ESXi 3.5 Update 4-64 bit support

Similar Questions

• How to install esxi 4.0 Update 1 on Dell PE 710 R

  How to install esxi 4.0 Update 1 on Dell PE 710 R? on esxi, we want to create virtual machines for windows 2008 r2.

  We can use Dell Open manage and it gives options to use esxi 4.0 or we need to start directly from esxi 4.0 Update 1 CD and run the installer.

  Please suggest the best way to configure esxi 4.0 on dell 710R server.

  If you are on the Dell hardware, you need at least generation 9 material, for example, a Dell PE 1850 or 2850 will not support a Windows 2008 R2 64-bit o/s. If you're on a material later, where the processor supports the technology of Intel Virtualization (VT), you can enable it in the BIOS of the host.

  Please note that R2 support is "experimental" - you will need to ESXi 4.0 Update 1 installed full support.

  Hope that helps

• Red Hat Enterprise Linux 7 guests in ESXi 5.5 Update 1

  The Guest OS Installation Guide indicates that RHEL 7 guests are supported with ESXi 5.5 Update 1 but RHEL 7 does not appear as a guest operating system during the construction of a new virtual machine. I built a virtual 7 of RHEL machine by selecting the operating system 64-bit RHEL 6 asked and have not had any problems. Anyone had a similar experience?

  I tried this in my lab and I see the same thing.

  Selection of RHEL 7 as guest operating system is available in the Web Client. See screenshot below

  

• ESXi 4.1 Update 1 and material update 4 to 7 cards of network breaks vCenter.

  I installed ESXi 4.1 update 01 on 2 servers.  Then I updated the hardware version of all servers in version 4 to 7.  Now the vCenter has no network adapters!  Research in the Windows Device Manager indicates Intel E1000 adapters with a yellow exclaimation point.  Try updating the drivers doesn't produce a message that says that the drivers are up to date.  All other Windows servers work correctly with their network cards, just the Windows 2008 R2 64-bit vCenter server is not able to connect to a network.

  Hope someone has an answer.  Called VMware support, but they will call back within 8 hours.

  Greg

  You can check 'NIC hidden' and then delete them if they exist as described in article 1179 KB.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1179

  Gene

• KB981793 update Vista 64 - bit SP2 error 8024200d

  Windows Vista 64 - bit SP2. Update cannot be installed with 8024200d error code. ALEKS

  Error 0x8024200D code is:
  SUS_E_UH_NEEDANOTHERDOWNLOAD
  The Setup program requires more data to download

  Try manually downloading and installation: http://www.microsoft.com/downloads/details.aspx?FamilyId=41988289-8fa9-4d3d-a959-d3e64ccc6071&displaylang=en

  or

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  then try wu

  TaurArian [MVP] 2005-2011 - Update Services

• Is the PowerEdge R610 Compatible DELL VMware ESXi 5.1 update 1 recovery Image?

  Hi all

  Does anyone know if the R610 is compatible with the recovery Image VMware ESXi 5.1 update 1? It is not on the compatibility list, but the r.620 is there. We use two servers in our VMWare environment and I want to upgrade to 5.1 U1.

  Thanks in advance!

  Lee

  Hi Lee,.

  The long wait has its result.

  Seems that it's a typo. Engineering has responded that it is supported.

  Let me know if you encounter other problems.

• Updates for 32-bit system continually fail

  Original title: update windows 32 bit dor

  updates for 32-bit system continually fail.  My system is 64-bit

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Personalized Cisco ESXi 5.5 Update 2 Image

  When can we expect to see the new custom image ESXi 5.5 Update 2? I just checked VMWare site and I see 1 update but not update 2.  Is there a method of supported / recommended update servers UCS to ESXi 5.5 Update 2 in the meantime?

  Thank you

  (1) use this utility to understand what enic / fnic is necessary. EG.for U2 5.5 ESXi

  Driver = 1.6.0.12 (FNIC) / 2.1.2.59 (ENIC)
  Adapter = 2.2 Firmware (3)

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  (2) install ESXi 5.5 U2, iso regular (Non OEM version) of the VMware Web site

  (3) get the fnic above / enic pilot since an ISO image of the UCS-based drivers 
  UCS-bxxx - drivers. 2.1.3d.iso

  (4) update the fnic/enic driver manually with either CLI or VUM.

• GTIS-90086 'Lack of 64 bit support' error downloading Adobe Air application questions

  Hello

  I have an Adobe Air based application which I previously downloaded using the iTunes connect application loader.

  Today, I get the error: ERROR ITMS-90086 'Missing Support 64-bit' iOS apps submitted to the App Store must include 64-bit support and built with iOS SDK 8 or later.

  It's weird because the 64-bit requirement has existed for some time and I use the same build method has been accepted previously.

  I tried the building without the extensions to exclude third party extensions. I have updated to the latest version of the Air SDK and use new certificate/provisioning profiles.

  Any ideas, what has changed?

  Tom

  Try to update Application Loader 3.1 or newer or install xcode last

• USB or HDD space for new server ESXi 5.5 updated 3 current enforcement?

  Hello

  We get a new DELL server to run ESXi 5.5 update 3.

  Just find out there is an embedded version of ESXi 5.5 update 3 on a USB is connected.

  We would like to know what meaning it is best to run ESXi - USB or Local HARD disk?  I think that if she runs on the Local HARD disk, we can remote access via DRAC card.   In addition, we do not use any local HD (i.e. no VSAN) and so there is no loss if VMware runs on the HD.

  Your opinion is requested.

  
  Thank you

  Hello.

  With ESXi on USB/SD is supported by VMware, so no problem here. Remember that if you use these devices, you'd probably set the partition scratching at some storage 'persistent '. I personally use one of the data stores for all guests, I have it in one place.

  I don't understand why you assuming that through a port USB as a boot device will not provide access to DCUI via the DRAC? Boot device has no importance here...

  So, to answer your question: you

• Update Server VC and 5.5 ESXi hosts to update 3 b (Build 3248547)

  I'm in vCenter Server 5.5 and 5.5 ESXi hosts.  Both are updated 3A, patched to version 201510001, which is the build 3116895.  I plan the upgrade of update 3 b (Build 3248547) and I'm a little confused on the question of SSLv3.

  I wonder if this point below ESXi55 U3b & VC 55U3b Known Issues applies to my config:

  ESXi does not automatically added to the inventory of the vCenter servers
  If you install an earlier version of vCenter Server and vSphere Update Manager for ESXi 5.5 updated 3B, then after the task of sanitation, ESXi does not automatically added to the VC inventory. Remediation process never gets done and ESXi State of connection in the VC inventory is presented as disconnected. Solution: When you restart ESXi after reorganization process is started, enable SSLv3 on ESXi (which is disabled by default). This will ensure that ESXi is added to the VC inventory automatically in minutes and sanitation as completed.

  If I'm reading things correctly, upgrade to vCenter Server to 3 b first and then upgrade the ESXi hosts, will avoid lost communication problems.  Can anyone confirm?

  It should be good if you update vCenter first.

  The problem is that pre - U3b vCenter 5.5 forces an SSLv3 connection when connecting to an ESXi host on port 443 (not the reverse). It does this, even if the host ESXi and vCenter SSL/TLS libraries actually support TLS 1.0 + since at least vSphere 4.0.

  So when you update one host to 5.5 U3b, the oldest vCenter again will try to force a connection SSLv3 that will fail, since SSLv3 has been disabled to the host. If you're updating vCenter, first of all, it will initiate a good TLS 1.0 + connection to more similar and updated hosts.

  Here is an explanation of the (pre - U3b) vCenter SSLv3 handshake behavior:

  Re: vCenter and host communication SSL v3

• ESXi 5.0 Update 1 with view Mode Local

  I have problems using view Mode Local with ESXi 5.0 Update 1. When I try to go on the computer I get the following error, "this office cannot be extracted. The client does not support hardware version of the virtual machine. "We use View 5.0.1 Build-640055. At first I thought the View Client provided by the display server had not caught up with the hardware version of 5.0 update 1, so I downloaded and installed View Client 5.1.0 Build-704644 and I still get the same message. If someone could provide no indication about this it would be greatly appreciated. Thank you.

  8 Virtual material could not be used with 5.0 and local mode view.

  Upgrade in 5.1 mode

  Thread moved view area.

• Only Indesign and DPS support 64-bit support required apples as Apple announced is required as of February 1, 2015?

  I got this email from Apple.  I use Xcode to build, I only use InDesign. InDesign and DPS will meet the requirements of Apple?

  It's the email:

  Dear developer,

  As we announced in October, beginning February 1, 2015 new iOS apps submitted to the App Store must include 64-bit support and built with iOS SDK 8. Beginning June 1, 2015 app updates will also have to follow the same requirements. To enable 64-bit in your project, we recommend using the default Xcode build the 'Standard architectures' setting to build a single binary with 32-bit and 64-bit code.

  
  

  Thank you

  Deb
  

  The next update, in January, it will take into account.

• ESXi 4.1 update 1 Embedded, ESXi Embedded 5?

  I can update ESXi 4.1 update 1 Embedded ESXi 5 embedded?

  as I don't see this on the compatibility guide.

  Stephen

  If you do not use VUM you must start with the installation of VMware 5 CD. It might be interesting to do a backup configuration before installation. With a backup of the configuration, you can do a new installation that can eliminate installation issues if you have everything installed drivers not supported. Make sure that validate you the HCL before any upgrade to ensure that all your hardware is supported. http://VMware.com/go/HCL

• ESXi 3.5 Update 4?

  What is the policy of VMWare on updates to existing products once a new major version is released?

  For example, once that ESXi 4 is out there will continue to be updated to ESXi 3.5? Can we expect an ESXi 3.5 update 4?

  PS. I tried to update the object of this message to ESXi 3.5, but the change does not appear.

  Hello

  Read this article: Strategy of Life Cycle of VI support for details.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki