HP 2300 error "cartridge not intended for this printer.

Similar Questions

• Printer error ' ' the installed print head is not intended for this printer or is damaged.

  Original title: printer does not print

  I have a hp photosmart B110a all-in-one printer and the following warning came on the screen. "the installed print head is not intended for this printer or is damaged" useless to Sam the printer now does not work. can someone advise on how to remedy the situation. Thank you

  I have a hp photosmart B110a all-in-one printer and the following warning came on the screen. "the installed print head is not intended for this printer or is damaged" useless to Sam the printer now does not work. can someone advise on how to remedy the situation. Thank you

  Hello

  You will need to contact the HP Support for this hardware problem.

  HP drivers & support | United States:
  http://WWW8.HP.com/us/en/support-drivers.html

  You can also check on the Forums of HP Support for other users who may have solved that problem.

  HP - HP Support Forum Support Forum:
  http://h30434.www3.HP.com/PSG/

  Concerning

• Error message - cartridge in the slot on the left is not intended for this printer

  HP Photosmart C5280 All-in-one has been arrested and brought to the college for the summer.  Now, the error message above is displayed.  The 75 cartridge is correct and a real HP that worked previously.  Removed and reinstalled the cartridge, turned off and restarted the printer, removed, cleaned and reinstalled the cartridge without success.

  What is a printer or cartridge problem?

  The only thing that worked (finally) is the semi full Reset.  Thank you!!!

• Generic ink cartridge not recognized for HP printer

  Hello

  I used the same generic brand of cartridge for my printer HP 6313 since its warranty period has expired. The last being has been accepted and took the alignment process, and I used it. The next time that I turned on the printer about 3 days later, he came up with an error message "this cartridge is not intended for this printer. My sister who has the same printer says just as suddenly as it becomes the same error message. There was an update to Windows 7 that causes this problem you know?

  Thank you very much
  Sylvia Ferguson

  Contact HP for assistance, it is a question one or Microsoft Windows.

• Driver not intended for this platform

  I have 5 compaq presario c700 laptop, but I can use one for wi - fi! ?? I loaded at the bottom of all the network drivers for the site but the Atheros AR5007 802.11bg wi - fi adapter will not install showing "driver is not intended for this platform". Can I put the hard drive that works with wi - fi in all the machines and the wifi works well on all machines.

  All wi - fi cards are the same. I had sorted this problem before, but I forgot how I did.

  Help

  Concerning

  Darren

  Hello:

  See if this driver works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• Driver is not intended for this platform (install the latest driver for Verizon Wireless WAN (UNDP))

  Hello

  My Verizon Wireless WAN has worked on my T500 (2081CT 0, 4 GB of RAM, Windows Vista Business 64) since I received it last September. This morning it stopped working. Said that the card has not been activated. Ask Verizon and Lenovo have been pretty useless - each blamed the other, I so put on my own.

  -I uninstalled the driver for the Qualcomm HS USB card integrated, downloaded the latest version of the driver (transferred via CDROM since I can't connect to this laptop to the network where I work) and tried to install it. The HS-USB card is now displayed in the devices as "Unknown device" Manager (under 'other devices'), and his device status is:

  "The drivers for this device are not installed. (Code 28)

  Driver is not intended for this platform.

  To reinstall the drivers for this device, click on reinstall the driver. »

  Huh?

  Of course, reinstall driver does not work, the first problem is that he can't find online because I don't have internet connection without the card.  This driver has been installed from the following link:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-69999

  Seems to me that it should work on this machine. What I am doing wrong?

  -Some additional background: I've had several accidents recently, including at least two yesterday with blue screens. Easy to believe something has become corrupted, that's why I tried to uninstall and reinstall the driver.

  Help!

  Thank you very much.

  Solution was to uninstall the 'unknown device', search for new hardware and follow the promts by selecting all default values.

• cartridge not calibrated for better print quality hp5510 photosmart

  Cartridge not calibrated for the best print quality, Photosmart HP5510. Again black but very little about the colors, jump a few lines, monochrome printing. Tried to realign, cleaning of printheads etc..

  Hi, if your problem is of poor print quality then its majority as ly the cause is very low levels in your color cartridges. Here is a link to a support document which takes you through a few steps of troubleshooting, but you should probably have cartridges on hand before you start, because it is one of the first suggestions, you will receive.

  http://support.HP.com/us-en/document/c02914910

  Best.

• KB971029 is offered, but receive error message 'not applicable for this system.

  I had some freezes during the game Fallout3, so I got out and checked the update of Windows, because it is Tuesday, and I thought maybe it was attempts to update that was the problem. While you wait for the update to initialize, I went to the event viewer to see if some other glitch was responsible, and I saw @40 instances of this warning message:

  KB971029 is not applicable to this system.

  I stopped the update and rebooted to get some info, and it still has this update queued for installation. Can I ignore this as I did with the outdated ATI driver update which was on every list updated for many months?

  If it is so upsetting to you, a clean install will fix everything, Tom. Post in this thread and follow these instructions, see the ANSWER (to the letter and in the order!) to restore your computer to a State safe & functional.

  If it was my computer, I don't think I would just because an option, no security-related update wouldn't install... especially when all the security critical updates have been setup very well.

  In & out.

• Mouse - "driver is not intended for this platform" laser help?

  I have a Lenovo wired laser mouse that I got when I got my SL500, and it worked fine on it, but I recently put in a new hard drive and install Vista Business 64-bit and then well hell at work.

  Now that I'm gone, I started to install software and devices, well, mister mouse drivers and Vista 64-bit agree, and I get this wonderful message indicated in the title of the topic. I tried to download the software lasted and the mouse drivers cause also, I tried the CD first.

  What should I do now? Try the mouse drivers bluetooth or something prehaps? Try to install it as a PS/2 device?

  Good thing I really like my TrackPoint, if not I would be quite upset.

  Edit: I figured it, I uninstalled Ultranav, installed the mouse, then installed Ultranav again. It's pretty weird that is not only the work, or that it isn't some kind of alert. (I also turned off avast! and steam, so it could be them, but I doubt it)

  Marked as resolved - see Edit at the bottom of the post from Xeogin above ^.

• Satellite L30-114: driver not designed for this platform when installing IDE controller

  Hello! I have the satellite L30-114, I bought months ago. I have Win XP SP2 with all updates and the bios 2.3.

  A few days ago, I tried to reinstall the drivers for the ide controllers. I have delited in "Device Manager" and restart the system. After you start windows normally are both installed PCI - IDE controllers, then find ide channels (primary and secondary ide channal on ich) and the strange thing happens here: instead of the normal installation of these 4 channels, window "driver not intended for this platform". and after each reboot those devices Installing, to give me 4 windows "driver not intended for this platform".

  Now in Device Manager, I have 2 controllers IDE standard normal, and not 4 channel IDE working with yelow «!» The funny thing is that I not install new ide drivers. Drivers are the same who worked before reinstalling. Now the computer works, but is worth than before. on the toshiba site there is no driver Ide "planned for this platform.

  Anyone know how can I solve this problem? or where is located this driver? or what chipset whith this controller model in this notebook?

  Hello

  In my opinion, there is no reason to do something like that. If the laptop works well let it go. Go to the Toshiba download page and download driver chipset for your laptop model and install it manually.

• "cartridge in the right location is not intended for use in this printer"

  The printer monitor displays the message "cartridge in the slot on the right is not intended for use in this printer." We have not changed or replaced the cartridge. This is the original cartridge, and is not ink. The printer has worked the last time I tried to print, and I tried to remove and replace the cartridge in as well as restart the printer.

  I suggest that you call the HP Technical Support agents can do the necessary troubleshooting and replace the cartridge or the printer if it is faulty. Also, try to install a new cartridge and see if it works. This will help narrow down the problem to the printer or cartridge.

• HELP to the installed print head is not intended for use this product, or it may be damaged

  Help - please, I get a msg that says: "the installed print head is not intended for use in this product, or it may be damaged. I was trying many solutions I found on my search but nothing doesn't work.

  I was able to find the right answer to the problem I had with my printer. The printer that I have by the way is a HP Officejet 6500 E709a model.

  Here is the solution is simple:

  The print head is the device where sit the ink cartridges.  It may be incorrectly installed.

   

  Remove the ink cartridges (carefully, you can get ink on yourself).  Now using the system of grey lock on the right side of the cart, remove and re - install the print head.  Shake a little before lowering the lock wall.

   

  Now, re - install the ink cartridges.

  
  I had to do this process 2 times because the first time did not work. Make sure that when you remove the print head, the area is clean, try to remove the very careful, a little dust and I hope it will work for you also.

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Mail error 0x800CCC92: Operation of Pop is not allowed for this user

  Split of: ' "windows mail error code: ox800CCC0E, error code 10060".

  Account: 'mail.bigpond', server: 'mail.bigpond.com', Protocol: POP3, server response: '-ERR pop operation is not allowed for this user.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  It's what keeps appearing on my Windows Mail when I go in there. BigPond say they have problems with Windows Mail and try to fix it.  Any ideas please?

  Thanks LyndaBeresford

  If they have problems, then it is not that you can do about it until they solve these problems.

  You can access your e-mail via webmail: https://signon.bigpond.com/login?site=chw&goto=http%3A%2F%2Fmessaging.bigpond.com%3A80%2F%3Fref%3DNet-Head-Webmail

  Steve

• Download the file from the TFTP and get this error "this image is not valid for this platform.

  Hi guys

  You try to download a new IOS for my CISCO ASA using TFTP I get the following error

  Access tftp://189.206.211.24/asa825-33-k8.bin...!

  % Error copy tftp://189.206.211.24/asa825-33-k8.bin (this image is not valid for this platform)

  -Anyone has the same error.

  Also, I have tryied using the ASDM but I get the same error.

  Kind regards.

  Hello

  As says the Description This is not for model ASA5580.

  Click on the link connected with your account

  http://software.Cisco.com/download/type.html?mdfid=281191384&flowid=4378

  Then choose the software Adaptive Security Appliance (ASA)

  Then navigate through the drop-down list on the left

  Provisional-> 8-> 8.2.5 interim

  And you will get the visibility (click to enlarge)

  

  -Jouni