Error Windows Update "0 on 3 updates" and 0%
Original title: Windows Vista 30 39 updates and Widnows repeat Reboot
I just got an automatic update started yesterday morning for Windows Vista which has been downloaded 39 updates. He got hung up at 30 and I let it run all day. Next was the computer so it go hard closed. When turned back on, he showed a screen saying 0 out of 3 updates and 0%. The computer keeps going into startup mode until it gets to the screen, and then it crashes, cycles and restarts more and more (more than 12 hours now). The computer had no problem in operation before this update. We cannot use the computer to do patch auto Web sites, either as a reuslt of the issue of restarting. Anyone can help us fix? Concerned we risk losing the photos stored on the pc. Thank you!
Hello
See the following article:
Important: Be sure to back up data before installing.
Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates:
http://support.Microsoft.com/kb/949358
Note: Follow the article mentioned above, regardless of the error message.
Tags: Windows
Similar Questions
-
Error Code 0 x 080070570 Windows updates and 0x800A01AE impossible?
Error Code 0 x 080070570 Windows updates and 0x800A01AE impossible? Regds, 'a journey of a thousand miles begins with a first step."
Code 0x800A01AE error and 0 x 080070570
Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
Click Start, run, type cmd, and then click OK.
At the command prompt, type the following commands and press ENTER after each command:net stop wuauserv
net stop bits
output
Rename the Catroot2 folder.Note do not follow this step if you are using Microsoft Windows 2000.
To rename the Catroot2 folder, follow these steps:
Click Start, run, type cmd, and then click OK.
At the command prompt, type the following commands and press ENTER after each command:net stop cryptsvc
Ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
output
Important do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
Rename the folder "C:\Windows\SoftwareDistribution":
Click Start, click Run, type %any, and then click OK.
Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
Type SoftwareDistribution.old, and then press ENTER to rename this folder.Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
Click Start, run, type cmd, and then click OK.
At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
regsvr32 c:\windows\system32\wuapi.dll
regsvr32 wuaueng1.dll
regsvr32 c:\windows\system32\wuaueng.dll
regsvr32 c:\windows\system32\dllcache\wucltui.dll
regsvr32 wups2.dll
regsvr32 c:\windows\system32\wups.dll
regsvr32 wuweb.dllStart the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
Click Start, run, type cmd, and then click OK.
At the command prompt, type the following commands and press ENTER after each command:
net start bits
net start wuauserv
net start Eventlog
outputLuck!
Kind regards
Sohail PatelRegds, 'a journey of a thousand miles begins with a first step."
-
Whenever I run windows update, and try to install an update for Vista, I get the error message"
"Windows Modules Installer has stopped working and was closed"
. This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.
Thank you
Luke
Hi guys
I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.
Thank you
Luke
-
I can't register for Windows update and receive the error code 0 x 80070002 when I try.
When I try to solve the problem by following the instructions, I'm unable to start or stop the automatic updates in the field of Services. When I click with the right button on automatic updates and then click Start, I get the following error message: error 2: the system cannot find the specified file.
When I go to Windows Update and the attempt to revise my story to update, I get error 0 x 80070002 there as well. Anyone have any ideas? The other proposed problem was to remove the contents of the Datastore folder after you type %windir%\SoftwareDistribution in the run dialogue box, but I do not have a Datastore, just the two following folders folder: installation and WuRedir.
Hello
Rename the folder c:\Windows\SoftwareDistribution softwaredistribution.old
Restart the computer and then try to update.
Check the two links below
http://support.Microsoft.com/kb/910336
http://support.Microsoft.com/kb/922582
If it does not work, try a SFC scan and then try to update, follow the article below to run a sfc scan
http://support.Microsoft.com/kb/936212
Peace be upon U
-
I try to run windows update and it will not update gives error code 80070005
I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?
Hello
1. which Microsoft Fixit did you?2 have you installed new hardware or software before the show?
3. who is the antivirus installed on the computer program?
4 update you are trying to install?
5. are you logged on as administrator on the computer?
If this isn't the case, I suggest you to log on as an administrator and check for the issue.Method 1:One of the other reason for the 80070005 error is caused by software running on your computer security.Temporarily disable the security software on the computer and see if that makes a difference.Disable the anti-virus softwarehttp://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:I suggest you perform the steps described in the article:Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
http://support.Microsoft.com/kb/968003This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
Method 3:Perform a clean boot, and then check if it helps.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
See also:Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesI hope this helps. -
I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019... Can someone help me please
How to troubleshoot problems connecting to Windows Update or Microsoft Update https://support.microsoft.com/en-us/kb/818018
-
Windows Update and now when I try to open Lightroom it gives me a message that says "Lightroom has encountered an error when reading it is an overview of the cache and will try again during the reboot" reboot is not good at all.
The problem you are experiencing is not related to an update of Windows. The preview cache is corrupt. You must use Windows Explorer or the Finder to open the folder that contains your catalog. Find the folder that has the extension .lrdata and delete the entire folder. Then, launch Lightroom as you normally would. Lightroom will be in the construction of a new Preview file and you should be able to continue normally.
I don't know the reason, but a lot of people have experienced this same problem. Take a look at the more "like this" list to the right of this message. It is more common than you might expect.
-
When I try to update windows I get this error «Windows Update error 80072efe»
Hello
I installed 2 days ago to my new PC windows 7. After the installation is complete, I tried to update windows for the first time and every time I get this error: «Windows Update error 80072efe» I google the error and I saw that a lot of people have the same problem. Most of them had their infected PC but mine is brand new and I don't know what to do.
HelloI found some articles that should help you solve thi sissue.Try the methods listed in the articles below and check.
1 Windows Update error 80072efe or 80072f76
http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76
2. you may experience temporary errors related to connection when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:
"Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »
So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."
After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »
However, no matter how long it works, it never gets past "Setup initialization."... »
So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.
So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.
So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.
Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.
In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?
Try the sfc scan:
http://support.Microsoft.com/kb/936212If not, repair of Vista:
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html -
Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.
I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »
After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).
The restoration went well, restarted, but the problem persists.
Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.
The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.
The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.
It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.
On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.
The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.
Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.
However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.
***************************************************
Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?
Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.
This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.
So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.
Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.
* shrug *.
Computers.
-
Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.
Original title: code 10
Hello
Read this link which has also a few solutions:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/--------------------------------------------------------------------------------------
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I am trying to install Windows Update and get 800F080D for IE9. Why?
I am trying to install Windows Update and get 800F080D for IE9. Why?
Hi KevinMiller
1. don't you get the error only during the installation of internet explorer 9?
2. when exactly you get the error message?
3. that you get an error when installing other windows updates?I suggest you to check if you have all the prerequisites installed for internet explorer 9.
http://support.Microsoft.com/kb/2399238
Refer also to the links below and check if you did all requirements before installing internet explorer 9.
http://support.Microsoft.com/kb/2409098http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
I hope this helps.
-
Cannot install Windows updates and updates Antivirus on Windows Vista
Original title: laptop computer started to freeze on virus scan always on the same folder.carried on the full recovery of the system partition on laptop, then only left with factory shipped programs. Unable to download windows updates or antivirus updates.
OS Vista Home premium version 6. No display service pack not installed? THAT IS TO SAY 7. After the system recovery, I had 2 anti-virus bootable and performed analytical full but neither anything picked up.
Hello
· What happens when you try to update windows? You get the error message?
· What are the updates you are trying to install (KB number)?
· What security software you use?
I suggest to disable the security software and then try to install windows on the system updates and checks to see if you are able to install or not.
Note: Activate security software once you've done the test.
Check in the window update and we do know are the updates that you try to install on the system. See the article mentioned below.
Updates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
Step 1:
It may be that some third party software is running in the background which is interrupted, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you have finished installing, follow step 7 to start the computer in normal startup.
Step 2:
Reset windows update components and check. Follow the steps mentioned in the article below.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-us
Step 3:
I suggest you to run some Surinamese check check the article mentioned below.
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
http://support.Microsoft.com/kb/947821/en-us
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error Windows Update Database that can be 0 x 80070490
Original title:
Update of Windows, Java and some problems
Hello
My Java and Windows 8 will not get automatically updated. When I go to all the work this symbol [[[comes in. I have updated Java, nevertheless a message shows to update when I put a cursor over any word of an open page of the internet. I have troubleshooted illustrated message"
Error Windows Update Database that can be 0 x 80070490
Miniport Wan (Network Monitor) # 2 has a driver problem
Windows Update configured to never install drivers '
Some keys on the keyboard do not work. How can I fix these problems?
Hello Arif,
Thanks for posting your query on Microsoft Community forum.
If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that is needed to install updates is corrupt.
Try it out below mentioned methods and see if it helps.
Method 1
Try to follow the steps mentioned in the article below.
Windows Update, error 0 x 80070490
Method 2
Try to run the Troubleshooting Windows Update tool.
This utility is used to and check if the network card and Windows Update services are running properly.
Problems with installing updates
Try other steps mentioned in this article if the issue that you are facing is mentioned in one of the mentioned option it.
Method 3
If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Thank you.
-
Hi, sorry for my English, my number of computers it s, they say full, I have to wait until December 12, everything you know about windows update and windows 10, it's a mess, I, lost my equipment be, I wonder if anyone can help me how to recover my subscription tanks
also my purchases does not appear in the cloud, I have ' VM a very old usser
-
Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.
Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.
You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3. You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.
Maybe you are looking for
-
How to locate the dropdown Menu for adding password for Web site
When I add my password on a new site information after that site accepts the same, fine. However, to a frequent times I tried to change the password manually, or, maybe there was some delay or ULF and the finished password not be saved for easy acces
-
Re: Looking for the (old) RAM Portege 3490
I'll try to find to improve my Portege 3490 of 128 to 256 MB of RAM (max possible if I understood).I looked at a few sites on the internet but can't find RAM for this model.Anyone know of a store / site to buy from?I am located in France-Paris.Thank
-
I have a copy of 'pay-for' free and Roboform, (v. 6.10.2) which works just fine on Firefox v. 3.6.17. But it does not work on Firefox version 4. I won't buy another version of Roboform to use on FFv4. That's happened? Why it doesn't work anymore?I ca
-
HP 15-ac107nq: 15-ac107nq GRAPHICS DRIVER NOT WORKING Hp laptop
I have a computer laptop 15-ac107nq Hp that has graphics of amd radeon r5 m300. The problem is that the driver provided by HP does not work. I downloaded sp72646.exe file here: http://support.hp.com/ro-en/drivers/selfservice/HP-15-ac100-Notebook-PC-s
-
when im playing left 4 dead 2 versus and kids turns to the top turn of the page to play counterstrike he says: interruption of the connection to the server and then resets my modem or router I had the Charter to come out, they ran the new line and I