Update to firmware version 4.1.110.33149 for lenovo iomega ix2

Similar Questions

• Update the firmware to Mac to support AirPrint for an all-in-one HP Officejet 6500 E709a.

  Y at - it such an update for Mac OS X 10.7.x or is not AirPrint support for this particular model?

  Hi jaweston44,

  AirPrint does not work on the E709a.  You are wanting to print from a computer or mobile device?  Is the printer connected via usb to an AirPort base station, or is it with/without wire?

  Here is a link to Apple's site for all AirPrint printers supported: http://support.apple.com/kb/ht4356

• WRT54G Firmware Version: update v7.00.7 Beta?

  Hello

  I have a router wireless EMEA WRT54G v7 with Firmware Version: v7.00.7 Beta. I can't find an update of the firmware on the site.

  Can you please help?

  Thank you

  Firmware update is available. Version 7.00.8 is available on the EMEA website. Click here!

  It is enough to click on "Downloads" and select the correct hardware version.

• Unable to update the firmware in Mezz KX4 - KR DP 10 GbE Ethernet X 520 14.5.9 version

  Hello

  Try to update Intel x 520 10GbE mezzanine NIC firmware on a blade of M620 fails with the following error:

  SUP0517: Unable to update the firmware in Mezz KX4 - KR DP 10 GbE Ethernet X 520 version 14.5.9.
  Detailed description:
  The image of the firmware specified in the operation did not properly apply. An internal error occurred.
  Recommended action:
  Try the operation again. If the problem persists, download the latest update of your service provider package and try the operation again.

  BIOS, iDRAC, Lifecycle Controller firmwares are newer. I tried to upgrade from iDRAC and directly from controller (using SUU) life cycle, the same thing. haven't tried yet the OS. I want to update firmware, because she refuses to get DHCP address when you try to boot from PXE to deploy the operating system. At the same time in the controller of lifecycle, in the configuration of the network, I was able to successfully get the addresses of the DHCP server and scan the Dell FTP site for firmware updates.

  Any ideas? Thank you.

  Egils

  I would like to start the update of the direct OMSA. Once updated, this should not happen again.

• WRT610N Firmware version update Question

  I just bought a WRT610N. On the bottom of the camera, I see an indication of the V1. When I registered the device, the Linksys site told me that there is an update of the firmware (V1.00.00.1018_20080816).

  What is the best way to install it?

  Can I install the firmware before using (If Yes, what is the procedure for someone), or should I set up the device first, run and then update the firmware?

  Thank you

  Kevin

  Download and update the Firmware first...

  Download the Firmware from here , connect a computer to your router and open
  a page of Internet Explorer browser. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin
  Click on the tab - then 'Administration' on
  the 'Firmware Upgrade' void tab-here, click on 'Browse' to select the
  compressed extract/No .bin or .img file and click on "Upgrade"-waiting for seconds... ".
  It shows that "Upgrade successful" after
  update firmware, click Reboot/continue and you will be returned back
  on the same page OR it will say 'cannot display the Page.
  Reset the router for a few seconds and set it up...

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• Satellite C670 - update the firmware on the CD-Rom drive

  Hello!

  I have a Toshiba Satellite C670. I want to upgrade the FIRMWARE driver for the optical unit.
  Please tell me where I can get the update.

  Features dvd / cd-rom:

  DVD RW: TSSTcorp CDDVDW Ts-L633A TO01

  Version: 6.1.7601.17514
  class CD-ROM
  Manufacturer: "Standard CD-ROM drives"
  OS: Windows 7 64-bit

  Please to help.

  Greetings

  You can update the firmware ONLY if the most recent version has been released for this drive.

  There was an update firmware for CD/DVD players * TS-L633C * and * TS-L633Y * as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  But for * TS-L633A * there is NO firmware update available.

• Satellite Pro A200 (PSAE7): failed to update the firmware Vista

  Hello

  I tried tp update the firmware of my HD-DVD player with new firmware TO35 (SD-L802B), but it is not possible. The upgrade of this Winvup button is not selectable. I had the same problem with an older firmware, but I just thought that it was because the firmware is up-to-date (book is 1 month old).

  Winvup shows my drive as "TOSHIBA DVGW/HD SD-L802B TO01 (26/10/07). The discription of To35 said, he needs a version of TO33 or T034, that is the problem?

  I got this firmware update form [link firmware: http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=DE&mode=allMachi nes & action = search & teddProduct = 737]
  so, it should be the right one.

  So what can I do to upgrade my drive? Watching a HD DVD is not possible :(

  THX,
  Holger

  It is not possible to update the firmware on your SD-L802B drive because the firmware released on the Toshiba page deigned for the TS-L802A drive.
  Do not mix these two discs! It is not the same thing!

  I found this site on the engraver of DVD Super-Multi SD-L802B
  http://www.storage.Toshiba.EU/index.php?id=3&PID=221

  But according to this page, the firmware is not available for this driver (at this time?  :|)

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• Update of firmware for 40TL963RB

  Good evening!

  I bought a Toshiba 40TL963RB TV.
  However, after a collapsed while respond during startup (black screen and light green only).

  I used flash USD to engrave some firmware.
  However, this firmware was for television 40TL933.
  For example, I burned 3 files (on my USB key):
  TL_MBOOT_545609_INIT_CLEAR.bin
  TL_MFC_246009_INIT_CLEAR.bin
  40TL933K_644087_INIT_CLEAR.bin

  These files as firmware my TV works fine, wait for the DVB - T2.
  I guess that this 40TL933 is not compatible DVB - T2,
  However, my 40TL963RB should support DVB - T2 hardware (I read the specification).
  However, the feature DVB - T2 has been lost during the combustion of the firmware.

  I downloaded the latest firmware for 40TL963RB: tl963_993045.bin.
  I have renamed it to 40TL963_INIT_CLEAR.bin.
  television begins the process of updating the firmware, but unfortunately, it frozes (hangs up)
  during the update firmware on 1% (always).

  Also I tried other firmwares: TL966, TL968, TL969, a version of 933.
  The same result - hangs at 1% during the update.

  Any ideas?

  I guess I need binary MBOOT & MFC binaries for my 40TL963. Am I wrong?

  Thank you very much!

  Post edited by: GkmSoft

  In my opinion its very bad idea to use the firmware that is NOT specially released for your Smart TV.
  I don t think that the use of this firmware not compatible could be very useful.

  You said, your TV no longer responds to the start.
  In my opinion there is nothing to do with the firmware of the TV because TV should work even if the firmware is not updated. I think that your TV equipment malfunctions.

  I m not Smart specialist not in TV, but there is not a lot of parts that can be replaced: motherboard and LCD screen are the main components and I think that TV does not answer the needs of TVs one motherboard check

  By the way: I found the firmware for model: 46TL963RB
  [Firmware Update Version 6.9.9E.1 | http://www.dl.toshiba.com/tsb-dtv/NA/GB/DE/46TL963RB.html]

• color laserjet pro m252dw: How do to return/difficulty recent update of firmware for hp color laserjet pro m252dw as now does not

  My printer color laserjet (color laserjet pro m252dw) no longer works due to not recognize a black cartridge to third because of a recent update of the firmware. Error given is 'Supply memory error'.

  I already looked to the top of the page of Software Support for this printer, but new and recent firmware update is not released/listed, only the firmware upgrade market is given.

  I'd appreciate advice and instructions on how to return/repair my printer no longer print.

  Can you please advise on which firmware update to install instead to get my printer back in the order of operation?

  Thank you very much

  Geertje

  PS: HP: how VERY boring; next time that I'm in the market for a printer I have will conduct the review of my options

  According to the other thread that I have commented on the user managed to solve the problem of roll back firmware version 20160331 to 20150716 .  Unfortunetly the user did not comment if the old version of firmware is out so that we can share a simlilar solution.  It may be that this person had a copy archived in offline mode or found another source outside the HP support Web site.

  At least you can get an older version of firmware all the steps that we share for the firmware downgrade won't do you no good.  I'd be careful to search a German site for firmware updates.  HP has put regional locks in place according to international contracts, that they do to market their products in a given region.  Using a German firmware on a printer WE made may have strange side effects on what types of cartridges are allowed.

  What is perhaps a better use of your time would be to contact your 3rd party cartridge company and see if they can send you a cartridge that is compatible with the new firmware.  Chances are that they have seen the same problem with other users and already have a chipset to work around the problem.  In this way, you can stay on the newest firmware and continue to use your favorite too cartridges.

• Last update of Firmware: Droid RAZR MAXX HD

  Hey guys,.

  I was wondering what are the latest updates of firmware for Droid RAZR MAXX HD? My backup phone that was running the software 9.20, grabbed the update at 9:30 beginning of last week, but do not seem to phones of my parents who ran the 9.18 got software update immediately. So I was just curious to know what version of firmware they should finish by themselves.

  Thank you for your time!

  Brandon

  
  

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• Update the Firmware XG270HU? 15 05 06 - 01

  I just bought the XG270HU for ~ $500 and was disappointed when I realized my r9 280 not supported Freesync. So a few days ago, I ordered a new r9 390 for ~ $ 300. Now I am reading that theres a problem with the firmware that must be updated to be able to run Freesync + OD. Now, I have to spend ~ $100 to ship to Asia for a simple update?

  What fimware version the hotfix is applied to? By unlock my monitor, the empowering button and the power button, wait for the desktop to appear, releasing his power and then release the button on empowering and by pressing the empowering key once more, I am able to say that my firmware version of monitors is 15 05 06 - 01. I guess that's also the date, that the firmware is released. I read the updated firmware is released sometime near July?

  Can someone tell me what version of firmware is up-to-date?

  You guys are very good also have good firmware, had recently updated mine to date and now I have the same version as you.  Using blur busters ufo test I checked the overdrive is now working, without lightboost or some sort of strobing backlight blur featured will never disappear completely.  However the strobe techniques add a measurable amount of honest input lag that I'm going to take the 1-4 ms response time of pixels on that.