Iomega ix2 openLDAP
I have a small question
Iomega ix2 does OPENLDAP support?
Hello MtrMahran,
I do not see openldap on our specifications page:
https://Lenovo-na-en.custhelp.com/app/answers/detail/A_ID/32534
Or in our documentation or knowledge base.
Have you tried to connect with it and it is a failure?
Tags: Lenovo Products
Similar Questions
-
Update to firmware version 4.1.110.33149 for lenovo iomega ix2
Hello
I would like to update the firmware for the iomega ix2 lenovo to version 4.1.110.33149. Approximately how long it will take and will be my network settings be brought back?
Thank you
James
Hi jamescheung,
The update does not change the configuration settings, and the process will probably take about 30 minutes.
-
Beyond Amazon S3 Iomega ix2 and Mozy backup solutions
Hello
I see that Mozy is now discontinued in the Iomega ix2 NAS. I can't use Amazon S3 for philosophical reasons. Are there other available for off-site backup solutions? I tried to learn more about EMC Atmos, but I can't find a service provider that I can understand. I am very discouraged and I think that all the support has been ignored for this porduct.
Hi berry582,
Mozy, Amazon and Atmos are only available for the ix2 backup programs. You can download the app Atmos here: http://www.lifelineapps.com/
What other questions do you have about Atmos?
-
ESXi 5.0 and NAS Iomega ix2-200
Hi guys,.
We are seriosly thought about the posibility to define ESXI - Hypervisor - with Iomega ix2-200 NAS. We were check the official documentation for Iomega. I checked that ix2-200 is supported for ESXI 4.0, but we are not sure if pressed for ESX 5.0.Someone knows this product is compatible with VMware? I have not found any associated IX2-200 and Esxi 5.0Thanks in advance,If it is not on the HCL, this is not supported.
However, it works very well (I run it every day). This is not supported because most suppliers are not going in the effort to verify support for N - 2 equipment.
If the support is important to you, why not pick up a px4/px6 supported?
-
ESXI 5.0 and IOMEGA IX2-200
We are seriosly thought about the posibility to define ESXI - Hypervisor - with Iomega ix2-200 NAS. We were check the official documentation for Iomega. I checked that ix2-200 is supported for ESXI 4.0, but we are not sure if pressed for ESX 5.0.Someone knows this product is compatible with VMware? I have not found any associated IX2-200 and Esxi 5.0Thanks in advance,Hello
on VMware HCL, the Iomega IX2 - 200 is certified only for ESXi4:
So I think you're out of luck for ESXi5.
Giuseppe
-
Can I set up an FTP online using iomega ix2 NAS?
The only information information I found is how to set up an FTP server in the network locan
I need something different - I would like to just a regular FTP server that would be available to anyone on the internet URL ftp://blahblahblah.mylenovoemc.com fe
Is it still possible?
all the best
Leszek
Yes, it's possible; at least with the ix2 - dl, because that's what I have. Your router must be able to port forwarding TCP 21 to the ix2 network I.P. address. As long as others can hit your router or DDNS address associated with, that they reach your SIN by FTP. If the ix2 is configured with the default of multimedia access permissions, FTP access to those records out this address designated or authorized users can FTP with their powers, for example ftp://username:[email protected]. (code = password. * beep * HTML converts in asscode in an emoji!)
-
Iomega IX2-CloudEdicion on the problem of network MacOSX El Capitan with index Spotlight
Hello!
I have a big problem with my Iomega NAS.
MacOSX 10.11 El Capitan, I run, I try to look for documents on my NAS storage and takes a long time to find and can find all the documents. I try to re-index the volume but still the same... I activate the AFP Protocol.
How can I contact Lenovo update firmware to make it compatible with MacOSX 10.11 IX2?
Concerning
Hello hugomenezes,
You can contact your local support here:
https://Lenovo-la-PT.custhelp.com/app/answers/detail/A_ID/18725/session/L3RpbWUvMTQ0NDI0MTQzNy9zaWQv... -
Iomega ix2 wireless configuration
Just get an IX2 NAS, and I'm an office space shared with connection Wi - Fi. How can I configure / install my NAS (to share between the 4 PCs) not connected to the router?
RAID 1 is the default value of factoriy for a completely filled ix2 (2drives)
Check your settings in https://
/manage/drives.html?cat=all #. Note: you may lose all your data if you decide to change the RAID type, so before saving.
RAID 1 is 'mirror', so you will get only half the capacity rather than RAID0 or JBOD.
-
Iomega ix2 200 direct access by ethernet without a router
How to access the ix2 200 via ethernet to the laptop without a router? I tried with a DHCP server. It is assigned an ip address for laptops and 200 IX2. but when ping destination host could not be reached pop message up.packets sent 4, received 4 Can anyone help? assigned ip address 169.254.0.2 for ix2 200, 169.254.0.3 laptop.
Your suggestion does not solve the problem. But I saw the NAS via router initially and then set a fixed ip address for the NAS in the settings. OK now.
-
Hello
I'm trying to access my iomega Ix2 via internet on the site of the Ix2. I can get to the home page, but after that I can not connect to one of my accounts.
I want to make is that if I give someone (a frend or family) a user account that can log on to the file here and the info that is inthere.
Hope to here from someone
marcel greetings
Hi thesunny,
Make sure you use the correct credentials. What error gives when you try to connect? If you cannot log in or have forgotten your name of user and password, you can press in and hold the reset button on the back of the unit for 15 seconds or until the device restarts.
-
Cannot connect to the ix2 Lenovo after the 4.1.202.33573 firmware update
Hello, I've updated firmware for 4.1.202.33573 (the previous was 4.1.106.31982) and after that, I can not connect my Lenovo ix2 using different web browsers. After you type the user name and password and clicking "login" nothing happens for 1 + hour but appears only "processing...". "message on background greyed. After more than an hour of "processing...". "it appears the error message:" impossible (get/read) asked for information "(excuse me risk of errors in the translation of Polish messages in English). After updating firmware also the power and reset buttons stopped working. By pressing or holding the button market / stop has no effect as pressing reset with a PIN. To restart the unit I had to disconnect the power supply and connect again, but also had no effect on connection problems and buttons. Evolution of the browser has no effect. Despite these problems of storage is available - I can connect a network drive, copy files from and to the storage. Is it possible to go back to the previous version of firmware that worked properly for a long time wihout via web interface? -Cordially - Maciek
Read this post to see if it helps:https://forums.lenovo.com/t5/Lenovo-Network-Storage/Lenovo-iOmega-ix2-Login-and-Printer-problems-aft...
-
IX2 - dl actions do not appear on start up
I have an Iomega IX2 - DL, which is only a few months old. Lately, when I turn it on, all my actions do not see the and I'm unable to access my data. If I leave it for about 5-10 minutes, they finally appear to give me access to my data.
Hoping someone has an idea on what could be the issue.
See you soon.
I tried a system check of files in mode offline, but for some reason, that would not work (I guess the damage spread beyond the data is not mounted in the lenovo partition).
Fortunately, I still had most of my data on my NAS old then I attached the reader lenovo to a container of disk external usb and saved just the additional data.
I have now done a factory reset and I am trying to move my data again through to the lenovo.
Seems to be a behavior at the moment. I will continue to monitor the lenovo and if it happens again, I'll open a service ticket.
I can only imagine that a firmware for the corrupt lenovo system update, causing problems. I think I'll put the lenovo drive in the usb container and backup the system incase any other partition cause other problems the firmware updates.
Thanks for your help.
See you soon.
-
How can I control the speed of the fan on the IX2 - DL
I'm trying to find where I can adjust or set the speed of the fan on the Lenovo Iomega IX2 - DL.
I make a copy of the large data, and internal temperatures are higher I would like to see.
Is there a way to define or to control or adjust the speed of the fan at different temperatures in the box?
Thank you.
Snoopy
Hi snoopypa30,
There is not a way to change the fan speed manually. The fan turns on when the device has reached a certain temperature. Is your ix2 in a well ventilated area?
-
How to get an RMA number for a money-back guarantee?
September 13, 2014
Hi all
I'm trying to figure out how to get an RMA number for a warranty for my iOmega ix2 return. I checked my warranty and it's good for another year. The Lenovo Web site sent me round and round, never really getting to any kind of page which will allow me to enter my serial number and other data of warranty.
I would like to call or chat but it's Saturday, and these options do not appear to be taken over the weekend.
Someone has a direct link to the page of Lenovo/iOmega NAS support guaranteed returns?
Thank you in advance.
Best,
Jeff
Comment to Moderator: Email addresses removed to defeat spammers robots.
Suggest that you only contact your local support via phone staff. OU can any of here first... http://support.Lenovo.com/us/en/downloads/ds034667
-
Port Forwarding/Asus router
Can someone ' "guide me through Port forwarding
I have the Cloud Connect Port information
I have two TCP and UDP selected in Port forwarding protocol that I have selected "both" (TCP and UDP)
I have a Service name field (LenovoCloud!... or is my "personal cloud name go here?) I also have a range of ports (4900:5300), then I have two other fields IP Local and Local port... What are my values for the last two, (my IP address, see the section called Personal Cloud parameters go here?) that I have however enter the numbers, my router Asus N66RU won't Port Forward...
Thank you
Frank
For my Asus router, I have the following entries specifically for the cloud of Lenovo/Iomega ix2 - dl
Iomega Personal cloud 443 192.168.1.101 443 TCP Iomega Personal Cloud 50500 192.168.1.101 50500 BOTH When the ip address is the ip address internal of the ix2 - dl. You will also need to open potentially other ports for other services, such as FTP, Torrent of Transmission, etc.
Maybe you are looking for
-
Printer appears offline, Windows 8
I just bought a new computer hp laptop (Windows 8) and installed my Laserjet P1102 via the HP printer installation wizard because the system requirements don't include Windows 8. I was able to install it and printed papers, but after that I restarted
-
L450 blocked to 0.77 GHz processor when it is on battery and can not downgrade the BIOS
Hello It seems that the CPU of my L450 is blocked to 0.77 GHz speed when it is running on battery power and no matter how heavy the load, the CPU speed does not fit on the rise, unless I plug in the AC power cord. This makes the laptop a bit useless
-
Hello I try to save data using Labview. I am using a USB data acquisition hardware. My question is: how to set the time for only the recording feature (I try to use the express VI: 'Write LabVIEW measurement file'). The program will run for a period
-
I have time picker when I select the time from the time picker, time will display on the look of the label on the peak. but when I click the ESC key to close the time picker, time will display in the label, mean when I close the timepicker, it closes
-
A referral was returned by the server: error
Hello after the restoration of my my OS win 7 and put to date to win 8 pro x 64 I have the following problem: I can not install 12. Disk keeper still appears the message: a referral was returned from the server .whta can I do?