign it to a string that points to the file name and the relevant path. Then initialize the document variable by using the step to "create a Document file. This should help you over any bumps with typcasting.

    2. for the language, it would be logical to use a statement 'switch' as follows:

    Channel switch (input_lang)

    Connection: Slovak

    Set ivr_lang = L [sk]

    Connection: en - uk

    Set ivr_lang = L [en - uk]

    ...

    Maybe it's not as effective as the road you have decided to take this point but it would work. The only time where I messed up with the support of several languages, I used the trigger JTAPI. It will work for you, if you have walked the road of the language based on the "called" number (as you suggest one way possible, you would take). In this way, you can have several triggers pointing to the same application and the variable of language may already be set on the trigger. You still wish to create/edit your variables. You'd probably want to focus on the expression editor methods. toString() and. getLanguage().

    HTH.

    Kind regards

    Bill

Maybe you are looking for