Estimating size of backup before running the RMAN

Similar Questions

• Configuring the listener pending side before running the RMAN DUPLICATE

  Version: 11.2.0.3
  Platfomrm: Solaris 10
  
  We will create a DB physical standby for our primary database using RMAN Duplicate.
  
  Our primary DB details

  DB_NAME          = ADPTGMS
  DB_UNIQUE_NAME     = ADPTGMS

  Names for standby

  DB_NAME          = ADPTGMS
  DB_UNIQUE_NAME     = ADPTGMSDG

  Question1.
  Next to the day before, before I run the duplicate RMAN, I need so that it starts the empty instance in NOMOUNT State. Right? Can I configure export ORACLE_SID DB_NAME or DB_UNIQUE_NAME?
  
  Question2.
  
  
  I understand that it is a precondition not to have the listener towards the top pending side make the RMAN Duplicate (otherwise how RMAN will connect to the dummy instance in the side standy)
  Next to Eve, there is no DB turns again. But for the RMAN to connect to the Instance of a model, I configured and started a listener as shown below. Is this really?
  

  $ cat listener.ora
  # listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
  # Generated by Oracle configuration tools.
  
  LISTENER_DG =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 10.80.16.179)(PORT = 1524 ))
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2012))
      )
    )
  $
  $
  $
  $ lsnrctl start LISTENER_DG
  
  LSNRCTL for Solaris: Version 11.2.0.3.0 - Production on 20-DEC-2012 00:14:19
  
  Copyright (c) 1991, 2011, Oracle.  All rights reserved.
  
  Starting /u01/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
  
  TNSLSNR for Solaris: Version 11.2.0.3.0 - Production
  System parameter file is /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
  Log messages written to /u01/app/oracle/diag/tnslsnr/tigris179/listener_dg/alert/log.xml
  Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.80.16.179)(PORT=1524)))
  Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2012)))
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.80.16.179)(PORT=1524)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER_DG
  Version                   TNSLSNR for Solaris: Version 11.2.0.3.0 - Production
  Start Date                20-DEC-2012 00:14:24
  Uptime                    0 days 0 hr. 0 min. 3 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
  Listener Log File         /u01/app/oracle/diag/tnslsnr/tigris179/listener_dg/alert/log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.80.16.179)(PORT=1524)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2012)))
  The listener supports no services
  The command completed successfully

  Hello

  The link I gave in my previous post features a display of very good example:

  Primary:

  Pfile/Spfile name: initprim.ora/spfileprim.ora
  db_name=prim
  db_unique_name=prim
  

  Standby time:

  Pfile/Spfile name: initstnd.ora/spfilestnd.ora
  db_name=prim
  db_unique_name=stnd
  

  In your case:

  While adding a static entry to the listener of the day before, SID_NAME should be the DB_UNIQUE_NAME of the database pending. Also the pfile/spfile Eve must be associated with the DB_UNIQUE_NAME of the previous day.

  The pending database ORACLE_SID would be the DB_UNIQUE_NAME of the database pending. Hope that's clear!

  Kind regards
  Shivananda

• Is there a way to know if the current modules are compatible with the latest upgrade of Firefox before running the update?

  I want to know if my Add-ons and current themes are compatible with the latest update of Firefox before running the update.

  Hello azdec.

  You can check the add page - we in addons.mozilla.org so it's just one or two. In my view, there is an extensions in the Gallery of modules that allows you to see if your modules are compatible with the newer versions of Firefox. But you'll have to look for them, because I don't know how it's called.

  I remind you that if you want an add-on to be compatible with a newer version of Firefox, you must contact its author.

  In addition, the version of Firefox you are using right now has been suspended and is no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to getfirefox.com.

• Initialization of the LEDs before running the second test.

  I am novice programmer Labview using LV 8.6.  I have an application where I have a lot of lights to indicate success or failure throughout my application in many different cases. After running these tests test that passed are indicated on the front panel with a light green. These failed tests are lit with a red LED. Is there an easy way to initialize all the LEDs return to their shutdown state before running the test a second time without reload the application?

  Here is a small example. First the Boolean values are changed to true, then they return to their fake. Does that help?

• A previous program installation was never completed. You must restart your computer to complete that installation before running the installation of Skype program. Setup will now close

  I get the following information on the screen.

  Skype information

  A previous program installation was never completed. You must restart your computer to complete that installation before running the installation of Skype program. Setup will now close

  Original title: installation of Skype in Windows 7 Professional

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the question on Skype.

  I will definitely help you with this.

  Please provide the information below.

  1. are you an error code?

  2. don't you make changes to the pc before that?

  I suggest you go through the links below:

  Refer to the suggestion given by John Rubdy replied on May 27, 2011:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/unable-to-install-Skype/c00745e0-39b1-49FA-b3b0-c6ed5feab9bf

  Also check out the link below:

  https://support.Skype.com/en/FAQ/FA11033/why-do-i-get-a-Windows-Installer-1618-error-code-when-i-install-Skype

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• How to run the rman output files, which are more days of retention

  I use for my rman backup tasks.

  I have format my output files of rman to a specific path, instead of the fast recovery area.

  Also, I spend below command in RMAN

  RMAN > CONFIGURE RETENTION POLICY to RECOVERY OF 7-DAY WINDOW;

  And the "control_file_record_keep_time" parameter is also set to 7.

  I've been running rman for 8 days. Everything seems good. But I find several rman output files are more than 7 days.

  So, I just want to know how to handle the rman output, which is longer than 7 days files?

  In fact, I assumed that these older files should be obsolete files, but rman is not to declare that they are obsolete.

  So how do now?

  user8710670 wrote:

  I use for my rman backup tasks.

  I have format my output files of rman to a specific path, instead of the fast recovery area.

  Also, I spend below command in RMAN

  RMAN > CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;

  And the "control_file_record_keep_time" parameter is also set to 7.

  I've been running rman for 8 days. Everything seems good. But I find several rman output files are more than 7 days.

  So, I just want to know how to handle the rman output, which is longer than 7 days files?

  In fact, I assumed that these older files should be obsolete files, but rman is not to declare that they are obsolete.

  So how do now?

  Windows 7 day average recovery rman will protect everything necessary for the recovery to any point in time in the last 7 days.  In fact, in the last 604800 seconds.  The same will mean that he need the files OLDER than that.  Simply because a backupset is older that your recovery window does NOT as yet, it is obsolete.  Any recovery begins with the last FULL or INCREMENTAL backup ZERO before the recovery point.  And it does not matter how old the backup is, it will be obsolete.  Suppose you take a level 0 backup, 1 January and for the rest of the year taking nothing but level 1 and backup archivelog.  31 December than and only the full backup will still not be obsolete, even though he is a year old.

  ============================================================================

  removal of the obsolescence of RMAN

  Day 1 - level 0

  Day 2 - level 1

  Day 3 - level 1

  Day 4 - level 1

  Day 5 - level 1

  Day 6 - level 1

  Day 7 - level 1

  Day 8 - level 0

  Day 9 - level 1

  Day 10 - level 1

  Day 11 - level 1

  Day 12 - level 1

  Day 13 - level 1

  Day 14 - level 1

  On day 14, your window of 7 days is up to date 7.  A recovery to date must begin by restoring the backup of level 0 of the day 1. So it may be outdated.  Some level 1 between 1 and 6 days backups might be obsolete, depending on if they are incremental or cumulative, and it also happens with archivelogs.

  If you have access to MOS, you can review the notes 462978.1 and 463875.1.

  ============================================================================

• How to find backups are running - if RMAN or EXPORT or EXPDP?

  I need to find using SQL backups are running at any given time. I want to use SQL to do this.

  Hello

  Check the V$ session view to get.

  SELECT SID,PROGRAM FROM V$SESSION
  

  The program will give you the

  In case of export it will give you - exp.exe under the PROGRAM
  In the case of expdp it will give you - expdp.exe under the PROGRAM
  If RMAN session it will give you-

         SID PROGRAM
  ---------- ----------------------------------------------------------------
         140 exp.exe
         158 expdp.exe
         138 rman.exe
         149 rman.exe
  

  Kind regards
  Delphine K

• LVDT offset before running the program

  Hi all

  I use an LVDT to measure the movement of the ground. This must take into account both the consolidation and swelling and therefore requires the LVDT to move in both directions. As a result, the voltage must be reset after the LVDT is pushed so that it can record both negative and positive direction. So far I managed to do it using a business structure that runs when the "zero" button is pressed. However, it comes into force once the program is run. What I need is a button "zero out" which can be used before the program is executed. I want so push in the lvdt, click on the "zero" button, then start running the program to avoid these initial tensions is recorded on the xy graph.

  I found a vi file that does this, but it was very complicated and used old version of labview. I'm relatively new to labview and therefore could not follow the coding on it.

  I've attached the vi file to make it easier to understand. Your help is greatly appreciated

  See you soon,.

  Gurung

  Two screen grabs show how I did the same 'Auto zéro' function when you use an LVDT to measure displacement, I was also saving strength at the same time then graphically representing the post record results.

  On the first race the true / false loop is set to TRUE, in this case the displacement is subtracted from zero to provide compensation, this offset value is then passed to the shift register where it remains as a constant for subsequent itterations of the main loop, while the value is simply passed straight through the true / false loop with nothing done to it on all iterations after the first.

  The offset value is then added to the data read from the LVDT to provide a number of displacement from zero since all that the program was headed all first. There is a 'Save' button on front of who's in a hurry to start and stop recording data - hope this is a help - Mike

• Using the Scheduler to run the rman script directly stored in the recovery catalog

  Hi everyone, I usually automate my backups rman, using either cron or dbms_scheduler to call my stored in a sh file NIX rman scripts.  Everything works fine but anyone know how / if it is possible to call a stored in the recovery catalog rman script. Let's say I have create a script in the catalog:

  RMAN > create script showall

  Comment "just one example of demonstration."

  {

  VIEW ALL;

  }

  Can I use dbms_scheduler to call this script directly? If Yes, how and if not then how can we plan for this or a stored script stored in the rman catalog catalog.  Been looking all over the place, but everything seems to indicate leaving Oracle to call .sh or .bat file.

  Kind regards

  Dave

  Well, let us know the result.

  The link you supplied refers to 12 c Scheduler improvements it seems, it may not be applicable to lower versions of Oracle.

• How to force the compilation released executable before running the distribution of LabWindows/CVI kit?

  I am new in 2015 of the CVI. I used CVI 7 and when I chose "Create the Kit of Distribution", when I was still in debug mode, Labwindows asked me to build the executable of setting before creating the Distribution Kit. This does not happen to CVI2015, and the Distribution Kit is created with the latest built executable version, although I made a few changes in my code! This is a problem since I work in debug mode and I usually forget to build the executable of liberation before calling the distribution kit, so I need CVI to do it automatically like CVI 7 did. I suppose that there is an option to do this, but I can't find. Can someone tell me please how to resolve this problem and force CVI to build the exe version before building the distribution kit? Thank you.

  Today, I've solved quite simply create a new distribution. The previous like unsing was automatically imported by CVI7 project. By creating a new distribution, now when I change something, CVI ask me if I want to build the release. So I did not understand the problem but I solved it by editing a new distribution kit.

• Data backup before updating the ICS!

  I know that the CSI to Live with Walkman is just around the corner (in India) so I thought completely on the way to save not just the apks but all app data data app for example. -I don't want to lose my progress in some games.

  So please help me to save my app data.

  as it was suggested above you cannot save data on applications, unless root you your phone and use titanium backup

• Create a backup before reinstalling the server VM

  Hello

  How to create a backup from a virtual machine on vmware server 2.0.2 on linux debian 6?

  I need to re - install the server, because of this I need the virtual machine on an external drive backup. How to do this? THX!

  Best regards, jan

  Take a look at the following article to find out how copy/move the virtual machine files: KB VMware: move or copy of the virtual disks in a VMware environment

  Basically we need to stop the virtual machine, remove all snapshot and copy/move the files of virtual machine (or the whole folder) to the new destination.

• Warn before running the script action?

  I have a script that deletes unused character styles.

  When they the script is run, I want a dialog box to view and ask the user if he wants to... If so, the rest of the script will run. If not, the script stops.

  I can't find other instances of the present. Any help would be appreciated. Thank you.

  function removeUnusedCharStyle (myChStyle) {}

  app.findTextPreferences = NothingEnum.nothing;

  app.changeTextPreferences = NothingEnum.nothing;

  app.findTextPreferences.appliedCharacterStyle = myChStyle;

  var myFoundStyles = myDoc.findText ();

  If (myFoundStyles == 0) {}

  myChStyle.remove ();

  }

  app.findTextPreferences = NothingEnum.nothing;

  app.changeTextPreferences = NothingEnum.nothing;

  }

  Wow, sorry to waste your time. I not able to find the answer in the forums and started to look elsewhere. Very easy, it turns out that. Thank you very much.

  If (confirm ("would you...?")) {

  }

• Jornalised data County check before running the interface

  I have 3 source and target 3 table and there are 3 interfaces for loading data from a source to the respective target. All interfaces are packed in a package. I created journalising on table 3 source and interfaces are load only log data. Now, I want to implement a strategy in the folder which must first check the log on the table of the source data before execution of the respective interface. If the number is 0, then it will not work this interface. The advantage to implement it will be time to load. Is it possible in ODI? Waiting for a quick response.
  
  Thanks in advance,
  
  Sugata

  This is what the ODIWaitForLogData tool. With this tool, you can assign timeout error or not and tell him how many lines to wait. Exactly what the tool was designed for.