WD MyBook 1 TB recognized, "working properly" shown on workstation, but do not show in Windows Explorer
I have a HP Elite running Windows 7 (SP1) Intel Quad and 8 GB of Ram. I connected a WD MyBook 1 TB drive that was connected to my dish system to record programs. I plugged in my system using both the USB and IEEE1394 ports with the same effect. He reconnizes the drive, says it works correctly and shows the drivers are up to date, but it does not appear in Windows Explorer. Reboots have no effect. Says it works, shows on the system in my computer, but not workee.
Tell you in Computor its devices listed under removable...?
Is it detected in managing disks and an assigned drive letter?
Tags: Windows
Similar Questions
-
Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.
What should I do next
Hello
- Are you referring to the NEC USB Floppy Driver?
- You try to format floppy disks?
- Was - this earlier work, if so, did the chnages on the computer before this problem?
If it worked, I suggest the following methods and check the status of the issue.
Method 1:
Open the hardware and devices troubleshooter.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Update a hardware driver that is not working properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
The NEC uf000x diskette device is showing to work correctly. However, it does not show in windows Explorer. I can't read any disks or even
format. What is my next step
Check Device Manager to see if it appears. You may need to install a driver for it. If so, you should be able to get from the NEC web site.
Good luck.
-
Windows 7
HARD disk: Samsung Spinpoint 250Make a right-click on the icon my computer
Select manage in the 'breath' menu
In manage, select disk management
from that, you can then complete implementation, partition and format the new hard drive.
-
Built in mic on my Aspire 5738ZG do not work properly when I use Skype. I'm on windows xp, 32 bit. I installed the drivers Audio Realtek Acer official website but the microphone is still very low. Other people have said that they hear me very bad when talking on Skype, for example. What can I do?
You must check the Panel realtek on Mic Boost.
I don't know what version you have, but you can find some practical information to search on youtube on "realtek mic boost.
-
Hello.I just purchased 14 elements and installed updates, version of Camera Raw is now 9.3.0 and should work with my Nikon D7200 but is not, help is needed!
Good to know that things started working well for you.
-
Original title: corruption of the probably the key ".htm" registry is damaged or missing
Suddenly, IncrediMail does not work properly. I click on the message and get nowhere. It seems that it is trying to go to IE and can not find the web page. I searched everywhere on the internet and saw where others had the same problem, but I can't find the fix. One person suggested it be referred to Microsoft as a "failed to open local html file with IE' problem." I guess maybe that's a problem with the registry, but do not know how to fix it.
I can not even do a system restore or reinstall the IncrediMail program.
For assistance please ask for help in the IncrediMail Forum
IncrediMail Support Portal:
http://www.IncrediMail.com/English/help/choose-your-version.aspxDirectly in contact with the IncrediMail support team, click here
Cordially,
-
I'm not very tech-savvy... like everything. So I have no idea what to do on this subject, but the problem is very irritating because my wireless just randomly stops working for a short period of time, and it happens quite often. Does anyone have any suggestions?
My computer told me to go to the website of Buffalo, but I had no idea what to do from there.Hi Chadbassett,
Thank you to contact the community Microsoft and we will be happy to help you with your concern.
According to the description provided, I understand that you are facing a problem connecting to the wireless network.
He would be grateful if you can answer this question in order to help you further.
1. have you made changes on the computer before this problem?
2. What is the brand and model of your computer?
I would suggest trying the following methods and check if it helps.
Method 1:
Run the windows network troubleshooter, and check if it helps.
Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7
Method 2:
I suggest you to download and install the latest drivers wireless in the factory.
Note: If the drive is not compatible with windows 7, I recommend you to install the driver software in compatibility mode and check if that helps.
Windows 7 Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
Make older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows
Reference:
Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows
We would be more than happy to help you if the steps above did not solve the problem.
-
Upgrade to vista SP2 and now a driver does not work properly, and my web cam does not work
What driver update I have to install after installing windows XP SP2. Can I install it from microsoft or the manufacturer of my computer, HP?
What driver update I have to install after installing windows XP SP2. Can I install it from microsoft or the manufacturer of my computer, HP?
Hey zanalder
If your webcam is integrated into a laptop hp you get all the drivers for hp
http://welcome.HP.com/country/us/en/support.html
If you have a desktop computer with a separate webcam go on webcam manufacturers website and look for the webcam software
Walter, the time zone traveller
-
I have dfx audio enhancer, won't work in 13.1 I paid for this I need to go back to 12 or 11. can not reach mfg
Hello, maybe it's a bug in the plugin flash adobes 11.3 - other users have also reported problems with the sound once the plugin has updated.
Please refer to the following entry in the FAQ on how to deal with this problem or report the problem with the details of your system from adobe.
http://forums.Adobe.com/message/4483563
https://BugBase.Adobe.com/index.cfm?event=bug & ID = 3210964
in the meantime, you can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.
-
On an iMac using 10.6.8 OS and Firefox 11, an account turns FF fine, but another account on the same machine does not work. FF appears to start... the control bar appears at the top of the screen and a light under the icon... but no window opens. By clicking on a link in an e-mail brings the same result.
OOOOPS! Standing in the shower this morning, I realized what the problem was. A nephew of visit showed my wife and I have a YouTube video and it shows on the big screen by dragging the FF window on television while connected to my wife's account. When we finished watching the video of the TV, we have moved from input to TV and never drag the window to the computer screen. Happy to announce everything now works as it should.
-
AirPlay expose works such as extended display but will not itunes library flow
On a MBP and can use my apple TV as office extended, but if I try to stream a video from my iTunes library I get an error message saying: the network connection has expired. That happen all the time and sometimes it works perfectly, sometimes may take 3 or 4 attempts to disseminate and sometimes it is not matter what I do (including Apple TV restarting, MBP etc.) it will not work. Even when it does not work, I can use the air game screen to show my desktop etc on the TV via Apple TV, and I can also just mirror my phone or my ipad at any time without any problem. All software are up to date on my MBP and Apple TV. Everything starts to get really annoying when trying to watch videos at home etc and not be able to. One is able to offer a solution?
Looks like you're using Airplay and trying to play iTunes content and watch via Airplay.
If so, you would be better using the part of the House and streaming videos like this. It uses the buffering and is less than half a load on your network.
Using Airplay does not tax these as your network and buffer.
Use home sharing to share content with other devices - Apple Support iTunes
-
LabVIEW program works on a single computer, but does not work on another.
We have a laptop running a custom data acquisition program that has been done with labview by an external company. It communicates via ethernet with a box full of material national instruments that is connected to some sensors. While it works fine on the laptop, try to install the software on other computers results in the following error message "year error occurred while trying to open the configuration file"C:\program files\ (program name) \data\ (name of our company) fieldpoint.iak. This error occurs whenever we try to open the settings page of test or run a test. I checked that directory and the file is actually there.
New computers (we tried several) always have difficulty connecting to hardware via ethernet, and if you look at the network activity in windows, you can see a whole bunch of packages sent but only a little if any course of reception. I wonder if there is a network configuration problem? I tried with the settings as much as I can find, but nothing helped.
The company that made the software does not meet the emails.
Any ideas would be greatly appreciated!
A thinking hand: the file you are trying to read is a FieldPoint config file. I don't know if the FieldPoint configuration file format changed with different versions of FieldPoint. You may not have the same version of FieldPoint installed?
-
First of all how can I copy and paste of LabView code for the forum? I just do ctrl + c and paste it into the section "insert code"? If so, I tried to do that and it didn't work, would it because I am using a trial version?
Come to the main point, I take medium-sized measurements of a multimeter. With the while loop measures in its own code snippet, it works but when I try to put it together with my original code I get this error:
Reference not found: (xBFFC0012) Impossible to extract data from user for the given resource name as there was no data in the name of the resource. Before you can read the data, you must write the data of the user by using the action to write data of this user data VI.
However, when I run with 'Performance to highlight', I get an error. Anyone know what could be the problem or how to fix?
Thank you
William
Hehe, now that I have started working on it. I have the problem that you have highlighted.
I changed my program leaving the VISA section find resource as a stand-alone section then made a structure for the part of the measure of the event.
-
My computer laptop monitor works, but does not have the windows desktop.
original title: my laptop monitor works, but the windows on desktop are not displayed. The desktop appear correctly in safe mode but not in normal mode. Any suggestions?
Running windows XP media center edition on an HP laptop. AMD Turion 64-bit dual core.
Hi Prohoss,
Follow the steps in this document to perform a System Restore. You will need to start safe mode to perform the steps.
Maybe you are looking for
-
Intermittent drop WiFi: WiFi has been declining since the upgrade to Win 10
Currently have recent windows 10 version 10586.11 running on the HP Pavilion DV6T-7000qe. Has wifi connectivity problems since then with the drops or slow internet. No other device having problems, just this laptop. Running sfc scannow and everything
-
Satellite Pro A300-28R: slow start and freeze on Internet Explorer
I recently bought a Satellite Pro A300-28R and I'm very disappointed with the performance.(1) from the card, it looks like a decent laptop, but with the start time of 3 minutes, 'Please wait' it's probably not impress me considering the fact that I h
-
I need driver of wi - lan for PC portable HP 15 - r033tx for win 7 64 bit.
I need the driver of wi - lan for HP 15 - r033tx Notebook PC for windows 7 64 bit. I checked on the list of drivers, but he's not here. Could you please help me...
-
delete a user account on Pavilion 20 all-in-one
My husband and I are the only people who use this computer and have created two user accounts and need only to have a. Need to know how to remove one of the users. I can see where he has the opportunity to add a user in the settings of pc and change
-
Cannot configure VWIC-2MFT-T1 on 1841
I checked and double-checked before you buy and this card is obviously taken in charge on the 1841 for 'data only mode' which is all that I need. I have 3 T1s multi-links mode and I want to use 2 of these cards (and 3 of the 4 ports) to support. Th