Errors to prepare images for offset printing in Photoshop CC 2015

Similar Questions

• Errors in preparing images for offset printing

  On the picture there are information (color) the object of shooting

  

  

  Please describe the problem more in detail. Be specific.

  The file you posted is sRGB with red color within its range of equivalent CMYK ink, as shown above.

  Is the problem that the original file, maybe a psd file has colors outside the range of ink and you want to know your options?

• I always Cached preview needs 2 error or multiple images for playback

  I always Cached preview needs 2 error or multiple images for reading, when I press the SPACEBAR reading button ONCE! How can I do a Ram preview?

  Open the project in 2014 CC file and see if it behaves correctly.

  There are a few problems - especially with audio - in 2015 of CC. See the following page: problems in after effects CC 2015 (13.5). After the effects of interest area

• error code when sent for test printing after you install the new printer on windows 8

  Installed a panasonic KX-P1121E printer on windows 8. I got an error code when sending for printing of the test. And not able to print. Help, please.

  Hello

  Please provide more information for me to better understand the issue.

  1. how the printer is connected to the computer? Is it wireless or wired?

  2 do you have updated printer drivers?

  3. What is the full error message you get when you try to print?

  These steps will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Method 1: check if the printer is correctly installed.

  You can check the link for more information about how to install a printer.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Method 2: you can check the link for the troubleshooting steps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link to download the drivers.

  http://Panasonic.NET/PCC/products/printer/windows_compliance/windows_8.html

  If please get back to us and let us know if this helps to resolve the issue.

• HP 2300 error "cartridge not intended for this printer.

  Hello

  I recently completed a 94 black ink cartridge and when I installed it, a message appeared: "black cartridge inserted now is not intended for use in this printer."  First and only time I had a reflilled of the cartridge.  How to operate?

  Sounds like a user related error message. Unfortunately, some machines can detect if the cartridge has been tampered with or reused. For various reasons, reload a cartridge is not recommended because it may harm your machine. This error message indicates that the power connection is damaged, and probably the error will remain until a new cartridge is bought to replace the old.

  I assure you that although the reloaded cartridges work much of the time, they have a failure rate much higer and the factors that can affect the mechanics of the machine at all times.

  I would like to know if this is the information that you need!

  -Spencer

  PS have a great weeekend!

• Black and white tritone for offset printing

  Hello

  IM everything to print B & W book and you want to do with three different inks (black, a gray dark worm and a light gray), I prepared the files in photoshop Mode/Duotone and the three colors... ID has done some testing with the offset press, I got very good results, but I noticed that the black and dark gray work in light tones, generating a grain. I want to only light gray, working in light tones. How can I control this?  I should work the Duotone curves?

  Thank you!

  Yes, the curves will help.  You can also determine how the overprinting colors.  The curves in black and dark gray could look like a curve in "Bell", while light grey would appear as a bell curve reversed (if necessary).  You will see the results that you adjust the curves.  Good luck, sounds like a great project.

• Preparing images for the web

  Not sure if this is necessarily the best forum to ask, but wonder if anyone could advice.
  
  Basically, I worked on a site for a guy that imports carpets from China. I suspect that the problem is that the images it is supplies me with no shot the best angle - it took with the carpet hung on a wall, so that they are straight.
  
  I used GD to redesign the original images in inches, which works fairly well, but it's pretty clear that the thumb images are not as good as I've seen on other sites.
  
  For example, this is an example of the location and the images that I've been working on / with:
  
  example of
  
  And this is an example of which are clearer, more directly on the images:
  
  example 2
  
  Advice on what I can do to prepare the images a little better would be greatly appreciated.
  
  See you soon,.
  Iain

  Bravo for the answers.

  I probably should have said more about GD, like it's a PHP thing really.

  It turns out that I was using imageresized() in function, when there is another function imageresampled() which is a little more to keep the quality - and that seems to have smoothed a bit on another project, I work here - so hopefully that will improve the cover pictures a little too.

• Error when downloading images for blackBerry Smartphones

  My bberry 8520 was working fine until I updated to Facebook but now I can't download the pictures on Facebook! Can someone help me deleted personal information to comply with theCommunity guidelinesand theterms and Conditions of use.

  Hello agogoman,

  Welcome to the forums.

  What happens when you try to upload a picture? You get an error message? Have you tried to uninstall and reinstall Facebook® for BlackBerry® smartphones application?

• The size of the default Image for the Animations in Photoshop

  Yesterday, I asked what would be the default good size for static images, and someone suggested that 1920 X 1080 pixels is the standard "a normal high-def video."

  So I did a bunch of images with this dimension and imported into a new project. When I have them of drugs on the chronology and the preview in the upper right quadrant (I can't remember the term for this part of the workspace - 'Read'?)-I discovered that my images are a bit too big, or the preview window is a bit too small.

  I can easily go back and simply redimensionneront these images in Photoshop, which makes them a bit smaller. But I want to understand what is happening, for later use. It is a common practice to make your images 1920 X 1080 pixels, but leave on 50 to 100 pixels of padding around them? Or is there a different default size should I use? Or is it possible to tell if my monitor to preview/reading is cropping the view?

  I must point out that I am working on my first video and it didn't include not just any what real video footage at all. I imported simply an audio file, and I'm not adding a series of fixed/static images, like a slide show. When it's over, I would try and replace the opening with a short video sequence, but that's another project.

  Thank you.

  I think I solved the problem. I discovered that my default setting was much smaller than the recommended default value (1920 X 1080), so I changed it to 1920 X 1080. The images I create in Photoshop are the same size, resolution 72. I discovered that if an image touches the border of the screen to work, it will be heavily truncated. So I created guides that indicate an area of 100 pixels of padding broad around my image. I also discovered a feature that does the same thing first ('Lines of magic', I think).

  I didn't realize a finished video yet, but things looked OK when I preview the. Thank you.

• How to set the dpi for photo printing in photoshop elements 4

  How can I configure PPP to print photos using photoshop elements 4... Thank you.  I don't want a resolution, but the asnd dpi if I can not then which version would be able to do...

  For further reading:

  http://www.Scantips.com/basics02.html

  http://www.Scantips.com/basics2c.html

  http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-7945a.h tml

  You must also set the quality of the print with the printer driver to set the ouput dpi

• Just upgraded window 7 for windows 10 and photoshop CC 2015 accident immediately after the start

  someone knows how to fix this?

  Hi Gabriele,

  Thanks for posting on the Adobe forums.

  Please follow these steps:

  1. press SHIFT while launching Photoshop. It allows to disable 3rd party plugins.

  2. press CTRL + SHIFT + ALT when you launch photoshop. It resets the preferences.

  3. Please submit the Eventviewer error message. This link will help you: http://www.cyberlink.com/support/faq-content.do?id=10449

  Kind regards

  Sandeep

• the printer does nor print with photoshop cc 2015!

  does it mean that when I try to print and choose my options, the printer back to the default and do not print

  Hi ahmedlotfi2010,

  Are you able to print from other applications outside of Photoshop?

  Also please make sure that the printer drivers are up to date and it is there any other available printer with you from which you could try to print and see if it prints.

  Kind regards

  Tanuj

• The Illuminant C for a printed document conversion: D65 or D50?

  I have a few old color data of the 1930s which is expressed in coordinates using Illuminant C. I need to reproduce it in the swatches in a document for offset printing, I'll prepare you using InDesign. I can convert the coordinates in the LABORATORY using software. However, this requires that I replace C Illuminant D50 or D65. D65 is the match more closely to obsolete Illuminant C. But this project is intended for production printing, where it will be considered in a light booth D50. I have also been informed that the Adobe color engine also assume D50 for everything.

  Are there management settings of colors that I can use to preserve the appearance of the conversion of C to D65 somehow? Or should I accept the inevitable and convert directly from C D50?

  Important is the concept, either A or b:

  (A) a set of tokens is observed under illuminant C and the colors are represented by XYZ or xyY.

  A set XYZ sets a color absolututely, there is no need of a white point.

  In this case, the calculation is simple for reason x, y, y:

  z = 1-x-y

  X = xY/y

  Z = zY/y

  X 1 = X/Xn etc.

  next page 4 here:

  http://docs-Hoffmann.de/cielab03022003.PDF

  Xn, Yn, Zn is the D50 white point. In CIELab, it is just a reference, of course

  referring to expected conditions of the printed product vision.

  (B) a set of tokens is observed under illuminant C and the colors are represented by XYZ.

  How would the same chips look if they were read under D50? What are the new XYZ values?

  It is a question of color appearance. At the present time, I think that this is not your actual task,

  Therefore, it is not said.

  The CIELab values for Munsell colors are for example here, if that is important:

  http://docs-Hoffmann.de/munsell15052009.PDF

  http://docs-Hoffmann.de/munsell15052009-AbsCol-NoBPC.PDF

  Cordially - Gernot Hoffmann

• Error message when I try to print the pdf: "insufficient for the image.

  Part of my job is to create pdf documents, insert maps in pdf format, locking documents to prevent tampering, but that allows you to print and send them to customers.  Recently, I've updated for Adobe Acrobat Standard 11. Since then, I had trouble printing pdf documents, I create; I get an error message "insufficient data for the image. Cards in the document are not displayed, and it cannot be printed. If I re - create the document and do not put the permissions password to this topic, the document is fine. But I have to be able to lock my pdf documents to prevent tampering. Help, please!

  Thank you! I installed the 11.0.11 patch and it works!

• BEX error for 3d printer

  I have BEX error, but for a 3d printer. The error only occurs when I'm scanning an object. The program is XYZscan.

  Signature of the problem:
  Problem event name: BEX
  Application name: 3D_Triangulation.exe
  Application version: 0.0.0.0
  Application timestamp: 56568088
  Fault Module name: MSVCR100.dll
  Fault Module Version: 10.0.30319.1
  Timestamp of Module error: 4ba1dbbe
  Exception offset: 0008ae6e
  Exception code: c0000417
  Exception data: 00000000
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Information additional 1: 150 b
  More information 2: 150bebd24bb1483bcbcd5656b6e124ae
  Additional information 3: 384
  Additional information 4: 384f4e497b19c395b86ab0f877724fe2

  I tried the way DEP but it dose not work. He says "this program must run with Data execution prevention (DEP) enabled. You can't turn off DEP for this program. »

  Help, please.

  Hello

  Cause must be printer drivers so check with the help of the manufacturer of the printer
  and the forums (if any).

  OEM for the printer manufacturer is responsible for the proper functioning of the printer
  and their drivers. Check with the printer manufacturer's support, their online
  documentation and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  ================================================

  Windows 10 - Fix printer problems<- printer="">
  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Supported Windows 10
  http://Windows.Microsoft.com/en-us/Windows-10/support

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">