Vertical lines problem

Similar Questions

• Line problem vertical screen satellite 3000

  my laptop is Satellite 3000, it had vertical line problem now, I want to use an outdoor screen tube to replace the current damaged LED screen.

  I tried to use the swap FN + F5 key, but it's still doesn't work, I tried to log into the system to check, ((windows xp) system is normal), but I don't see anything because the screen is black, it will not be in the system even if I have in connected to the local network, because the configuration of mobile network function is forbidden to communicate with the internet , (I ghost before it has completely damaged), the question is:

  1, I have to configure something so she may use it outside the screen in windows XP? or just use the FN + F5 swap button?

  2, how am I going to do next step if I want to use the external screen?

  thx a lot

  Hello

  the first question you should ask is, if the machine works really well. This means that all THE drivers are installed and so on.
  The other thing is:
  When you connect the external monitor to your computer, you see something while turning on the machine? (Logo of Toshiba, Windows XP start screen, etc.).
  Usually, you should be able to work on an external display, and if all drivers and tools (such as FN + F5-> change device display tool) are installed, then the "display" button should be possible.

  Please answer and describe if you see something that we can do some better troubleshooting.

  Welcome them

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• Qosmio G30-137 - video card problem - the bug of vertical lines

  Hi members,

  Today my Qosmio G30-137 started to make trouble showing vertical lines that look like this:

  ''''' ''''''' '''''' '''''''
  '''' ''''''' '''''' '''''''

  After having used the product Windows disk recovery could not start early and came up with a blue screen with the error code:

  + failure of page in the nonpaged area STOP 0 x 00000050 (0xC09C3044, 0x00000000, 0X804DA90AA, 0 X 000000002) +.

  Basically, this indicates that the RAM - memory Cache L2 or preserved is dead. But I also learned that the graphics card can be smoked.

  After the blue screen, you will not get the system to normal operation, no matter what you try.

  I strongly advise to check if your Qosmio is under warranty and see your reseller for Exchange. Fortunately I bought mine 2006/06/06 so its still under warranty (even if only a left view days).

  Additional information: another Member of this forum has had a similar problem and noted that the entire motherboard must be changed causing costs of USD 700.00 and more!

  I will let you know what I found myself with.

  BRgds
  The Q

  Unfortunately, this sounds like a serious problem of material as other members suggested, the GPU (graphics card) may be defective and therefore replacement is necessary.

  The point is that the GPU is soldered on the motherboard and it of not possible to remove the graphics chip of the card. In most cases, the entire motherboard must be replaced to solve graphic problems.

  In my opinion, you should contact your ASP as soon as possible.
  Technicians should be able to help you to explain the situation and to issue and ask for later handling.

  Good luck buddy

• HP 2159 m monitor - problem is 'running ants' vertical lines about 1 mm interval during the video display.

  At the following problem troubleshooting steps:

  (1) monitor confirmed cable is properly attached to the monitor and CPU.

  (2) monitor reset to the default settings in the monitor menu.

  (3) installed the latest driver - HP 2159 m 2.0

  (4) installed the latest driver NVIDIA graphics - 285.62

  Described as "mobile dash", as vertical lines appear to be 1 pixel wide, several pixels long, black, separated by spaces of many pixels and move vertically (up/down) direction.  Lines are separated by 1 or 2 mm.  On rare occasions, the lines are horizontal rather than vertical.

  I see this effect during video playback.  Mobile dots are more pronounced with mid - grey tones.

  Rarely see a few stray clusters of white pixels on screen in any of the video areas.

  Would appreciate any suggestions to solve.

  Mrwrightrl,

  This problem has been successfully resolved by HP nearly 12 months ago.  There is nothing wrong with my monitor is.

  It's a graphics card from Nvidia to the wrong address.  I was satisfiled with my HP and support products.

• I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  Sorry to hear that, but the screen is bad and must be replaced!

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

  There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

  Hi gljatlaw,

  I see that you are having problems of quality of scan.  I'll take a look at the document below.

  Scan quality

  Let me know how it goes.

• U3014 Vertical lines/artifacts after standby sleep usng DVI - D cable. Work around this problem, use a DP cable.

  Hello

  I have a rev A01 U3014 that works perfectly until recently. Over the weekend, the display exposed vertical lines colored after recovery mode sleep. I cycled the power on the display and the problem disappeared. I thought it was an isolated incident and did not think much. The problem occurs for a few days. Today, the problem has occurred three times - twice taking the sleep and once when I restart. I'm fairly certain that this is not a problem of cable or the video card the problem when I disconnect the DVI - D cable. I have also updated and restored my video drivers, the problem is back, regardless of the version of the driver. I'll also try hooking up via DisplayPort to see if maybe the DVI port is the origin of the problem. If there is no other troubleshooting ideas I can try, please let me know. I have the screen connected to an EVGA GeForce GTX 770, running at the native resolution. Here is a picture of the problem. Yet once again, this ONLY happens when the sleep. I have not seen the problem spontaneously occurring under normal conditions of use. Here a link to the image.

  Just to update this thread - I went the DVI - D cable to a DisplayPort cable to the end of July and did not repeat it problem.  Thus, it seems that the problem was caused by a faulty cable.

• Vertical lines in staircase at the start

  Hello

  Recently, my Early 2011 MacBook Pro 15 "showed vertical lines which were zig-zags in shape. Color was a little tinted air (barely) and the black vertical splitter bar, you see when you scan with four fingers between the offices appeared intermittently. Finally after 5 minutes it would go back to normal. This time that happened 2 or 3 times in a week, then didn't happen again for a few weeks. When she reappeared then, he remained longer and eventually repeated once again.

  Now, last time I checked, after having a Service authorised Apple centre run diagnostics (file system and hard drive checked OK, they said that "this problem is known to this particular age model") he was sitting on the bar of the progression for 2 hours Apple logo screen to halfway through the zig - zag lines before I turned off for good.

  The thing that bothers me is service technology said it is common for this computer at this age. What the likelihood is that he knows that for sure because all Early 2011 MacBook Pro's today are the same age and I can't imagine having experienced them this often enough to use as their diagnosis.

  Does anyone have experience or thoughts on this subject?

  I don't think it's common as tech service says, your MacBook Pro is somewhere something wrong.

• Visual glitch (vertical lines after the first tab) with 33 FF

  Since Firefox 33.0, I have this glitch visual - a few random vertical lines that appear somewhere near first tab if only one tab is open. I tried different versions and it began with FF 33.0 and in all versions of 33. Now I test 34.0b7 FF and it seems that is not there. So I hope that its does not pop up when 34 goes stable.
  Here are a few screenshots:
  http://i.imgur.com/sdvMGi5.PNG
  http://i.imgur.com/Y19ABs2.PNG
  http://i.imgur.com/Yj8Sj7t.PNG
  To make believe that I have to open two tabs, and then close the other, and this is when it appears.
  These lines are blinking / moving according to the place where my mouse, for example, move the mouse over the address bar allows you to change.

  Hello

  What happens if you disable graphics hardware acceleration? You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  1. Click the menu button

     

     then select Options Preferences on Mac or Linux, or Windows.

  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Flashing of the vertical lines in the tab bar?

  There are small vertical lines in the tab bar. They appear after the closing of the tabs. They are flashing, then change places when I place the cursor on any Firefox buttons or bars. And sometimes, they are flashing and the text cursor in the address bar of mirror.

  Disable all modules and themes does not affect them.

  I'll try to add a screenshot of the problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Show the vertical lines of blue green on Tecra M

  I have a blue vertical lines on my laptop screen.
  They seem to be present when I have a white background (for example, a web page).

  The lines disappear when I move my mouse over the screen and reappear when the cursor moves. I have no lines on the video or pictures, just white painted.
  It's really annoying, please help.

  I use Win XP SP3.
  I have a Nvidia geforce 6600 128M video card.

  Hello

  Have you noticed the same problem on external monitor or TV?
  Check this box

  It s really strange that you it ONLY the lines that maybe that it melts s just a software problem, but usually these questions are related either to the screen or GPU malfunction of the

  So until you can consider contacting ASP in your country for a verification of the material I recommend get the laptop to factory settings and check if the behavior still persists...

• HP Pavilion Notebook 14-n271tx: a vertical line in the middle of my screen

  Hey there, I would like to know more about the vertical line in the middle of the screen of my laptop. There will be a white vertical line in the middle of my screen sometimes but when I adjust the position of my laptop, it disappears. Can I know why is it happening? Is it because of problems in the system or what? How can I solve this problem? What I send to HP customer Service to solve this problem?

  Hi @DustMidnight85

  Welcome to the HP Forums!

  This is a wonderful place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with the display, but if you change the position of the screen, it disappears.

  Here is a link to the display quality problems that can help.

  As you said it disappears when you reposition the screen, that the connection cable can become loose or damaged opening and closing the display.

  Here is a link to laptop HP Pavilion 14, HP Pavilion 14 Touchsmart laptop, HP Pavilion 14 Touchsmart Ultrabook, maintenance and Service of Guide. Chapter 4 page 36 has removal instructions that can help you check for this problem.

  If your laptop is under warranty or you wish to help please contact HP support for assistance.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Satellite Pro A10 - 3mm thickness vertical line on screen

  I have a thick vertical line of 3mm on the screen seems to come up in colors, it generally moved to gray.

  The display was damaged - or is this some sort of driver problem.

  Hello

  It looks like a hardware malfunction. UPS may be a FL. But I m not 100% sure.
  What you can do? Well, if it's really a hardware fault so the only way is to contact Toshiba service. But it could also be a strange software problem. In this case, the best way is to recover the operating system and/or update the graphics driver. You can also check your BIOS version. If there is a newer version, then try to upgrade the version of the BIOS.
  But if the material is broken, then contact ASP.

• I have pale green vertical lines on my iMac 27 "

  I have Pale on my iMac 27 "early 2009 when green vertical lines startup and after a minute or two, the screen becomes grey.  This means my Mac died?

  I tried to start both the recovery disk and my backup time machine, does not

  Hello Fernbergjim,

  I see that this problem is originally a drawback to the use of your iMac. This question most likely has something to do with the internal parts of your iMac. You may be able to make an Apple store to pay compensation in addition to the right of your country's consumption (depends on your country).

  This problem would be better fixed during the inspection by adopting it an Apple Store. If you have additional questions, do not hesitate to ask

  Best regards

  James