ESXI 4 update 1 connected to iomega ix4 - 200 d Iscasi of work

Similar Questions

• Iomega IX4 - 200 d - Boot Loop

  Hello.

  Hello.

  We currently have an Iomega IX4 - 200 d that is stuck on a loop of Boot Logo Iomega.

  I have posted a youtube video showing the issue in order to provide a better explanation.

  https://www.YouTube.com/watch?v=aGLS5HfHPLM

  The unit worked perfectly well and all the sudden we noticed that we had any access to the content.

  At the time that I arrived at the unit, it's this way.

  Content have already been recovered using a machine linux, and now the 4 HARD drives have been tested and are 100% functional.

  We tried a few methods found on internet, HARD drive partitions were removed and all, but we just can't get the device to work.

  Any help is welcome.

  Best regards
  Paulo brine.

  OK, I managed to fix my Iomega IX4 - 200 d, not supported by Lenovo, but in any case, for those who seek to challenge their units, you can find all the necessary files and instructions here:

  https://www.dropbox.com/sh/f3eq457tgw6nfnd/AADNpvcxRYwKqoOC0mTlC978a?DL=0

  Best regards

  Paulo brine.

• Iomega ix4-200 d upgrade to latest version of the firmware

  I recently got this unit and want to update to the latest version of the firmware but I get an error message stating that "this update applies only to version 2.1.31 and more.»

  Try to upgrade to version 2.1.42.18967 - I think that it is the most recent?

  Current version of the firmware is 2.1.25.229

  It seems that I might have to upgrade to version 2.1.3 first and then proceed to the latest version.

  Can someone please help?

  Thank you

  Hi Danp_Vic,

  If your StorCenter ix4 - 200 d runs a version lower than 2.1.31, you need to update using the ix4-200 d-ix4-200 d - 2.1.38.22294.tgz before the update to 2.1.42.18967.

• Iomega ix4-200 d Firmware

  Hey,.

  I have inheridted an ix4 - 200 d, but the unit is stuck at the boot.

  The only thing left to try is a Firmware recovery, but where can I get the recovery files of?

  Hello Tularis,

  You must contact the local support for it:
  https://Lenovo-EU-en.custhelp.com/app/answers/detail/A_ID/14722

• Encryption of files on iomega ix4 - 200 d

  Hi all

  I would like to know if there is a way to put an encryption of files within the NAS, not only the SSL protocol in the communication.

  Thank you all

  tstcweb,

  I looked in the manual for the device:
  http://download.Lenovo.com/nasupdate/manuals/ix4-200d_cloud/ix4-200d_en_us.PDF

  And it doesn't seem like there is no way to encrypt the data using native firmware.

• Iomega ix4 - 200 d - disk not ready

  The selected function is not available because of the visit of discs the dashboard

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Hello nitish6,

  I suspect a problem with one or more readers.

  You can contact the main support and we can run diagnostics to check:
  https://Lenovo-AP-en.custhelp.com/app/answers/detail/A_ID/18133/session/L3RpbWUvMTM2NjU5MDgxMS9zaWQv...

• To access ESXi 4 Update 1 custom server from dell MD3000i iSCSI SAN

  Hello

  I'm brand new on VMware ESX/ESXi products and for the most part, no.  I configured several machines virtual with server 1 and 2.  I am trying to connect a virtual ESXi 4 server in a SAN and starts to become very confused about what I can or not do.  I hope that someone here can break it down for me because I couldn't find the answer to my specific questions.

  Here's how I'm Setup:

  I have a Dell PowerEdge R710 with ESXi 4 Update 1 'Custom Dell' (whatever that means) is installed.

  I have a Dell MD3000i SAN using iSCSI with a pre-configured dedicated virtual disk.

  I would like to create virtual machines on virtual disk said.

  I think that ESXi 4 is completely free.

  It seems that to manage the server, I need to use 1 of the 2 products.  The Vsphere client or web application of VMware Go.

  If I use Vsphere:

  I have the ability to add a type of storage through the user interface.

  I'm on a 60-day trial. I thought that it was free.

  If I configure my iSCSI via Vsphere and then the eval expires... what happens?  All jump on me and then I have to purchase a license to get it back?

  If I use VMware go:

  It seems I don't really have any options to do any kind of configuration iSCSI in VMware Go.  I do?

  I also have a XenServer that is configured in this way and it's all free. I wanted to try the bare metal of VMware solution, but now I wonder if I'll have to go back to Xen.

  Can someone please relieve me of my confusion until I have to pull the plug on this experience.  Maybe direct me to the proper documentation on how to configure what I need with what I have at the cost free-is possible.

  Thanks a lot for your comments and have a wonderful weekend!

  I'd go by QuickStart Webcast and Webcast ESXi Webstart to help get a better understanding.

  Here is a configuration to the MD3000i http://www.dell.com/downloads/global/solutions/esx_storage_deployment_guide_v1.pdf guide

• Warehouses of unstable data using PERC 5 / i integrated controllers ESXi 4 Update 1

  Hello

  Already had an ESXi 3.5 installation works well and booting from a USB flash drive. My system uses two Dell PERC 5i integrated adapters. Shut down the system and it has restarted on another device USB with ESXi 4 Update 1 (currently without a license). I looked in the HCL and PERC controllers appear to be there. The new version seems to start only are fine but no data in the client stores.  So I started experimenting and created a store of data on vmhba1 controller. In the "Adding storage" Wizard, I did this: chose disk/LUN - & gt; Highlight vmhba1 - & gt; the next screen says disc is empty if it was not when used under ESXi3.5 - & gt; Enter the name 'slow-drive' - & gt; has chosen the smaller block size setting "256 GB, block size: 1 MB '-& gt; Click Finish. The system seems to create the data store. But when I start to browse the data store and copy a file to it, she starts and seems to copy then produced an IO error. If I reboot, the storage diappears.

  I've seen references to the use of some utils esxcfg-volume and fdisk-l to persistent editing shells. But this I/O question seems strange.

  Are the Perc 5 / integrated i indeed took in charge the controllers?

  Do I have to use a certain version of BIOS for controllers (I have them update code recent BIOS that worked with ESXi 3.5)?

  All ideas are welcome.

  Thank you

  Battery backed cache write - a DIMM ECC Registered (up to 512 MB) on the controller and a rechargeable lithium ion battery pack connected to it.

  Please give points for any helpful answer.

• Satellite M60: Need a parallel port to connect the Iomega Zip drive

  Hi guys,.

  I have a Satellite M60 and I want to transfer files from my Iomega Zip drive.
  My laptop is not has a paraller port, so I bought a converter to operate, but there was no result.

  Is anyone of you know how to solve the problem and finally reach my driver ZIP of my Satellite in order to transfer files?
  Do I need another converter?

  If so, when is? Or do I have to buy a PCI card with paraller port?

  Any response will be appraciated

  thanx

  Hello

  I've never used a converter USB / parallel but a USB-to-serial port converter and I had very bad experience of such pieces of witch.
  AFAIK this adapters don't work properly.

  Therefore, your suggestion is not bad to use the PCMCIA card with a parallel port.

  Check first of all in your user manual what cards are compatible, then you can try to use this card.

  I think it would be the best solution to connect your Iomega Zip drive to the M60 laptop.

  Concerning

• 200 d IOmega IX4 Firmware upgrade failure

  Hello

  I have an IX4 - 200 d which I inherited. Initially, it wouldn't boot and display only the symbols of USB stick/network after about 60 seconds.

  With some searching on Google, I created a boot disk USB with the firmware updated on this issue. All goes well until the Firmware upgrade begins. I go to the step of (what I assume is) the upgrade of the firmware and it gets 75%, hold for 5 seconds and then the machine stops.

  I tried to repeat the update of the firmware with all the drives present, with every other drive in the first slot and with all the disconnected drives. But it seems to behave in the same way.

  Is this a known issue? Or could it be a hardware failure?

  I'm pretty eager to find a solution - it takes a long time for me to accept defeat.

  The only other suggestion that suggested Dr. Google is to start linux and reformat the hard drive?

  Any help is appreciated.

  Kind regards

  Pete

  Hi André,.

  This case can be closed.

  After the above mentioned procedure eventually work, I didn't know that - ALL readers should be present and formatted during an attempt of USB firmware update / install.

  The link again on the forum - http://forum.nas-central.org/viewtopic.php?f=14&t=4401

  This seems to be the only solution.

  Kind regards

  Pete

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• delivery of mail with 5510 e error - print. updates and connection are ok. a friend has the same problem.

  I checked all of the updates and connections for my new printer.  As far as I can tell, I've checked everything that needs to be checked and everything is good.  But I still have the error of mail delivery when e-printing.  And my friend has the same problem with his new b111a 5510.  What could be the problem?  Regular, printing, scanning, and so on work fine with my wireless connection.

  So looks like it's maybe a problem with the E-mail address provided by your internet provider, you send from,

  What I would say as a test is to create an email account with g mail and or yahoo and try to send the e-mail to your eprint/E-mail account and see if it accepts the email too, make sure you have your printer the value Accept e-mail for all users, you can do so by logging into Eprint Center and then enter these parameters and select this option

• I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  Yes, Photoshop should work fine without the internet connection, as this is the standalone version.

• I have connected, but when I need to update apps, again request the password, but it does not work?

  I have connected, but when I need to update apps, again request the password, but it does not work?

  Birgitte salvation,

  Have you tried to enter your system password.

  Please let know if it still does not.

  Concerning

  Megha Rawat

• ESXi 5.0 and NAS Iomega ix2-200

  Hi guys,.

  We are seriosly thought about the posibility to define ESXI - Hypervisor - with Iomega ix2-200 NAS. We were check the official documentation for Iomega. I checked that ix2-200 is supported for ESXI 4.0, but we are not sure if pressed for ESX 5.0.
  Someone knows this product is compatible with VMware? I have not found any associated IX2-200 and Esxi 5.0
  Thanks in advance,

  If it is not on the HCL, this is not supported.

  However, it works very well (I run it every day).  This is not supported because most suppliers are not going in the effort to verify support for N - 2 equipment.

  If the support is important to you, why not pick up a px4/px6 supported?