ESX4.0i ESX4.0 Update 1 upgrade path?

The company I work for recently licensed Essentials and license works with ESX 4.0 Update 1.  I have an ESX 4.0i server that I would upgrade instead of doing a rebuild.  At the moment there is no virtual machine on the ESX 4.0i server and I can do...

What is the procedure, if necessary, to perform an in place upgrade of ESX4.0i to ESX4.0 Update 1?

Thank you!

You would have to do a fresh install, impossible to pass between different versions.

Tags: VMware

Similar Questions

  • ESX4! = ESX4i / features / upgrade

    Hello guys,.

    I installed 3 guests ESX4.1i. FEWS weeks ago, I bought a license for Vcenter and Vsphere (essential pack). I entered these licenses on the 3 hosts; everything works fine. But as I tried to make some scripts / installation of packages, I noticed that it lacked some features on the shell of the console. Dummy I thought this feature would be available using a 'proper' license code

    So now, it is possible to go from ESX4i on ESX 4?

    Where can I download the version ESX4? the site of dld VMware is not so clear...?

    THX!

    Kind regards

    RK.

    to do this upgrade, you must reinstall your host.

    Do - what you need to ESX and not ESX (i), in the next version of VMware (Vsphere 5.0) only have version ESX (i). You may have a problem of ESX4.0 update to ESX (i) 5.0.

    follow the link http://downloads.VMware.com/d/Details/esx41u1/ZHcqYnRlQHBiZGhwZA== ESX4.1 update 1

    Please, do not forget the points of call of the "useful" or "correct" answers

    Mauro Bonder - moderator

  • Impossible to reinstall XP, error «...» Windows is not a supported upgrade path"

    Computer is 2001 Sony Vaio apparently infected Office who knows what, if I want to do a clean install of the operating system. The computer came with Windows ME and a drive to upgrade to XP. 5 years, a technician thought he was doing me a favor and installed without my knowledge its own XP Pro.

    I tried to do an installation of my upgrade XP disc but I get this message: Setup is impossible to pass your current installation of Windows XP. Your current Windows installation is not a supported upgrade path. Setup cannot continue.

    I also tried to use the Sony system recovery CD, but it does not work.

    Help!

    Hi IAMSOBZ,

    As you install the operating system from a CD to upgrade it you will be asked for support of qualification, you can insert your Windows Millennium Edition or any CD which is an edition less than Windows XP Professional.

    Important: You will need to have a CD of Windows 98/Me/2000 eligible to insert if you are using a version update of XP to clean install. OEM restore disks will not usually fill the eligibility standard. If the restore disc i386 folder, it will work normally.

    a. start your computer from the Windows XP CD-ROM. To do this, insert the Windows XP CD into your CD or DVD and then reboot your computer.

     

    Note: To boot from the Windows XP CD, your computer BIOS settings must be configured to do this.

    b. When you see the message "Press any key to boot from CD", press any key to start the computer from the Windows XP CD.

    c. once the Welcome to Setup screen, press ENTER to start Windows XP Setup.

    d. read the Microsoft software license agreement and press F8.

    e. Setup will scan for previous Windows installations

    f. you will need to replace the CD of XP with your qualifying CD; XP Setup will scan the qualifying CD and ask you to replace it with the XP CD to continue installing XP.

    g. complete the installation

    You can refer the link to find out how to install Windows XP below: how to install or upgrade to Windows XP: http://support.microsoft.com/kb/978307

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • IDRAC6 upgrade path

    I am temporarily caring for a Dell PowerEdge T610 purchased in 2012.  Our outsourced IT Department walked me through some maintenance tasks, including required launches a Virtual Console through iDRAC6. Apparently my iDRAC6 version (V1.80) is so old, no modern browser it supports fully. What I have for the most part works with Chrome and FireFox, not IE (but it's OK - I don't work with IE either).

    I am trying to determine if a firmware upgrade path exists for my hardware, and if so, what are the steps. None of my research on the Dell Web site have meaningful results. Since my system is no longer under warranty I don't get a lot of help by telephone, and "cat" is denied for me as well.

    If anyone can point me to a good place to get started which would be a great help.  Thank you!

    Hello.

    See the upgrade below. First apply the BIOS, then the respective DRAC6 firmware.

    6.2.3 BIOS iDRAC6 v1.92                   

    BIOS 6.3.0 iDRAC6 v1.95                  

    BIOS 6.4.0 iDRAC6 v1.97, iDRAC6 v1.99 , and iDRAC6 v2.8.0                  

    The path of update will prevent iDRAC communication and other server issues.

  • 13.2.2 to 14.5.0 TMS upgrade path

    Hello

    I'm looking to make an upgrade to TMS 13.2.2 we currently have running on an old box of Windows 2003 R2.

    We are looking to set up a new server using 2012 R2 as the operating system.

    The environment:

    Windows 2003 R2

    SQL Express 2005 w/DB hosted locally

    13.2.2 TMS

    TMSXE (on another server) 3.0.2

    The methodology of Migration:

    Migrate the existing database to a SQL server hosted and test all the features

    If it is successful then

    • Remove the old server from domain/network
    • Rename the new server the same as
    • Install the TMS 14.3.0 on the new connection to the existing database server, hosted on the external SQL Server
    • Run the time zone update tool that comes in 14.3.0
    • Update the 14.3.0 existing install 14.5.0

    This methodology seems as if it was the right way to go? There are fundamental flaws, that I don't see here?

    I did this upgrade path in the laboratory successfully using a copy of our existing database, I have no alternative endpoints or vcs-control etc. to connect to the lab to prove everything works after upgrade.

    I look forward to your responses.

    Thank you

    Alex

    Hello Alex.

    You should consider upgrading to TMS 14.6, which is the most recent version.  14.6 TMS notes.

    TMS 14.5 supports only Windows Server 2012, not 2012 R2, but 14.6 done TMS.  Also, if you are not already the case, consider using SQL Server 2012 or 2008 R2 64 bit, to be compatible with future versions of TMS.

    The steps that you listed sounds good, just check on that TMS installation guides for supported versions of WIndows and SQL details, as well as all the required components.

  • I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

    I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

    How your question about Windows Update?

    The answer to your question is Yes, if you buy Vista Ultimate or business and move to Win7 Ultimate or business.

    Specific Win7 forums include http://social.answers.microsoft.com/Forums/en-US/category/windows7 and http://social.technet.microsoft.com/Forums/en/category/w7itpro/

    ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

  • I can't download any updates or upgrades. I get error 0 x 80244019.

    I can not install updates and upgrades whether window updates or manually.

    Original title: I'm under explorer 8 on Windows xp. I can't download any updates or upgrades. I get error 0 x 80244019. I tried to manually load the updates, but still not the error message

    Windows Update no longer works until SP3 is installed, see here for directions...

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-problem-error-number-0x80240036/5c2fdc0a-3da6-4C3B-9697-a88be681e7c1

    Tricky

  • If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit

    If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit

    If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit

    If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit

    Hello

    You are unable to update or upgrade Vista 32 bit to 64 bit of Vista.

    32-bit to 64-bit, or 64 bit to 32 bit is done by a new installation using a full version of the operating system.

    32-bit and 64-bit are different operating systems.

    See you soon.

  • The game I played request now that I log in as administrator and update and upgrade fails

    * O.T. > Winddows 7

    Two issues have appeared recently. One: the game I played (solo, not online) now the queries that I log in as an administrator. I am the administrator! Two: Despite many attempts to download updates and upgrade to Windows 10, nothing happens!

    Help!

    Thank you

    Right click on the executable file for the game, and then click Run as administrator.

    You can also try upgrading Windows 10 manually:

    Option 1:

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    How to create an ISO or USB drive.

    Select upgrade this PC now and then click Next

    Option 2:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  • When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

    * Original Title: windows update

    When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

    If anyone has any ideas on how it can be fixed please tell me

    Adam

    Please run the Windows Update Troubleshooter:
    http://go.Microsoft.com/?linkid=9830262

    Please provide the exact details of any problem it reports as not fixed.

  • Upgrade path 5500 series ASA-SSM-10

    Can anyone provide the proper for the 5500 series ASA-SSM-10 upgrade path of

    6.0 (5) E2

    TO

    7.1 (10) E4

    The release notes state that you must run just least 6,0000 e4 could so I just spend 6,0000 E4 5,0000 E2 then directly to 7.1 (10) E4?

    Also, the SSM-10 is able to effectively run the 7.1 (10) E4?

    Hello

    Yes, you can directly upgrade 6.0.5E2 to 6.0.6 E4 and then directly to version 7.1. (10) E4. After the upgrade for the latter, you might even go to latest available patch as well.

    -Yes, SSM1 - is able to effectively execute the 7.1.0E4.

    Kind regards

    Akshay Rouanet

  • ACS 5.1 upgrade path

    Hello

    I have just unpacked ACS1121 with 5.1.0.44... Version of the ACS software. Y at - it (upgrade path) proceedings at this level to a version 5.2.x (later

    5-2-0-26-5)?

    You use a repository of tftp. If so try with a ftp repository

  • C / SX / EX / MX upgrade paths

    Hello

    I have been the scene of c20 upgrades via the GUI and CPC, 4.x > 5.1.1 > > 7.3.2 7.1.1 hopping. 3rd party support told me that this is the way to upgrade the C20s.

    I struggled to find any documentation to confirm this upgrade path to 7.3.2. I'm about to proceed to the upgrade C40s and 60 with SX / EX / models MX.

    I'm looking for the validation of the document confirm how best to spend to 7.3.2 on all of the above models.

    I looked at the release notes do not seem to talk about any version of jump requirement.

    Thank you

    B

    You can go directly to the current version of the TC software without having to jump several releases to get there.  You'll just need to get the keys to unlocking the Cisco Licensing Portal TC7.x and apply it on the codecs, before doing the upgrade.  Applying the unlock key invites you to restart, you can disregard and go directly to download TC as the upgrade to restart anyway endpoint and apply the release key at the same time.

    Note, it is important that you read well ALL the TC release notes for the current version, you have up to TC7.  There are several versions where changes have been made that could be important to you.  Some of these changes are:

    • TC5.x - required serial connection is by default enabled (important only if you use control 3rd party such as Crestron or AMX systems)
    • TC6.x - layouts have changed, especially when using two screens with presentation and selfview.
    • TC7.x - Root access has been removed (I noticed that mention you SCP that requires root access), also instantaneous behavior has changed over the previous day.

  • Windows update: error code preventing me from to update and upgrade to Windows 10.

    Original title: error codes

    error code preventing me from to update and upgrade to windows 8.1 and Windows Update 10

    Hmm, take a look on...

    http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76

    Having problems connecting?

  • vCD 8 upgrade path

    Hi all

    Can upgrade you form vCD 5.5 directly to vCD8.0 or are you to go first to 5.6.4?  I can't find anything in the notes version or installation & Upgrade guide.

    Dave

    OK - I answered my own question with the Matrices of the interoperability of VMware products.  I don't know if the "Upgrade Path" option is new, but I don't remember having seen it before.  In any case, the vCD 8.0 upgrade is supported from version 5.5.4 and 5.6.4.

    Dave

Maybe you are looking for