Reference Dell GX620 Purple screen with ESX 4.1

Similar Questions

• Reference DELL Blade - Ethernet Passthrough with ESX 4

  I have an environment DELL M1000e blade with M610 and M710 servers.  Running all ESX 4.

  Fabric A1: M6220 (the user's LAN Segment)

  Fabric A2: no

  Fabric B1: Ethernet Passthrough (iSCSI to DELL Equallogic PS5000e SAN)

  Fabric B2: Ethernet Passthrough (iSCSI to DELL Equallogic PS5000e SAN)

  All blade on ESX servers see the A1 and A2 as vmnic0 & vmnic1.  If I understand correctly, the M6220.  The problem is that none of the blades see Passthroughs Ethernet which are connected to a Cisco 2970 switch.  Shouldn't B1 & B2 appear on vmnic2 & vmnic3?  It does not show on the side of ESX.

  Any agency with experience with this would be useful.

  Thanks in advance.

  (1) chassis management controller can tell you what is installed.

  (2) Yes, you do.  If you want to connect to what in fabric B, each server needs to connect to fabric B need a Mezz card on fabric B.

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• ESXI 5.1.0 purple screen with openwrt

  Hello

  Very annoying problem. I run an instance openwrt and after a few reboots of the ESXI 5.1.0 shows purple core dump on the console screen.

  I have a G7 HP Proliant DL 360 with the latest firmware update from HP. Also installed the latest drivers from HP. It must be fully supported

  but no cigar.  I have not encountered this problem with ESXI 5.0.0. Anyway around this problem? What type of logging you need me to look at

  in this?

  Best regards K Bryan

  Well... Normally, this isn't for your build... But the purple screen you have looks remarkably similar to this:

  http://KB.VMware.com/selfservice/search.do?cmd=displayKC&docType=kc&externalId=2038767&sliceId=1&docTypeID=DT_KB_1_1&dialogID=547930176&StateID=1%200%20547936335

  Your ESXi comes it up/stay up at all or is this completely down? ... If you have access, you could test with this setting... But as I said, normally if your version is higher than that it should be resolved.

• Reference Dell GX620 Power Supply Question

  What's up guys, I'm new here, and earlier this month my school made me a job on time partial like the public library IT Assistant, because I took IT out classes at my high school. I'm 18, and I know a little about computers. My question is, one of our computers at the library, a GX620, the power supply of the machine went wrong and that we have at the back of the library are detached power supplies for GX520, I asked my professor of computer SCIENCE at the school if it would be prudent to go and try to install the GX520 power in the GX620, but I'm still not sure if it will be a sure idea It would cause a fire? He would burn something inside the PC? My COMPUTER teacher told me to check the amps and volts on feeding 620, and I checked, the GX620 power supply has a maximum of 275 WATTS, while feeding GX520 has a maximum of 220 WATTS, is completely switch the GX620 bad diet, with the GX520 spare?

  And you know that the PSU is bad, how... ?

  First, you will need to know if the spare GX520 PSU's for the same (Tower, Desktop, small, ultra compact) form factor as the GX620 before you can even think to use it because if the form factor of the PC is different, it cannot even between.

  There is a block of POWER W 220 here that says: it adapts GX520 both GX620 Desktop. But if you do not have a GX620 Desktop, this power supply may be a bit low power if the original was 275W.

  That said, you can get a power supply for the GX620 here for less than $30, depending on the form factor. If your existing GX620 power SUPPLY PSU 275W, it seems you might have a small GX620 form, based on the specs of the PSU indicated on this page.

  BTW: Please delete the telephone number of your post. This is a violation of the terms of the forum to use to post personal information, not to mention that it is never a good idea to post personal information in any open forum.

  EDIT: The forum dislikes the second hyper link is here:

  [16] http://www.discountelectronics.com/category?Product_Model=3&category=2&PRODUCT_TYPE = 16

• Reference Dell Touch P2314T - working with active stylus?

  I bought this touchscreen monitor, because I wanted a bigger workspace for the drawing. I used 3 Surface with Pen of Surface until now, but I wanted a bigger screen. So, I bought a monitor Dell Touch P2314T. I was wondering, is it possible to use this monitor with the active stylus Dell here?

  I want to know if the monitor works with the stylus, and if the pressure and palm rejection sensitivity will be sustained. Thank you in advance.

  I do not know. You'll need to read through the Manual for touch screen monitors find these data.

• Reference Dell technicians who work with Microsoft scammers?

  This morning (Monday, 24 October 11) I got a call from a Technician based in India, same scenario, as Microsoft already described here. How did get my phone no and name? Well, Thursday I contacted Dell that I got a problem with my computer, open the windows, the Dell technician says that he'll call me later and asked for my phone doesn't. He called a day later and I said that friends had fixed the problem, which was Friday. Well the first thing Monday morning, I have a Microsoft technician saying that my microsoft certificate had expired and my computer will not work unless I have renewed the certificate and I pay £££. Isn't the air very coincidential? I will never buy Dell products still once, it seems that they pass the information to the crooks or they are scammers themselves!

  If you believe that Dell Technication is also involved, you may call Dell and ask another medium or ask them abuse report and when you contact Dell, you have the file number and you can use it to complain. Also, it could be going since you had call before contacting Dell.

  In this case you can take a look at:

  http://cyberdefend.WordPress.com/2010/05/14/Hello-i-am-from-Microsoft/

  In addition, how did get your phone number and the name, there are several possibilities, take a look at:

  http://cyberdefend.WordPress.com/2011/09/10/i-have-your-phone-number/

• Reference Dell EQL PS4100xv problem with MS SQL replication

  Hello

  I have a Dell PowerEdge server R420 connected to an EQL. Is installed ESXi 5.1 U1 (free version). It is only a data store.

  VM is running Windows 2008 R2 STD with MS SQL 2008 R2 STD. The change in size of database per day is around 2 to 3 MB of base on my daily full backups via the MS SQL backup.

  However, when I throw a replication session between my EQL PROD and DR EQL which size of delta is ranging from 1 GB to 50 GB every time that I run a replication? Interval is about 5 to 10 minutes. I tried 20 minutes also the size to replicate is erratic.

  Why is so huge its more than 1000 MB per replication.

  Hope someone can help me with that.

  Thank you

  Paul

  Re: Storage Direct.  Yes, if you configure these volumes SQL replication, only the changed data will be included.  Only VM will see to all the files in the data store.   However, you still want to replicate your VMFS, but not as often as SQL datastore.

  Re: optimize.  Article I included has the registry setting you need.  This works for all storage formatted to NTFS.

  In addition, when you format the SQL data / log volumes, has the NTFS 64 K cluster size.   The default value is usually 4 or 8 K.  This will align all the writings and readings on the 64K of distribution of the EQL table size.   This improves performance of I/o.

• Reference Dell refurbished Latidude 2120 with Windows 7 Home Premium

  Why my renovated 2120 Latidude from Dell with Windows 7 Home Premium except Windows 7 Ultimate as a pure settled instead of an upgrade? My product key in the activation will not work now

  Because it is not a supported method. When you upgrade from one Windows 7 edition to another, you must use the upgrade wizard level Express Windows.

  http://www.notebooks.com/2009/10/26/Windows-7-anytime-upgrade-%E2%80%93-unlocking-more-benefits/

• Reference Dell E520 no screen

  My dell e520 desktop computer has been for about 3 years. When I turned it on I have no video signal. The monitor that I use works. In addition, the cables and the monitor works on my laptop. What could be the problem?

  LEDs 3 and 4 indicate a memory failure, so buy a module indicates you have found wrong. You should try with only two modules in slots 1 and 2.

• Reference Dell Webcam Central starts with Skype

  I have a Dell laptop with Win 7 and Skype 6.1.  Whenever I start the Dell Webcam Central from the Skype application.  Can someone tell me how to prevent it?

  Concerning all the

  Gary

  Gary,

  Right-click on the Dell Webcam Central icon in the test system, near the clock.

  Clear the check boxes that you do not want to happen.

  

  Rick

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• white screen with purple lines?

  Hi, I just tried to update my iphone 5 to latest IOS and after the black screen with the Apple logo and the loading bar finished it went to a screen with edges white and dark with purple in the darkest bits lines.  I tried to plug it into my pc and go through the itunes app, but it does not record that the iphone is also my lock button is broken so I can't try to do a soft reboot. No one knows what it is and how I can fix this problem? Please help me

  Try to see if iTunes detects the phone into recovery mode: http://support.apple.com/kb/HT1808. This procedure requires the use of the home button but not the lock button, it should be OK.

• How to connect a Dell's VGA screen to my Mac Pro with cinema display 27 inches

  I have a Mac Pro with a display of 27 "cinema, and I want to connect a VGA Dell monitor I have laying around. I want to have two monitors to my larger work. How can I do this? What should I do?

  Hello esala23,

  Thank you for using communities of Apple Support.

  I see that you want to connect another screen on your Mac. You will love it, it's the best thing that I have to make my job easier and more efficient. Take a look at this article to get started with a second screen on your Mac Pro.

  OS X El Capitan: connect multiple monitors to your Mac

  You don't mention what model Mac Pro, but assuming that it is the most recent, this article can be useful:

  Use multiple screens with your Mac Pro (end 2013)

  Best regards.

• I tried to clean my screen with moisture and got some inbetween can I take my screen out I have a Dell laptop

  I cleaned my laptop screen with a Kirkland optical care kit, it's a lens clearner and I got some inside my

  my screen humidity can I take the four little screws ot of the corners to get to the screen, I have a Dell laptop

  I thought using it will clear up, but must have a leak.

  Larry at * address email is removed from the privacy * thank you

  I cleaned my laptop screen with a Kirkland optical care kit, it's a lens clearner and I got some inside my

  my screen humidity can I take the four little screws ot of the corners to get to the screen, I have a Dell laptop

  I thought using it will clear up, but must have a leak.

  Larry to * address email is removed from the privacy * thank you

  Contact Dell support. But, you've probably ruined for good.