Personalized Cisco ESXi 5.5 Update 2 Image

Similar Questions

• Is the PowerEdge R610 Compatible DELL VMware ESXi 5.1 update 1 recovery Image?

  Hi all

  Does anyone know if the R610 is compatible with the recovery Image VMware ESXi 5.1 update 1? It is not on the compatibility list, but the r.620 is there. We use two servers in our VMWare environment and I want to upgrade to 5.1 U1.

  Thanks in advance!

  Lee

  Hi Lee,.

  The long wait has its result.

  Seems that it's a typo. Engineering has responded that it is supported.

  Let me know if you encounter other problems.

• Upgrade VMware ESXi 6.0 Update 2 VMware ESXi 6.0

  Hello I am running my PowerEdge T110 II with VMware ESXi 6.0 - Dell customized image. I see that from April 15, 2016 Dell just introduced VMware ESXi 6.0 Update 2 and I'd like to update my system.

  On the download page , I see there is an option to download and the ISO file. I wonder if this installation will completely be wipeout my existing VMware ESXi 6.0 - Dell custom and all the settings and I have to start all over again or update 2 ISO just 'modernize' my network?

  Hello

  You can use it to update without doing a new install. KB.VMware.com/.../Search.do; cmd = displayKC & externalId = 2109711 #Inter

• USB or HDD space for new server ESXi 5.5 updated 3 current enforcement?

  Hello

  We get a new DELL server to run ESXi 5.5 update 3.

  Just find out there is an embedded version of ESXi 5.5 update 3 on a USB is connected.

  We would like to know what meaning it is best to run ESXi - USB or Local HARD disk?  I think that if she runs on the Local HARD disk, we can remote access via DRAC card.   In addition, we do not use any local HD (i.e. no VSAN) and so there is no loss if VMware runs on the HD.

  Your opinion is requested.

  
  Thank you

  Hello.

  With ESXi on USB/SD is supported by VMware, so no problem here. Remember that if you use these devices, you'd probably set the partition scratching at some storage 'persistent '. I personally use one of the data stores for all guests, I have it in one place.

  I don't understand why you assuming that through a port USB as a boot device will not provide access to DCUI via the DRAC? Boot device has no importance here...

  So, to answer your question: you

• Problem to install ESXi 4.1 update 1

  I had a problem during the installation of VMware ESXi 4.1 update 1. I have attached an image with this mail. It appears once I hit F11 after loading files and the acceptance of the license to install and do not operate. Could someone help me please.

  I'm not familiar term "Proliant model". is the term of avobe you wanted to say

  HP appoints its servers "Proliant", for example HP Proliant G7 BL460.

  To install ESXi on this server model, you may need to use HP custom image. Please take a look at http://kb.vmware.com/kb/1035114 for details and the download link.

  André

• Can I update the image of factory restore?

  Hi all

  I recently had the pleasure to make a 'factory restore' on a M100 and an A300.

  While the process went smoothly (even if the A300 recovery disk creator should not be put back first to make it work), data that has been restored were, of course, obsolete because he didn't understand not updates either the operating system (Vista Home Basic) or to one of the Toshiba Software (including drivers and tools utility).

  I know that you can return the system to Toshiba for a new image of the HARD drive by them (at great cost), but I don't know if that provides a picture of 'update' or if she simply replaces the original image (obsolete).

  Is it possible the 'factory restore' image stored on the recovery partition can be updated and a user, or a technician of the 'non-Toshiba"without having recourse to external software such as Acronis?

  Thanks in advance for all advice offered.

  Hey Buddy,

  No, you can update the image of factory restore t. Settings (Windows, driver, etc.) are stored in an image that can t be changed or updated because these settings are pre-tested on your laptop computer and any change would be not compatible. In addition, I think that Windows updates are made with two or three clicks, you need just to a good internet connection. Alternative, you install Microsoft's latest Service Pack which contains many important updates ;)

  By the way: I made my own image using Acronis image. After the installation of recovery disk Toshiba I removed all applications that I n t need (ConfigFree for example), installed the Windows updates and my other apps that I need (Skype, Office, etc.). After that, I tested the laptop a bit and finally and especially that I created an image with Acronis. So I can restore my own settings every time too. ;)

• using vmware update manager to update Dell M630 ESXI 5.5 update 3

  I use put vmware update manager (VUM) up-to-date Dell M630 ESXI 5.5 updated 3. The Dell build was published on 11/13/15.

  The results of the baseline VUM are attached. I was surprised that some older patches from 2014 are suggested, and even complete full update and 2 update 3. Is a common practice to just update with whataver MUV said, or is it best to get VUM to apply the patches after the date of release of a version of the seller?

  If missing the update you must certainly apply. I'm just going by what suggests Manager Update and apply all the patches.

• Update Server VC and 5.5 ESXi hosts to update 3 b (Build 3248547)

  I'm in vCenter Server 5.5 and 5.5 ESXi hosts.  Both are updated 3A, patched to version 201510001, which is the build 3116895.  I plan the upgrade of update 3 b (Build 3248547) and I'm a little confused on the question of SSLv3.

  I wonder if this point below ESXi55 U3b & VC 55U3b Known Issues applies to my config:

  ESXi does not automatically added to the inventory of the vCenter servers
  If you install an earlier version of vCenter Server and vSphere Update Manager for ESXi 5.5 updated 3B, then after the task of sanitation, ESXi does not automatically added to the VC inventory. Remediation process never gets done and ESXi State of connection in the VC inventory is presented as disconnected. Solution: When you restart ESXi after reorganization process is started, enable SSLv3 on ESXi (which is disabled by default). This will ensure that ESXi is added to the VC inventory automatically in minutes and sanitation as completed.

  If I'm reading things correctly, upgrade to vCenter Server to 3 b first and then upgrade the ESXi hosts, will avoid lost communication problems.  Can anyone confirm?

  It should be good if you update vCenter first.

  The problem is that pre - U3b vCenter 5.5 forces an SSLv3 connection when connecting to an ESXi host on port 443 (not the reverse). It does this, even if the host ESXi and vCenter SSL/TLS libraries actually support TLS 1.0 + since at least vSphere 4.0.

  So when you update one host to 5.5 U3b, the oldest vCenter again will try to force a connection SSLv3 that will fail, since SSLv3 has been disabled to the host. If you're updating vCenter, first of all, it will initiate a good TLS 1.0 + connection to more similar and updated hosts.

  Here is an explanation of the (pre - U3b) vCenter SSLv3 handshake behavior:

  Re: vCenter and host communication SSL v3

• Hello, I am creating a mini site for a client via muse, is it possible that it could be updated (adding images) without muse by passer?

  Hello, I am creating a mini site for a client via muse, is it possible that it could be updated (adding images) without muse by passer?

  Hello noutcall19,

  If you intend to replace the existing images in the site then you can certainly do it with the help of InBrowserEditing, but it is not possible to add new images by using InBrowserEditing.

  https://helpx.Adobe.com/Muse/using/in-browser-editing-websites-third-party-hosting.html#up meetings % 20 a % 20website % 20Selon % 20 In-Browser % 20Editing

  Kind regards

  Vivek

• Upgrade of the 3 HP VMware ESXi 5.1 update kills Emulex network and cannot be cancelled?

  People,

  I have a serious issue here after the upgrade of the HP Blade 465 BL c G7 with adapter Emulex NC551i double Port FlexFabric 10 Gb..

  The problem: after the successful online update of ESXi 5.1 Update 2 Patch 5 (2000251) in ESXi 5.1 update 3 (2323236) the ESXi server cannot be crazy, or it can ping to the outside network, so she doesn't have to reconnect to the VCenter server.

  Software/Firmware version:

  The version before the upgrade of the server are:

  ~ # ethtool-i vmnic0

  pilot: be2net

  version: 10.2.293.0

  firmware version: 4.9.416.2

  bus-info: 0000:04:00.0

  ~ #

  Since the version above does not work, I managed to download VMW-ESX-5.1.0-be2net-10.2.477.20-offline_bundle-2541837.zip for upgrade the driver VMNic in: 10.2.477.20 but still after the update and restart the network is not able-ping.

  ROLLBACK:

  I also tried to restore to previous work ESXi Server version 2000251 to the help of SHIFT-R but the ESXi server still restart as 2323236 with a network that still worked.

  
  

  Any other suggestions would be greatly appreciated without having to reconfigure the settings of ESXi and the configuration of the switch distributed from scratch.
  

  According to the recipe of HP/VMware here: http://vibsdepot.hp.com/hpq/recipes/HP-VMware-Recipe.pdf

  There is a note about the NC551i:

  

  / Rubeck

• Configuration of VLAN for vMotion (ESXi 5.1 update 3)

  Hello

  We use a cluster of ESXi 5.1 updated 3 guests with Enterprise Edition.

  Finally, our network is being upgraded and VLAN will be created for vMotion.  Currently, we use the local network for the management and vMotion (I know that's not good).

  Network administrator asks me to provide information concerning the requirement of the VLAN for vMotion.

  Is there any Document KB I can refer to mentioning that the administrator must put in place in the physical switch and I need to change in each vSwitch for vMotion on all ESXi hosts?

  Thank you

  Belong to your network administrator if it can link your vmotion IP to the same vlan that he will provide den it's possible.

  Otherwise, you will have to go to the configuration of your network administrator. so it can provide you the IP for the ports of vmotion.

• ISO bootable ESXi 5.1 update 3

  It's going to be an ISO bootable ESXi 5.1 update 3 released? At the moment the current download the site is ESXi 5.1 update 2.

  Looks ok to me: https://my.vmware.com/web/vmware/details?productId=285&downloadGroup=VCL-VSP510-ESXI-51U3

• Red Hat Enterprise Linux 7 guests in ESXi 5.5 Update 1

  The Guest OS Installation Guide indicates that RHEL 7 guests are supported with ESXi 5.5 Update 1 but RHEL 7 does not appear as a guest operating system during the construction of a new virtual machine. I built a virtual 7 of RHEL machine by selecting the operating system 64-bit RHEL 6 asked and have not had any problems. Anyone had a similar experience?

  I tried this in my lab and I see the same thing.

  Selection of RHEL 7 as guest operating system is available in the Web Client. See screenshot below

  

• Update ESXi 4.1 Build 260247 to ESXi 4.1 Update 3

  Hello

  I want to update a stand-alone host to ESXi 4.1 Update 3. I don't have vCenter or VUM in the environment (yet). I downloaded the bundle "update - from - esxi4.1 - 4.1_update03.zip" and have the vSphere CLI installed on my workstation.

  I use vihostupdate.pl to check the server and the applicability of the patch before I go and install and he seems to think there is nothing there to install.

  From what I can tell, this is a cumulative update and I have not read anywhere that I need to install the update 1 or 2 update as a prerequisite, so why are they not those detected?

  Here is the output from the various controls:

  vihostupdate.pl - servername - list - package update - server-esxi4.1 - 4.1_update03.zip
  Enter the user name: root
  Enter the password:

  -Bulletin ID - summary-
  ESXi410-201208101-SG ESXi 4.1 Firmware updates
  ESXi410-201208102-SG updates the ESXi 4.1 tools
  ESXi410-201208201-UG is updating the Firmware of ESXi 4.1
  ESXi410-201208202-UG updates tools ESXi 4.1
  Full ESXi410 - Update03 VMware ESXi 4.1 update 3

  vihostupdate.pl - servername - analysis - package update - server-esxi4.1 - 4.1_update03.zip
  Enter the user name: root
  Enter the password:
  Reports that apply to the but are not yet installed on the ESX host are listed.

  -Bulletin ID - summary-

  Hello

  Use this article to upgrade

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1002368&sliceId=1&docTypeID=DT_KB_1_1&dialogID=555350364&StateID=1%200%20555362320

  Concerning

  Mohammed

• ESXi 5.0 Update 1 with view Mode Local

  I have problems using view Mode Local with ESXi 5.0 Update 1. When I try to go on the computer I get the following error, "this office cannot be extracted. The client does not support hardware version of the virtual machine. "We use View 5.0.1 Build-640055. At first I thought the View Client provided by the display server had not caught up with the hardware version of 5.0 update 1, so I downloaded and installed View Client 5.1.0 Build-704644 and I still get the same message. If someone could provide no indication about this it would be greatly appreciated. Thank you.

  8 Virtual material could not be used with 5.0 and local mode view.

  Upgrade in 5.1 mode

  Thread moved view area.