Error when connect with RMAN
When I connect to RMAN, gatting this errorRMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00554: initialization of the package manager internal collection failed
RMAN-04005: target database error:
ORA-01031: insufficient privileges
provide a solution to solve.
You need to connect with SYSDBA privileges: http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmquick.htm#BRADV89348
Tags: Database
Similar Questions
-
error when connecting with SmartConnection inCopy
Hello world
I had to install Adobe inCopy for Clients in my workplace. After installing it, I use a SmartConnection and an installer of fix to this issue. She successfully for almost all customers except one, I still get the error when connecting with the SmartConnection. When I open the event logs, he said that it is related to public.dll plugin.
I was installing it again and again and it's always the same error that pop up.
The customer is a 64-bit Windows 7.
Some help would be welcome.
Best regards
Problem solved
-
Error when connecting with the Remote Console
We get the attached error when you click on a paralytic to vCloud Director. The inner coating IP address is the ip address of the proxy console. Any ideas what might be causing this error? I thought, it might be something with my SSL certificate, but I'm not sure.
1. it's a Windows 7 view Client using IE 9
See the installation and configuration (https://www.vmware.com/support/vcd/doc/rel_notes_vcloud_director_10.html) guide, IE 9 is not supported, and only browsers supported on Windows 7 are Windows and Firefox 3.* 8.*.
2. it takes about 1 minute and 45 seconds, but the error pops up 2 seconds after the Remote Console window opens.
Certainly, that's the problem here. It shouldn't take 1 minute and 45 seconds for the remote console to pop up window, in fact, I would say that it should begin in a few seconds (certainly less than 10 seconds). You are not sure if it's because of IE 9?
4 see attachment log of error messages when trying to access the virtual machine
The error message looks like it tries to connect to my server vCenter. Do the users who are connected to vCloud Director must be able to connect on the server vCenter Server? I thought it would just use the user that configure you when you connect on the vcenter Server.
The console proxy (a component of the cell of vCloud Director) acts as a proxy for users connected to vCloud Director. It is the latter that connects to your vCenter Server server, and that's what you read in the papers.
Try this on any other OS/browser support matrix. In addition, if you can dig why it takes more than 10 seconds for the remote console to the pop-up window, you would have found yourself a solution. If this does not work, contact the Support of VMware.
-
Get the error when connecting to RMAN
Hello
This is the first time that I connect to RMAN.
Suite error getting while trying to connect to RMAN.
I don't read somewhere that no additional package or the required rman utility.
So I try to connect directly, or do we need to configure RMAN?
*
C:\Users\praveen kumar grosseau > target RMAN.
Recovery Manager: release 11.2.0.1.0 - Production on Thu Sep 22 17:11:52 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00554: initialization of the package manager internal collection failed
RMAN-04005: target database error:
ORA-01031: insufficient privileges
C:\Users\praveen kumar grosseau > *.
My system details, operating system is windows7, oracle 11g database.
Help me friends.
Kind regards
Praveen.Hi Praaven,
Under windows the best way to connect to RMAN uses SYS account (or another SYSDBA), then:
C:\>RMAN target sys
Good bye
Marie France -
Windows Server 2003 R2 Standard Server
Client-side: Windows 8The problem:
I create a new user and let the "user must change password at the next logon' checked. When I try to log in with the newly created user I get an error saying "User must change password at the next logon" after ptoviding the new password.
At this point if I uncheck the "user must change password at the next logon', then the user can connect properly.
Can someone help me. Please let me know any problem OS compatibility between the server and the OS cleint.
Jaril
Hi Jaril,
Thanks for posting your query in Microsoft Community.
According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.
Hope this information is useful.
-
No message connection error when connecting with Wi - Fi connection
Original title: windows xp
How can I get my connection whireless works, it shows there, it says I have an excellent connection, but when I use a browser it does no link found help
Hi Clint,.
1. What is the brand and model of the Modem/Router?
2. are you able to connect to the wired network?
3. were there any changes (hardware or software) to the computer before the show?
Troubleshooting for wireless networking with Windows XP requires gathering information, check the drivers, verifying compatible hardware and configure the wireless settings.
Perform the steps mentioned below and see if it helps.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
Good day!
-
"Error 105: connection with a token to MaxUni" error when you add a server Essbase
I was sent Hyperion Planning and Essbase 11.1.2.3 with Embedded WebLogic HTTP server under Windows 2008 Server R2. Then I applied the patch #17767309 (this is for server EAS - free 500). Then after connecting to the EAS web console as "admin", I added a knot of Essbase server and then trying to develop it, I get nothing underneath and the following message in the box at the bottom: "error 105: connection with a token to MaxUni.
I have stopped all services of the EMP, deleted "tmp" folder "Oracle\Middleware\user_projects\domains\EPMSystem\servers\AdminServer" / I redeployed EAS server and Essbase using the EPM system configurator - it is the sequel to advice found in this thread:
Then I restarted all services of EPM and logged on to the console of Regional service as admin, once again, deleted and added an Essbase server again and I get the same "error 105: connection with a token to MaxUni ' when you try expand the Essbase server node again.
How can I solve this? I'd appreciate a lot of clues!
I saw something similar bez Essbase RTC was not updated to match the version of Essbase and EAS server. Download and apply the 17767299 hotfix that is Essbase RTC 500. This should solve the problem.
THX
Vivek
-
Hello world.
I just updated my storm 9530 with the ver.5.0 and has since got this version I'm not able to sync with my outlook 2003. Always got this message in french "Connector specific error" which means "the connector-specific error. Anyone ever had this problem. If so, how can I solve this problem. Thank you. Michel... Sorry for my English...
Hi and welcome to the Forums!
I think that the translation may be different... see if this KB applies to what you are requiring:
- KB15294 "Connector specific error" when syncing with BlackBerry Desktop Software
See you soon!
-
am getting error error when am with funcation wm_concat.
Hi all
am getting error error when am with funcation wm_concat.
Thanks to all in advanceSQL> DECLARE 2 ex VARCHAR2(200); 3 BEGIN 4 SELECT wm_concat(ename) INTO EX FROM EMP WHERE deptno=30; 5 DBMS_OUTPUT.PUT_LINE(EX); 6 END; 7 8 . SQL> SQL> / DECLARE * ERROR at line 1: ORA-06550: line 4, column 10: PL/SQL: ORA-00904: "WM_CONCAT": invalid identifier ORA-06550: line 4, column 3: PL/SQL: SQL Statement ignored
Published by: Maldini on 9 January 2012 22:02Cool wrote:
HelloPlease check the version of database you are using.
wm_concat is available from 11 g Release 2.
Incorrect answer.
wm_concat is undocumented and should not be used.
Even Tom Kyte tell you... Re: SEPARATE does not not with wmsys.wm_concat
11 GR 2, there is a documented feature called LISTAGG...
http://docs.Oracle.com/CD/E11882_01/server.112/e26088/functions089.htm
-
Error message when connecting with wireless USB modem
Dear Sir/Madam,
I use the HP laptop with Windows vista operating system. I'm also using the USB wireless modem. But now, I had problem connecting with usb modem. I get ((erreur (6): could not get the string) message connecting with.) Kindly help me to solve the problem.
Thank you
Kind regards
D.YokeshHi D.Yokesh,
1. did you of recent changes on the system?
If it is a recent issue, then you can try a system restore to a prior restore point you have been affected by the issue.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System Restore: frequently asked questions
Hope this information is useful.
-
When connecting with DB name Error Getting
Conn scott/tiger@Db1;
I got error like:
ERROR:
ORA-12541: TNS:no listener.
But if I write like
Enter user_name: scott
Enterr password: *.
Connect with success.
Why it happened what is the reason.
Please give the reason
Thank youUsing the first case, you can access the remote database using the connect identifier specified n your tnsname.orafile
Also the user through which you connect should be available in the remote database.
Suppose I want to connect to a remote user scott database while the user must be present in the remote database, so only he can connect
-
I get this message when connecting:
Runtime error!
Program C:/Program F
Message indicates this program caused the term to terminate in an unusual way. Contact the program support team.
In my view, that it is a Microsoft problem?
Bill Pharr
* Deleted for privacy *.
Hi Bill,
I understand your concern and I am ready to help you with your problem. To isolate the problem, please specify what type of program or software you're trying to connect with?
Thank you
JoeM
-
Printer D1370 MF w / usb on win7 x 64 machine connection.
I understand that when networked, I owe to the printer and manually press
, then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW... However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.
So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the
mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb. 1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?
2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.
3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?
4. What is the error Code 162,0,0?
5. where is the complete list of the error codes for MF Toolbox.
6 help!
Hi monza.
I know that this issue is frustrating and I'll be happy to help you.
The new imageCLASS machines are designed so that you can select an option to scan the machine. There is no way to set a default scan on this computer option. You will need to select [Remote scanner] or [computer]. This is to ensure that your device correctly handles the scan project. For this reason, the ability to program a specific mode is not available.
Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.
The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner. Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer. We recommend a direct connect between the printer and the computer. Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:
- Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
- Select [Remote scanner], then press [OK]. The display reads, "remote scanner. Waiting in line... ».
- On the computer, open the MF Toolbox and select [PDF].
- Click the [START] button green on the window [PDF]. The machine begins to deal with the scan.
Then I recommend to download and install the e-manual for the device to your computer. It gives very detailed instructions on each of the functions of the machine. The e-manual should be included in the manual on CD-ROM supplied with the machine. If you are unable to access it from there, please click the link below to download the electronic Handbook:
imageCLASS D1370 - Brochures & manuals
I hope this information is useful for you. However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
-
Outlook express crashes when connecting with the mail server
Outlook express 6 crashes when the connection with the mail server, please advise, thank you!
Try to remove your e-mail account and then close and reopen OE and then add it back again. Make sure that antivirus sofware interfering not - see www.oehelp.com/OETips.aspx#3
Steve
-
error when compiling with jre 5.0 auditor
Hello
I have an application that has been developed with the JDK 6.0. It works fine on the Simulator as well as on the device.
I need to make it compatible 5.0.
I went to the jre 5.0 (installed with the plug-in in eclipse) and corrected all the errors of compilation (a few)
Now I get and error when trying to package the application:
Cannot open the C:\Users\MyUserName\eclipse_workspaces\Blacberry\AppName\bin/com.company.mobile.appname.AppNameL.crb/ dir
Error! : error: auditor failed: C:\Eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.25\components\bin\preverify.exe d C:\Users\...
Any tips?
Thank you
Alex
Thank you guys for all the kinks.
I managed to solve the problem by replacing the preverify.exe of 5.0 to 6.0.
Might want to check this thread as well:
http://supportforums.BlackBerry.com/T5/Java-development/problem-with-resource/TD-p/332908
Maybe you are looking for
-
or-switch installs nise.dll
I'll have hard install nise.dll and their files associated (they install at all) but all other funstions of nor-switch seems to work very well, all except the dll. Any suggestions Thanks in advance
-
Original title: DPIdefsault level I am trying to install a pc health check-up for my laptop but it says my monitor does not have the minimum required display settings and change the default DPI level. How do I do that?
-
EliteBook 8540p: erase secure against disk Sanitizer?
I see in my BIOS I have a secure erase option and an option for the disk Sanitizer. What is the difference? (Yes, I'm aware that one or both of these options completely erase the drive... it is my desired outcome)
-
Update the vmWare tools in VoP via vCenter
I'm still new to this community and I hope I'll catch up here soon, but I'm not sure of the update process the vmtools on the device of VoP. I know once I spunt'sand he upwards and configured the IP etc, the vCenter as the tools were obsolete. Tonigh
-
Is there any way to access the disabled user account record? : - 1.5 CWMS MR1
Hello We, users who represent we want to turn off, but in that user profile recordings are available. As currently CWMS have no download option so we / he cannot store locally We want to know is there any way we can access his record after disabling