Error with external / network API

Similar Questions

• Problem with external network profile and DHCP

  Hello

  Is it possible to create a network without IP range profile, in order to use the external DHCP protocol.

  If I create a network without ip range profile I got this error when I submit an application VM:

  [catalog] Com.vmware.vcac.platform.rest.client.error.ResponseErrorHandler.handleError:55 - [error rest] ERROR: {status code: 400}, {error code: 42300}, {error Source: null}, {Msg of error: a server error occurred.} Error the applicant unit. {The list of unallocated IP addresses for the network profile (mynetworkprofile) has been exhausted.}, {System Msg: error of Infrastructure service provider}

  I'm sure we can do it, but I don't know how

  Max

  Simply create the profile of any network. Just assign the reservation with the network that you want to use, and the virtual machine will get his IP from the DHCP server.

  vCAC will not be able to manage these addresses because DHCP manages them--if that's what you want to accomplish...

• E3000 displays "USB is not supported" error with external hard drive

  I have the E3000 router and recently bought a USB WD (Western Digital) 2 TB external hard drive.  I plug the HDD on the router, open the home page of the router (http://192.168.1.1/) then click on storage > disk and I get an error of "the USB is connected is not supported"-suggestions on how to solve this problem?

  Thanks for any help!

  I had the same problem with my WD hard drive today after setting up my E3000. Remove the protection 'security' or the password on the disk as well as level of what the duration of sleep obtained took care of this problem. My WD is now working with my E3000 seemlesly.

• NDK errors with external file

  I get no error in my code, but for some reason, I get errors in the file: 'unistd.h' located in '\target\qnx6\usr\include\ [ndkdir] '. I have 13 of them. Errors are: '' ssize_t' in the namespace "std" does not name a type', "std::dev_t has not been declared", "std::mode_t has not been declared" and "std::ssize_t has not been declared. Others are repeats (the first is the one that appears the most). They are clearly related. This is one of the lines that produced the first error: ' extern _CSTD ssize_t pread64 (int __filedes, void * __buff, size_t __nbytes, off64_t __offset _CSTD); I don't know why he did it, because I have not modified the file.

  Thank you and sorry for the bad title.

  An executable application must have a main function.  The linker does not produce your binary, unless a file object any provides a water main.  It would not be bound to the addition of the math library; It's just adding allowed mathematical library binding process to reach the point of trying to generate the final linked binary file.

  BTW, rather than add "-lm" for additional Options to the linker, you instead add "m" option of libraries.  This indicates explicitly the IDE your application requires libm, which may allow the other features related tools.  With a little '-lm ', the IDE know the meaning of the parameter.  (I assume that you have a construction project managed, not a makefile project)

  See you soon,.

  Christian

• Windows Xp mode, error with VPN network VPN-Poly.

  IN windows Xp mode, I need to connect to the University through a VPN-VPN-Poly network. I did the config as told by the University, but the connection not is not made. says error connection to the VPN-Poly. Error 619. I tried several times to remove the connection and make again, but does not work. Please help I need this connection. The connection works in my Windows 7, but not in Windows Xp mode.

  Hi ZDullull,
   

  As the question is related to XP Mode, you will get better support in the Technet Forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Forums of virtualization in Windows 7 .

• Problem with Ogranisation Network internal/external in vCloud

  Hi all

  I'm trying to boot WindowXP VM inside HCLOrgvDC (Org vDC). But the start-up has failed with an error as below.

  -Cannot start VAPP "vApp_administrator_7."
  -Unable to start virtual machines in the pool of resources '2114618123-HCLOrgvDC '.
  -Unable to start Windows XP VM: could not locate a compatible host connected to any network.

  I just want to start it without external network connectivity. I created a pool of network with a direct connection (screenshot attached), but still VM is not booting.

  What could be the problem, please help

  Thank you

  TEJ

  Hello

  The error message could check you that all your hosts are correctly enabled in vCD?

  vCloud Admin-> management & monitoring-> vSphere resources-> hosts

  If this is not the case, make sure to enable each host, this allows you to use the ability to "spanning the host" for your network pools. (your underlying vSphere Cluster)

  Kind regards

• Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

  I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

  This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

  Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

• Error code 797: connection is not available because there is a problem with your network card or modem

  I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

  Hi Muffakham,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check out the link for more information.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

• If you use network storage, configure ASM disks with external redundancy groups

  Hi Experts,

  If you use network storage, configure ASM disks with external redundancy groups. Don't use groups of Oracle ASM failure. Oracle failure groups consume cycles additional CPU and can run in unpredictable ways after suffering from a disk failure. When you use external redundancy, disk failure are transparent to the database and do consume no additional database CPU cycle, because it is discharged on storage processors.

  This does not mean

  • RAID 1 + 0 for diskgroup + REDO1
  • RAID 1 + 0 for diskgroup + REDO2
  • RAID 5 for diskgroup + DATA
  • RAID 5 for diskgroup + FRA

  Is this one suggested, the recommended best practices for oracle on VMWARE?

  
  

  Thank you and best regards,

  IVW

  
  

  Hello

  You can check the storage analysis as well...

  http://www.Dell.com/downloads/global/solutions/tradeoffs_RAID5_RAID10.PDF

  discussion of the Oracle

  https://asktom.Oracle.com/pls/asktom/f?p=100:11:P11_QUESTION_ID:359617936136

• Assignment of IP with vCAC external network profile

  I joined vCAC and NSX, and note that the Service Edge router that gets deployed on a blueprint multi-machine receives 2 IP addresses on its unique "uplink" profile external network interface.  Here is my setup and what is happening.  Any help to understand why this would be useful.  Not a huge deal because it is a learning laboratory, but when I go to implement it in a production environment, I need to know if this is expected behavior, or if something is wrong because it effectively reduces the number of possible networks to deploy-able by half.  Again, not a big problem as this "transport network" (the section between the Edge Gateway manually deployed and dynamic Service Edge routers) will exist entirely in the vSphere environment and can be as big as a class A network, if necessary, it is however a huge waste of space IP I want to solve it if possible.

  Topology:

  I have a NSX Edge and the virtual wire (switch NSX L2) already deployed in the environment.  Within vCAC I have:

  -a reserve related to the dvPortGroup created by the NSX L2 switch

  -an external network profile that is used to configure the port to uplink of dynamically deployed NSX routers edge of Service to connect to the LAN segment between the dynamic ESR and the switch of NSX Edge/L2, already deployed

  -a profile of NAT network 1 number which is used to configure the virtual machines deployed from vCAC plans

  -a vSphere vCAC VM blueprint pointing to a snapshot of a virtual computer within the environment vSphere (linked clone deployment)

  -a plan of multi-machine vCAC which contains the above plan and assigns a network interface to the virtual machine and using the profile of network NAT 1 to configure the IP settings on the virtual machine.  MM master plan contains only a single VM in order to test the dynamic creation of network and IP assignment features/integration between vCAC and NSX.

  Topology resulting, once the virtual computer is deployed:

  Edge (deployed manually) NSX gateway

  v

  v

  NSX L2 Switch/Virtual Wire (deployed manually

  v

  v

  NSX edge router Service (deployed as part of the deployment of the vCAC action plan)

  v

  v

  VM (deployed as part of the deployment of the vCAC action plan)

  In theory what needs to happen is that when I ask a resource of the Architecture SDSE MM:

  1. the ESR is deployed with 2 interfaces: 1 for the external network configured with an IP address available on the corresponding subnet and 1 for internal NAT network configured with the IP address of the default gateway is configured in the profile of NAT network.

  2 NAT rules and treatment of traffic are automatically configured in the ESR

  3. the virtual computer is deployed and configured with a NETWORK adapter with the configurations appropriate IP such as specified in the profile of NAT network.

  
  What is actually happening:
  1. the ESR gets deployed with 2 network cards; 1 NETWORK card for uplink to the external network, which gets 2 IP addresses on the subnet (instead of 1) 13 and 1 NIC for the default gateway of the NAT had network configured with the IP address of the NAT network default gateway.  Steps 2 and 3 still occur.

  Hi Jeremy,.

  It is the expected behavior. If you deploy an edge manually, you will be asked for a 'IP management', and then an IP address for the use of the uplink. It is the second IP source address. If you were to use a NAT, you get an additional IP address for each VM on the NAT's segment.

  See you soon,.

  Grant

• Error with the listener. ORA-00132: error of syntax or network name not resolved

  Hi all
  
  I get a strange error while trying to start the db.
  
  SQL > startup nomount
  ORA-01078: failure in the treatment of system settings
  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
  ORA-00132: error syntax or network name not resolved "LISTENER_TSS2A076N3."
  
  Listener is running.
  
  Here is my file Listener.
  
  listener.ora.tss2a119n1 # Network Configuration file: / oradb/oracle/product/asm /.
  11.1.0/network/admin/listener.ora.tss2a119n1
  # Generated by Oracle configuration tools.
  
  LISTENER_TSS2A076N3 =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xx.xx.xxxx.net)(PORT =)
  (4329)(IP = FIRST))
  (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xxx.xx.xxxx.net)(PORT =)
  (4329)(IP = FIRST))
  )
  )
  
  SID_LIST_LISTENER_TSS2A076N3 =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = pnet01r_dgmgrl)
  (SID_NAME = pnet01r3)
  (ORACLE_HOME = oradb/oracle/product/db_1/11.1.0)
  )
  (SID_DESC =
  (SID_NAME = + ASM3)
  (ORACLE_HOME = oradb/oracle/product/asm/11.1.0)
  )
  )
  
  
  Well, I'm trying to install data guard and this error I get on the standby server. The listener preceding is also the same.
  
  Help, please.
  concerning

  I'm not very clear on that... Kindly explain... what exactly needs to add, delete or modify.

  Follow the link, it shows why and how LOCAL_LISTENER needs a specifications in the tnsnames.ora. You don't have a problem with the native listener.

  Werner

• Can I set the external network with no gateway

  Hi is possible to create 'External network' without bridge in VCD 1.5?

  No, but you can simply give a false gateway (as some random number)

• Failed to create the external network

  Hi all.

  Well, I have deployed VIO with NSX. I created 2 virtual machines (instances) with 2 internal networks. I created router, plugged on both networks. Tried to ping of vm1 (int_net1) to the virtual machine 2 (int_net2) through router - everything works fine.

  So, the next step was to provide access to Internet of the virtual machines. I try to create the shape of external network Admin-> Control Panel-> network-> network create system:

  Name: extnet1

  Project: MyProject

  Type of network provider: dish (deployment master I chose NSX environment and VLANs separated to outside networks)

  Admin State: checked

  External network: checked

  When I press the button "Create network" an error has occurred: ""Error: failed to create the extnet1 network '. " How can I create external network?

  Thank you all for help. I solved my problem. For the future: you can only use "PortGroup" in Type of network provider. So when I chose PortGroup and set it to the external network 'dvportgroup-XX' have been created.

  controller01 2015-08-12 07:51:34.847 INFO [req-e17f7e0a-fd22-4f06-ba05-76c760b7d6f8 neutron.api.v2.resource None 11320] create failed (client error): Invalid input for operation: GRPE caught ports support only on external networks.

• Problem of external network (Client)

  Hi guys,.

  After the transfer of my "production" environment, I am facing a problem with the external network (not API).

  On my lab environment it works fine, but on the production environment something strange happens: the machine can be put into service, but sometimes he gets 'customization' Openstack, sometimes not.

  Also, when it "works", I can reach a floating IP to one machine, and it works for something like 5 seconds, then this IP stops responding.

  I noticed that my switch TRANSPORT DVS Checkup complains to the VLAN ID 0 (which is not effective in these physical network cards), I use the VLAN ID 102 as the Vlan of Transport VXLAN. Is there something else I'm missing?

  My setup is composed with:

  -1 bunch of Mgmt

  -1 bunch of nova

  -1 bunch of edge.

  They are all on the same Transport area of the NSX, and connectivity to the Openstack API and the Mgmt API now works well I put almost present on 'production' (in fact it is an internal test with some users), but this external network problem is a show-stopper for me

  Thanks for the advice, sorry to bother you with so many questions

  Ah, an offtopic question: when you release the 2.0 version? Is it going to be compatible with the 1.0 version, or I have to remove and reinstall my whole environment? (VMworld, probably?;) (P)

  Thanks again!

  Reading your post, I understand that you have 2 numbers:

  Problem with the metadata service (give the host name):

  Communication to the metadata service works like this:

  

  Can you do some tests for me.

  1 test VXLAN connectivity between the ESXi-Compute (hosting your VM of Instance OpenStack) and the edge of ESXi (hosting your logical shared edge router)

  Ping ++ netstack = vxlan x.x.x.x (to test the connectivity of your IP)

  Ping ++ netstack = vxlan d s 1570 x.x.x.x (to test the MTU on the physical fabric is 1600 or greater)

  Note: x.x.x.x is the remote IP of VXLAN ESXi @.

  If this test does not work, then your VM can speak to its default gateway correctly.

  If this test does NOT work, then it is probably a problem with the physical fabric (VLAN misconfigured or MTU misconfigured).

  2 validate connectivity VLAN between the edge of ESXi (hosting your edge of metadata) and ESXi-Mgt (hosting your LoadBalancer VIO)

  . SSH to the VIO - WHO

  . then make a SSH for balancing load-VIO ssh loadbalancer01

  . can do a ping to Metadata Edge1 ping x.x.x.x (ping should fail, BUT you should see an ARP entry for that IP @: arp - na)

  Note: You can find the Edge Mgt IP metadata @ under edition of the edge metadata_proxy_router_xxx NSX and its uplink interface checking.

  If this test does not work, your edge of metadata can talk to VIO load balancing.

  If this test does NOT work, then it's probably a problem with the Mgt ESXi and ESXi points not to the same port of Mgt group.

  Problem with the external network:

  You validate people can talk to the VM floating IP @?

  If this isn't the case, it is probably because the edge of ESXi (hosting your logical shared edge router) is not on the right VLAN.

  Dimitri

• Supply Machines on the external network of non-domaine Thinapps joined: invalid HTTP 404 status Code

  So, I want to put at the disposal of the thinapps of non-domaine joined Machines on the external network through the workspace. Is this possible?

  When I access the URL in such a condition, in the HorizonThinAppClient.log, I get the following:

  2015-02-23 08:48:43 [INFO] [9860.9344] [hzntaclnt::InstallDb:DownloadFileToCache] download https://workspace.domain.com/SaaS/API/1.0/rest/user/applications/download/edf74562-6c32-4BE9-8C3A-74f792de4d1e/Tm90ZXBhZCsrLmV4ZQ== at C:\Users\Joe\AppData\Local\VMware\Horizon ThinApp\PackageCache\Notepad++\HTA715B.tmp

  2015-02-23 08:48:43 [ERROR] [9860.9344] [hzntaclnt::HttpConnection:DownloadToFile] the code invalid HTTP status 404 (not found)

  2015-02-23 08:48:43 [ERROR] [9860.9344] [hzntaclnt::InstallDb:DownloadFileToCache] download failed, error SC_HTTP_RESPONSE_CODE (unexpected HTTP response code: not found)

  2015-02-23 08:48:43 [ERROR] [9860.9344] [hzntaclnt::InstallDb:DoInstallFile] download failed for "Notepad ++" (\\fileshare.domain.local\ThinappsHorizon\Notepad++\Notepad++.exe), SC_HTTP_RESPONSE_CODE (unexpected HTTP response code: not found)

  2015-02-23 08:48:43 [ERROR] [9860.9344] [hzntaclnt::InstallDb:Install] failed to install the package from the file ' Notepad ++ ' (\\fileshare.domain.local\ThinappsHorizon\Notepad++\Notepad++.exe): SC_HTTP_RESPONSE_CODE (unexpected HTTP response code: not found)

  What I have to be on the local network to download the Thinapp packages, or am I misconfigured? I already checked the user who runs has full rights to share inside and on the local network, it works fine, but when mandated by workspace it fails, probably because the client calls a share location, that it cannot reach. Anyone who encountered this?

  You use the option "Enable account based on access '? Please see VMware Workspace Portal 2.1 Document Center for documentation on how make thinapps available to computers not joined to a domain.