using ramdisk to speed of rollup and Essbase calculation

Similar Questions

• measure the angular speed, angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition

  How to measure the angular velocity, the angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition?

  There is a single channel data acquisition code which measures the angular velocity, angle and flexibility using a gyroscopic sensor breakout board and acquisition of LabView data attached to this, I need a help to creat two-channel data acquisition code?

  Hello

  Attached is a vi that you can use in order to read the measured angular position of an encoder.

  If you need more examples on the tasks that you can develop with NOR-DAQmx and LabVIEW, you just need to open LabVIEW and click Help > find examples > Input and Output material > DAQmx > entry counter.

  Kind regards

• Speed of scanning and samples for FFT affecting dt

  Hello

  I have currently acquire the accelerometer data and the value of the scanning speed of the clock to 5120 s/s. I use then the analog 1 d Wfm Nchan N Samp to acquire 5120 samples, then use analysis FFT on it to create a chart of the frequency. It gives me a dt 1 that is a resolution of 1 Hz.

  The question I have is how can I sample the data with a dt 1 at a faster pace.

  For example, I change the speed of scanning on 10240 and always acquire the 5120 samples, allows me to taste two times a second, it gives me a 2 dt (2 hz resolution) when I do my FFT analysis. All that happens to raise the rate of scanning for the sample clock is that I can now detect the peaks at higher frequencies.

  By that I mean if I just scan 5120 s/s with my card, when I TFF, it goes up to 1100Hz about, if I double the speed of scanning, then this double to about 2200Hz, she then reduces the resolution

  How can I improve the speed of update and still keep a 1 DT?

  Thank you

  Mike

  
  

• Fan of D4T - 1500 HP continuous switching speed between hi and lo

  My laptop is switching speed between lo and hi when the battery and the AC adapter / CC are connected.  If disconnected the unit is operating normally.  It does not matter if I have a window open, 3, 6...   I replaced the original battery (2009) with a battery 8800mAh to increase time between charges about 6 months ago.  The battery has a bump to raise the notebook off the surface, it's on and improve the flow of air.  Everything was fine until a few days ago.  The Unit feels not hot when the bike fan starts but stops immediately after disconnecting the adapter or pulling on the battery.  Any thoughts?  Thank you.

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion dv4t-1500 Notebook and having issues with the fan switch to salvation and weak. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices. If that doesn't help try to turn on the computer, on which you begin to press F11 repeatedly until the menu opens. You can do a System Restore. System Restore will return the computer before this fan problem began.

  Here is a link to test and calibrate the battery. Here is a link to test the ac adapter.

  If everything fails, you can try to restore the default BIOS. This would force the machine to look at what the material is on the laptop.

  Hope it will be useful.

  Thank you.

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• ODI 12 c and Essbase

  Hello.

  I recently downloaded ODI 12 c (I have a problem with two versions: 12.1.2 and 12.1.3) and installed on a machine. and Essbase v11 on a different server.

  as you know, there is no any driver preinstalled for Essbase in ODI and I couldn't find companion package ODI 12 c to Oracle.com.

  so, I downloaded companion 11.1.1.7 and unpacked, added its KMs from xml-reference to my 12 c ODI knowledge modules.

  but when I want to debone my model using RKM Hyperion Essbase -Essbase, it gives me this error:

  ODI-20754: driver name can not be empty

  ava.lang.IllegalArgumentException: the driver name cannot be empty

  at org.springframework.util.Assert.hasText(Assert.java:161)

  at com.sunopsis.sql.SnpsConnection.setDriverName(SnpsConnection.java:430)

  at com.sunopsis.dwg.dbobj.DwgConnectConnection.setDefaultConnectDefinition(DwgConnectConnection.java:432)

  to com.sunopsis.dwg.dbobj.DwgConnectConnection. < init > (DwgConnectConnection.java:280)

  .

  .

  .

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)

  My jdk = 1.7

  
  

  
  

  could you help me please?

  I am aware that ODI12c is not yet supported with Essbase knowledge modules.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• The upgrade of RAM will improve the speed side Windows and Mac?

  I use VMware fusion for music production and this program requires plenty of work. I have a MacBook Pro 4 GB of ram and when I turn on VMware it goes to 2 GB of ram in Mac and 2 GB ram under windows. My Mac's speed is normal when VMware fusion is off but when I turn on my Mac is very slow. The upgrade of ram will improve the speed on mac and also windows (windows is also very slow)

  BTW, my English is not very good

  Well, take a peek in the Windows Task Manager to see how much memory is required/used. If an operating system requires more memory available, it will start to swap out the disk, which will introduce a huge performance impact. If the answer to your question is probably yes.

  André

  PS: After adding memory to the host, you must also change the client memory for the virtual machine.

• Migrate an application Hyperion 11.1.1.3 EPMA planning and Essbase 11.1.2.2

  Hi all
  
  We have applications EPMA planning and Essbase in environment Hyperion 11.1.1.3 with all artifacts as Scripts, etc. reports for the file, business rules, rules.
  
  Now, we want to migrate these applications to the new installed 11.1.2.2 environment.
  
  Using LCM or don't we have another method to migrate these applications?
  
  answers would be appreciated.
  
  Thank you
  Mady

  We have upgraded 11.1.1.3 11.1.2.2 according to oracle documentation version.

  Thank you for your time and your answers. I close this topic.

  See you soon,.

  Mady

• Doubts with LCM and Essbase Studio.

  Hi, I come back to Essbase world after several years of working with other platforms (specifically, Business Objects) and I'm trying to understand how the LCM with cubes designed with Essbase Studio 11.1.2.2.
  My client works with 3 atmospheres, Dev, pre and Production. So, when I draw a cube from a relational database in Essbase Studio this cube uses a dev environment relacional database and now is when my doubts, if I use the LCM to promote the cube of Dev to pre, how to change the connection uses the database relacional of pre-production to load and forest - through actions?
  best regards and thanks!
  Jaime

  Yes, import and export in the Studio is the method to use, I don't know it will be integrated in LCM someday.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What is the difference between EPMA and Essbase Studio

  If the two are not used to design applications?
  
  And a really need Essbase Studio?

  What is the difference between EPMA and Essbase Studio

  ^ ^ ^ It's a little confusing, isn't? As far as I understand the role of EPMA, it is a way to share dimensions and common data between several products Oracle EMP including Planning, Essbase and HFM. In fact, I don't know if other products live in EPMA. What is EPMA not have is a great way to supply or manipulate the dimension and fact tables (or files). Oh, there are tables of the interface, but you will write the code/use the utility of dimension EPMA to load dimensions. I must say that I never tried to load through EPMA data so that someone else will have to pronounce on it. Once the dimensions are built, you can deploy Essbase (and other products) of common and specific to the database dimensions.

  Studio is the tool you will use to go against a data warehouse, or something terribly close a data warehouse to build Essbase databases. Just for Essbase - HFM, planning, etc. are not the targets of the Studio release.

  What gets confusion / intriguing, is that when EPMA deploy Essbase apps, it uses Studio under the covers to do. So the interesting implementations where people use Studio (which is much more flexible than EPMA because it is a development tool as opposed to a dimension/data management application) to read the tables, EPMA interface (and as far as I know, the EPMA base tables) and create Essbase applications like that.

  If you think that there is overlap, I agree with you, but you can see that they are not the same.

  And a really need Essbase Studio?

  ^ ^ ^ Do not use Studio to build Essbase databases. You can go hog wild in EAS with loading SQL rules if you want, even if at some point it will be probably easier and simpler to build in the Studio. Although the Studio has been mentioned as the replacement of EAS for awhile, I suspect the effort required to build a database in Studio will keep around for quite a while EAS or Studio Lite will be out. There is a lot to say (sometimes) for the incredible flexibility EAS/Essbase-Studio requires a more methodical approach and EPMA has a very formal set of standards and methods.

  Phew, I'm sorry, I wrote a book on this subject and I bet you get a lot of differences of opinion on that.

  If you are interested in the Studio, you could do well to take a copy of 'Look smarter than you are with Oracle Essbase Studio 11' of Glenn Schwartzberg. I don't get a penny from the sale while I was among the writers of copy (Hey, I got a mention in the acknowledgements). It's a good book and an excellent introduction to the tool.

  Kind regards

  Cameron Lackpour

• Adapters for planning and Essbase v11.1.1.3 ODI

  Hi John,.
  
  I would like to know if I can use the ODI planning and essbase v 9.3 with Hyperion Planning and Essbase v 11.1.1.3 adapters.
  
  If there are updates available adapters to use with the v11, please let me know the link to download the same.
  
  Thank you
  Sravan

  You have something against marking my answers useful/correct :)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Best way to migrate (RDBMS and Essbase) planning data between systems

  Hello. I need to migrate data from planning (fact data relationship of Planning (time and text comments) and Essbase). Migration of Essbase is relatively simple (migration of Essbase dimension data and then export and reload fact Essbase data) but I'm not sure on the best way to migrate relational data 100% done. Should I do a dump of the schema and then migrating the other system of planning? Thank you.
  
  It comes to 11.1.1.3.

  Like you're on 11.1.1.3 I suggest to use LCM to migrate the planning elements.
  An example on how is available at:-http://www.oracle.com/technology/obe/hyp_ss/SS11.1.1_PLNLCM/PLN_LCM_OBE.htm

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews?

  My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews? OS X El Capitan 10.11.4

  I'm ' dropped in ' the answer! By changing the name of the ".m4v" to ".mov" file preview is now fixed! Billy just got lucky...

• Have a Mac mini end of 2012 OSX elcapitan cannot use airdrop with my iPad air2 and mini iPad and iPhone 5, while the iPad and iPhone work fine with airdrop.  Can anyone help?

  Hello

  I have a mac mini end of 2012, air2 Ipad, mini iPad and iPhone 5.  I have a problem: while I can use airdrop between iPad and iPhone, I can't use airdrop

  between mini mac and other devices that I own and vice versa.  Can someone help me?

  Thanks Vincenzo

  Mini PS mac is updated with OSX El Capitan

  The Mac sees the iOS devices in AirDrop?

  IOS devices see the mac in AirDrop?

  It worked before?

  Have you put off, then back on your router?