Essbase Smart view Setup error

Similar Questions

• Smart View Timeout errors... again.

  Hello

  I have a strange problem with users receiving the Smart View Timeout error.  In a connection planning, executing business rules, some users automatically receive a message "request timed" out with instructions to "extend the parameters of «ReceiveTimeout, KeepAliveTimeout and ServerInfoTimeout.»»

  I studied this problem online for a solution and has confirmed that the following Windows registry settings are at stake:

  HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/InternetSettings

  KeepAliveTimeout 720000

  ReceiveTimeout 720000

  ServerInfoTimeout 720000

  Note that these settings are not present in:

  HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/InternetSettings

  720000 = 12 minutes.  However, users get this message to approx. 30 seconds in the rule.

  I have the same registry settings on my computer, running the same business through the same connection of planning rules, and yet I don't receive time-out errors.

  Am I missing a setting somewhere?  Time-out settings must be in HKEY_CURRENT_USER instead of HKEY_LOCAL_MACHINE?

  Tom

  Hi ToX,

  Yes. These parameters must be created in the registry "HKEY_CURRENT_USER". That fixed the problem for me when I fell on the same subject.

  HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/InternetSettings

  Thank you

  TT

• Smart View recovery error

  Hello all, retrieving smartview, I get the following error.

  "Request Timed Out. "Contact your customer smartview system administrator to extend your Windows Internet Explorer time-out settings (receive Timeout, KeepAlive Timeout and ServerInfo Timeout).

  Please can anyone suggest where the parameters need to be changed. FYI, we are at Version 11.1.2.3 of smartview.

  Thank you

  Ted.

  Try Oracle Support - Smart View error: "the application has expired. Contact your administrator to increase netRetrycount and netRetryInterval"(Doc ID 744559.1)

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Smart View 1935 Setup error

  Did someone got an error 1935 when installing smart views? My helpdesk told me I need a registry exception, but I have to tell them what it is and where to put.

  Re-install Smartview customer when logged in as a user with full Local administrator rights to the computer being installed.  Your user rights are insufficient to perform the installation

• Error recovery Smart View

  Hello

  We have essbase 11.1.2.4. And financial users connect to the cube by Smart View (11.1.2.5.500), they generally put tabs in place in a worksheet to recover the cost for each tab Center, but he gets the following error:

  Unable to connect to provide. The connection to the server failed. Make sure that the server is running in the specified URL

  But APS and essbase works well.

  Any advice on this

  Thank you

  you could do with a macro and HypConnect

  Details of smartview Developers Guide here:

  HypConnect (vtUserName, vtPassword, vtSheetName, vtFriendlyName)

  Parameters

  vtSheetName: the name of worksheet on which to run the service. If vtSheetName is Null or

  Empty, the active worksheet is used.

  vtUserName: valid username

  vtPassword: the password for this user

  vtFriendlyName: the friendly name of the provider of data connection. It's the connection

  name created by HypCreateConnection.

• Smart View Shared connections - Oracle Essbase - how comes?

  Test the new version of Smart view 11.1.2.2.310 on Office Excel 2010.  In Shared connections I show three Essbase servers

  EssbaseCluster-1

  EssbaseCluster-2

  EssbaseCluster-3

  Through the Regional service, ago only EssbaseCluster-3.  This file or search is connections shared pointing to 1 and 2?  If I try to open them, they give an error "unable to connect to the Essbase server.

  How can I remove these?  Click on the option delete is not available...

  JTS

  It is usually being taken from the register of Shared Services, if you run a report of registry you have 3 groups?

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Using Variables of Substitution Essbase in Smart view?

  I have several Smart View excel spreadsheet running in a 3-year budget cycle.
  
  It would be great that instead of FY10, FY11, etc.. I could use the substitution variables essbase for the fiscal years (actual spending instead of FY10, running instead of FY11) so when the rotation exercises I did not change the forms.
  
  Tried to enter on the form and get an error that it can't find the Member during the refresh
  
  JTS

  Thank you all,

  It seems that the characteristics you describe are not available in the 9.3.1

  We intend to migrate 11.1.2 the end of this year.

  JTS

• Smart View - Essbase: connection clear the data grid

  Hi all

  I use Oracle Hyperion Smart View 11.1.2.3.000 and Essbase 11.1.2.3.000.4415 in Excel 2010.

  My spreadsheet contains data that I need to load into Essbase, but when I try to connect, the data grid is disabled...

  I have a workaround: duplicate the sheet, connection, and then copy - paste the data in the sheet of "new".

  It's very frustrating, is someone can help me please?

  See you soon,.

  When you refresh this worksheet for the first time, connecting to Essbase, going to go ahead and automatically retrieve the data of the cube - it is a normal behavior.

  Your solution - make a copy of the grid, refreshment and copy in the back, is the best workaround.

  Thank you!

• Error when using Smart View install link in the workspace

  Hi all

  We recently definitely use Smart View 11.1.2.5 instead of 11.1.2.1.

  So role the file to our users, we must update the link in the workspace.  I did it, copy the new .exe and file version.xml to our server that hosts the workspace, in the path of file Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/SmartView.  I then removed the old files.  Now when I connect to HFM and go to the link, after a period of a few minutes, I get the error "Cannot find a version of the runtime to run this application."

  I tried to restart all of the services, a dead-end.

  No one knows what to do to fix this error?

  Thank you in advance.

  Brian

  Reply to my own post.

  This is a known defect in Smart View 11.1.2.5.  HFM Workspace do not recognize as valid an installation link.

  Thank you.

• When you perform queries Smart View Ad hoc, changing the selection of the Alias in the Essbase himself Ribbon

  Hyperion Planning

  GPE, Fusion edition, 11.1.2.2

  Smart View 11.1.2.2

  When running Smart View Ad-hoc queries, selection of the Alias in the Essbase Ribbon does not.

  When I start a new query, the Alias in the Ribbon of Smart View is always set to None; but often, not always, the selection will change itself no default - usually after I refreshred/zoom a few times.  He starts a time past, I change the selection of the Alias in the Ribbon in none, but it changes just itself by default again.

  The option to display the name of the Member is defined on behalf of members only.  (This is the default setting for this option and I usually begin with all the options, by default).

  This problem started after that we went to 11.1.2.2.

  If neither know why the Alias / None change automatically in the Essbase Ribbon?

  Thank you

  Veronica

  There is a way that you can set for your connection

  When you use shared connections to connect to your application, you do a right click and say "Add to private connections". Once you have added to your private connection, right click and click 'Set Alias Table'. You can do this on a connection that you have added to private connections

  Concerning

  Amarnath

• Smart View for Essbase unavailable in rapid deployment planning

  I managed to deploy EMP 11.1.2.3 by following the steps in the deployment planning guide (http://docs.oracle.com/cd/E40248_01/epm.1112/epm_planning_rapid_deploy/epm_planning_rapid_deploy.html). However, when I do the Smart View by using a URL of shared connections to http://< servername >: 9000/area of work/SmartViewProviders, I only get the connections for the planning and of the declaration and framework. How an I get a connection for Essbase?

  It turns out that 11.1.2.3 rapid deployment planning wizard does not install Essbase service provider, just planning service provider and Reporting and analysis of service provider. Until that I installed Essbase service provider, I wasn't yet able to create a private to Essbase connection. I had to run InstallTool.cmd and select "Provider of Services Web Application" in the Essbase selection screen section. I also had to run the configuration utility and select "Deploy to the application server" under "Service provider" in the Essbase selection screen section.

  After that, I was able to create a connection in Essbase with this URL: http://: 9000/aps/APS

  Even though the private connection was working now, the Essbase connection was still does not like a shared connection in Excel, when I put the Excel Smart View option for shared connections URL http://: 9000/area of work/SmartViewProviders. I could get this job to rerun the configuration utility and selecting "Configure the Web server" in the section "Hyperion Foundation" of the selection screen.

  I was also able to create an XML file as Celvin suggested using http://: 9000/aps/APS for connecting to Essbase. Thanks for the suggestion!

  -Tom

• Remote Server Exception error Smart View

  Hello
  
  A customer has access to a report EN in Smart View using Reporting and analysis framework (RAF), when they received the following error "Oracle Hyperion Smart View for office, Fusion edition":
  
  "Server remote exception has occurred." Please see the logs of the client and server for details
  
  If this exception can be resolved? If so, how?
  
  Thank you.

  Version EN?
  See the Smart version?

  extract log view smart file by activating smart view the journal through Smart view > options > message road to the log file.

• Smart View Excel Add - In Error Message

  A client was trying to perform Smart View and it crashed. The display then shows the message/question Excel:
  
  «Excel has experienced a serious problem with the snap "oracle hyperion smart view for office, edition of fusion".» If you have seen this message more than once, you must disable this add-in, and check to see if an update is available. Do you want to disable this add-in? "(Yes/no)
  
  The customer has NOT disabled, but rather disconnected Smart View and then reconnected. When they did that, they were hunted Smart View after a few minutes and was then again reconnect.
  
  Is there a solution for this problem? They really need disable the add-in, and then add the Smart View? Please indicate the exact steps to solve this problem.
  
  Thank you.

  Hello

  Whenever I encounter this problem, I simply close excel, put an end to all the processes related to excel and excel reopens.

  However, said that the problem is known and we have a new bug to the same EXCEL CRASHES when YOU OPEN OR SAVE a FILE [Bug ID 12957863] (September 8, 2011).

  Also, you can view the rest of GlennS blog for more information: -.

  http://glennschwartzbergs-Essbase-blog.blogspot.in/2011/12/smart-view-patch-to-patch.html

  I hope this helps.

  Kind regards
  -SM

  Edited by: 918547 March 1, 2013 09:37

• Ask Timedout error when sending data from planning thorugh Smart view

  Hello
  
  We receive Request Timed out error when trying to send data to the planning application by using Smart view.
  
  "Unable to connect to the provider because: the request has timed out." Contact your administrator to increase netRetryCount and netRetryInterval. "Is someone can you please tell me where I can increase the time-out settings? Can someone give me the link to the document that detailed the steps to do this.

  Go to the knowledge base and search for document ID 744559.1

  Cause
  By design, Internet Explorer imposes a time-out for the server limit return data. Internet Explorer does not indefinitely wait for the server to come back with data when the server has a problem.

  Smart View communicates via HTTP to which Internet Explorer DLLs are used. Smart Display users who run large queries or have a slow network connection might encounter the error, "the request has timed out. Contact the administrator to increase NetRetryCount and NetRetryInterval. »

  This error message may be misleading because this error also occurs if Internet timeout settings Explorer does not respond to large farms. By default, Internet Explorer has a value of KeepAliveTimeout to a minute and another factor limiting (ServerInfoTimeout) of two minutes.

  Solution
  Please see the following two Microsoft articles for more information:

  http://support.Microsoft.com/kb/813827
  http://support.Microsoft.com/kb/181050

  The following steps must be made with the help of your systems management group. It is recommended that a backup of the registry is performed before making any changes.

  On the client computer, add/update the following registry keys:

  1. open the registry, Start-> Run-> Regedit.

  2. Locate the following section:

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings].

  3. create the new DWORD key with decimal values:

  ReceiveTimeout = 480000

  KeepAliveTimeout = 180000

  ServerInfoTimeout = 180000

  In this example, the ReceiveTimeout setting is 8 minutes. KeepAliveTimeout and ServerInfoTimeout settings are 3 minutes. These values are set to demand longer running more.

  4 restart the machine for the new settings to take effect.

• Unable to get the list of Essbase servers in the office with Smart View 11.1.2.1

  Anyone tried connection shared in Smart View 11.1.2.1? I am able to connect to, but it doesn't show all the servers in the non editable drop-down list. I tried with Office 2003 sp3, Office 2007 and office 2010, but none of them works. Also, I tried to find the datasourse.xml file in LWS - aps in the console of shared services, but is not there. I tried the solution given on that link also, but the datasourse.xml file is not in place.
  http://timtows-Hyperion-blog.blogspot.com/2011/04/smart-view-private-connection-issue.html
  
  my environment.
  Win 2003 SP2 32-bit
  SQL 2005 on separate windows box
  E.M.P. 11.1.2.1
  Shared services
  Essbase Server
  Essbse Client
  Essbase Integration
  The provider services
  Essbase Studio
  
  All components above configured successfully.
  
  I connect to Essbase through the URL http:// < server >: 19000/workspace/SmartViewProviders. It shows the login window and allow me to get gold, but the drop-down list is empty. No server listed.
  Let me know what I'm missing.

  I found the problem and solved it...

  Cause:
  SmartView is unable to save properly with all other components.

  Solution:
  After the installation of a SmartView, run the Configuration utility and select Foundation-> Web Configuration record properly with all other components.