ESXI 5.0 and IOMEGA IX2-200
Hello
on VMware HCL, the Iomega IX2 - 200 is certified only for ESXi4:
So I think you're out of luck for ESXi5.
Giuseppe
Tags: VMware
Similar Questions
-
ESXi 5.0 and NAS Iomega ix2-200
Hi guys,.
We are seriosly thought about the posibility to define ESXI - Hypervisor - with Iomega ix2-200 NAS. We were check the official documentation for Iomega. I checked that ix2-200 is supported for ESXI 4.0, but we are not sure if pressed for ESX 5.0.Someone knows this product is compatible with VMware? I have not found any associated IX2-200 and Esxi 5.0Thanks in advance,If it is not on the HCL, this is not supported.
However, it works very well (I run it every day). This is not supported because most suppliers are not going in the effort to verify support for N - 2 equipment.
If the support is important to you, why not pick up a px4/px6 supported?
-
Iomega ix2 200 direct access by ethernet without a router
How to access the ix2 200 via ethernet to the laptop without a router? I tried with a DHCP server. It is assigned an ip address for laptops and 200 IX2. but when ping destination host could not be reached pop message up.packets sent 4, received 4 Can anyone help? assigned ip address 169.254.0.2 for ix2 200, 169.254.0.3 laptop.
Your suggestion does not solve the problem. But I saw the NAS via router initially and then set a fixed ip address for the NAS in the settings. OK now.
-
Hey, I have a WD 3 TB my book around the pose I want to connect to my IX2-200 and use the external hard drive to automatically back up everything that's stored on my NAS.
How can I do this?
Thank you.
Not sure wheter ix2 is able to work with > 2 TB is spread over its USB ports, but normally you would create a copy job that contains "all directories".
If your ix2 doesn't detect your USB, try to repartition your drive USB-2 to + 1 TB
-
Beyond Amazon S3 Iomega ix2 and Mozy backup solutions
Hello
I see that Mozy is now discontinued in the Iomega ix2 NAS. I can't use Amazon S3 for philosophical reasons. Are there other available for off-site backup solutions? I tried to learn more about EMC Atmos, but I can't find a service provider that I can understand. I am very discouraged and I think that all the support has been ignored for this porduct.
Hi berry582,
Mozy, Amazon and Atmos are only available for the ix2 backup programs. You can download the app Atmos here: http://www.lifelineapps.com/
What other questions do you have about Atmos?
-
StoreCenter ix2-200 should he new software when moving to Windows 7 64 - bit to 32-bit xp
Hi everyone;
Our company's new computer and we they will be Windows 7 64 bit. We currently use XP with 32 bits. Do we need new software to connect to ix2 - 200 or the software that accompanies if will be good. Thanks for you help and have a great weekend.
Raym0nd69,
Please see my response on this thread:
https://forums.Lenovo.com/T5/Iomega-Desktop-network-storage/do-we-need-to-get-new-software-we-have-i... -
Iomega IX4 - 200 d - Boot Loop
Hello.
Hello.
We currently have an Iomega IX4 - 200 d that is stuck on a loop of Boot Logo Iomega.
I have posted a youtube video showing the issue in order to provide a better explanation.
https://www.YouTube.com/watch?v=aGLS5HfHPLM
The unit worked perfectly well and all the sudden we noticed that we had any access to the content.
At the time that I arrived at the unit, it's this way.
Content have already been recovered using a machine linux, and now the 4 HARD drives have been tested and are 100% functional.
We tried a few methods found on internet, HARD drive partitions were removed and all, but we just can't get the device to work.
Any help is welcome.
Best regards
Paulo brine.OK, I managed to fix my Iomega IX4 - 200 d, not supported by Lenovo, but in any case, for those who seek to challenge their units, you can find all the necessary files and instructions here:
https://www.dropbox.com/sh/f3eq457tgw6nfnd/AADNpvcxRYwKqoOC0mTlC978a?DL=0
Best regards
Paulo brine.
-
Update to firmware version 4.1.110.33149 for lenovo iomega ix2
Hello
I would like to update the firmware for the iomega ix2 lenovo to version 4.1.110.33149. Approximately how long it will take and will be my network settings be brought back?
Thank you
James
Hi jamescheung,
The update does not change the configuration settings, and the process will probably take about 30 minutes.
-
We need to get the new software we ix2-200 NAS new computers-Win 7 64 bit, old XP32 bit
Hi everyone;
Our company's new computers and they will be Windows 7 64 bit. We currently use XP with 32 bits. Do we need new software to connect to ix2 - 200 or the software that accompanies if will be good. Thanks for you help and have a great weekend.
Hello Raym0nd69,
There isn't any software owner to access the ix2.
They run out of network/Internet protocols.
as long as you have the IP address you can access the user interface, and as long as you map the actions you should be able to access the data.
-
I have a small question
Iomega ix2 does OPENLDAP support?
Hello MtrMahran,
I do not see openldap on our specifications page:
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/32534Or in our documentation or knowledge base.
Have you tried to connect with it and it is a failure?
-
Hello
I have an ix2-200 with 2 500 GB hard drives in the Raid system
I changed one of them to another hard drive 1 Tera
the system will detect and remade the raid
Then I change the drive with another 1 tera hard drive
the system has detected the change and rebuilt the raid
Now, I have 2 hard drives in raid 1 Tera, but rest 500 GB capacity?
as I correct?I have data on hard drives
Thank youI'm not 100% but I think that when you rebuild the raid it will use only the 500 GB on the 1 TB as the other hard disk in the raid will be only a space 500 GB max.
what I would do if the 2 x 1 TB work (be it only 500 GB) would back up data (can use one of the 500 GB hard drive) and the raid reset and wipe data then restart the raid with two 1 TB hdd in.
It's me, someone who might know a little more wait
-
Ix2 - 200 cloud Edition cannot connect to the site of the system remote win8
Getting message "Unable to connect to xxcloud" in the Storage Manager (ver. 1.4.4.14439)
Everything looks ok on the main system (Win7) Green everywhere check :-)
Open port 80, 443 & 50500-50599
Cloud Edition ix2-200-DC386F FW 3.3.2.29823
Any suggestions?
so you must enable the automatic configuration of UPnP on your router... after that, you should be able to connect on your IP
-
ESXi on T610 and OpenManage Server Administrator on windows
Dears
I have Power edge T610 hosted ESXi 4.1 and I need gale HW on network via OpenManage Server Administrator is installed on the Windows machine, I need to know that it is OK or not:
If it works: what the user name and password to log on give
otherwise: how I can eat the server HW
Moharafa,
I sent you an email with a detailed itinerary, which you can use to install Open manage with ESXi.
I would like to know if that's what you're looking for.
-
How to upgrade the esxi 5.0 and 5.5 only give me the step in process setp.
How to upgrade the esxi 5.0 and 5.5 only give me the step by step process.
There are several methods supported for direct upgrade to 5.5 ESXi are:
- vSphere Update Manager.
- Interactive update of the CD, DVD or USB drive.
- Scripted upgrade
- esxcli
- Automatic deployment
You can find each method in this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2058352
Also a good interactive video updated via CD/DVD/USB. Upgrade to VMware ESXi 5.5 using Setup Interactive - YouTube
-
Once again; same problem, others have encountered but nothing seems to work.
An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.
We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated
1 physical servers
-Internal IP address; 172.16.160.21
-FARM FirewallvCenter Server
-Internal IP address; 172.16.1.85
-Local Office (ALX)
Location of destination (ESXi host):
-Internal IP address; 172.16.153.20
-Firewall ROOMMATE
Already completed:VMware KB: disable SSL on VMware Converter Standalone 5.x encryption SSL disabled in converter-worker
Firewall are open / Tunnel is open throughout the environment.
I have attached the logs.
Thank you very much
POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?
Maybe you are looking for
-
Unable to pair Apple Watch after a reset
My new Apple Watch replacement was paired with my iPhone yesterday after that I received it. This morning it froze (black screen) and I followed the instructions to reset. It was not to find my phone so I unpaired it. Now when I try to pair matching
-
Bluetooth no longer works after update to OSX 10.11.2
After the 10.11.2, update Bluetooth stopped working. I rebooted without effect. I have the Bluetooth icon with the tilde by stating that there is no Bluetooth and I have no Bluetooth menu in system preferences. What should I do to fix this?
-
HP 8530 P replacement integrated WLAN MiniPCI WLAN
I have a HP 8530p with integrated radio (Intel 5300). I prefer to use a card MiniPCI (Intel 4965). I disabled the wireless built-in, opened the hood, my MiniPCI card installed and booted up the laptop. It does not recognize the card somehow. I instal
-
Recently, I did the update of security and had 17 updates installed. After installation I closed the computer for the day. The next time that I started it upward, I received a stop error message 0x81ecbe79 and he started a reboot loop and I kept ge
-
Work of printer only as scanner-printer driver or something
Hello. I have problem with my new printer all-in-one HP LaserJet M1132 MFP When I connected the printer with my pc first, everything looks very good, works fine-printing, scanning, copying - but when I wound up the PC and then another day turned on a