Essbase vertical clustreing

Similar Questions

• instances Essbase

  Hello

  I want to separate use of server applications essbase (seprate resources)... multiple install server on different vitrual essbase machines EMP Installer... should be setting up load balancing? These facilities would count as multiple instances of essbase?

  You can certainly have multiple instances vertically and horizontally clustered or cluster (adding instances does not mean that they must be clustered), with regard to the load balancing that it will work only in read-only mode to acquire the asset that is rarely done in my experience.

  See you soon

  John

• Essbase Cluster - how to restore any cluster

  Hello

  I have the following plan to make (let me know if there is an error in this scenario)

  Essbase itself should be active / passive clustering on the windows cluster.

  Installation:

  Node 1: Foundation Services, reporting and analysis, Essbase Admin Services, Essbase provider Services, Essbase Integration Services, Essbase Studio Server, Essbase

  Node 2: even

  The Foundation Services, Reporting and analysis, Essbase Admin Services, Essbase service provider could me clustered using Weblogic Admin Server

  So I have

  Node 1: Instance epmsystem1

  Node 2: Instance epmsystem2

  OSH has been configured on the two afters of nodes that vertical scale was over for the Java Web Applications.

  Essbase Integration Services and Essbase Studio Server are configured on each case separately.

  So I started to configure the Essbase Server on node 1 (Instance epmsystem1)

  After I have configures Essbase Server on node 2. With the error that I use epmsystem2 as instance name.

  After the necessary manual changes of opmn.xml and essbase.cfg I could manually start und stop essbase on both nodes.

  but because the deployment were the name of the different bodies and different windows service names I could not create a unique service name to go with the windows Failover Manager.

  When I start to try on node 2 configure a Cluster on the epmsystem1 (@node2) of the cluster instance Configuration of EMP tool seems to be "full" with 2 existing knots.

  (a) could 1 remove node2 (epmsystem2) of the Essbase Cluster configuration? How?

  (b) is it possible after remove it to configure epmsystem1@node2 for essbase clustering while epmsystem2@node2 (including foundation) are still here?

  Thanks for advice

  Kind regards

  Kai

  You can try to uninstall Essbase and it should remove the registry entries, if on 11.1.2.3 there is the option to delete the instance of full EMP without uninstalling.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Data export Essbase in RDMBS

  Hello
  
  I am trying to export data in RDBMS with Essbase Calc. but there is problem with formatting. I get the output in the columns of RDBMS. As 12 months as unique for each month column (I did the same thing to another application, it happens as expected. application application to happen?)
  
  Account, scenario, Version, entity, Jan, Feb,..., Dec
  
  
  I expect
  Account, scenario, version, entity, period
  1 xyz first 1 Jan
  VXA 2 first Feb 1
  
  Here's my Calc.
  
  SET DATAEXPORTOPTIONS
  {
  DataExportLevel Level0.
  WE DataExportDimHeader;
  WE DataExportRelationalFile;
  };
  FIX (& CurYr, "Local", "Budget");
  DATAEXPORT 'DSN' 'ESS' 'BUDEXP1' 'hypstg' 'hypstg ';
  ENDFIX;
  
  
  Kind regards
  PrakashV

  Essbase takes a dense dimension to use as the data columns. I don't know what are the rules of AutoPlaylist, but he could definitely change by database. In your case, is picking up 'period '.

  However, you can use the DATAEXPORTCOLHEADER option to specify an another dense dimension. It is not always not you quite what you want - unless one of the dimensions of your DIFFICULTY is dense and you can use it - but it gives you control. You could add a dense dimension with a single member and specify with DATAEXPORTCOLHEADER but it's not an ideal solution.

  Documentation (http://docs.oracle.com/cd/E26232_01/doc.11122/esb_tech_ref/set_dataexportoptions.html) deprecated DATAEXPORTCOLHEADER use with relational export, but Glenn reported that it works fine as well, with a value of test - Re: DATAEXPORT of RDBMS - column Sun accounts in time

  Furthermore, the documentation for DATAEXPORTCOLHEADER in general seems very confused. For example, it comes to the example in DATAEXPORTCOLHEADER to the 'Scenario' in Sample.Basic:

  Specifies scenario as the page header in the export file. The Scenario dimension contains three members: scenario, actual and Budget. All case data is indicated first, followed by all the data real, then all data of the Budget.

  First, is not a "header" scenario, at least not in the same way that the term is used in the report Scripts. Second, the declaration that the output will contain "all data scenario to be indicated first," followed by all the real data is dubious at best. Scenario data are shown in the first column of each row, followed by the actual data in the second column. Maybe it's just my cultural bias to read horizontally before vertically...

• PowerPoint for Mac bar vertical scrolling does not work in the Sierra

  I have downloaded Sierra, open a PowerPoint for Mac 2011 version 14.5.4 and immediately noticed that the vertical scroll with my mouse does not work. They're only going to 'up' (for example, slide 14, 13, 12, 11, 10) or will be stuck between 2 blades.

  I unplugged and replugged my mouse, turned PPT market twice and rebooted my MacBook. No change.

  I know it's early days and these are the pains of growth with the new OS, but I use PPTX constantly.

  Any tips are appreciated.

  Have the same problem. I don't know that this isn't a mouse problem because it happens when I use the touchpad as well.

• How can I change the text in the Messages to the vertical?

  How can I change the text in the Messages to the vertical?

  If you mean change the orientation, simply turn the phone. If this does not work, close Messages and then run again.

  To close the Messages, press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close.

  If it does not, the strength to restart the phone. No data is affected by this. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• vertical line on screen

  My Mac has a vertical line on my screen, up and down, about 1/3 left. The line is very small but clearly visible.

  Any solution? Thank you.

  Hello

  Might be a good time to run the Apple Hardware Test

• Vertical lines problem

  Hello guys,.

  I have a MacBook Pro 17' Early 2011 model. It shows on the screen 5 red vertical lines and a blue vertical line. When the screenshot was taken, it does not show one of these vertical lines there. I'm so not if it's software problem or hardware problem. Help, please.

  More than likely a graphic card problem/failure.

• iMac screen distorted with vertical bars

  The display is distorted with vertical bars, then turns to a white, blank screen, so it can not be started.

  Tried Safe Mode; Disk utility (first aid) and reset the NVRAM all to nothing does not.

  Any other suggestions would be appreciated.  Thank you.

  The same display abnormalities occur after the Safe Mode boot?

  You can run The Apple Hardware Test / Diagnosis of Apple , but each of its possible results will lead to the same result:

  • identify a defective hardware that only Apple will be able to fix,
  • "no problem found" despite the fact that something is obviously wrong.
  • or an inability to run diagnostic tests due to the problem that you are experiencing.

  In any case, you've done everything you can do, and you will need to have your Mac evaluated by Apple for repair: Contact - official Apple Support.

• MacBook Pro screen displays a blue screen with the vertical line

  Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.

  It would be useful that you mentioned EXACT model/year of your MBP and the current OSX.

  Ciao.

• Vertical lines in staircase at the start

  Hello

  Recently, my Early 2011 MacBook Pro 15 "showed vertical lines which were zig-zags in shape. Color was a little tinted air (barely) and the black vertical splitter bar, you see when you scan with four fingers between the offices appeared intermittently. Finally after 5 minutes it would go back to normal. This time that happened 2 or 3 times in a week, then didn't happen again for a few weeks. When she reappeared then, he remained longer and eventually repeated once again.

  Now, last time I checked, after having a Service authorised Apple centre run diagnostics (file system and hard drive checked OK, they said that "this problem is known to this particular age model") he was sitting on the bar of the progression for 2 hours Apple logo screen to halfway through the zig - zag lines before I turned off for good.

  The thing that bothers me is service technology said it is common for this computer at this age. What the likelihood is that he knows that for sure because all Early 2011 MacBook Pro's today are the same age and I can't imagine having experienced them this often enough to use as their diagnosis.

  Does anyone have experience or thoughts on this subject?

  I don't think it's common as tech service says, your MacBook Pro is somewhere something wrong.

• Is it possible to get the expression of quick filter above the list of messages in the vertical view?

  See the attached screenshot.

  I have a fairly big screen so I prefer to use the vertical display (with message pane appears to the right of the message list pane).

  I use quick filters / lot of research in the search for old messages. In doing so, my attention is focused on the message list pane, but to type an expression that I have to drag my focus on the far right of the screen, above the message pane. Logically, this area of the screen should be associated with the message, not the list of messages.

  If a simplistic solution can be available if I ask you if there is a way to customize the location of the elements in the quick filter bar, as I illustrated on the screenshot?

  But I think that the fundamental solution is to make the bar area of quick filter in the list pane message, instead of the current arrangement where it is part of the largest component that contains the message list pane and message pane.

  I welcome any advice on how to solve this problem, for me, or get it repaired for others to share.

  Ah, found the bugzilla database - was looking for link to support the site, but as I couldn't find one, I assumed that this channel has been used on the screen of the excessive defects in bugzilla.

  In any case, a quick search found me https://bugzilla.mozilla.org/show_bug.cgi?id=592248 - where someone complained the quick filter bar was too short in vertical view and this has been resolved by extending the bar on the top of the message pane.

  I guess that preference will depend on the size of the screen. I will take the question through bugzilla and can provide a patch to satisfy both sides, if I have time one of these days.

• Safari freezes for vertical scrolling

  OSX Safari 9.1.2 10.11.6. iMac is often planted so that pages web vertical scrolling (often on Facebook or Yahoo). Must restart to recover. Is there a way to clean cookie or other files that could contribute to this event?

  It is not a cookie issue, but rather an extension incompatible or third Safari causing plug-in Safari crashing.

  Troubleshooting help here > If Safari is slow, unresponsive, which closes unexpectedly or has other issues - Apple Support

• Vertical wide view and Classic view layouts does not not in Version 38.1.0

  I just downloaded V38.1.0 and am unable to see my messages in any of the schemas - seen vertical wide and Classic view. Can you please help?

  Thank you.

  Alan, I followed a statement previously mailed to a different problem, but it worked - basically, you have to restart Thunderbird with Options disabled. For this - to go to help restart with the Options disabled.

  If you then want to turn all your modules, once you have restarted Thunderbird (in safe mode), you can click on Add-ons. This will bring you in the Add-ons Manager. Then click Extensions - highlight each Extension you want to activate, by first clicking the button turn off, it will switch to Enable, and then you're good to go.

  I think that the new Add on the calendar is the culprit. I hope that this approach works, thanks for posting if it is not.

  Best wishes.

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V