ESXi 4 stop with data recovery 1

Similar Questions

• ESXi 4.1 + VMware Data Recovery 1.2 (without vCenter)

  Hello

  I installed VMware Data Recovery 1.2 on my ESXi 4.1 and when I connect to VMware Data Recovery I get the message "connected to the ESX Server, automatic backups will not be made.

  This means that scheduled backups only work if I receive vCenter? I without vCenter run backups manually?

  That is right. vDR is configured to discover your VM inventory via vCenter. The vDR is designed to provide a central interface for your VM backup/restore via vCenter.  The cool thing about this is that vDR keep track of your virtual machines if you transfer them via vMotion, HA, DRS, etc. But, Yes, you NEED vCenter.

  ___________________

  A +, EASD, MCP, MCSA, MCSE, MCTS, MCITP, MCDBA, NCDA, VCP4

  If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.

• Backup VM "outside the field" with data recovery?

  Hello

  When I try to make a backup of Virtual Machine for the domain, I get the following error:

  "error 3960 - (cannot suspend virtual machine).

  VMTools are installed properly, and the other series of properly backup jobs.

  I think it is the problem is with the VSS service, and user... more, this virtual machines are in DMZ, but FW does not blook no matter what connection.

  Any suggestion on this subject?

  Best regards

  Pedro Velasco

  Tarragona, Spain

  We have solved the same problem with this procedure:

  http://www.Petri.co.il/forums/ShowPost.php?p=186408&postcount=2

  If this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

• Data recovery backup job fails with error-3902

  Version of the device - 1.2.0.1131

  Data store - cifs datastore - 489 gb

  Number of backup VMS - 26

  Average size vm - 25 GB

  Question I get is "unable to create snaptshot for vmnamehere, error-3902 (file error)."

  I tried ping all the esx host, which works very well, as well as vcenter host, very much so.  I put the esx hosts and vcenter host in/etc/hosts file too.

  I restarted the vdr unit that works very well.

  I can take snapshots of the virtual machines manually as well.

  Backups have worked on those virtual machines in the past and just stopped all of a sudden.

  Integrity controls work.

  What else can I try?

  Post edited by: kdon

  If money is not a problem I suggest go for vRanger veeam backup or connection of quest. It removes all the headaches I have with data recovery.

• Full VM data recovery or just snapshots?

  Hi people,

  I'm really in doubt on this subject.

  I started a job to backup with approximately 20 virtual machines, and after a while, when it finished I checked the ocupied backup size. Then I surprised because the size of the entire backup was only 64GB, and the storage space total occupied by all virtual machines is about 1 TB.

  
  So, how can I do a full backup vm?

  Example/Question: If I lost the entire data store where my vm running (one really disaster), I can restore my vm with data recovery (with backups stored in the other data store)?

  Kind regards

  sm4rtins.

  I don't know what help I can be, because my main experience with VDR is full of episodes of frustration. It could have been a reasonable product, but it seems to be deliberately crippled, and although version 2 is much more stable than the 1.x version (we meet only a few points of restore damaged about once a month or more, and not twice a week), it's always make us nervous.

  The only thing I would say is that we use fast SAN storage for destinations. VDR doesn't seem to be sensitive to the speed of disk I/O, and my assumption is that we get a restore point damaged when the disk i/o on the SAN is high (the SAN is shared with about 40 virtual machines and several physical servers that use for cluster storage databases). We do not have the data to back up this hypothesis (still trying to get a handle on how I'd get I/O stats to prove), but I don't see what it might be (other than the product being simply bugged, which might be the case).

  Could you move your store of destination from NFS to a fast SAN, just to see if the error rate?

• Deduplication before vSphere VMware data recovery 4

  Hi people,

  I decided to give a try to the Vmware Data Recovery product. I have recently updated our 3.5 ESX to vSphere 4. I installed the plugin for recovering data and the device, and I think that it does not work as it is supposed to, but I have a question.

  I read the documentation about the product to recover data and on page 8 of the admin guide, there is a note on the optimizations not applied to virtual machines created with vmware vSphere products 4.

  I vmotioned my machines windows and upgarded their vmware tools and equipment of 7 virtual machine. I was wondering these machines were created with ESX 3.5 and now that I've migrated to vSphere 4, doesn't that mean that deduplication will not take place with data recovery products when I'm in my data store backup? or am I misunderstanding this?

  Thank you.

  Hello and welcome to the forums.

  Once you upgrade older VMS v4 to v7 hardware virtual machine, then they are the same.  Discover the answer of amina in this discussion.

  Good luck!

• Data recovery for backup ESX4

  I already do the backup to the LUN with 'Data Recovery '. Is it possible for me to complete the data in the LUN to the tape recorder. BTW, could someone tell me what the DR uses for backup? Is - this mode of SAN or NBD?

  Is it possible for me to complete the data in the LUN to the recorder

  In its current form, no.  IF you use a vmdk for the target of the VDR, you always have to copy this vmdk in tap somehow drive... There is no way to archive data still... I'm sure that VM ware is working on this, but seeing as how VDR is always 1.0... It could be a year or two before we see this mature at this point.

  Take the name, the more sinister than the backup.  This is an archive of the reserve, not long term.

  Is - this mode of SAN or NBD?

  Both.  I found out today that if you put a VDR in a datacenter, and your VM of in a different datacenter these backups will be the network.  If VDR is unable to access the vmdk he tries to backup, you will also get a network backup.

  HE reconfigures the VM, add the disk to the VM VDR and makes local, so that the data (add min scsi) local to the machine virtual and copied via the San, because it is mounted.  He's trying SAN first, then he resorts to the network.

  So I think you need to do so that the LUNS are visible on the ESX host where the VDR, so that it can correctly 'see' the VMs for SAN backup.

• Satellite M70 - 350 - recovery disk stopped with black screen

  Hello

  I tried my laptop with the original recovery CD or DVD recovery. He just stopped with the black screen and the error message.

  After that, I tried the advanced recovery mode. By selecting the ghost Image, which gave me the Image corrupt error.

  Weird enough even installing from an original CD of Windows fails. With that before even I can select something, I get a black screen with a blinking cursor. Appers whil the windows cd is loading drivers.
  At the bottom of the screen, there are that many drivers listed one after the other. The last thing mentioned here before the blinking cursor is Partition NTFS.

  Cause the original recovery disc has already deleted all the contend on the laptop it's usless now.

  Any ideas what the problem might be?

  I also think that there is a problem with the HARD drive.
  If possible, try to get a new one and try installing the OS using recovery media again.

  Do you use DVDs of recovery for the first time?

• Pavilion dm4 2191us: restoring a backup made with HP Recovery Manager - data recovery manager has since been removed

  My system (portable Pavilion dm4, Win 7 Home Premium x 64)) is works well but I would like to restore a backup of data made with HP Recovery Manager. HP Recovery Manager has since been removed from the system and I don't have a recovery disk. I tried to install sp45415 that supposedly runs a silent installation for the Recovery Manager program, but it fails silently on my system. The notes say that it applies to Windows 7 computers and the Pavilion dm1 and dm3. There is no mention of the dm4.

  Y at - there a trick to getting sp45415 to work properly?

  Y at - it somewhere that I can download an installation package for HP Recovery Manager that works on the Pavilion dm4?

  Is there another tool that can restore the backup made by HP Recovery Manager?

  Thank you!

  If you have uninstalled Recovery Manager he probably removed the recovery of files in the recovery partition. When these files are not deleted download Recovery Manager will install. You will need a recovery media to boot from to restore the files and the recovery partition. If you do not have a recovery media you order from HP.

  As for the files you are trying to restore - if it's a backup of personal files, photos, etc. to the outside hard disk or DVD must be a file .exe inside these files, probably of Restore.exe or Recover.exe. Double click on the .exe will extract files to a folder on the hard drive of your laptop.

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I reinstall / store data recovery an ESXi 4.1 lost during an upgrade to 5.5?

  I was running a host of ESXi 4.1 on a Dell T110 II with two RAID, a managed arrays by the controller integrated RAID that contained the system of ESXi and a small data store (channel) and the other controlled by a 6405e Adaptec controller which contained my main data store (BunkerHill). In the process of upgrading from 4.1 to ESXi 5.5, I forgot to include the drivers for the Adaptec 6405e controller and even if the upgrade of the host, he did not see the BunkerHill data store.

  I downloaded and installed the VIB for the controller 6405e and after restart the host ESXi 5.5 shows the Adaptec RAID under storage adapters, but the BunkerHill data store is still not visible and all virtual machines guests appearing on this show as unknown in the inventory. The channel data store and two invited VMS it holds are visible. Below a part of the kernel log is filtered on the RAID controller device name.

  I would like to get the recognizable BunkerHill data store before continuing the upgrade and would be grateful if someone could point me in the right direction (KB article, display, etc. that explains what I do). I need to reinstall 4.1 on the work of RAID (ESXi 5.5 and channel data bank) and then trying to reconnect the main data store, or are there changes I can do from the console to manually get the market things?

  Tips are appreciated,

  Thank you

  
  

  rSid

  (2015 06-16 T 03: 39:59.758Z cpu1:33296) PCI: 1095: 0000:03:00.0 named "vmhba2" (has ")

  (2015 06-16 T 03: 40:08.781Z cpu0:33415) VMK_PCI: 395: 0000:03:00.0 device name: vmhba2

  (2015 06-16 T 03: 40:08.781Z cpu0:33415) DMA: 612: DMA 'vmhba2' engine, created using the Mapper "DMANull."

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiScan: 976: path 'vmhba2:C0:T0:L0': seller: model "Adaptec": "BukerHill" Rev: 'V1.0 '.

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiScan: 979: path "vmhba2:C0:T0:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiScan: 1105: path 'vmhba2:C0:T0:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:08.782Z cpu0:33415) ScsiScan: 1503: Add the path: vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:09.238Z cpu1:33415) ScsiNpiv: 1510: GetInfo for adapter vmhba2, [0x4108984b0280], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  (2015 06-16 T 03: 40:19.582Z cpu2:33177) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba2:C0:T0:L0 '.

  (2015 06-16 T 03: 40:19.596Z cpu0:33177) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 40:19.596Z cpu0:33177) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:19.596Z cpu0:33177) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba2:C0:T0:L0 for the device "unregistered".

  (2015 06-16 T 03: 40:19.596Z cpu3:33177) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:19.596Z cpu3:33177) ScsiDeviceIO: 7420: get VPD 83 inquiry for device "mpx.vmhba2:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2015 06-16 T 03: 40:19.596Z cpu3:33177) ScsiDeviceIO: 7456: get VPD 86 inquiry for device "mpx.vmhba2:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2015 06-16 T 03: 40:19.596Z cpu3:33177) ScsiDeviceIO: 6170: QErr setting for mpx.vmhba2:C0:T0:L0 of the unit could not detect. Failure of the error.

  (2015 06-16 T 03: 40:19.839Z cpu3:33177) SFS: 5091: pilot no. FS claimed device 'mpx.vmhba2:C0:T0:L0:1': not supported

  (2015 06-16 T 03: 40:19.839Z cpu3:33177) ScsiDevice: 3443: device successfully registered "mpx.vmhba2:C0:T0:L0" from plugin "NMP" of type 0

  (2015 06-16 T 03: 40:24.005Z cpu0:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:24.352Z cpu0:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:24.676Z cpu0:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:29.840Z cpu0:33780) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:29.990Z cpu0:33785) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:30.177Z cpu0:32908) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 40:30.177Z cpu0:32908) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 40:30.194Z cpu2:33786) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:36.672Z cpu3:34032) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 40:41.839Z cpu2:32787) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8089cdc0, 34344) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 03: 40:41.839Z cpu2:32787) ScsiDeviceIO: 2338: Cmd (0x412e8089cdc0) 0 x 85, CmdSN 0x0 34344 to dev 'mpx.vmhba2:C0:T0:L0' world not a sense H:0 x D:0 x 2 P:0 x 0 0 data not valid: 0 x 5 0x20 0x0.

  (2015 06-16 T 03: 40:41.839Z cpu2:32787) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x4d (0x412e8089cdc0, 34344) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 03: 40:41.839Z cpu2:32787) ScsiDeviceIO: 2338: Cmd (0x412e8089cdc0) 0x4d, CmdSN 0x1 worldwide 34344 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 03: 42:04.870Z cpu1:32909 opID = affe9c27) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 42:04.870Z cpu0:32909 opID = affe9c27) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 42:04.939Z cpu2:34420 opID = f965f306) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 43:25.893Z cpu0:32907 opID = de9d40eb) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 43:25.894Z cpu0:32907 opID = de9d40eb) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 43:25.976Z cpu1:34414 opID = 12fa472c) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 03: 43:39.199Z cpu1:32906 opID = f8418990) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 03: 43:39.199Z cpu1:32906 opID = f8418990) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 03: 43:39.272Z cpu0:34043 opID = 8eb97c3d) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 32:43.729Z cpu1:33296) PCI: 1095: 0000:03:00.0 named "vmhba2" (has ")

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) VMK_PCI: 395: 0000:03:00.0 device name: vmhba2

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) DMA: 612: DMA 'vmhba2' engine, created using the Mapper "DMANull."

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiScan: 976: path 'vmhba2:C0:T0:L0': seller: model "Adaptec": "BukerHill" Rev: 'V1.0 '.

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiScan: 979: path "vmhba2:C0:T0:L0": Type: 0 x 0, rev ANSI: 2 TPGS: 0 (none)

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiScan: 1105: path 'vmhba2:C0:T0:L0': no standard UID: failure. ANSI version ' SCSI-2' (0x2).»

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 32:51.512Z cpu0:33415) ScsiScan: 1503: Add the path: vmhba2:C0:T0:L0

  (2015 06-16 T 04: 32:51.940Z cpu1:33415) ScsiNpiv: 1510: GetInfo for adapter vmhba2, [0x4108984b0280], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  (2015 06-16 T 04: 33:02.185Z cpu2:33177) ScsiPath: 4695: Plugin 'NMP' claimed path 'vmhba2:C0:T0:L0 '.

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) vmw_psp_fixed: psp_fixedSelectPathToActivateInt:479: changing current path from NONE to vmhba2:C0:T0:L0 for the device "unregistered".

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) ScsiDeviceIO: 7420: get VPD 83 inquiry for device "mpx.vmhba2:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2015 06-16 T 04: 33:02.199Z cpu0:33177) ScsiDeviceIO: 7456: get VPD 86 inquiry for device "mpx.vmhba2:C0:T0:L0" from Plugin "NMP" failed. Not supported

  (2015 06-16 T 04: 33:02.199Z cpu1:33177) ScsiDeviceIO: 6170: QErr setting for mpx.vmhba2:C0:T0:L0 of the unit could not detect. Failure of the error.

  (2015 06-16 T 04: 33:02.439Z cpu0:33177) SFS: 5091: pilot no. FS claimed device 'mpx.vmhba2:C0:T0:L0:1': not supported

  (2015 06-16 T 04: 33:02.439Z cpu0:33177) ScsiDevice: 3443: device successfully registered "mpx.vmhba2:C0:T0:L0" from plugin "NMP" of type 0

  (2015 06-16 T 04: 33:06.593Z cpu2:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:06.992Z cpu0:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:07.322Z cpu1:33177) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:12.467Z cpu2:33780) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:12.608Z cpu2:33785) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:12.791Z cpu1:32908) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 33:12.791Z cpu1:32908) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 33:12.807Z cpu0:33786) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:21.919Z cpu2:34032) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 33:27.109Z cpu2:32787) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8089db80, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 04: 33:27.109Z cpu2:32787) ScsiDeviceIO: 2338: Cmd (0x412e8089db80) 0 x 85, CmdSN 0x0 34335 to dev 'mpx.vmhba2:C0:T0:L0' world not a sense H:0 x D:0 x 2 P:0 x 0 0 data not valid: 0 x 5 0x20 0x0.

  (2015 06-16 T 04: 33:27.109Z cpu2:32787) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x4d (0x412e8089db80, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 04: 33:27.109Z cpu2:32787) ScsiDeviceIO: 2338: Cmd (0x412e8089db80) 0x4d, CmdSN 0x1 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 04: 54:09.845Z cpu0:32906 opID = 372194ec) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 54:09.845Z cpu0:32906 opID = 372194ec) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 54:36.638Z cpu1:32910 opID = 6037ca3e) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 54:36.638Z cpu1:32910 opID = 6037ca3e) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 54:36.713Z cpu0:34040 opID = 2ffcf7c7) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 04: 55:22.146Z cpu0:32909 opID = a7c2c9af) ScsiUid: 273: "vmhba2:C0:T0:L0" path does not support VPD device Id page.

  (2015 06-16 T 04: 55:22.146Z cpu0:32909 opID = a7c2c9af) VMWARE SCSI Id: Id for vmhba2:C0:T0:L0

  (2015 06-16 T 04: 55:22.218Z cpu3:34041 opID = c15706cb) LVM: 8389: found device mpx.vmhba2:C0:T0:L0:1 can get to be a snapshot:

  (2015 06-16 T 05: 03:27.938Z cpu0:32785) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8084d6c0, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 05: 03:27.938Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e8084d6c0) 0 x 85, CmdSN 0x3 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 03:27.938Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e8084d6c0) 0x4d, CmdSN 0x4 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 33:28.102Z cpu0:32785) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e80875440, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 05: 33:28.102Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e80875440) 0 x 85, CmdSN 0x6 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 33:28.102Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e80875440) 0x4d, CmdSN 0 x 7 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 50:56.541Z cpu0:47363) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 50:56.541Z cpu0:47363) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 50:56.541Z cpu0:47363) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 51:17.866Z cpu1:47425) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 51:17.866Z cpu1:47425) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 51:17.866Z cpu1:47425) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x10

  (2015 06-16 T 05: 52:04.275Z cpu2:32787) WARNING: ScsiDeviceIO: 1223: mpx.vmhba2:C0:T0:L0 camera performance has deteriorated. Latency of I/O increased value average of 414 microseconds to 13216 microseconds.

  (2015 06-16 T 05: 53:30.257Z cpu0:32785) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8083a380, 48445) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 05: 53:30.257Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e8083a380) 0 x 85, CmdSN 0x9 worldwide 48445 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  (2015 06-16 T 05: 53:30.257Z cpu0:32785) ScsiDeviceIO: 2338: Cmd (0x412e8083a380) 0x4d, CmdSN 0xa worldwide 48445 to dev 'mpx.vmhba2:C0:T0:L0' has no meaning H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.

  (2015 06-16 T 05: 58:07.182Z cpu2:49346) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 58:07.182Z cpu2:49346) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 58:07.183Z cpu2:49346) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x20

  (2015 06-16 T 05: 58:28.217Z cpu0:49408) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 58:28.217Z cpu0:49408) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 05: 58:28.217Z cpu0:49408) WARNING: ScsiDeviceIO: 7006: IEC device "mpx.vmhba2:C0:T0:L0" a bad ECODE page: 0x0

  (2015 06-16 T 06: 00:42.324Z cpu1:32786) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e8088b8c0, 50440) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 06: 00:42.324Z cpu1:32786) ScsiDeviceIO: 2338: Cmd (0x412e8088b8c0) 0 x 85, CmdSN 0xc worldwide 50440 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.

  (2015 06-16 T 06: 00:42.324Z cpu1:32786) ScsiDeviceIO: 2338: Cmd (0x412e8088b8c0) 0x4d, CmdSN 0xd worldwide 50440 to dev 'mpx.vmhba2:C0:T0:L0' has no meaning H:0 x 0 D:0 x 2 P:0 x 0 valid data: 0 x 5 0 20 x 0 x 0.

  (2015 06-16 T 06: 03:28.267Z cpu3:32788) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0 x 85 (0x412e80896800, 34335) dev 'mpx.vmhba2:C0:T0:L0' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2015 06-16 T 06: 03:28.267Z cpu3:32788) ScsiDeviceIO: 2338: Cmd (0x412e80896800) 0 x 85, CmdSN 0xf worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0 20 x 0 x 0.

  (2015 06-16 T 06: 03:28.267Z cpu3:32788) ScsiDeviceIO: 2338: Cmd (0x412e80896800) 0x4d, CmdSN 0x10 worldwide 34335 to dev 'mpx.vmhba2:C0:T0:L0' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 5 0x20 0x0.

  Hello

  looks like resignaturing volumes data store could help.

  Here is another discussion of a user to get similar errors: Vmware 5.5 Upgrade breaks access the VMFS data store (kind of)

  More information: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1011387 and literature vSphere Documentation Center

  cykVM

• PowerCLI defining politics NTP to "Start and stop with the host" in ESXi 5

  Would appreciate any help in the definition of the strategy NTP on ESXi 5 hosts 'start and stop with the host. My script is currently using the following:

  Get-VMHost MyEsx | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-policy "automatic."

  This sets up the NTP service in "start automatically if all ports are open and stop when all ports are closed.

  "When I cange to 'MyEsx Get-VMHost | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-political ' market / stop with host"" the following is returned:

  «The possible enumeration values are "auto, On, Off«»»»

  Anyone know of a way (in PowerCLI) of the set up for the 'start and stop with host?

  OK, then you should choose politics "on".

  These are the policy values and what they match.

  

  Like this

  Get-VMHost MyEsx | Get-VMHostService | where {$_.Key -eq "ntpd"} | Set-VMHostService -Policy On
  

• VmWare data recovery and work with independent labels

  I read on a forum: If you want to drive the snapshot of the virtual machine is not affected, in its properties, select the "independent". Moreover, if the virtual computer is 'Independent' disks, the snapshot cannot be included in his memory.

  There was a question if the readers to all virtual machines 'Independent', would work "VmWare Data recovery?

  I'm not sure about my discoveries. SO please don't take this as a solution to your problem. My conclusions are:

  When you start to take a vDR of backing up a virtual computer that is configured with an independent record, it will not be successful. As vDR is used to take a snapshot in order to perform the backup of a virtual computer. If the capture is here, Independent disks prevents taking snapshot.

  -GaneshNetworks-

• Backup integration with VMware Data Recovery (VDR) tape - how to guide

  Hi all

  It's just something I've had a lot of people ask me about this.

  Here is an article on using VDR tape backup. It's actually very simple, there is no rocket science here, but it might be useful to the have exposed again.

  Backup integration with VMware Data Recovery (VDR) tape

  http://xtravirt.com/xd10131

  Pete

  FWIW, I used your great white paper today, Peter, with a lot of success in testing applications third VDR.  Discovered VDR is actually much faster and easier to work, especially for the backup of NAS devices.  Thx for the link!

• After an automatic update of Windows and stop, Firefox does not remember my tabs open at startup. Better Privacy does interfere with Crash Recovery somehow?

  Better Privacy does interfere with Crash Recovery somehow? My computer is automatically installed a Windows Update at 03:00 and switch off. When I started out, I had to restart Firefox. Firefox came without any of the tabs that were open when the PC went to bed the previous night. I spent an hour looking for what happened to my tabs, without success.

  This has happened

  Just once or twice

  == Automatic update of Windows shut down my computer in the middle of the night.

  Hello.

  It is possible that it was by force the windows closed so your firefox which makes you forget... Have you tried to crash your Firefox to see if the session is not restored?

  To plant your Firefox, simply there open, press CTRL + SHIFT + ESC and then, on the process tab in the window that appears, complete the process firefox.exe. That will force Firefox to close at this moment. Do start again. If it works, ok, so it may have been a case isolate. My recommendation is to configure your windows does not install updates without your intervention. Choose something like 'ask me what to do' or something like that.