ESX3.5 U5 file system question

Similar Questions

• file system question for cam action DRH-AS30V adapters

  The microSDHC card provided with this camera is formatted to support the FAT32 file system, and so is limited to 4 GB files. I need to know if the camera formats cards differently adapters. What cards adapters format camera for the exFAT file system? Thank you!

  Each time an SDXC card is inserted, the action cam uses the format instead of the format FAT32 exFAT. In fact, the device to which you connect the cam action (more an SDXC card inserted) must also support exFAT file system. Otherwise, the action cam / card will not be read correctly.

  If my post answered your question, please mark it as "accept as a Solution.

• a few questions on file systems that were used in the past or present in windows, mac, linux.

  Hello

  1. I see that in the past was also file system VFAT was used.  but I've never heard of this file system until today. is it now used in any system?

  2. I see Linux a ext4, ext3, ext2, files systems, but where is been used or were using reiserFS file system?

  3. also I have a question hfswrapper , I know that mac use hfs, hfs + and hfsx file system, but where is served hfswrapper file system

  very short explanation wil suffice.

  Thank you

  Johan

  Use Google to search for it.

  What is a short explanation?

• Question about creating a recovery (file system) USB flash drive

  Hello and happy new year to all, (I'm from greeece, sorry for the mistakes of language possible)

  (Pavilion dv6-6c01ev - Windows 7 Home Premium 64-bit - bought 08-21-12)

  I want to create a USB stick recovery, and I just bought a USB flash drive 32 GB 3.0 for this reason.

  I've never done it before, but I have read how, according to the this page.

   

  My question is:

  What file system must be the USB key, before the decision-making process? FAT32 or NTFS ?

  Bought, thati USB file system is FAT32 by default.

  I already read that on the page above: 'a message of Recovery Manager opens indicating that the flash drive will be formatted. Click OK to format the USB key and continue. »

  but I would like to have, and a more definite answer from someone who knows better.
  

  So, does change the NTFS file system.

  or should I now start the manufacturing process of the recovery USB flash drive as it is (FAT32)

  Thank you for your help

   

   

  I have already created the recovery USB flash drive, and formatted Recovery Manager the disk before the process,

  and at the end, when the recovery files was written and verifyed.

  I look at the file system of the USB flash drive, and it's NTFS...

  I worried for nothing...

  Thans anyway...

• Question about external hard drive file systems

  Some of my external hard drives use NTFS, other system FAT 32.  I use them mainly for the storage of RAW images, and they must be able to Exchange files between them, and with my computer using Photoshop 5 and Windows 7.  Should I wait for problems between these two file systems?  Or can it be just ignored?

  NTFS is better than FAT32. In addition to the benefits of using NTFS as mentioned by BearPup, the files will be safe as well as FAT32 NTFS. In addition, FAT32 has a maximum file (one file) to 4 GB size restriction. In addition, the file cannot be stored. For NTFS, it is more than 20 GB. The NTFS file system accident rate is very low compared to FAT32 format.

• question of GSX almost full file system

  OK, I know that the gsx is old school but I am charged to keep it running. I have these two error. my hope is that someone has seen this before and know what direction I should take.

  1. temporary files for this virtual machine are stored in the directory ' / tmp/vmware-root, "which is a nearly complete file system. Please free up disk space. do you want to continue?

  Choose Retry to continue, Cancel to end the session.

  2. the directory ' / var/lib/vmware/machines/virtual uils2, 'less than 132 MB of free space. " running out of space in this directory may corrupt the virtual machine. This is likely to result in the prompt

  shut down the operating system. to envelope issues, continuing Vmware recommends you move or delete files to free up space now, after release of selected space.

  to ignore this condition until you turn off or suspend the virtual machine, select ignore.

  I did in PuTTY and carefully remove the older log files, but this is not enough. I can now run one of the two server who live on this box gsx... but as soon as I start the second swtart an i get these errors again...

  Today, I got a few new errors I enclose the

  Help.

  KRS

  Thread moved to VMware Server 1 / forum to the GSX.

  What version of GSX?  What host operating system?

  Have free you enough disk space host as indicated by messages you need?

• Impossible to mount the drive external HARD under Ubuntu Linux - file system damaged and MFT

  I get the following error when I try to mount my external hard drive on my Ubuntu.

  UNABLE TO MOUNT
  Error mounting/dev/sdc1/media/khalibloo/Khalibloo2: command-line ' mount t 'ntfs' o ' uhelper = udisks2, nodev, nosuid, uid is 1000, gid = 1000, ask dm = 0077, fmask = 0177 "" / dev/sdc1 "" / media/khalibloo/Khalibloo2 "' came out with the exit status no lame 13: ntfs_attr_pread_i: ntfs_pread failed: input/output error".
  Cannot read MFT, mft = 6 count = 1 br = - 1: input/output error
  Could not open the FILE_Bitmap inode: input/output error
  Failed to mount ' / dev/sdc1 ': input/output error

  NTFS is incompatible, or there is a hardware failure, or it's a SoftRAID(4)/FakeRAID hardware. In the first case run chkdsk /f on Windows, and then restart Windows twice. Using the /f parameter is very important! If the device is a SoftRAID(4)/FakeRAID then frst activate and mount a different device under the/dev/map/directory, (for example/dev/map/nvidia_eahaabcc1). See the documentation for 'dmraid' for more details.

  It is not mount on windows either: "i/o device error".

  This is a disk with a single partition hard ntfs

  Of course, I tried chkdsk /f. reported several file segments as unreadable, he didn't say if he fixed them or not (apparently not). also tried with the indicator/b.

  ntfsfix reported as corrupted volume.

  TestDisk was able to correct a small error with the partition table by adding the '80' for the active partition indicator (only). TestDisk also confirmed that the boot sector was very good and it corresponded to the backup. However, when you try to repair the MFT, he could not read the MFT. He could not also the list of files on the hard drive. It says file system may be damaged.

  Active @ also shows that the MFT is missing or damaged.

  I tried to replace the USB cable. Has not changed anything. I tried to update the driver. Windows reported that he was already up to date. Yes, the pilot has been activated.

  So, how can I fix the file system? or MFT? or the I/o device error?
  I used the HARD drive for months. This problem started 2 days ago. I also tried to mount it on other computers, without success.

  Hello

  I'm sorry to read about problems with your drive.
  Unfortunately, I think that the question is misplaced a bit as your case appears to be the health of your rather external HARD drive that a specific problem related to Linux.

  To add clips, if the tools you use have failed to fix your drive, then I do not think that a user 'normal' forum will no longer.
  I know it's a fine recommendation and probably just add salt in your wounds: If you really care for files, do a sector backup before doing any file system / partition own modifications.
  The reason is very simple - if the tool you use has made a mistake when judging what actions are the right ones, and submit these changes, you move your goal - and fast!
  Instead of repairing, the tool can simply corrupt data even further.
  Any subsequent change aggravates the disorder exponentially.

  Judging by the details in your message, I'm sorry to say that I think your drive is defective, or at least the data is lost.
  Of course some companies will probably be able to restore it, but that normally costs a fortune.

  Unless you are willing to spend astronomical amounts of money on data rescue, so I suggest to accept data loss and look at what you can do with the HARD drive.
  Try to format. No problem, this indicates the drive is defective and must be replaced.

  Sorry for so little help.

  Tom BR

• Backup error ReadyNas DUO - «read only file system»

  Hello community,

  I hope you can help me with a problem I'm having with my ReadyNAS Duo (v1) running Raidiator 4.1.14. At night, it is running a backup job that copies a file from a computer on the local network to the NAS itself. What often happens is after a reboot for a while, things work sometimes days, sometimes weeks. But then I get e-mails warning that contains journal like entries:

  CP: cannot create the file ' / backup/projecten/./CAM_strip/01_v0.1.JPG': read-only file system

  Usually this warning is given for each file (which means thousands) so that emails are big enough. And obviously the backup has not been made. I tried to solve this problem and sought similar questions on this forum and on the web, but nothing helped. I can't identify what is the cause.

  Maybe you could help me the grace to some of the run settings, I can tinker too. I guess it has something to do with the ownership and rights to access these files and folders.

  Thank you!

  Hello Miss,

  Aside from trying StephenB and JennCs suggestions, if you create a test share, can you tell us if you will experience the same behavior in read-only?

  Forward to your response.

  Kind regards

  BrianL
  NETGEAR community team

• Startup/recovery disks and file system Image.

  I know that DO START/RECOVERY disk can be made only once. But not preventing the system from IMAGE files, or would it be the RESTORATION of the file SYSTEM.

  How is my setup.

  The original 1 TB HARD drive came with the PC will be the OS (INSTALLED at the factory) and RECOVERY. And this will be the storage. I'll install a 120 GB SSD to be used as C drive. I'll install the OS from the BOOT/RECOVERY disk on drive C for two reasons. To ensure that it is a CLEAN INSTALLATION and ensure that it is NOT of QUESTIONS if they work or not. Then they will be stored in a place course.

  Then I would be able to do a SYSTEM RESTORE/RECOVERY file. And no longer on the internal memory or external storage.

  Anyone with knowledge of this and a better solution I don't know.

  Disc SSD 120 GB OS 'C '. 1 TB of disk storage HARD drive "D", (OS and RECOVERY will always be INSTALLED)

  The question "what is prevented from make the SYSTEM IMAGE files" - image files may consist of training, but with different software.  Several solutions for this by choosing software that makes the image IE files: Norton Ghost, Acronis, Paragon, etc..

  System Restore is a feature of Windows and does not make use of the same action, but it is useful in the return of the system to an earlier date.

• RAID 5 volume is corrupted, RAW and not NTFS file systems shows now Windows can't read the Volume.

  RAID 5 volume is corrupted, files systems shows RAW and not NTFS now, Windows cannot read Volume, how do I convert to NTFS without losing data on the Volume. Raid 5 has been created by the Raid software

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information helps.

• How to format the RAW file system in my pen-drive?

  Dear friends,

  I have a 2 GB key USB "GENX". I used it for about six months without any problem. But now I have a serious problem that has changed its system of RAW files accidentally. I didn't really know what the reason for that! He didn't connect with any dangerous computer.

  Its file system is FAT 32. It contains a few songs, some software, photos, videos etc, but they are not important. So I don't want to put data files.

  My question is: at y - it software or sort {command type us in the command e.t.c. prompt} to format my USB? I don't want to give anything, I just empty it transform the FAT32 or NTFS file system.

  I use Windows X P-SP3. For 2 months, I searched the entire internet to solve my problem, but no use. I tried many software! They are not useful for me, because they help just to recover the files that it contains.

  When I connect my pen-drive, an error message appears "the disk in drive G is not formatted. You want to format it now? "When I click on YES an other error message is displayed-"Windows failed in the full format.

  If someone help me which can give pleasure to thousands of people. Because when I looked / was asked about this issue, I realized that many suffer from it.

  Dear friends please help...

  BY Abin cherish.

  Dear friends...

  Its with great pride and joy to inform you that I formatted my pen-drive successfully. After almost one and work hard for semesters. I tried several software but they all failed.

  I ask you all to try transcend recovery tool online to achieve this. (link:- http://www.transcendusa.com/Products/ORTCount.asp?URL=Software/OnLineRecovery.exe&action=Download ).

  Its a small tool. He RAW file system format, even if our pen-diving is not made by Transcend. Even if the format successfully completed, we are not able to use the device because it shows that it is write protected. So can you please do the following:

  1) click Start-> Run.

  (2) type regedit and press to enter.

  4) click the plus sign next to HKEY_LOCAL_MACHINE

  5) click the plus sign next to SYSTEM

  6) click the plus sign next to CurrentControlSet

  7) click the plus sign next to control

  8) click the plus sign next to StorageDevicePolicies

  (9) write click on WriteProtect and click on modify.

  (10) if the value is 1 change 0, and then click ok.

  (11) the registry editor close and restart the computer.

  Now, you're done. Your pen-drive is now ready.

  But one of the problems is that we do not have the same space as before. In my case my previous device of ability was 1.87 GB. But after I fixed, reduced ability to 1.67 GB. I'm not worried about it because I think I'm the only one to format this type file system.

  Thank you friends...

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume D: utility.

  However, chkdsk finds no problems, so what happens?

  Checking file system on D:
  The type of the file system is NTFS.
  Volume label is A RAID.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.
  Windows will now check the disk.
  Cleaning of minor inconsistencies on the drive.
  Cleaning 9 unused entries index $SII of file 0x9.
  Cleaning 9 unused entries index $SDH of file 0x9.
  Cleaning unused 9 security descriptors.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.
  CHKDSK is verifying file data (stage 4 of 5)...
  File data verification completed.
  CHKDSK is verifying free space (step 5 of 5)...
  Free space verification is complete.

  244196000 KB total disk space.
  126454172 KB in 238052 files.
  109736 Ko 22501 index.
  0 KB in bad sectors.
  868124 KB in use by the system.
  65536 KB occupied by the log file.
  116763968 KB available on disk.

  4 096 bytes in each allocation unit.
  61049000 total allocation on the drive units.
  29190992 allocation units available on disk.

  He is so little known about your configuration - because the forums MS Answers do not ask for information, when a new question is asked.

  If you run some kind of RAID configuration, you might do better if you describe your RAID configuration and after the actual event that you see in the event log (is it event ID 55?).  Then maybe you will get some ideas of the Microsoft Support engineer who might actually work.

  You see just this event in the paper at random times or is it when you try to run a specific operation and if yes, what operation triggers the event?  Here is an article of MS to help get you started, but if you use Google to search for the error message, you can find more ideas:

  http://support.Microsoft.com/kb/246026

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.

  Here's how to publish events to the event to display the log files:

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• FAT32 can convert my NTFS file system?

  my computer is in FAT32 instead of NTFS file system and it won't let me format it, what should I do?

  my computer is in FAT32 instead of NTFS file system and it won't let me format it, what should I do?

  First of all. Note that your * computer * is not FAT32, it is your hard disk which is FAT32. You may have several diosk readers and some could be some FAT32 and NTFS.

  Second, you cannot format your drive from Windows; It is like cutting the branch of a tree, on which you sit.

  Third, why do you want to get in shape? To reinstall Windows or simply to change to NTFS? If you want to reinstall Windows, boot from the Windows CD and follow the instructions for a clean install. It will begin by formatting the drive for you.

  But if you just want to change your drive to the NTFS format, use the CONVERT command. But first read http://www.aumha.org/a/ntfscvt.htm because there is an important question about the size of cluster that is not obvious.

  Note also that conversion is an important step, touching everything on your drive. When you take a big step, no matter how unlikely it is always possible that something can go wrong. For this reason, it is prudent to make sure that you have a backup of everything you can't afford to lose before you start.

• boot problems after "disk error-checking/control - automatically fix file system errors.

  I ran the two options 'check disk' after deleting some old programs and was prompted to restart. When it restarts it was all white screen, then I stop after waiting a few minutes using the power button. now it won't start at all - I have white screen and cannot even get into safe mode by pressing F8. white screen and the fan runs. I is not original boot CD, so tried a CD recovery Norton but would not start from that. I checked the monitor cables.

  It's a 2002 eveshamvale:
  Windows XP Home Edition Service Pack 3 (build 2600)
  Board: Gigabyte Technology Co., Ltd. 8ID533 1.x
  The bus clock: 100 MHz
  BIOS: Award Software International, Inc. 6.00 PG 11/11/2002

  would be grateful for any ideas.
  Thank you

  If you used the power switch, you can inadvertently damage your file system, so before wasting time to try a bunch of things, I could do this (or you may be wasting a lot of time to try things too):

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.