Similar Questions

• Configuration guide for ESXi 5 (Vmnetwork, management and vMotion) with NIC 2 network

  Hello

  I have 4 NIC in Server Blade 7 (ESXI 5), would like to dedecate 2 NIC for (Vmnetwork, management and vMotion) & NIC (iSCSI traffic) 2 with equallogic SAN.

  I equallogic guide to configure ESXI with it, but how do I configure (Vmnetwork, management and vMotion) with NIC 2, my priority is excellent speed for my virtual machine, and then nothing else.

  Then just go for classic switch.

  The configuration is a lot depend on existing infra, the trunk, the physical switch for redundant network & balance, 100 or network 1GbE, no.. virtual machines and etc. If there is a new configuration, I suggest you trunk 2 x available vmnic (the vm network) to balance the load and better performance.

• Compellent Replay Manager and VSS

  Hi all

  I am a new user of Replay Manager and I'm testing inside and sandbox environment.

  I installed Replay Manager Services 7.0 on a physical Windows 2003 R2 x 64 server and tried to program in accordance with replays of the management tools Manager Replay--> all work perfectly.

  But this server is also supported by our company backup tool: Symantec Backup Exec 2010 R3. I noticed that whenever a VSS backup is initiated by BackupExec, a coherent reading is done on the HDS. Is this normal? Can disable us this behavior?

  Thanks in advance,

  Kind regards.

  Teo.

  Finally, I found the solution:

  Symantec Backup Exec Agent installed on windows system has a default setting to choose the right provider VSS: this parameter is 'automatic selection '.

  With this automatic selection, the agent chooses the VSS provider Replay Compellent, instead of the microsoft VSS provider service. And so, the backup exec task triggers a replay on the Compellent storage system!

  Solution: change the task parameter to force 'Microsoft's VSS provider' instead of 'automatic selection '.

• Management and vMotion have the same IP address

  Being quite new to ESXi I have spent hours to deceive and reading and do not understand why my management and vMotion interfaces have the same IP.

  The configuration is the following:

  Cisco UCS blades

  8 cards per blade

  vmnic0 and 1 - management

  vmnic2 and 3 - vmotion

  vmnic4 and 5 - IP storage

  given the VM vmnic6 and 7-

  I installed and the management network has migrated to a DVS without issues.

  Now when I create the DVS/port group for vmotion and assign the IP address I met 2 problems as you can see in the screenshot attached the blade/network.

  Thanks for any info.

  P.S., Management and vMotion are on different networks.

  Yes, the ESXi host may have a default gateway. It is used only when a vmkernel must be routed traffic.

  In the case of vMotion - as long as your vMotion enabled vmkernels are all on the same subnet and VLAN, the default gateway will never serve.

• Configuration Manager Manager and update

  Hi all

  What is the difference between Configuration Manager and Update Manager?

  Thank you

  Djamel

  Hello

  They are certainly different products from Troy, but both have their uses for security. VUM is necessary to determine the status of patches and fixes, while configuration manager will monitor your systems configuration drift (to some extent) is Host Profiles. But Config Manager monitors your systems for both compliance issues.

  The two types of tools are necessary for good security.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• Can I use ESXi 4.1 for my hosts and VCenter 4.0? Or these versions must match?

  Can I use ESXi 4.1 for my hosts and VCenter 4.0? Or these versions must match?

  Thank you

  vCenter must be version 4.1 (and on a 64-bit platform) to manage guests 4.1

• Agent of Enterprise Manager

  Hi friends,
  
  I installed Oracle RAC(10gr2 10.2.0.4) server with two nodes on HP - UX 11.31 Itanium servers.
  
  I have a problem with agent enterprise manager in the second node. When I try to go tells me that the agent is in place and check its status is not running.
  
  I noticed several alerts:
  
  emagent.trc: Nothing, the file is huge, empty with blank fields.
  
  emdctl.TRC:
  
  2011-02-24 15:34:59 Thread - 1 BOWL ssl: fd = 6, nmehlssl_write nzos_Write error = 28862
  2011-02-24 15:35:26 Thread - 1 BOWL ssl: fd = 6, nmehlssl_write nzos_Write error = 28862
  2011-02-24 15:35:34 wire-1 BOWL ssl: fd = 6, nmehlssl_write nzos_Write error = 28862
  2011-02-24 15:36:34 wire-1 BOWL ssl: fd = 6, nmehlssl_write nzos_Write error = 28862
  2011-02-24 15:37:35 Thread - 1 BOWL ssl: fd = 6, nmehlssl_write nzos_Write error = 28862
  2011-02-24 15:37:39 Thread - 1 BOWL ssl: fd = 6, nmehlssl_write nzos_Write error = 28862
  
  In the first node of the agent is in place and the Business Manager too.
  
  Any ideas?
  
  Kind regards
  
  Miguel Vega

  Miguel Vega wrote:
  Thank you

  Issues as the patches search confuses me, the patch is good for my database?, in detail:

  Database version: Oracle 10R2 (10.2.0.4) RAC 2 nodes

  Server: Itanium, HP - UX 11.31

  Enterprise Manager version: 10.2.0.4.0

  Agent version: 10.1.0.6.0

  Greetings

  The patch notes say "platform Patch for: credits".

• In older firefox if I stop firefox.exe to the Task Manager and start firefox it will restore all my open tabs, now it doesn't

  usually in the earlier version as 28, so I end the process "firefox.exe" task manager and run back the firefox, it will restore the tabs normally I opened (websites that I had until I stop the firefox.exe)
  But now that more recent versions, not give me this feature, restore session screen becomes white and I drop my open sessions.
  I have to use the history to restore the sessions that I lost,

  Please can someone take a look at this problem, it would be an interesting option to stop the firefox.exe in the Manager of tasks and able to restore all the sessions again

  I have attached a picture for your information

  Thank you
  regarding

  Unfortunately the image have no download, but there are built in the back of the inverter session. If these do not work correctly, we are happy to investigate.

  • The problems of Firefox in Mode safe

  However, there is an addon that helps with backups called session manager Session.

• I have install an add-on for Firefox, but it does not appear in my list of Add-ons Manager, and after I restarted Firefox, it went.

  I try to install 1-Click Youtube Video dDownloader, which is supposed to add a download button to Yuotube video pages. I go here:

  https://addons.Mozilla.org/en-us/Firefox/addon/1-click-YouTube-video-download/

  and I click 'add to Firefox '. It gives me the window "install now". I click on 'Install now' and it is said that Firefox has to restart and it will be installed when Firefox opens again. If I click "Restart now" and restart Firefox. Then I go on Youtube, but no button. I check the page of the Add-ons Manager, and I see that it is installed in the extensions. So, if I go to the page and click 'Add to Firefox' once again and restart once again, go to Youtube, the download button IS there, and it works perfectly. But if I exit and restart Firefox, the download button is once again absent, but the extension is always installed. Why this extension works only when I restart twice, and then it disappears again?

  When the button does not appear, but the extension is marked as active, try to reload the page to Youtube without using the cache by pressing command + shift + r to see if that triggers the extension to insert the button.

  If it remains inconsistent, I would like to ask the developer to Add on to their Contact page: http://www.clickvideodownload.com/contact.php

• Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  and I don't know that if Apple make a system more freely, there no need for any device on Earth but iPhone.

  http://www.Apple.com/feedback/

• I just added a "Add Manager" and now I can't find it anywhere, he hides or IM just not at the right place? Please help, thanks

  I downloaded 'Slims add on Manager' and now I can't find it anywhere.

  {Ctrl + Shift + A}

• FF 8 causes flash to not however with load after you open the Task Manager and open the plugin container folder, everything works fine

  New upgrade FF and all the flash based video site does not load and makes computer almost hang. After I open the Task Manager and go to the folder where is the plugin container, everything works back. I don't do anything at all after opening the folder.

  What kind of error is it? Its very strange. If all goes well, there is a fix for this.

  Another method would be to uninstall FF and install FF8.0 and not use the upgrade FF7.0. It worked for me.

• I looked in the addons Manager and I seem to have 5 versions of java installed console, do I have all or can I disable all, but later?

  I see 5 versions of the java console addons, 6.0.04, 6.0.07, 6.0.10 6.0.12 Manager and 6.0.14.Do I need all these or should I disable all, but later?

  If properly uninstalled plugins for Adobe Reader and Foxit Reader should also uninstalled in the process.

  Be careful with the Windows registry, unless you know what you're doing.

  • Always back up the registry to another source; not the current hard drive.
  • Use a program that will offer to back up the registry keys that you delete.
  • Always have a boot disk (CD/DVD, USB key) just in case you make a mistake.

  You can use Windows search to locate the plugin files and delete them if they are on your hard drive and leave the single registry. Find and delete the following files while Firefox is completely closed. After you delete the files, launch Firefox, look at your plugins, addons > Plugins, to see if the two plugins are gone.

  • The Adobe Reader plugin name: nppdf32.dll
  • Foxit Reader plugin name: npFoxitReaderPlugin.dll

  A few links for you to watch:

  1. Foxit Reader:
     • http://www.foxitsoftware.com/support/showfaq_technical.htm
  2. Adobe Reader:
     • http://kb2.Adobe.com/CPS/400/kb400769.html
     • http://www.Adobe.com/cfusion/search/index.cfm
     • http://kb2.Adobe.com/CPS/836/cpsid_83690.html

• I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF.

  I had some problems with my pc, since then when I close Firefox it would not reopen unless I go to Task Manager and end the process for FF. I uninstalled FF and re-installed and no change.
  Walt

  I have a same problem.

• Satellite Pro L300: WLAN isn't in Device Manager and is missing

  Hello

  I have a Toshiba L300 which I've downgraded from Vista to months ago WXP. So I decided to stay with Vista and when I installed Vista the WLAN was missing in Device Manager and it didn't work. I tried to download drivers Toshiba download drivers adapters and don't always work. Only my Ethernet is showing in Manager device... btw, I have a Realtek WLAN

  Also, my VGA graphics card didn't seem to update driver and when it does it is said that the system is below minimum specifications.
  It's so weird in Windows XP Home edition, it was working fine... All solutions?

  > I tried to download drivers Toshiba download drivers adapters and don't always work.
  Does that mean exactly? Have you installed driver WLAN or not? Wireless network adapter correctly installed and listed in device as a card Realtek WLAN Manager?
  How do understand you?
  You have problems to install the wireless network adapter or configure the WIFI connection?

  If the wireless network adapter is installed correctly activate the card with the WLAN switch and then use the FN + F8 key combination and make sure card is set on IT.

  Which driver to install display? What version?