eSata problem

Similar Questions

• ESATA problem with windows 8

  Hello

  I have a laptop dv7 with an esata port.

  I have a g-tech external drive that works perfectly under 7 but not in the 8.

  He appears in the Manager for devices with an exclamation mark.

  G - tech said it's a problem of esata controller driver and contact hp.

  When it is attached to win 7 that no external driver was used, windows installed.

  Also the manufacturer provides no drivers.

  Any help appreciated.

  Sometimes, the chipset is listed.  Actually, it seems not to be included in the system devices and it's a little strange to me.

  The use of a third-party program will be necessary to check the bridge chipset and South of the system.

  Download the latest version of CPU - Z from here.  Don't forget to uncheck the options if you do not want (they are enabled by default).

  Once which is loaded, start the program and select the Mainboard tab and point out for the southbridge/chipset.

  External eSATA ports and USB ports, are largely controlled by the chipset drivers.  Update of these drivers may be the key.

• ESATA performance slow - response

  Windows 7 Ultimate

  Found slow ESATA problem on Dell Latitude. This isn't a problem but a response that I have been followed for 1 year.

  If you have the disk performance slowdown or ESATA: Device Mgr-> [device]-> policies-> enable write caching and performance. I went from 10 Mbps to 169Mbps.S

  Hello

  Thanks for sharing the solution. Hope this fix helps the other forum users encounter the same error. In case you experience other problems with Windows in the future, feel free to post your request here on the Forums of Windows, we will be more than happy to help you.
   
  Kind regards
  Anil Kumar

• Starting SL on second drive - test OK platform?

  Apple, Adobe, Silicon Image (eSata problems), Retrospect... you guys are scaring me. I've updated all the Macs I've owned since my first Mac 128 k! and never was more concerned about an upgrade. Of course, there are many moving parts since having started on a floppy drive :)

  Here's the plan... I want to use the readers in my MacPro and load SL. When I boot on SL more CS4 which is already loaded on the leopard disk behave as if they are native to the SL disk or Apple/Adobe move or tweak the files during the upgrade to SL?

  Thank you j

  Ideally, the CS must be installed on your startup disk. It's messy (if not non-functioning) If you try to run from another drive of the system.

  You can use your second simultaneous activation of CS on the SL disc, or you can run CS in trial mode. 30 days should be sufficient to see if everything works.

• Problem with Toshiba Stor.E D10, 1 of 5 TB external HARD drive and eSata connector

  Hello

  I have a problem with eSata HARD drive. I have a toshiba Stor.E D10, 1, 5 to external HDD. When I plug it into the connector back eSata, Windows 7 recognize this and I can read it, but when I try to write about it, it freezes and I have to unplug it. When I connect the Toshiba Stor.E D10 with the USB cable, everything works fine. The problem is when I use the eSata connector. I have updated the BIOS to the latest without any improvement. In the BIOS, I tried esata IDE and AHCI controller without success.

  My system: Windows 7 64 bit Ultimate, card mother Gygabyte GA-X58A-UD3R(rev. 2.0)

  Any help is happy.
  Thank you

  Javier,

  Hello

  Did you check and test the drive external DRIVE with other computers that provide the eSATA interface?
  I think that this should be done because theoretically the problem might be related to the laptop s / s computer eSATA port.

• ThinkPad W701 - deleted BIOS, USB/Esata mysterious problems before update

  Hello

  Yesterday I was supposed to tto try my new external drive esata, I had previously used with my EX495 homeserver, without any problem.

  But when I connected to the W701 it seemed that the connection has failed and the drive fell to sleep when I tried to write for her. When I used USB it worked perfectly and with the esata Server worked without a hitch.

  After trying some time, I decided to try the lacie updater and then a reboot. After that, all ports usb failed.

  I had already watched the Lenovo updateprogram and found some updates, so I ordered the computer with the trackpad and updated, but when the computer suddenly restarted and screen shows underscore flashing and that's it. After that, the screen went black and no longer lights.

  I it for 4-5 weeks now and after 1 week the Mo failed when defining new ram and has passed, there is now not yet - is there anything I could to, or should it return service?

  I did not help - Lenovo replaces the MB, at least this start.

• Problem XP w / eSATA controller & 500 GB Seagate

  I have a ' 04 Dimension 2400 that I added a SIIG serial ATA PCI card to and a Seagate Barracuda 7200.11 SATA 3 GB/s 500 GB hard drive. The controller properly installed and works according to tho the Device Manager. The Seagate is also indicated under "Drives" in the Device Manager and so-called "working properly". It fills correctly specifications drive under "Volumes", even if no volumes (rightly) of lists.

  But the drive does not appear in 'My Computer', so I can not format or use it.

  Any suggestions on how to get this working?

  Dimension 2400

  BIOS version A05

  Date of the BIOS 02/12/03

  2.40 GHz Pentium4

  Computer BIOS A05 date model Dimension 2400 BIOS vendor Dell Computer Corporation BIOS Version 02/12/03

  Windows version

  Processor

  Manufacturer Intel (r) Pentium (r) 4 CPU 2 .40GHz

  Clock speed

  Material Type Description CD-ROM/DVD-ROM readers SAMSUNG CD - R / RW SW-252 s Lite-On LTN486S 48 x Max drive WDC WD400EB - 75CPF0 GB 37.26 ST350032 0AS SCSI Disk Device 465,7 GB display card Intel (r) 82845 G/GL/GE/PE/GV Graphics Controller 256 MB VisionTek Radeon X 1300 series 64 MB VisionTek Radeon X 1300 series secondary 256 MB IDE controllers ATA / ATAPI Intel (r) 82801DB Ultra ATA Storage Controller - 24CB Primary IDE Channel Secondary IDE Channel

  2.4 GHz

  Microsoft Windows XP Home Edition

  
  

• Toshiba Stor.E D10 on Satellite A660 PSAW3E esata connection

  Hello!!!

  A few days ago, I bought a 1.5 to Toshiba Stor.E D10 eSATA HARD drive.
  I tried to connect it via the eSATA cable. At first I saw my D10 HDD 1.5 in Win explore (Win 7 Home Premium x 64) as drive E.
  When I tried to access the drive, I get a "device not ready" error I was expecting 5 minutes with HARD drive connected externally. I got the same error. When you look in the Device Manager in the records section I couldn't see it. All I see is the internal 640 GB HARD drive.
  When I connect it via the USB 2.0 connection, the drive is recognized and working properly. I could transfer data to this subject with 23MBps max on USB 2.0 speed is 60MBps (480 Mbps).
  As I work with huge video files (~ 10 GB per hour of video) I need an eSATA connection to expedite the transfer.

  Plese help me with this problem!

  BIOS for Toshiba StorE D10 1.5 TB HARD drive PA3827E external?
  Sorry, mate, but I think that you misunderstood the thread.
  There are no BIOS for an external HARD drive. BIOS are available for computers only.

• HP DV5 - 1235dx Downgrade from Vista to Windows XP start up problem

  Hi, I tried to downgrade from vista to XP and restarting the laptop after copying all the files from the XP CD, appears "Error loading operating system".

  After that I tried to restart my laptop and it freezes at the first screen which appears 'HP, press ESC to load BIOS' and I couldn t be able to access the BIOS.

  I Don t know what I can do! Please I need help.

  I tested my laptop computer with another HD and started normally but when I put my HD didn t do anything. I think the BIOS that my HD had a problem so I can´t use it.

  The specifications of my laptop are:

  Product number NB163UA #ABA

  Microprocessor 2.00 GHz Intel Core 2 Duo Processor T6400

  Microprocessor Cache 2 MB L2 Cache

  Memory 4096 MB

  Memory max 8192 MB

  Video Graphics Intel Graphics Media Accelerator 4500MHD

  Video memory Up to 1759 MB

  Hard drive 320 GB (5400 RPM) Western Digital (I bought a new)

  Multimedia player LightScribe SuperMulti 8 X DVD±R/RW with Double Layer Support

  Display screen 15.4 "diagonal WXGA high-definition HP BrightView Widescreen (1280 x 800) screen

  Fax/Modem Modem 56 k high speed

  Network card Integrated 10/100 Ethernet LAN

  Wireless connectivity

  • 802. 11 b / g WLAN

  Sound Altec Lansing speakers

  Keyboard 101-key compatible

  Pointing device Press the button with On / Off button and dedicated vertical scroll up/down pad

  PC Card Slots 1 ExpressCard/54 Card Slot (also supports ExpressCard/34)

  External ports

  • 5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card
  • 4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA
  • 2 headphone
  • 1 microphone input
  • HDMI
  • 1 VGA (15-pin)
  • eSATA + USB 2.0
  • 1 RJ-11 (modem)
  • 1 RJ - 45 (LAN)
  • expansion port for computer 1 cell 3
  • 1 consumer IR (remote receiver)

  Size 14,05 "(L) x 10.2" (D) x 1.37 "(min H) / 1.65" (maximum H)

  Weight 5.83Ibs

  Security

  • Location of Kensington MicroSaver lock
  • Turn on the password
  • Accepts 3rd party locking safety devices
  Power
  • 65W AC adapter
  • 12-cell Lithium-Ion battery

  What is in the box of

  HP Mobile remote control
  
  HP Webcam with integrated microphone

  Hi Daniel,.

  I tested my HARD drive in the other laptop and it starts normally, I did format and then I put in my laptop. I tried to install XP and everything was successful. I could install XP. I am very happy and I did not buy a new HARD drive.

  You are awesome!

  My problem was solved!

• Satellite Pro M30 and eSATA

  Hi all

  I recently bought the external drive western digital mybook premium ARE. This disc has an eSATA (external SATA) port.

  The problem is that my satellite pro m30 (model #: psm35e0021jar) is not the external SATA port. I found an ADDONICS (eSATA, ExpressCard 34) and another similar product from SIIG (eSATA II Express Card).

  The question is:

  1.) these products going to be compatible with my fairly old laptop?
  2.) is the hard drive of my laptop SATA technology is or what?
  (3.) what brand of motherboard used in my laptop?

  Thanks in advance and I cannot wait for the answers.

  Hello

  1.) these 3 products of third parties are not known to me, but as you know the Satellite Pro M30 does not support a SATA interface and if you want to upgrade the HARD drive, you will need to use the HARD disk with interface IDE (ATA-5) increased.
  (2.) No, as indicated above the laptop supports the IDE and not SATA
  (3.) the Satellite Pro M30 using motherboards Toshiba ;)

  A hint; If you have a SATA HDD, you can use it as a external HARD drive. This HARD disk can be connected via external USB sata controller.

• Satellite A500 - 1 GB - copy dialog crashes on the eSATA connection

  Hello

  I have trouble when using my Samsung storyboard (1.5 TB, eSata/USB 2.0) with the Satellite A500 - 1 GB (Windows 7 64-bit):

  (a) when you use the connector eSata (preferred):
  The drive is recognized by the system, and I can read the directory information. But I cannot copy or play the disc. The copy dialog box freezes quickly and cannot be terminated easily.

  (b) when you use the USB connector:
  It is also recognized by the system, but copy and read operations take ages - I have tried to make a backup of the system, but cancelled after 5 hours.

  The drive works fine with another PC (also Windows 7 x 64), so the drive itself should be ok.

  I've updated satellite drivers today (BIOS, chipset and responsible storage), but this did not improve the situation at all.

  The question is probably, due to the 150 versus Protocol SATA 300 SATA? A500 - 1 GB does support SATA 300 (SATA 2) or just SATA 150 (1 SATA)? Is there a specific SATA driver (Intel?) I might give a try? Where could I check who is currently SATA-used protocol?

  Or do you have other clues on how I could solve this problem?

  Best regards
  Waschlappen

  Hello

  Theoretically, your external hard drive eSATA connection could be defective so have you tested the USB connection only on your other PC or eSATA too?
  In addition, you should test another cable, I had a USB cable, did the same problem and after Exchange of cable, everything was ok.

  There is no special driver for it on the eSATA connection. I think that it s part of the chipset driver for reinstall the chipset driver could also be helpful.

• Re: Portege R830 eSATA - failure to mount the external hard drive

  {color: #000000} I have a new Portege R830 with combined eSATA / USB port. It will recognize an external drive in as drive 0 Device Manager but does not mount the drive under Win 7 x 64. The road rises and works absolutely normally under USB2 via the combined port or one of the other ports on the PC. The player works absolutely normally under eSATA on another desktop PC Win 7 x 64

  Search Internet suggests that this is a widespread problem with Win 7, but given the above commentary to normal operation on my desk, strongly indicates that it is "simply" a laptop Toshiba driver problem Win 7 x 64.

  A workaround solution that someone had reported was to boot the PC with the drive connected. This will lead to the PC mount the drive, but I found to be unreliable - tends to freeze the unpredictable machine, but when logged in it showed he was transferring data at a reasonable speed.

  The search for these forums, no solution has not identified... Toshiba - think you should answer it please!

  Afetr all is a 'feature' significant on the Portege and rather defeats the point if it is impossible to use...

  Kind regards

  Kevin {color}

  Hi mate

  First of all, it is a forum for a user to this don t address issues from Toshiba here in the forum, but other users of this community.

  Back to your question; Does this mean that the HARD drive connected to the eSATA port cannot be recognized as device eSATA but USB device?

  Please check if you are using the latest version of the BIOS. On the European driver Toshiba page, you can find the BIOS version transferred to 29/07/11.
  In addition, I recommend to check the BIOS settings; check if eSATA is activated it.

• Satellite L650 - eSATA/USB combo port does not work

  I donot have esata devices. but as I know that I can still use this combo port to connect usb devices. However, I have tried mu esternal hd (2.5') and USB receiver usb (for mouse and keyboard) and some other usb for iphone and sgs2 cables. None of them worked!

  can someone help me with this problem? is this a hardware or just problem that I missed something.

  Help, please.

  Hi alwayseric,

  What operating system do you use?
  Have you checked for yellow exclamation marks Device Manager?
  If you connect USB devices to the normal USB port it works?

  I would recommend a chipset driver. It's worth a try, and you can download it here:
  http://EU.computers.Toshiba-Europe.com

• Qosmio G50/04J (Q55) WD eSATA external HARD drive crashed windows Explorer

  Hi all, this is a crazy...

  I've been using a WD MyBook drive for a year with USB, no problem, except the message of 'the write failure delay' occasional (big problem with WD drives)

  I bought an eSATA cable as the reader has an eSATA back port.
  The first time I used the command via eSATA was pretty sweet. Reading/wirte speeds.
  After 2 days, I noticed the the remaining on (unusual behavior) drive activity light.

  Now, whenever I turn on the drive when its plugged into the port, eSATA, windows Explorer crashes.
  I can make it appear 'task manager' sometimes, but cannot successfully "end task" or close.
  Windows + R will show the Run dialog box, even if I can't restart explore this way.

  Can anyone help? I contacted WD and they said this is the first they have heard of this problem...

  Cheers in advance

  Thank you for this interesting feedback, companion! :)

  You are welcome!

• Qosmio G30: Boot from HDD external ESATA

  Dear all,

  I am trying to boot from a disk external HARD connected with an express/34 card that has a START function. It works like one charm on another laptop manufacturers because the express/34 card is recognized without problems. I can choose the external sata HARD drive as a bootdevice.

  My BIOS (V3.5) Qosmio G30 seems not to have this option. Any suggestions? Thank you for your comments!

  card esata Express/34: http://www.cooldrives.com/2saexcadues.html (ROM BIOS supports boot features)

  Kind regards
  Nboss

  Hello

  These function the BIOS boot options.
  The BIOS that is installed on the G30 is no option. So unfortunately, but there is nothing to do!

  Best regards