ESX 3i U4-153875 and AMD Phenom 9650 - moved

Similar Questions

• Hardware Diag tool-AMD Phenom 9650 PCI 1394 Bus Reset test don't NO WHAT to DO?

  Hi all

  IM new to this forum and I am here because I ran into a problem with my HP diagnosis are.  I have a HP Pavilion Elite m9402f I bought about 3-4 years ago.  Recently, my hardware diagnostic tool was omitting the

  Bus PCI 1394 reset the Test

  AMD Quad Core Phenom 9650 Pro MB152-F1

  Can someone tell me if it is a common problem, and if there is a simple solution.  If its an error with the diagnostic software possible or if I am looking at a major hardware problem.  Whatever it is, I want to fix this ASAP.

  Any input would be great!

  Thanks for your time

  Jen

  The processor have a test as well?  The reason why I ask is Reset of Bus PCI 1394 test is separate from the processor and belongs to the motherboard subcategory.

  1394 is usually a firewire port.  The system has a firewire port?

  According to the following picture, #4 is the firewire port.

  

  Based on the results of the test, the FireWire has failed (or train to fail).  If it is something that you do not use, then I'd be too concerned about it.  The only solution that I know would be to replace the motherboard in his together which may be more it would be interesting if the port is not used.

  If the BIOS has the ability to disable (some systems, some do not), then you can disable the port all together and he can jump the device as BIOS should report it as disabled.  I note that most of the systems do not have this option.

  Let me know if that answers your question.

• AMD Athlon X 2 64 5800 + and AMD Phenom 940 quad not Core than a single core shows on Vista

  I am running MS Windows Vista Edition home premium on a motherboard ASUS M3A78-CM very w / AMD Phenom II x 4 940 3.0 Ghz 6 MB Quad Core, 2 GB of RAM.  It is an upgrade to an AMD Athlon 64 X 2 5800 + 3.0 Ghz.  The two see the single core cpu in the Task Manager, cpuz, msconfig, etc..  However, the BIOS displays 1 physical cpu w / 4 logical processors.  In addition, the reason for which I have not even noticed the problem, is that I play a resource intensive game called Crysis Wars and my fps SUCK.  This led me to the problem.  Wars started, the console displays only a single core as well during the detection of the spu.  I need to know if the game software is read directly from the hardware OR of Vista.

  I have tried everything to fix the problem, including the use of msconfig to clear the number of processors, select detect HAL, reboot, etc.  Did not work.  I suspect that this is a license live upward, from Microsoft, but will not know until I have install another OS to test.  My next move (when I can afford it) is to install XP or Linux to see if these operating systems can detect all four cores.  If it works then I know it's the fault of Vista.

  Anyway, any help would be appreciated as my frustration level is through the roof with it.  Thank you.

  Try updating the BIOS with the latest version: 2801 BIOS M3A78-CM.  This can easily be performed using ASUS Update V7.16.01 for Windows XP / XP 64-bit/Vista/Vista 64-bit. Carey Frisch

• ESXi 4 with AMD phenom x 3 720 and M3A78-EM motherboard (minor problem)

  Hello

  I'm quite new in the world of vmware. I have successfully used this combo whitebox for about 6 months. In order to have a successful install, I had to update my bios to ver 2003 and use pcie nic cards intel. After a successful installation, I looked inside the host, and he acknowledged the CPU X 3 720 with all 3 CPU cores. It also allowed me to assign all 3 hearts to a box of windows media 7 I have set up as an image on the host computer. The question and the problem I have is: in the new windows 7 x 64 image, it does not show 3-wire, it shows only 2 hearts. Detailed information inside the say that Windows 7 is an AMD phenom X 3 2.81Gz processor with 2 processors, not 3. In the Task Manager, the window of cpu usage shows only 2 windows instead of 3.

  Two processors are much for this image will do, but it would be nice to use all 3 CPUs, if possible.

  No matter what I try, I can't get windows 7 to recognize all 3 hearts. Even after I try all the stuff online, including the re - install, it's not even a hint of success.

  I have concluded that the vmware bios used for images, does not correctly recognize the CPU with 3 hearts. Am I correct in my assumption?

  Thank you

  Seems that I was mistaken with the number of vCPU that you can assign to a Windows 7 VM.

  However, the vCPU is presented as the virtual machine CPU sockets and Windows 7 only supports 2 physical CPU (Starter and Home 1 only). This looks so much like Windows ignores the third CPU. View the comparison to compare features of Windows 7. Search for "physical processor Support.

  If you have a licensed version of ESX (i) you could try the currently unsupported feature to assign the vCPU 3 as a multi-core CPU.

  See licenses processor for your application by

  André

• I have a HP G5210UK and I was wondering if an AMD Phenom II X 4 945 work

  I currently have a HP G5210UK and there a motherboard M2N68-(Narra6), so I was wondering if an AMD Phenom II X 4 945 would work.
  
  I also wonder if Corsair XMS3 CMX4GX3M2A1600C9 4 GB (2 x 2 GB) DDR3 SDRAM would work.

  Li4m53, welcome to the forum.

  According to HP, the CPU should be fine.  See the section called "Information processor upgrade".

  Any standard ATX power supply unit (PSU) should work correctly in the computer.  I always suggest measuring the PSU existing and comparing measures to one that is chosen.  This ensures you that there is no problem.  I have like Corsair or OCZ PSU.

  This is recommended by Memory Crucial for computer memory.  Crucial makes good reasonable price of memory.  Recommended memory is guaranteed to work or they will replace it no extra cost for you.  You will only be able to use 4 GB of memory, as the computer came with Win7 32 bit.

  Note: See the "memory" upgrade information here.

  If your problem is solved, please click "accept as a Solution.

• AMD Phenom II X 6 1055 t. and VM Workstation, it'll work?

  Hello!

  IM planning to buy a new desktop computer. AMD Phenom II X 6 1055 t. and VM Workstation works well? All experience is appreciated. I use Win 7 x 64 as my operating system.

  I will use maybe 2 ESXi.

  Concerning

  H

  Workstation VM 7 works very well with the processor AMD X 6 chips. I built two of them.

• AMD Phenom and CS6/Lightroom 4

  System requirements says I need a processor AMD Athlon for CS6. Can I use an AMD Phenom?

  Yes. Here are the minimum requirements. New processors supercargo them easily.

  Mylenium

• AMD Phenom II x 6 processor?

  Hello

  While ordering a new desktop machine.

  For a year or two we will probably move our servers to ESXi I thought I would try to install on my new desktop computer and run my 'pc' in a virtual machine, then I can familiarize yourself with the product. I also run a couple of virtual servers to try stuff on this machine.

  The pc, I thought I would use a processor "AMD Phenom II X 6 1090 t." (good price over the year with 6 cores), but I don't know if it will work with ESX.

  Anyone know?

  Or is it a bad idea to use ESX on office?

  Thank you, Bryce.

  Thank you Anton - that's right!

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• HP 6005-t: AMD Phenom II X 6 1090 t. Black Edition in a HP 6005-T motherboard?

  This model is the full size PC 6005-T and I'd like to put my amd ahtlon x 6 1090 t. inside. I know that there could be a problem if it does not FIT because of 938 pines against 939 so I'd be careful to see that he does and maybe a power issue 95w (?) but I was wondering if anyone could tell me if a x 6 can work since x4s make as much. This is the AMD Phenom II X 6 1090 t. Black Edition (3.2 GHz) that uses 104 vs 92 watts idle (?) according to some website. Apparently, it's 125 watt TDP.

  Thank you.

  AMD Black Edition CPU are generally not supported by motherboards with AMD platforms desktop PC. BIOS support just isn't there.

  The same thing applies when someone plans to use a processor Intel Extreme CPU for a desktop with an Intel platform.

  Support the card mother socket AM3 CPU, but not all.

  See the list of compatible processors from AMD for motherboard of your desktop in the following HP Web document.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01864939

• HP Pavilion p7-1003w: the upgrade of processor p7-1003w Six-Core AM3 AMD Phenom II X 6 10xxT error

  I am trying to upgrade my desktop computer the original PCU to a processor of Six Core AMD Phenom II X 6 1055 t. When I installed it the computer started with 'unsupported CPU error.

  The specifications for the p7-1003w on the HP site claims that the AMD Phenom II X 6 is System1. Help please. And thank you

  Cluddeni50, welcome to the forum.

  Here are taken processors supported:

  Max TDP: 95W

• Is my computer compatible with amd phenom II

  I have an old HP PAVILION a1600n PC and I wanted to know which amd phenom II x 4 processor can I insert? I am running windows 7, with DDR2 memory inserted. my current processor is an amd athlon 64 X 2 dual core 3800 +.

  Hello

  The following link is for the motherboard on your machine. It displays the CPU and RAM info:

  http://support.HP.com/us-en/document/c00757531

  I hope this helps.

• Upgrade my CPU AMD Phenom II x 4 910 to a Phenom II x 4 980 on a H-RS880-Μatx (Aloe)

  I have a HP Pavillion e9220y which I would like to make a few CPU and GPU upgrade.

  I did some research and saw that the current processor (AMD Phenom II x 4 910 (2.6 ghz)) can be upgraded to the AMD Phenom II x 4 980 (3.7 ghz) cpu.  I also intend on the old graphics card (Radeon HD 4350) in switching to a Radeon 7850.

  I tried to see if I needed to update my bios before install the new processor and I couldn't find a suggestion in the section Support & drivers specific to the HP Web site for my model computer.  The HP site says that he would suggest somehow if an update was available.

  Do you think I can just proceed with the switch of CPU (and the radiator and the stages of thermal paste of course) without flashing new bios?

  The old Bios simply would work with the new processor (faster processing speed)?

  The current Bios on my system is ' American Megatrends, Inc. 5.04, 10/01/2009 "and SMBIOS version 2.6

  Thanks for all the help you can give me,

  Jeff

  Hello

  I can't see any upgrade. As mentioned in the specifications, he takes care of the day 1. In addition, the following link is FYI:

  http://h30434.www3.HP.com/T5/other-desktop-PC-questions/BIOS-update/TD-p/1087865

  Kind regards.

• A HP Compaq dc5750 SFF PC can be upgraded to support a 3.4 ghz amd phenom II x 2 565?

  I have a laptop compaq dc5750 SFF. bought about 2 years ago. It has an AMD ATHLON processor. I want to update for AMD PHENOM II X 2 565 3.4 ghz processor. my PC motherboard can support the it? If this isn't the case, then please recommend changes.

  Thank you

  Pratik b.

  No, it cannot support the Phenom II processors and it will work without any mods that will do it.

  Frank

• Compaq presario cq5500f: Cpu - amd phenom x 4 quad core 9950

  Hello

  I recently bought the quadruple-heart phenom x 4 125w 9950 and wanted to update my one heart amd sempron 140.

  I bought with the intention to upgrade my compaq presario cq5500f so that I can use it as a gaming pc.

  However, when I put the cpu in the pc it says no "supported installed Cpu" and then it stops automatically after.

  Is this a driver problem? Is this a bios problem? Is this a problem of design of thermal power?

  Thanks in advance for your help.

  Here IS THE page of the motherboard and the choice of the CPU.  He says that the CPU should be TDP: 95W processor said is the AMD Phenom X 4 9950, which is a 125W CPU.  I suspect that's the reason why the BIOS claims not supported CPU.  OEM motherboards are picky about the card like that.

• Device Manager cannot recognize Installed AMD Phenom II X 4 955

  Hello

  I have HP Pavilion a6560a Desktop and had 9850 AMD processor running Windows 7 Professional with SYSTEM 7.1 rating. I installed AMD Phenom II X 4 955 CPU but or the windows Device Manager recognize my CPU as 955, it reads with 803 Mhz AMD processor as being unknown and the System CPU rating is down from 7.1 to 3.7. Could you please guide me what should I do for the motherboard to recognize the new AMD 955 processor?

  However Windows 7 is loading and the system works very well. but the system side is low and Manager device and POST do not recognize that the new installed CPU.

  Thank you

  Concerning

  "Is there a way I can update the firmware for this CPU? No, unless you can find someone to change the BIOS, as HP has not.    Perhaps you could make friends with guys to BIOS Mods to ask a mod firmware for the BIOS.