ESXI 5.1.0 purple screen with openwrt
Hello
Very annoying problem. I run an instance openwrt and after a few reboots of the ESXI 5.1.0 shows purple core dump on the console screen.
I have a G7 HP Proliant DL 360 with the latest firmware update from HP. Also installed the latest drivers from HP. It must be fully supported
but no cigar. I have not encountered this problem with ESXI 5.0.0. Anyway around this problem? What type of logging you need me to look at
in this?
Best regards K Bryan
Well... Normally, this isn't for your build... But the purple screen you have looks remarkably similar to this:
Your ESXi comes it up/stay up at all or is this completely down? ... If you have access, you could test with this setting... But as I said, normally if your version is higher than that it should be resolved.
Tags: VMware
Similar Questions
-
ESXI 5.5 GROUP (Purple Screen of Death)
Dear Sir
I installed ESXI 5.5 U1
IBM x 3850 x 5 system
After the configuration of the machine puts the GROUP below
one please tell what could be the reason.
regarding
Browlin
Post edited by: Browlin
The problem with map of OPI. That is solved by IBM
-
Reference Dell GX620 Purple screen with ESX 4.1
Hello
I had a Dell GX620 of Otiplex box with 4 GB of Ram and 2 hard drive ESX 4.1 and all of a sudden I start to experience crashes (purple form), sometimes 3 seconds after the start of the process and others, when the system already in place, but I connect to one of the virtual machines.
He is always coming up with some 'console/6096 PCPU0"among other error lines.
Everyone got an old similar system and is having a similar problem? Maybe someone knows how to fix this?
Thank you very much
Download the memtest disc and test the RAM. http://memtest.org/#downiso Let run overnight or longer.
-
Purple screen on HOST with Esxi 5.5
Good afternoon
I'm upgrading from 5.1 to 5.5 esxi servers.
I've updated 5 servers without problems but the sixth, I had a problem.
This morning when I've updated a host everything worked fine. Suddenly, an hour later, host was unreachable and when I checked in the server room
I got a purple screen. I manually restarted the host, and everything seems to work.
In my research, one user has this kind of problem, and it's cyclical. I'm doing research in this type of case a way to fix this bug.
I took a quick glance at 2 positions:
VMware KB: ESXi hosts with larger workloads can generate partial core dumps
VMware communities: All content-all communities
Is that someone already had this kind of screen? Understand what the purple screen?
Kind regards
Definitely check your versions of firmware on your server, BIOS, NETWORK card, card Raid array. What type of server is it?
-
Purple screen of death with ESXi 3.4 U4
Hi all
I lived I have a strange problem with esxi 3.5 U4. Yesterday morning I got the purple screen on one of my hosts esxi test, if anyone can give me any idea what this error means.
on the host, it there was only one virtual machine running with ubuntu server on it. The thing I noticed is that my colleague, who install the ubuntu Server I forgot to install vmware tools. Can this be the cause of this error.
After a reboot and the vmware tools install everything I work, but I don't know what was the problem in the first place, so I appreciate your responses.
Kind regards
Lyubo
Hello
Definitely check your hardware, here is a link to find some info on the purple screen and error codes:
http://www.VI-Toolkit.com/wiki/index.php/Vmkerrcode
--
Wil
_____________________________________________________
Visit VMware developers at http://www.vi-toolkit.com wiki
-
Hello
I think it is good to add here...
I started now to migrate my server under Windows Server R2 2012. The virtual environment is vSphere 5.5 HP DL380G7 servers.
Today, I have solved a hard crash of the host server after you have added a server Win2012R2. The symptoms are CMTF (purple screen of death) to the host (I was pleased that I have disabled the new customer HA; that would be a blow my other hosts).
Basic message was "...". exception 14 worldwide xxxx... ».
I solved it very simple by changing the E1000 to VMXNET3 virtual network card. For me, it looks like a bug to develop by VMware in the next versions. For now it works.
I hope this information helps you!
Good luck!
See this article.
Frank
-
I have a client that is running ESX 4.0 on a compatible with ESXi 5 host. When I went to upgrade the host to ESXi 5 I ran into a problem, I have never seen elsewhere. I started on the disk and screen with the status bar at the top is fine. Immediately after loading, before showing always the yellow background or license agreement, he throws a Uni purple screen and without words. If you leave it for about 20 seconds, then the screen goes black with gray blocks randomly everywhere. I tried with another download and CD but I get the same results. I couldn't find anything on purple screens without the current text. Any help would be greatly appreciated!
Did you check if the version of the BIOS of the host must be updated in order to run ESXi 5.0?
André
-
Purple screen after installing ESXi 4, pf exception (14) in the world
Hello
I get a purple screen after starting the esxi host 4. I get the following exception: exception (14) in the xxxx world pf
I tried the esxi version 4 with update 1 and without. both had the same problem...
The server is a "new" hp proliant dl120g6...
Does anyone have an idea to solve this problem?
Hello
Welcome to
Everything seems to point to the sfcbd process (CIM providers). But it is a hypothesis. All this :).
Running a version of esxi HP custom computers no HP support can produce weird effects. For this reason, it is highly public using this type of installation.
I'm not really an alternative for what you want. To monitor (in a tight way) on esxi, you must use a supported HP computer. If this isn't the case, you must use a version of esxi vanilla without waterproof hardware monitoring.
Please, remember to mark a useful or appropriate response.
Best wishes / Saludos.
Pablo
Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!
-
ESXi 3.5 purple screens / plant
I have an esxi 3.5, that keeps "purple screening" / accidents. The server runs only one virtual machine and the 'collision model' is: server runs for a few days and then crashes
The material is a HP proliant box.
This has happened both 3.5 U2 and U3 3.5 (with all the latest patched/upgraded).
Patterns of errors in the paper (attached) does not correspond to those indicated in KB: 1008130 (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1008130( )
Well, you might want to change the memory on the system. Or at least run Memtest. HP also has a bootable CD of diagnosis that you could run against the system.
-
white screen with purple lines?
Hi, I just tried to update my iphone 5 to latest IOS and after the black screen with the Apple logo and the loading bar finished it went to a screen with edges white and dark with purple in the darkest bits lines. I tried to plug it into my pc and go through the itunes app, but it does not record that the iphone is also my lock button is broken so I can't try to do a soft reboot. No one knows what it is and how I can fix this problem? Please help me
Try to see if iTunes detects the phone into recovery mode: http://support.apple.com/kb/HT1808. This procedure requires the use of the home button but not the lock button, it should be OK.
-
Purple screen on ESXi 5.5 for HP in preparing the AD for Exchange
Hi,.
we have a installed ESXi () ESXi 5.5 for HP - Image profile: HP-ESXi - 5.5.0 - iso - 5.72. 3) for both servers (DC and Exchange).Preparation of Active Directory for Exchange (). \setup/PrepareAD /IAcceptExchangeServerLicenseTerms /OrganizationName.: "Enter the name of Org Exchange"), we get a
Purple screen (photo attached). And that already for the second time !
No matter which solve this problem or knows how to solve this problem.
Thanks in advance.
Alexander
Looks like some sort network problems concerning virtual vnic in the prompt that is the cause. See the Article KB KB VMware: VMware ESXi host 5.x undergoes a screen to diagnosis purple mentioning E1000PollRxRing and E1000DevRx
VFK
-
Purple screen any attempt to install ESXi 5.0
"I'm trying to install ESXi 5.0, but don't have purple screen 'any place on the disk for the dump data' Debugger waiting (World 2048) no port for the remote debugger ' I think I know what it means and have attempted to examine Global Knowledge for the history or recommendations.
Thanks in advance for your answer
Colombia-British
It seems that you might have the same problem, as described in this thread - http://communities.vmware.com/message/2200195#2200195.
-
The KB article http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & externalId = 2007269 said that with the 4.1 update 2, you will discover a purple screen after the upgrade of the server vCenter.
Does anyone know if all 4.1 < U3 are also affected? What about 4.0? I need to know if I should plan a lot of upgrades to the host before our upgrade to vCenter.
Thank you!
from my understanding, it's just bound to 4.0U2, however, you can provide feedback to the KB article.
-
Suddenly during the production during the day, one of my hosts ESXi 5.5 crashes with a purple screen.
The error is 14 exception.
At the bottom of the screen, it says "partial discharge: not enough space.
This suggests that it is impossible to make a Coredump on the disk.
What can cause this problem? It is the third accident in 4 months.
See picture attached for more details.
VMware ESXi host 5.x undergoes a screen to diagnosis purple mentioning E1000PollRxRing and E1000DevRx (2059053)
-
LSI-9210-8i (LSI SAS 2008) written very unstable and purple screen
Hello!
I have a serious stability problem and I am not able to understand how to solve.
I have an IBM ServerRaid M1015 (oem of a LSI-9220-8i version) I reflashed with the ISIS software (9210-8i IT mode, but see below for details).
When I started with ESXi and create a virtual machine with a big virtual disk (90% of the physical disk), the creative process hangs after some time (about 10% for a vdisk 145GB on a 160 GB pdisk)
and I get a lot of 'stuff' in the file vmkernel.log (see attachment logfiles). Finally, ESXi will be purple screen and die.
I seem to be able to make the small diskaccesses with no problems.
To test if it's a hardware problem, I have:
- I did a new install of Debian - 6.0, and there everything works without problem.
- I only did a new install of Solaris-11u1 no problem here too: the controller was FAST!
- I tried to move the controller to another host (HP DL120 G6), same problem here.
- I even tried to buy another controller (which worked perfectly with the included IBM software but after that I have reflashed with the LSI-9210-8i IT firmware, that he was not only the first)
- I tried a cable cutter instead of HP backplane to be sure it wasn't the bottom of basket that gave me problems.
- I tried to move the map to another location PCIe cable 8087 to the other port on the controller card.
The system configuration:
- VMware: ESXi - 5.1.0update1 (build 1065491)
- Machine: HP ML150 G6 (12 GB of memory, BIOS: ø21) and HP DL120 G7
- Controller: IBM M1015 reflashed to LSI-9210-8i (2108it.bin firmware Version: 16.00.00.00 release date: February 27, 13, BIOS-7, 31)
- ESXi drivers:
Before the update:
# esxcfg-scsidevs - has | grep mpt
vmhba0 mpt2sas link-n/a sas.500605b002aa7ea0 (0:5:0.0) LSI Logic / Symbios Logic LSI2008
# vmkload_mod s mpt2sas | grep Version
Version: Version 10.00.00.00.5vmw, version: 799733, Interface: built 9.2: 1 August 2012
# vmkload_mod s mptspi | grep Version
Version: Version 4.23.01.00 - 6vmw, version: 799733, Interface: built 9.2: 1 August 2012
Update:
# esxcli software update v vib - /tmp/tmp/scsi-mpt2sas-16.00.00.00.1vmw-1OEM.500.0.0.472560.x86_64.vib
Result of the installation
Message: The update completed successfully, but the system must be restarted for the changes to be effective.
Restart required: true
VIBs installed: LSI_bootbank_scsi - mpt2sas_16.00.00.00.1vmw - 1OEM.500.0.0.472560
VIBs removed: VMware_bootbank_scsi - mpt2sas_10.00.00.00 - 5vmw.510.0.0.799733
VIBs ignored:
After update:
# esxcfg-scsidevs - has | grep mpt
vmhba0 mpt2sas link-n/a sas.500605b002aa7ea0 (0:5:0.0) LSI Logic / Symbios Logic LSI2008
# vmkload_mod s mpt2sas | grep Version
Version: Version 16.00.00.00.1vmw, Build: 472560, Interface: built 9.2: February 28, 2013
# vmkload_mod s mptspi | grep Version
Version: Version 4.23.01.00 - 6vmw, version: 799733, Interface: built 9.2: 1 August 2012
I have attached the log files from the system. Is anyone able to point me in a direction for a fix? Or any who have used IBM M1015 (in mode IT) with VMware - 5.1
This starts to become just a little frustrating! :-)
I cannot conclude 100% but it seems to be a driver problem ESXi or the combination of firmware and driver.
Best regards
-Morten Hermansen, Fanitas Green
Hello!
It seems that VMware ESXi 5.5 have a conflict pilot with different controllers in the same machine at the same time.
I have been using the LSI AND the controller on the motherboard for extra drive supported.
When I only disks on the controller LSI wanished of problems!
I have why it worked in the Debian and Solaris with disks on both controllers, but not in ESXi. I tried to level the firmware and drivers of LSI, but he will get unstable on me when using different types of controllers at the same time.
Best regards
-Morten Hermansen, Fanitas Green
Maybe you are looking for
-
In mac os, 10.6.8 firefox 25.01. Unfortunately, I already clicked on the button and made the 'renewal '. It seemed to remove all of the customization, I did on firefox (my Add ons and tabs I had open). If it wasn't a message from Mozilla and I create
-
L775-11N satellite does not power ON battery new
Hello I recently bought a new battery for my Toshiba Satellite L775 11N. When I plug in the battery, the battery led blinking stars (according to the manual, it means that the battery has any energy and does not load). When it is plugged in, I cannon
-
Error code:-17004, could not load DLL or library
Hi all I get the following error message: Error loading step 'x' sequence 'MainSequence' in the file 'y '. Unable to load DLL or external library C:\bin\driver.dll Error code:-17004, unable to load DLL or library. ' Source ' THOMAS '. My main DLL is
-
Unable to install printer HP Photosmart 1000 to Compaq computer laptop, blue screen appears every time that I connect the cable as shown, (USB no problem installing Canon printer via a cable last year) The HP Photosmart 1000 printer worked fine on my
-
Nagging "restart the computer to complete the installation of updates".
Using Windows 7 and had automatic windows updates turned on - I now will choose updates to install. While I use my computer, the dialog box appears constantly on my screen asking you to restart the computer to complete the installation of the update