Essbase & OPMN services for Essbase not getting started

Similar Questions

• Hyperion OpenLDAP service is not getting started

  Hello
  
  Need urgent help.
  
  Hyperion S9 OpenLDAP service is not getting started on windows server after unexpected server restart. I get the following error
  
  "Windows could not start the Hyperion S9 OpenLDAP on Local computer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 21-specific error code. »
  
  I tried running the recovery exe "openLDAP\bdb\bin\db_recover.exe". But always failed to start the service.
  
  I use version 11.1.1.3 to Hyperion.
  
  
  Kind regards
  Sunil.

  Have a read of http://john-goodwin.blogspot.co.uk/2008/08/bring-back-my-openldap.html

  If you still have questions then you need to restore from a backup file

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• P780 - do not load, not getting started, cannot be reset

  Hello

  I have my P780 for about 4 months. So far there is no problem with anything, but this problem came yesterday.

  My battery got completely emptied (and the phone turns off) just at the moment where I plugged in the charger. I checked the red indicator near speaker and it was brilliant - that's why he was in charge. I waited a few minutes give the battery a few time charging ot a bit, but after that the phone started not at all. I waited more - the red light stopped incandescent and phone has not started.

  Now, when I plug the phone to the charger, the red light lights only for a few moments and it goes off.

  I tried to restart - both buttons button and the buttons power + volume, but nothing works.

  Is this a problem with the battery or the ro the entire phone connector is down?

  Edit: phone also unresponsive when it is connected to the computer - I have seen some users describing when they have connected the phone to the PC, he showed as a usb connected device, but this isn't the case

  Thank you very much for your reply,

  Robert.

  Unfortunately, I can't recommend a Lenovo's Service Center for mobiles. As you say, Lenovo phones have not officially been launched throughout Europe still if we are somewhat embarrassed by getting our phones served.

  There is a numnber in Russia which is for Russian and English that you can see at http://mobilesupport.lenovo.com/us/en/contactusmidh/supportphonelist otherwise you could try to return to the place you bought it from.

  Battery replacement is easy, the Lenovo site we even lists the P780 as having a battery replaceable by the user, the more difficult part will try to source a new at a good price.

• Dgraph not getting started

  Hello.
  
  Dgraph is not some of the dgraphs to engage in my environment, it make has this race but when try to restart one of them even that is also a failure to start.
  
  I could see Dgraph.log where his hit on below place.
  
  17/05/13 INFO 21:12:54.893 UTC (1368825174893) DGRAPH {dgraph, baseline, update} treatment update: beginning.
  17/05/13 INFO 21:12:54.894 UTC (1368825174894) DGRAPH {dgraph, baseline, update} no new updates to deal with right now.
  17/05/13 INFO 21:12:54.895 UTC (1368825174895) DGRAPH {dgraph, baseline, update} treatment update: completed.
  XQuery fn:doc() URL for loading is disabled
  Web services in XQuery loading...
  
  When I looked the dgraph running dgraph.log it is trying to load objects from Xquery of MDEX, some how now this isn't the case.
  
  any help is appreciated.
  
  Thank you and best regards,
  Renault R

  Sorry for the late reply,

  The problem came from the limitation on the server CPU, after server bios settings change, Dgraph started without any problems.

• Equium A60-692: Texas controller ieee 1394 host controller starts is not getting started

  I had unfortunately no response about the foregoing. I have Equium A60-692 and installed the new copy of XP.

  Before that, I inherited machine with power stuck on the password. Former owner had left standing for several months and said this seems to cause this not tentatives not this setting. I managed to use a rider based on the to remove, but now I think it was a symptom of more serious problems (but maybe I did something BIOS?)

  The controller seems to be when the machine is hot (strange). Fact that average anomaly map mother re ccomponent ventilation cold?

  Any help here, because I have tried everything I can.

  Have you set the BIOS to default settings?

  Hmmm... What about the question of hot/cold? I imagine that certain welded components can lose connectivity when the laptop is cold.
  In my opinion, you should install driver chipset when possible. Subsequently disable device firewire in Device Manager. I mean that this port is probably not so important to you. Isn t it?

• I unplugged and am now re = connected, but can not get start when I pressed on the on

  As I said, basically he just starts well plugged?

  Hello

  Your question does contain all required information necessary for help us to you to. Please re - write your question, this time make sure you have all the necessary info and we will try to help.

  http://support.Microsoft.com/kb/555375

• on the Startup Document error message: service Manager could not be started. Please check that filter Vault is loaded and executed.

  Is there a way to fix this?

  Hi ReyXimenes,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• New to ID and you are looking for help in getting started

  Hello

  New ID, he bought the other day. Working with Adobe Creative Suite, DW, FW, PS and Flash sort.

  I ID like and would like to do some stationery namely cards biz, creation of letterhead etc..

  Someone at - it a good video tutorials on this subject they might recommend.

  ID "seems to" work a little differently to how I thought, only had a little go, so think I need a little time to see on how to use it.

  I find Adobe go of in for details, I'm just after the bases of the creation of the first stationery then will work in my view some of the other features it seems to offer.

  Thanks in advance.

  To bring external content on your page, you use the file > place command.

  PNG is not the best possible format for images for printing, but much will depend on how the printing will be done. In general terms, printing images must be much higher tose Quen resolution used for screen display. To print on a desktop device you will want to "effective" resolution (resolution to the size, it will be printed, not the size, it has been saved) somewhere around 150-200 dpi for continuous-tone images. The press usually to 250-350 ppi. Line art must be in the range of 1200 dpi.

  Text is colored by applying a sample or using the color Panel. If you look at the color chart or the color Panel, or next to the colored boxes to the bottoom of the Toolbox, you will see a pair of buttons, one that looks like a T and another that looks like a square. When the T key on the color will be applied to the text. When the sqare button is active, it will apply to the frame. The two colored boxes represent the (solid box) fill color and stroke color (hollow box) and the one in front is active, similar to the foreground/background in Photoshop.

  Color for printing is quite tricky and depends on the method of printing once more. On a desktop device or a color copier, you can be pretty free with what you use (but don't expect an exact match for a spot color - or any other color if your monitor isn't calibrated and you don't have an output profile good - but this is a whole different debate), but on a press, you use either CMYK , which requires 4 plates and costly for small series or tones, each of them also require a separate plate, but are ideal for the type of color and logos.

  Take the advice of Bob. Spend time to Lynda.com and try to learn as much as you can about printing, too, if you want to work in color. More you know about the ink on paper easier design and the use of will become ID. If you can find a class at the local Community College or adult education, try also. InDesign is in fact a very complex program.

• Service request not getting associated with the Contact

  Hello
  
  We have an interface between the Web site of our company and Siebel On demand application, visitors can come to our Web site and submit a request by filling out a form with their contact information and their request. In turn, this creates a folder 'Contact' and a 'Request for Service' in the Application folder,
  
  'Contact', we used WSDL and v2.0 "Request for Service" WSDL as the webservice interface, we find that the Contacts and requests for services are created as that individual records, service demand does not get associated with the contact record is created?
  
  We are capture the following information under the heading "Contact".
  First name:
  First name:
  E-mail:
  Phone:
  Address:
  
  and the following information under the 'Service request'
  Product information:
  Object:
  Description:
  Type:
  Status:
  
  Should the specify us anything else under the Service request in the interface that will associate the Contact and "demand for services.
  
  Is it because in version 2.0, each object exist as separate nodes that we are facing this problem?
  This will be solved by using v1.0, is there a limitation any using v1.0, please specify
  
  You can call me if you need additional information
  
  Thanks and greetings
  Satish Kumar
  + 1-857-869-0239

  Hello

  When you create the Service request, make sure that you set the field "ContactId" so that the created contact is associated with the SR created.

  -John CRMIT

• Essbase error 1042012 - OTL file does not get replaced by OTN file

  Hello users,.
  
  I'm trying to change the contour of the ASO, but it is error and gives as follows. I checked the files on the disk and realized that OTN did as well as the OTL file. I deleted the OTN file and tried to do the load, but somehow the file OTL is not get replaced by the OTN file. I tried adding members manually but failed there, too. Anyone can share their experience on this topic please?
  
  
  
  
  
  
  The DEV_ASO1 database management
  App DEV_ASO loaded - connection established
  Start the application [DEV_ASO] with the process id [10664]
  [DEV_ASO1] the object is locked by the user [dubes@Active Directory for Hyperion]
  [59575033] the object is locked by the user [dubes@Active Directory for Hyperion]
  Strengthening of the elapsed time Dimensions: seconds [2,683]
  Unlocked by the user [dubes@Active Directory for Hyperion] [59575033] object
  Playback of database settings [Drxxxxxx]
  Said size Dimension = [385 19 13 68 145 449 1650 11087 4 23 6 74 60 360 3 17 12 5 95 6 17 93 24 23 10 9 8 38 10 3 2 2]
  Sizes of Dimension real = [379 19 13 66 142 449 1648 11080 3 23 5 74 60 360 3 17 12 5 95 6 17 93 24 23 10 9 8 38 10 3 2 1]
  The Member [Project_Cnt] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Non_Labor_Accts] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Project_Dur] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Budgeted_Project] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Budgeted_Project_old] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Unbudgeted_Project] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Unbudgeted_Project_Per] is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [Delta_BPAPF_Per] is complex. If possible, add a non-empty directive for scattered data optimization.
  [QTD] member formula is complex. If possible, add a non-empty directive for scattered data optimization.
  [CDA] member formula is complex. If possible, add a non-empty directive for scattered data optimization.
  The Member [3MoAvg] is complex. If possible, add a non-empty directive for scattered data optimization.
  [HTD] member formula is complex. If possible, add a non-empty directive for scattered data optimization.
  Error network [10054]: unable to send data
  Error network [10054]: unable to send data
  Unexpected error Essbase 1042012
  Unlocked by the user [dubes@Active Directory for Hyperion] [DEV_ASO1] object

  It's a big complaint by many customers that the compact feature does not work and you need to re-create the outline or by using the esscmdq to separate esscmd tool.
  I agree that this kind of functionality should certainly be available by default through maxl and eas now.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Essbase doesn't start or stop because of the opmn.xml

  We have Linux servers (all x86_64) with EMP 11.1.2.3. We have a tiered server configuration. EAS is a box (the foundation server) while essbase is on another box (the Essbase server). What is our problem that we have followed the readme for patch EAS. We applied the EAS disponibles.003 patch. Immediately after that, we tried to connect to Essbase through EAS. No luck we had the network error 111 camps.

  We tried a few things. we made look oracle article id Doc-id 1277055.1 for the #4 error:
  Error 4:
  
  [Starter] oracle.as.management.opmn.optic.OpticException: error from Server opmn
  [start] Operation cancelled due to an error or bad value specified in opmn.xml
  

  
  

  The solution for #4 has no solution.
  We also tried the 1668964.1 article ID.
  

  
  

  Please give your advice that we currently have a ticket open with Oracle support.
  

  Ladies and gentlemen,

  Below is the solution after working with oracle support.

  Morten Jensen blog: Oracle Configuration Assistants when sqlplus, emctl, opmn and same oraenv fault to start

• at the start of geta pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  starting to get a pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Method 1:

  I suggest you uninstall and reinstall download System Manager and check if the problem is resolved. See the article mentioned below.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  This appears when I try to connect with Microsoft Account.

  I tried all the possibilities that was displayed in the link but when even the problem exists... below you please suggest me the solution to add the microsoft account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/sorry-we-couldn

  Hi Nikhil,

  If you connect through a proxy, then I suggest you to try the steps suggested in this article and checking:

  http://support.Microsoft.com/kb/2778122/en-us

  Keep us updated on the results.

• Get started with Oracle ADF DI 12 c tutorial does no not for me

  Hello

  Apart from a few differences with the screenshots I was not able to get the tutorial Oracle JDeveloper 12 c (12.1.3) tutorials - Getting Started with ADF Desktop Integration running.

  I'm not able to find information online on the error message I get at the end of part 2, when am I supposed to run the EditTable_LOV.jspx application for the first time:

  Error: < J2EE > < BEA-160187 > < weblogic.appc failed compile the application. Recompile with the option - verbose for more details on this issue. >

  Is it possible to understand what is the real issue or the tutorial work well for 12 c?

  Thank you.

  Fede.

  I went to libraries and ClassPath section under the project properties and go to the Java SE 1.7.0_51 (one I already had in my system) and now I have the operation of the application.

  Change the version of Java is the answer. Thank you!

  Fede.

• Why am I being charged every month on my credit card, but im not getting no not my app services! and because the system does not show me as a premium member I can't contact anyone for my refunds or changes! Help, please!

  Why am I being charged every month on my credit card, but im not getting no not my app services! and because the system does not show me as a premium member I can't contact anyone for my refunds or changes! Help, please!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html