ESX3.5 restore and update "dish"

Similar Questions

• error 53 on I phone6, I can't restore and update to ios 9.1, there by icloud, but it does not work

  I can't restore and update ios9.1 53 on iphone error 6, I try by icloud, but it does not work

  the screen on the myphone was raplaced, how can I restore phone

• Restore and update Windows

  When you use the windows restore and restore your PC to an earlier date... Windows Update (I put to download, but let me decide what updates to install) offer again updates have been installed after the date of your restore point.  You can see these updates in Windows Hostory.

  Are these updates of window offered because they are installed is no longer even if they appear in the story and you have to click on install, or, they are still installed, even if her restoration before be offered and not deleted when restoring to an earlier date... and you select install you are simply overwrite the same update?

  The view update history list may differ from the list of installed updates. When you do a system restore in Windows 7, updates that have been kidnapped by a specific restore point still appear in the history view update but do not appear in the installed updates. It will be offered by Windows Update and then appears twice as successfully installed and show different installation dates.
  The list displayed when you click on the link to view update history in a file named DataStore.edb.
  This file can become very large, but can be removed if one chooses to do.
  My system 7 it shows currently beyond 25 MB and my XP system it shows more than 50 MB. As you have discovered, it is not always accurate as to what updates are installed.

  As an experience, that I moved to trash, did a scan for updates, and a new was created. Since no new updates have been detected, downloaded, or installed, when I clicked on the link to the history of update of view he said that updates had never been installed. The list of installed updates begged differ and showed all the updates installed.
  Then I did a system restore, a copy of DataStore.edb has been restored to its original location, but the view update history list said that no update was already installed. The installed updates list remained the same and no updates were offered as none had actually been removed.

  Clear as mud? MowGreen update safety Consumer Services

• iPhone 4 will not restore or update

  Hello

  I just pulled out my old iPhone 4 that I haven't used for probably a year and a half. My iPhone 5 c died on me randomly and I set up an appointment to get it fixed, but until now, I need to access some applications I can download on my 4.

  Surprisingly, the battery is still able to be charged and the phone finally woke up from his sleep. Then I tried to connect to my WiFi, but none of the wi - fi access points appeared in the list, and the upper left corner of my screen went on to say "search". I tried to restart the phone, which has proved to be a heck of a lot of trouble because it would show the logo of apple on the screen for so long each time. I finally went to bed and tried to sleep, but of course to get up to ten minutes later and the phone was finally facing upwards. Same problem of wi - fi. So I thought I would try to update.

  It comes as I had before he told me "this phone could not be updated." and then asked me if I wanted to try the update again, or to restore and update, I tried the update again, just in case. That did not work. So I tried to restore twice (and to update because apparently that was required to restore) and he said "this phone could not be restored." According to me, it gave me an error number (16) and iirc the update error was (17).

  Can someone please?

  During my minutes awake eagerly hoping that it works, I realized I should probably keep my 4, loaded and ready just in case my 5 c dies never again, because my Apple Care runs in June and I will probably not be able to pay a 6 until the 7 came out. Maybe even the 8.

  If I am able to solve this problem and wi - fi still does not work, I'll probably put it in the fridge (that my Iphone 4 32 GB Black can't find any wifi network) because obviously my phone has been reset a dozen times now and my wi - fi works with everything else is probably not the modem.

  I found the answer here: cannot restore my Iphone 4 after an update, Please HELP!

  "I was able to fix this by simply changing the usb ports..."

  Has worked for me, my phone has restored himself. Now is the time to try the hack of refrigerator.

  Edit: so bad, I just went more near my modem (right next to her instead of the room above) and he acknowledged the connection. Hooray!

• After windows auto updates can't open Internet Explorer, but can open firefox. Vista Home Premium, CA Security Suite. Can do system restore and get on, but it will update the next day and problem reports.

  I get a popup to firewall this tells me Internet Explorer tent to access internet I click on allow but get no results. Then I get this page can not be displayed, and you are not logged as an administrator

  Hi Snoopy65,

  Welcome to the Microsoft Answers site!

  Perform a system restore and then try to install each updates manually one by one. Each time that you install the update, restart the computer. Take note of the update that is causing the problem and let us know. We will be in a better place to help you if we know the exact update which is causing the problem.

  To run the system restore

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 32-bit Vista, System Restore and windows update are suspended.

  This problem started happening almost two months ago. When I turn off computer and windows update tells me that it is updated, I leave. Ive come back hours later to see that my computer never updated and turns off. Ive tried click on windows update to update while I was connected and it still crashes just forever. Today, I think I discovered perhaps the underlying problem. Finally, I got fed up and decided to do a system restore, after hours of research and try all kinds of solutions on these forums (none worked). So now he is suspended from the system restore. Suspicious to me that when the windows update crashes is on the screen where it says create restore point.

  What can I do?

  I do not want to download all that regcure, II _ I chercher search on google, seems tgtbt and I don't want to take the risk of harming my system.

  can anyone help please?

  Thank you very much.

  Hello

  You should go to the system manufacturer's website and get the latest network drivers wifi and card.

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after each driver.

  Maybe the other pilots. software and updates to the BIOS, you can get there.

  Control Panel - Device Manager - double-click on a device and check the version.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  then also make - close all regular programs

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or you can copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  Rob - bicycle - Mark Twain said it is good.

• I did a system restore and I went to do my updates, but get this error number: 0x8024400A

  I did a system restore, and I went to do my updates, but this error occurs, could someone please?

  [Error number: 0x8024400A]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  Hello

  1. don't you make changes on the computer before the show?
  2. what Windows update you are trying to install?

  Method 1:
  You can run the fix it and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Perform a clean boot and try to update windows and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
  
  Method 3:
  You can also try the steps in the supplied knowledge base article and check.
  You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after you install Windows XP SP3 immediately after a clean install, or
  http://support.Microsoft.com/kb/943144
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756
  Method 4:
  You can also follow the article mentioned below to resolve the error: 0x8024400A.

  http://support.Microsoft.com/kb/836941

• I did a restore and must now update my computer.

  I did a restore and must now update my computer. I t is not any Service Pack installed. When I select 'EXPRESS' I get the following text "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "I can't run"DIFFICULTY"because I don't have a SP3

  Hi, Linda!

  You may need to install the service pack manually first of Service Pack 1-2-3 in the order
  try clicking on this link below to download of Service pack for XP Service Center package
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs
  Please come back if you need assistance
  Thank you
  Makoi

• critical error after system restore and windows updates

  I cleaned up my old computer and did a system restore.  Subsequently, I have install windows to perform automatic updates.  The computer detected 37 windows updates and install them.  After a successful windows install update, the computer said I had to reboot so I did.  Now the computer tries to start but then comes a blue screen with a bunch of text and then said: critical error.  I tried to do a system restore, and when I get to the part, he begins to restore and gets to 13% and then says critical error and I have tried to try again, but nothing happens.  Stuck... Please advise.

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a repair system restore / boot:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• After restoring factory and updates for Windows 7, the system now asks passwords

  Recently had to do a factory restore on a toshiba laptop with windows 7 preinstalled top. has restarted the machine once he had comepleted and now it says Admin profile is locked and my username and password do not work

  
  

  1 - password was never set on the user profile. (Yes it may have been stupid not to do that for security, but that a person uses the laptop)

  2nd why admin profile has been locked?

  3rd - without having a password to disk or save it on a USB key, how can I get around this?

  4th - also why Microsoft charges to ask questions and get support on their own products?

  * original title - Windows 7 - had to factory restore after updating to windows 7. now, cannot connect to admin or normal user logon. said needs password. PASSWORDS were never defined for this? Please advise *.

  no disc to try this.

  Ive managed to get it to load the office by changing the settings via safe mode, but with a full restore (some missing drivers, IE the sound card), it always seems to be filled with questions. It runs terribly slow now and still doesn't let me do half of what I need to do to restore its former glory.

  at the present time, this will make a nice door stop or decoration of the table such that it cannot serve to something else other than to gather dust.

  does anyone have a suggestion on how to fix this problem that began after I installed the latest update of windows 7, 2 days ago.

  Try this:

  To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option "Repair your computer", select this option and press 'Enter' on your keyboard.

  This will allow you to start system recovery environment and access to the same tools.

  Mobile: http://www.notebooks.com/2009/10/20/improved-recovery-options-in-windows-7/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Even in Safe Mode, minimize, restore and close is missing, even if the functions remain, and a dialog box now appears at the opening of the FF.

  Since I installed the latest update of Firefox, reduce it, restore, and close are missing visually, even if their functions are always present.

  I also started to have one of these dialog boxes asking whether or not I'd like to allow a program to make changes to my PC when I open Firefox.

  I could fix this apparently either by way of turn disable the compatibility mode setting, or by rebooting completely.

  Then, Firefox logo disappeared from the icon for a while, being replaced by the default Windows system image which is displayed under the icon of unspecified files.

  I do not know whether or not the uninstalling and reinstalling Flash Player and restart had something to do with this corrected, but at some point, she is back to normal.

• Portege Z830 - restoration and reconstruction

  I have a Portege Z830 who plays up!.

  I tried to load on the main drivers of function and a few other utilities toshiba to get the lit keyboard, IE helps high and low BRIGHTNESS keys. It did not work.

  Since then, my laptop takes centuries start, I can't use windows update, it crashes and he asks me my password but I can not enter as it crashes again.
  If I use windows troubleshooting tool, which weighs too much. And internet Explorer within the win8.1 does not even the bbc.

  I'm close enough to think that I have to do a full rebuild.

  My challenge is that it is installed with Windows 7 and I have upgraded to windows 8 and 8.1.

  My questions are:
  1. everyone knows what precedes and is there quick ways to solve the above problems.
  2. What is the best way to rebuild my laptop, I have to go back to windows 7 and then upgrade to windows 8 again?

  Ideas gratefully received, I'm ok, reconstruction not eager not to there because it takes forever to backup and restore, and I must be missing something. But I think its necessary.

  As far as I know that the Portege or Satellite Z830 series was not supported to win 8.1 by Toshiba because he did not appear in the Windows 8.1 compatibility matrix.

  This means also to win 8.1 drivers or software for this series isn't available and not downloadable. This could be the reason why you n t get some special features for laptop.

  From my point of view of a few you might try to fix the Win 8.1 preinstalled using the repair feature s own system. If this doesn t help, I'm afraid, you need to restore the system of m.

  Are you what is the best way to rebuild the laptop?
  Well, it depends on the operating system.

  The Portege Z830 was pre-installed with Win 7. In this case the use of the Toshiba recovery disc install Win 7 again.
  If you want to reuse 8.1 Win, you have two choices: either you would update the Win 7 system-> 8-> 8.1 Win Win
  Or you buy the Win 8.1 Microsoft license and install own 8.1 win on this laptop.

  But as I said above: the drivers Win 8.1 and the software isn't available for this model

• XP - error Code: 0X80072F78 (cannot restore hidden updates)

  Restore hidden update option is grayed out. It won't let me him. have not received updates since 2/2010. all of the suggestions. also receive error 0x80072F78 #. This is for Windows XP. Thank you

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads , http://social.answers.microsoft.com/Forums/en-US/w7repair/threads , http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Is it possible to reset the date of the last virus and update the spyware definitions in XP?

  I have xpsp3.  I was looking at my calendar to find out what day of the week, an event that happens in November, and unfortunately I forgot to go back to the date of the day before I have updated the definitions of viruses and spyware on MSE.  Now, MSE think my latest definitions of viruses and spyware are obsolete, because they were supposed to be updated three months from now.  So my question is: is it possible to reset the date of the last virus and update the spyware definitions in XP?

  Correct the date on your computer. Remove the antivirus/malware product and reinstall.

  -OR-

  To restore before the update, use the system restore. Make sure the date is correct. Update.

  Tom Ferguson

• Restore hidden updates is greyed out

  I need to restore an update that I've marked to not show again and my hidden updates 'restore' under options is grayed out.  How can I get that back?  I did a reboot one or twice after having my updates and it still does not.

  Thank you

  Hi ThelmaHawk,

  Try this, click on Start-. "" "" "" ">" Control Panel "--->"Security Center "--->"automatic updates 'and at the bottom of the page, click on the link, ""offer updates again, that I've previously hidden ', , then click on "Yes" when prompted.

  I hope this helps.