ESX host is listed in DVSwitch, but not in DVportgroups
Hello
I have the following in a CLuster (5.5 Vcenter, ESXi hosts 5.1) problem:
I added a new ESX to the cluster (number 9 of ESX), then added 4 network cards to the DVSwitch (uses the LACP Protocol).
In this DVSwitch I 2 DVportGroups / tag VLAN
The problem is the host is listed in the tab "Hosts" in VCenter to level DVSwicth, but do not appear in the DVportgroups tabs (all hosts are listed here but not the last one..)
vmk0 migrated successfully to the VLAN 1 St... but now, it appears limited to ""... I can migrate to the DVportGroup right... and VCenter says 'ok'... but nothing changes...
I tried to migrate a virtual machine on the ESX (2nd VLAN) = > VM pings OK...
So "technically" it works very well... but the ESX does NOT appear as members of DVportGroup.
The problem appeared when I tried to deploy a vApp (antivirus) on the ESX... I'm stuck at the "select VLANS for the NETWORK card"... There is no VIRTUAL LAN in the list... (because the ESX host is no not part of any dvportgroup..)
I tried "adding the ESX to the DVportGroup" after having asked for credentials, VCenter says 'ESX is already part of the pole '...
Someone had this strange behavior?
What can I do?
Help!
Best regards
S
I had a similar case, where the hosts have been posted under DVS, but not under DVS exchanges.
A restart of vCenter Service fixed the problem. However, I was not deploy any TIME or such.
Suhas
Tags: VMware
Similar Questions
-
Unknown contact appeared on t. o. list of contacts, but not on my list of regular contacts - I can't delete
original title: unknown contact on list o. t.Thanks for visiting the site of the community of Microsoft Windows. The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
http://windowslivehelp.com/forums.aspx?ProductID=1 -
help help... ESX host shows that only ANSWERS DO NOT
Hello
I have the ESX host, who said State says "NOT RESPONDING" status virtual Center, but the host's who responded and I am able to connect to the console using PuTTY... Can someone help me what could be the problem to show the status as no ANSWERS DO NOT... I do not see that error correct logs in the logs events and... The virtual machine that is hosted on the ESX host also works very well and im able to RDP to it with all the problems but in VM, it shows as disconnected...
ASK YOU TO HELP ME QUICKLY BECAUSE IT IS IN THE PRODUCTION...
Hey Shashi,
If the ESX host is unresponsive defeated VC if you can connect to the host ESX via VI Client, if yes, then the service pass works very well and you need to troubleshoot the service virtual Center on the esx host agent. You many consider them raise all initially with order # service vmware-vpxa restart
If you are unable to connect to the ESX host using VI Client, restart the service spend using service # mgmt - vmware restart and check the logs # tail f /var/log/vmware/hostd.log check for errors/progress.
Also look at kb.vmware.com for that matter and you'll find some articles that may help you solve problems.
All the best
If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.
-
Removal of the topics in the list of topics but not project
I would like to delete a few topics of my topic list but not my project. I don't know how I go about it. Links to other topics that can be removed? I don't want to not all references to the deleted subjects remaining in the project. I could not really nothing found in the forum discuss this in particular.Try this. Create a label called conditional construction OBSOLETE. Attach to any topic that you don't want to (permanently or at least for the moment) in your results compiled or generated. While you compile or build the project, be sure to exclude OBSOLETE headings in your statement of construction.
I also move all my OBSOLETE subjects in a folder of the same name in the project. They are still there, can be returned to service if necessary, but they are out of the way.
HTH!
-
I have Dreamweaver CS3 on Windows 10 64-bit.
For reasons I don't know, I suddenly find I can put files from Dreamweaver on my site (remote) and make them appear in the list of files in the "remote site", but then not appear in the browser. If the changes to the file seem in fact but somehow do not receive changes to the browser.
Grateful for any ideas on what could be the cause.
Thank you.
Assuming that you have enough free space on your server.
Maybe your host is caching the pages to their end.
Give him a couple of hours. If it does not sort arise, call your hosting provider and ask them what is happening.
Nancy O.
-
Headset BT in Airplay-list with Siri, but not the music
Hello
I use the iPhone6 with the last OS (iOS 9.3.4) and a BT headset that I usually use for calls.
I want to use this helmet also to listen to the music, so I intend to select the headset from the device list AirPlay during execution of Spotify or any other music player. But the device is not on this list can't.
When I start a call or Siri, the device appears and when selected.
List of airPlay when I start Siri or a call or a voice message:
* iPhone
* iPhone speaker
* Savi 7xx (this is my Bluetooth headset)
Mailing list when using for example Spotify:
* iPhone
When you start voice mail while the music plays player I can even hear the music, so, technically, everything seems to be in order.
Is it possible to force the Savi 7xx on always and not only for the Siri AirPlay devices list, call and so on?
Kind regards
Lutz
Hi Lutz
The manufacturer's instructions for listening to streaming music / media via headphones Savi 7xx (IE for 700 series models) are:
- Check that your phone is paired to the base of Savi.
- Start playing media by application on your phone.
- If you are wearing the headset, press the mobile button base to read audio data on the helmet.
- If the media does not start to play, "Savi 7xx" is selected in the list of Bluetooth devices.
- To stop media playback, press again the button of the mobile base.
More information:
-
When the apps in list of the AAM are listed as updated, but not installed.
When you view the list of apps in the AAM programs PS, IA & ID are listed as being up to date, but I don't have a thr CS6 installed versions. Can you inform me on how to get the latest version installed?
Run the Creative Suite cleanup tool and let the AAM to install programs.
Mylenium
-
Microsoft Frontpage 2002 SP3 is compatible with Windows 7? I intend to upgrade to Windows 7 from Windows Vista, but my most important request and the need is to maintain my web page that was created and is managed by Frontpage 2002.
This is the Forum for Windows Update .
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 Hardware/Software Compatibility Center.
For any other question of Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
All Windows 7 issues (other than Windows 7 update issues) should be directed to the it.
See you soon. Mick Murphy - Microsoft partner
-
Gamepad listed in "Devices", but NOT in the game 'controllers '.
I am trying to install an old joystick Saitek USB X 36. After hanging, it is listed as a "HID-compliant game controller" under the heading devices "devices and printers". However, when I go to the "Game controllers" window, there are has no devices listed. By clicking on "Advanced" button me give it a choice of 'none' or 'none '.
Is it possible to force Win 7 to recognize the device in both places?
Thanks in advance.
-mike
Hi Mike,.
I'm sorry for the late reply.
Since the joystick Saitek USB X 36 worked fine with Windows XP, there is a problem with 36 joystick Saitek X USB drivers. I suggest to try the joystick Saitek X 36 USB in Windows 7 different machine and check if it works very well. You can also install the drivers for USB Saitek X 36 joystick in compatibility mode for Windows XP and check.
See the steps to install a driver in compatibility mode:
a. right click on the driver file and select Properties
b. Select the Compatibility tab
c. place a check next to run this program in compatibility mode and select the operating system in the drop-down list
d. let the driver to install, and then check the functionality.
Let us know the status of the issue.
-
Hello
We have recently implemented Foglight and VMware plugin. As part of the VMware plugin, Foglight pulls in all the Linux VM machines including the ESX host. Our team of Linux only manages the running redhat Linux hosts. They fail the ESX VM guest. That said, is there a way to create a view that shows only the hosts running redhat Linux?
For example the view of rail infrastructure below contains 88 Linux machines, but nearly half of them are ESX hosts for our Linux team would not see all these. Is it possible to filter these?
Any help is appreciated.
Thank you
Tony
The easiest way would be to create a personalized, pair it with Infrastructure and then create a dynamic management component. This will help create you a rule for "All hosts" where you can find just the hosts that are not of the ESX host and run Linux.
The query would be:
detail.topologyTypeName! = "VMWESXServer" & os.longName like «% Linux»
-
Effects of the change of name of ESX host windows vcenter server sits
I made a change to an ESX host name and now I can not connect to the windows server vcenter is sitting on. The vcenter sitting Windows VM on the ESX. Now, I can not ping or you connect to the windows server. I tried to change the hostname to return but still cannot ping the virtual Windows machine, impossible to connect with the client of the infrastructure, cannot RDP to windows VM, etc.. Is there a way to fix what broke? Thanks for the help.
Have you tried to connect directly to the host ESX (with the vSphere Client) and change the configuration of the virtual machine and the host vCenter? How about using worms forward in DNS to get the new name to resolve the old names of servers? In this way, either name can be used to communicate with the same boxes/VM... I've done it before to other servers (not the virtual computer at the time) when we installed a new server to replace an older and got a name change (to follow the company standards). We had agents in place who wanted the old name of the server, in order to make adjustments in the system DNS has allowed these agents to connect to the new server and facilitated by the migration.
In general, I leave the host names and only once built server names vCenter. The best time to change is when you install the fresh software/OS, not at a time later than in fact. It is a good policy to have all areas...
VMware VCP4
Review the allocation of points for "useful" or "right" answers.
-
I'm trying to get a list of the virtual machines running on an ESX host specific, but also are located in a specific folder.
I think it must be something like that below, but for now without success:
Get-vmhost $esx_hostname | Get-vm-location (get-record $folder_name( )giving the error message: Get - VM: the input object cannot be bound to all the settings for the command EIThim becausethe command does not pipeline or entry and its own input stakeholders do not match any parameters that accept entries of pipeline of.Any thoughts?Thank you!EricVMHost and folder use the Get-VM-setting position. You must select either using the Where-Object cmdlet filter. For example:
Get-VMHost $esx_hostname | Get-VM | Where-Object {$_.Folder.Name -eq $folder_name}
-
Hello
now, I have a problem.
a customer has 3 blade IBM HS23.
because in the course of the last 7 months I had 4 times the host esx became offline / insensitive
all the vm continue to operate therefore continues to operate production
ESX host do not react on SSH connection or telnet
I can connect after pressing F2 and F12, but then the host everything crashes
I can't connect to the vi to the ESX host client either.
all hosts are installed on the IBM's USB drive
the only thing to solve it is to off the blades and start again
also random sound. I had 3 months running good, good running 1 day and 3 weeks running good
the vpxd.log file displays only the waiting times to communicate with the esx host and then the error offline
already updated all my firmware (chasis, blades, storage, fiber brocade and IBM switches)
I started with vsphere 5.5 u1 U1 and ESXI 5.5 IBM. already updates on vsphere 5.5 U2 and 5.5 ESXi vmware u2 (since ibm doesn't have an ESXi custom 5.5 u2)
im stuck... lil last event is on 16/01/2015 (and ibm will not support since there only subscription for 3 years and no software support contract)
one last point, I'm under bacup veeam and 7.x replication but don't see a problem there.
Thanks in advance.
I found the problem
I've restarted only iSCSI data store and all ESXi hosts becomes sensitive
so, after searching for the qnap forum I noticed that they have released an update on 29/01/2015
test of the firmware now and see what happens
If this fails, I guess the qnap ts - 469L is not taken in charge more for vsphere 5.5
Thank you all for the suggestions
-
update of esx host, use do not update manager
Hello
We have some for security reason esx host we are do not allow to connect to the internet and Update Manager is no/prob can't be installed (security), so I need to download and install the patches manually.
I need to apply the following patch, but at the bottom of the KB, I get
To apply patches to ESXi host is via the VMware Update Manager. For more information, see installation and administration of VMware vSphere Update Manager.
What is the typical whatsoever? is this one?
the hosts are 5.1
see you soon
You can download the patches and copy it into the data store and apply it using ESXCLI
Check the items below it will work by
-
I have problems to find a way to get a list of virtual machines on an ESX host specific and then he dumped to a .csv in the following format
I use the get-vmhost esxhostname | Get - vm
but everyhting else after, it is where I am lost... I think the closest I had been posting the output with a goofy header and format 'vm1, vm2, vm3 "...
name
computer 1 name
computer 2 name
name of the machine 3
to use for later use. Any help would be appreciated.
You must use the Select-Object cmdlet to specify more precisely the properties you want.
The Export-Csv doesn't know how to manage the virtual computer object.
Something like that
Get-vmhost esxhostname | Get - vm | Select name. Export Csv.\report.csv - NoTypeInformation - UseCulture
Maybe you are looking for
-
Re: How can I add a second internal hard drive to a Satellite Pro P200?
I have a Satellite Pro P200 with a single internal hard drive. There is a second Bay in the computer of another internal hard drive, but I couldn't find any information about it. There is enough space for a 2.5 "SATA but I do not see a connector. I c
-
I just reinstalled XP pro and I can't get the updates from the windows update web site. Whats up with this please help
-
Dell optiplex 755 does not connect to monitor
I turn on my OptiPlex and I have vga connected to the screen and everything but it appears on the monitor, is not the screen because I tried to use it on my dell OptiPlex 745 but I have this thing blue screen and I can't use it. Can someone help me p
-
Apply the patches in ISE 1.2.0.899
I am running ISE 1.2.0.899 Patch level 2. I want to patch level 6. I understand that the ptaches are supposed to be cumulative and incremental... but I want to assure you that I am 4 levels behind... Is there something special I need to do? I just ap
-
Scanning and repair (f :)) 100% compleat - frozen screen)
A few days at a cold start I get the message ' analysis and repair drive (f :)) 100% full) ' the circle of treatment still works, but I never have to connect, just stuck! I don't have a power of strength off the coast, then restart. This last time I