ESXi 4.1 connection NIC 0 to NIC 2 to a Port DHCP and static IP address

Similar Questions

• Maximization of double connection NIC to boost performance on ESXi vSwitch

  Hi all

  I was wondering if I could useboth NIC connection at the same time to boost performance?

  in the attached screenshot one is currently disabled? I use ESXi 4 with the latest patch and it's Dell Power Edge 2950 - III Broadcom NetXtreme II NICS and Intel Pro 1000 MT with TOE NIC.

  all cables Cat6 and address IP currently assigned to this host ESXi is one.

  any kind of suggestion and comments would be greatly appreciated.

  Thank you.

  Kind regards

  AWT

  So overall, you have 4 nic dedicated to the movement of SAN 2 and 2 configured on the console Service, VMoption and LAN traffic (in active Passive).

  Best practice is to separate the traffic of your management of your LAN traffic.

  With Layer 2 switches that I recommend that if you go to a single switch anyway, so you might as well dedicate a NIC to SC/vmotion and then spend the other card NETWORK LAN traffic.  This at least allows you to run backups on the SAN network (or make vmotions) without killing your Lan traffic (or vice versa).

  You could probably change the vswtch based on MAC address instead of virtual port and then make it active two NICs.  In this configuration, a virtual machine takes a NIC at boot time and still about it... basically giving you a few loadbalancing.

  I personally would probably go the way of its own for the LAN NETWORK card and the other card network for SC/Vmotion.

• Connect NICs VM

  Hello

  We had a power outaged yesterday on one of our DC. Unfortunately, all the virtual machines network cards appear to be turned off/disabled network device status and we did check one by one just to be sure.

  Asked if there will be a single powercli script that will make things:

  1. get the name of the cluster

  2. get VMs with unchecked network adapter {}Set-NetworkAdapter -Connected:$false}

  3. set the virtual machine network adapter connected

  4. pull out a report to csv format.

  It will be a great help.

  Here are some cli a liner.

  -------------------------------------------------------------------------------

  Unplug the adapter on a Virtual Machine

  Get-VM -Name $VM_Name | Get-NetworkAdapter | Set-NetworkAdapter -Connected:$false

  Connect the adapter to a Virtual Machine

  Get-VM -Name $VM_Name | Get-NetworkAdapter | Set-NetworkAdapter -Connected:$true

  Connection status on the virtual machines network adapters

  Get-VM | Get-NetworkAdapter | Select-Object Parent,ConnectionState

  Be limited to a specific cluster, you could do

  $clusterName = Read-Host -Prompt "Cluster name" $cluster = Get-Cluster -Name $clusterName $nics = Get-VM -Location $cluster | Get-NetworkAdapter | where {!$_.ConnectionState.Connected}
  
  $nics | Set-NetworkAdapter -Connected:$true -Confirm:$false $nics | Select @{N="VM";E={$_.Parent.Name}},Name | Export-Csv c:\report.csv -NoTypeInformation -UseCulture
  

  And for a specific folder, you could do

  $folderName = Read-Host -Prompt "Folder name" $folder = Get-Folder -Name $folderName
  $nics = Get-VM -Location $folder | Get-NetworkAdapter | where {!$_.ConnectionState.Connected}
  
  $nics | Set-NetworkAdapter -Connected:$true -Confirm:$false
  $nics | Select @{N="VM";E={$_.Parent.Name}},Name | Export-Csv c:\report.csv -NoTypeInformation -UseCulture
  

  If the concept every time the same, you limit the Get - VM using the location parameter

• CentOS 6 under ESXi 5.0 - no NIC (eth0)

  All-

  I just installed 6 64-bit CentOS and I'm unable to add an adapter network correctly. I've tried using E1000, VMXNET2 and VMXNET3.  I tried to add all 3 at once, and none appears when I type ifconfig.  Only loopback is displayed.

  Anyone have any ideas on what I should do? I thought I need to use yum to install vmware tools can help, but I have no internet connection.

  Thanks in advance!

  If you use dhcp on your network, run the follow command:

  eth0 - v #dhclient

  If you use the static ip address, run the follow command:

  #ifconfig eth0 IPADDRESS

  for example:

  eth0 192.168.0.1 #ifconfig

• 5.1 ESXi management no connectivity network with two network adapters connected

  IBM H chassis equipped with blades HS22

  Blades use Broadcom 5709 s dual gigabit NIC

  ESXi 5.0, system worked very well with both NICs connected (static IP) in network management parameters (able to ping in and out). Completed the upgrade to ESXi 5.1 preserving VMFS datastore. After the reboot, management network shows two NICs connected to static IP always assigned but I have not any (impossible in our out ping) network connectivity. If I disable one of the network cards and restart the management network, I can immediately ping inside and out.

  I took a spare blade and tested by passage of 5.0 to 5.1 and 5.1 installation clean, the two producers same results. A host with two active network cards 5.0 (if static IP or DHCP) can ping inside and out. A host with two active network cards 5.1 (if static IP or DHCP) can not ping in our out. 5.1 host cannot obtain DHCP address, but fails to APIPA.

  I found the problem. For some reason, both switches must be actively connected on the same network for observed networks provide correct information for the collection.

• Network (NIC) card does not work with DHCP or static IP

  Hi, I have a ThinkCentre M70e (0809-C6S) with a problem in the network card. The link led is on and Windows detects that a cable has been connected. But the network can not aquire a DHCP lease and does not work with the static IP address. I uninstalled the antivirus and tested nothing helps network booting. The same connecting cable to another PC, works great. If the NIC has been "burned"? Thanks Oliver

  Thanks will check the power settings too. But I solved this problem by: - antivirus uninstall - uninstall the card NETWORK Marvell driver - reboot - disable NETWORK card in the BIOS - turn off PC - turn on the NETWORK adapter in the BIOS - install the downloaded in another PC Marvell NIC driver - antivirus install now the NETWORK card works again! Best regards, Oliver

• Weird, NIC is not getting an IP address from the DHCP server, but when you set a static IP address of works...

  Someone at - it will meet it before? Of course it is in a LAB environment, but what a Win 2012R2 VM is simply not cooperate... lol

  I tried to vMotion there something hot but even. Other virtual machines, 2008 R2 can obtain a static IP address fine as well as works fine. It is the only 2012R2 VM in the LABORATORY.

  No 'ghosts' NIC or whatever it is. It's a new generation of machine virtual Windows.

  Thank you

  EDIT:

  I use the VMXNET3 card.

  Figured it out. Someone added an IP in DHCP address range rule "out for delivery" and they used the whole range of... lol

• Every time I connect to my windows user takes awhile so it starts and then hangs / freezes

  My laptop does not load. It starts normal and when I connect it takes 3 min just to show the wallpaper and just when everything seems to freeze. I get messages like "0xc0000006 failed, something igftray blah blah blah." There is also another for itunes/quicktime "(cela n'arrive parfois, selon si j'ai même arriver à obtenir pour le papier peint. Parfois il se fige/accidents avant) I can boot into safe mode [I am currently in safe mode] also, I tried to go into Device Manager and there is a warning sign next to ISATAP map." Looked this up and stays, it can be ignored. I tried to restore to a previous point, but for some strange reason, it does not show me when I go back. As soon as I click 'Restore' the computer starts and that I need to log in to the screen. \
  Things I've done recently to the laptop: I tried to put in a new stick of RAM, but the computer won't start so I took and how it was left. This may be the problem.
  The computer does not beep or anything. It is not just to load windows. The furtherest I got me I open Google Chrome but then it froze and the screen has decided to go black. Not empty, the screen was always on but he showed all black. Showed no mouse or whatever it is.
  Please help me because I have to take the plane in less than 8 hours and I NEED to take this laptop with me
  It's a Toshiba Satellite a205-s5880, Vista, 2 GB of RAM atm. Aries is for this type of computer I brought it critical judgment.
  * Whenever the laptop freezes / crashes, the sound of the RAM or what call makes a model/beat.
  I know this sounds childish but I have no idea on how to fix computers, so I gave it my best shot to explain what the problem is.
  IF I PUT THIS IN THE WRONG SECTION PLEASE MOVE IT TO THE RIGHT ONE *.
  Thank you very much.

  Hello

  After checking the above and according to the needs:

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  above is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Ubuntu not guest no internet connection when a static ip address is assigned to host windows 7

  Good day/night everyone

  I really need help;

  I am running vmware workstation 9 Windows 7, my guest OS is ubuntu 12.10.

  I'm able to get to the internet when you use the dhcp on my NETWORK (host) card, but can't go anywhere by using a static ip address on the same NIC...

  What settings should I use in order to have working...

  Thank you in advance...

  Doesn't look like to me your /etc/resolv.conf file has been loaded correctly. I don't see your name in there servers.

  Assuming you can get ping on Internet via IP (i.e. use 74.125.140.102 to ping or connect to Google).

  I think I'll try editing this file (like su) and adding:

  nameserver A.B.C.z

  nameserver 8.8.8.8

  It will get overwritten the next time that you start but will allow you to test.

  Mine looks like this:

  # Glibc resolver (3) generated by resolvconf (8) in the file /etc/resolv.conf Dynamics (5)
  # DO NOT EDIT THIS FILE BY HAND--YOUR CHANGES WILL BE OVERWRITTEN
  # OpenDNS rescue (configured by Linux Mint in etc/resolvconf/resolv.conf.d/tail).
  Nameservers 208.67.222.222
  NameServer 208.67.220.220

  Lou

• ESXi 4.1 DHCP and Mac address problem

  I'll put up my new hosts ESXi 4.1 using reserved IP address of the DHCP server

  Linking the ip address to the mac address of the host.

  The mac address is related to the physical NETWORK card mac address.

  When I don't see NIC 0 and NIC 1 resumes, guests will receive a different IP address.

  How can I solve this problem?

  Thank you

  This is a Ko for this problem.

  I hope that you ENT + licenses to use the profiles of the host.

  Will save time

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1025886

  concerning

  Please award points if you find this useful or correct

• need to configure a connection wireless network with static IP address to make a panasonic wireless display of work on the virtual machine

  Hi, I'm new to macs and Fusion. I have a MacBook Pro 13 mid-2009, running 10.5.7 and Fusion 2.0.5, running Win XP Pro SP3 as the virtual machine (not in a bootcamp partition separate). I added a second network as a bridged network adapter (first one is set to NAT). I'm trying to connect my wireless panasonic (802 11b) to the virtual machine display, as I do on my old sony PC. Normally, I turn on the wireless on the PC, find the network wireless in Win XP and configure my SSID and necessary of static IP address and configure the NIC to search only ad-hoc connections (non-infrastructure). I also turn off the firewall so that it can work. There is a panasonic program runs on the PC (which I also installed on the virtual machine) makes it all happen once I have the connection. So the place that seems to be stuck, it's that I can't find a wireless to configure network adapter since--what the VM is a NA standard, so there is no place to specify the SSID, ad-hoc and disable the WEP key. Someone has ideas how to go beyond my current state?

  In addition, the panasonic only works at 800 x 600 for the display resolution, so it will automatically change the graphics settings. I guess that's not a problem on the VM, but thought I would ask in advance in case someone sees a problem with it.

  Thank you very much.

  Larry

  If the only way you can connect to the device is via WiFi, then you will need to provide your own WiFi USB network adapter to the virtual machine because Fusion presents only the network card Ethernet wired to the Virtual Machine, regardless of the host network adapter is the main map.

• How do you define a static IP address on an iPad Pro ethernet connection?

  How do you define a static IP address on an iPad Pro ethernet connection?  I use an ethernet USB adapter connected and lightning for USB adapter and it works very well for DHCP connections.  I'm at my lack of something?

  You can't control these things on an iPad, I'm sorry to tell you that.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• When you connect to YouTube it asks to connect to iTunes, but I'm already logged on iTunes and is not recognize my password?

  When you connect to YouTube it asks to connect to iTunes, but I'm already logged on iTunes and is not recognize my password?

  Already logaged in many applications on the Apple id and password correct ipad I'm when it asks for it is not to recognize the password. ?

• trying to connect my Pantech P9050 phone on computer to download images and it keeps failing

  trying to connect my Pantech P9050 phone on computer to download images and it keeps failing suggestions?

  Hello

  1. what operating system is installed on your computer?

  2. it linked earlier? If so, remember you have changed your computer?

  3. you receive an error message?

  4. what exactly happens when you connect your phone?

  Provide more information to solve problems. Refer to this article How to ask the question: http://support.microsoft.com/kb/555375

  You can also post your questions in the forum of Pantech: http://forums.att.com/t5/Pantech/bd-p/Pantech