Purple screen

Similar Questions

• Authentication failure on the purple screen when trying to access MSN games

  I have seen similar questions in the forums, but can't see all the answers on what to do.

  When I click on my bookmark/link to the home page and you try to connect, I get a purple screen saying:

  You have reached this page due to errors in your authentication

  You can choose from the following sites in the area to continue

  • I don't know, or none of the above, (just exactly what this refers to?)
  • I was trying to buy a game
  • I tried to play a game at Zone.com
  • I tried to play a game in MSN Messenger

  None of the links work. From the home page, has managed to access a help screen - even if my username of games was not displayed.  Despite the removal of temporary files & cookies and make sure Active X, etc is enabled on Internet options, when I try and sign again, I will re-directed to the purple screen.

  In addition, I can not get access to my account, nor my badges - so I can't change anything, even if I wanted to. Everything that happens? Is there something in the Internet Options, which must be enabled (which I missed it). Someone at - it ideas on how to overcome this problem. I don't think it's because of the upgrade to Windows 7 from Vista, because I was able to play my usual game immediately: this problem started 3 days ago.

  Hi Janey,

  Were you able to navigate on this site before?

  You did any change of computer or internet explore?

  Have you changed your modem or router?

  You can follow the procedure as described below:

  Internet Explorer is slow? 5 things to try
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Security zones: adding or removing websites

  http://Windows.Microsoft.com/en-us/Windows7/security-zones-adding-or-removing-websites

  Note: Add all the sites on which you face the error

  If you are still having the same problem, you may need to contact your internet service provider to reset your internet settings.

  Kind regards

  Kiki

• Windows 8 shows a purple screen flashing after the start. I can't access the start menu and the desktop... How can I fix it?

  It worked fine for a day. Then this happened.

  Mine 8.1 flicking of screen between the office and purple screen constantly, occurred because of a Windows update that is has happened when I wasn't paying attention.

  I just went into recovery menu taking into turning computer turned off and before you turn on the computer, press and hold the F8 key

  -Press F8 all the time until the "Please wait" is displayed on your screen

  - Then it will say recovery

  -See Advanced repair options

  Were able to:

  -Troubleshooting

  -Advanced options

  -System restore

  I chose a restore date before that I did my last windows update and then flew it worked.

  Then I created a good restore point and reinstalled the update and everything was fine. I hope this helps someone.

  I guess the update got initially interrupted either by loss or hiccups in the Wi - Fi or DSL and something do not go right.

• Host VMware 5.5 - purple screen error

  Hello.

  Spent months last im getting a purple screen error I have attached it. I called dell since we have the guarantee of the server after I showed the them.the screenshot... they said his mistake of vmware. Please help me what error is.

  Hello and welcome to the community:

  The first line megasas_reset_fusion indicates there is a problem with the driver megasas

  Looks like on there is a known issue with the MegaSAS driver and they recommend you upgrade the version of the driver at: 6.506.51.00.1vmw and later

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2052368

  Suhas

• Purple screen on ESXi 5.5 for HP in preparing the AD for Exchange

  Hi,.
  
  we have a installed ESXi () ESXi 5.5 for HP - Image profile: HP-ESXi - 5.5.0 - iso - 5.72. 3) for both servers (DC and Exchange).

  
  

  Preparation of Active Directory for Exchange (). \setup/PrepareAD /IAcceptExchangeServerLicenseTerms /OrganizationName.: "Enter the name of Org Exchange"), we get a
  

  Purple screen (photo attached). And that already for the second time !
  

  No matter which solve this problem or knows how to solve this problem.

  Thanks in advance.

  Alexander

  

  Looks like some sort network problems concerning virtual vnic in the prompt that is the cause.  See the Article KB KB VMware: VMware ESXi host 5.x undergoes a screen to diagnosis purple mentioning E1000PollRxRing and E1000DevRx

  VFK

• ESX 5.5 on Supermicro purple screen

  Hi all!

  A few days ago one of the my host periodically crashed on purple screen.
  Home - SERVER Supermicro SYS-6017R-N3RF4 +: 2 x Intel Xeon E5-2630
  5.5 ESXi

  Error codes:

  cpu15:33988) WARNING: cannot remove USB storage adapters removed.
  CPU21:33436) UCS 0SSL: esx_sci_driver_oem_parms_set: failed to set OEM params 0 x 22

  This host has never had a USB devices!
  What continues?

  Help please

  Do not disable permanently. Disable the option of USB devices in the BIOS and then power on the host computer. (Now if he has vitiated registrations will be missing). Then return to the USB option in the BIOS and enable them and test the status of your server.

  All you need is 2 reboots downtime.

• Purple screen on HOST with Esxi 5.5

  Good afternoon

  I'm upgrading from 5.1 to 5.5 esxi servers.

  I've updated 5 servers without problems but the sixth, I had a problem.

  This morning when I've updated a host everything worked fine. Suddenly, an hour later, host was unreachable and when I checked in the server room

  I got a purple screen. I manually restarted the host, and everything seems to work.

  In my research, one user has this kind of problem, and it's cyclical. I'm doing research in this type of case a way to fix this bug.

  I took a quick glance at 2 positions:

  VMware KB: ESXi hosts with larger workloads can generate partial core dumps

  VMware communities: All content-all communities

  Is that someone already had this kind of screen? Understand what the purple screen?

  Kind regards

  Definitely check your versions of firmware on your server, BIOS, NETWORK card, card Raid array.  What type of server is it?

• A purple screen of death (.. .exception 14 to the world...) with Vsphere 5.5 and Windows 2012R2 Server (problem solved)

  Hello

  I think it is good to add here...

  I started now to migrate my server under Windows Server R2 2012. The virtual environment is vSphere 5.5 HP DL380G7 servers.

  Today, I have solved a hard crash of the host server after you have added a server Win2012R2. The symptoms are CMTF (purple screen of death) to the host (I was pleased that I have disabled the new customer HA; that would be a blow my other hosts).

  Basic message was "...". exception 14 worldwide xxxx... ».

  I solved it very simple by changing the E1000 to VMXNET3 virtual network card. For me, it looks like a bug to develop by VMware in the next versions. For now it works.

  I hope this information helps you!

  Good luck!

  See this article.

  VMware KB: ESXi 5.x host undergoes a purple diagnosis with errors E1000PollRxRing and E1000DevRx screen

  Frank

• LSI-9210-8i (LSI SAS 2008) written very unstable and purple screen

  Hello!

  I have a serious stability problem and I am not able to understand how to solve.

  I have an IBM ServerRaid M1015 (oem of a LSI-9220-8i version) I reflashed with the ISIS software (9210-8i IT mode, but see below for details).

  When I started with ESXi and create a virtual machine with a big virtual disk (90% of the physical disk), the creative process hangs after some time (about 10% for a vdisk 145GB on a 160 GB pdisk)

  and I get a lot of 'stuff' in the file vmkernel.log (see attachment logfiles). Finally, ESXi will be purple screen and die.

  I seem to be able to make the small diskaccesses with no problems.

  To test if it's a hardware problem, I have:

  • I did a new install of Debian - 6.0, and there everything works without problem.
  • I only did a new install of Solaris-11u1 no problem here too: the controller was FAST!
  • I tried to move the controller to another host (HP DL120 G6), same problem here.
  • I even tried to buy another controller (which worked perfectly with the included IBM software but after that I have reflashed with the LSI-9210-8i IT firmware, that he was not only the first)
  • I tried a cable cutter instead of HP backplane to be sure it wasn't the bottom of basket that gave me problems.
  • I tried to move the map to another location PCIe cable 8087 to the other port on the controller card.

  The system configuration:

  • VMware: ESXi - 5.1.0update1 (build 1065491)
  • Machine: HP ML150 G6 (12 GB of memory, BIOS: ø21) and HP DL120 G7
  • Controller: IBM M1015 reflashed to LSI-9210-8i (2108it.bin firmware Version: 16.00.00.00 release date: February 27, 13, BIOS-7, 31)
  • ESXi drivers:
    Before the update:

  # esxcfg-scsidevs - has | grep mpt

  vmhba0 mpt2sas link-n/a sas.500605b002aa7ea0 (0:5:0.0) LSI Logic / Symbios Logic LSI2008

  # vmkload_mod s mpt2sas | grep Version

  Version: Version 10.00.00.00.5vmw, version: 799733, Interface: built 9.2: 1 August 2012

  # vmkload_mod s mptspi | grep Version

  Version: Version 4.23.01.00 - 6vmw, version: 799733, Interface: built 9.2: 1 August 2012

  Update:

  # esxcli software update v vib - /tmp/tmp/scsi-mpt2sas-16.00.00.00.1vmw-1OEM.500.0.0.472560.x86_64.vib

  Result of the installation

  Message: The update completed successfully, but the system must be restarted for the changes to be effective.

  Restart required: true

  VIBs installed: LSI_bootbank_scsi - mpt2sas_16.00.00.00.1vmw - 1OEM.500.0.0.472560

  VIBs removed: VMware_bootbank_scsi - mpt2sas_10.00.00.00 - 5vmw.510.0.0.799733

  VIBs ignored:

  After update:

  # esxcfg-scsidevs - has | grep mpt

  vmhba0 mpt2sas link-n/a sas.500605b002aa7ea0 (0:5:0.0) LSI Logic / Symbios Logic LSI2008

  # vmkload_mod s mpt2sas | grep Version

  Version: Version 16.00.00.00.1vmw, Build: 472560, Interface: built 9.2: February 28, 2013

  # vmkload_mod s mptspi | grep Version

  Version: Version 4.23.01.00 - 6vmw, version: 799733, Interface: built 9.2: 1 August 2012

  I have attached the log files from the system. Is anyone able to point me in a direction for a fix? Or any who have used IBM M1015 (in mode IT) with VMware - 5.1

  This starts to become just a little frustrating! :-)

  I cannot conclude 100% but it seems to be a driver problem ESXi or the combination of firmware and driver.

  Best regards

  -Morten Hermansen, Fanitas Green

  Hello!

  It seems that VMware ESXi 5.5 have a conflict pilot with different controllers in the same machine at the same time.

  I have been using the LSI AND the controller on the motherboard for extra drive supported.

  When I only disks on the controller LSI wanished of problems!

  I have why it worked in the Debian and Solaris with disks on both controllers, but not in ESXi. I tried to level the firmware and drivers of LSI, but he will get unstable on me when using different types of controllers at the same time.

  Best regards

  -Morten Hermansen, Fanitas Green

• Purple screen any attempt to install ESXi 5.0

  "I'm trying to install ESXi 5.0, but don't have purple screen 'any place on the disk for the dump data' Debugger waiting (World 2048) no port for the remote debugger ' I think I know what it means and have attempted to examine Global Knowledge for the history or recommendations.

  Thanks in advance for your answer

  Colombia-British

  It seems that you might have the same problem, as described in this thread - http://communities.vmware.com/message/2200195#2200195.

• ESXI 5.1.0 purple screen with openwrt

  Hello

  Very annoying problem. I run an instance openwrt and after a few reboots of the ESXI 5.1.0 shows purple core dump on the console screen.

  I have a G7 HP Proliant DL 360 with the latest firmware update from HP. Also installed the latest drivers from HP. It must be fully supported

  but no cigar.  I have not encountered this problem with ESXI 5.0.0. Anyway around this problem? What type of logging you need me to look at

  in this?

  Best regards K Bryan

  Well... Normally, this isn't for your build... But the purple screen you have looks remarkably similar to this:

  http://KB.VMware.com/selfservice/search.do?cmd=displayKC&docType=kc&externalId=2038767&sliceId=1&docTypeID=DT_KB_1_1&dialogID=547930176&StateID=1%200%20547936335

  Your ESXi comes it up/stay up at all or is this completely down? ... If you have access, you could test with this setting... But as I said, normally if your version is higher than that it should be resolved.

• Purple screen United immediately after ESXi 5 loading bar when starting the installation disc.

  I have a client that is running ESX 4.0 on a compatible with ESXi 5 host.  When I went to upgrade the host to ESXi 5 I ran into a problem, I have never seen elsewhere.  I started on the disk and screen with the status bar at the top is fine.  Immediately after loading, before showing always the yellow background or license agreement, he throws a Uni purple screen and without words.  If you leave it for about 20 seconds, then the screen goes black with gray blocks randomly everywhere.  I tried with another download and CD but I get the same results.  I couldn't find anything on purple screens without the current text.  Any help would be greatly appreciated!

  Did you check if the version of the BIOS of the host must be updated in order to run ESXi 5.0?

  André

• Simulate the purple screen

  Is it possible to simulate the purple screen of death?  If so, how?

  Thank you.

  If it's for ESXi, you can do it using vsish - http://www.ntpro.nl/blog/archives/1388-Lets-create-some-Kernel-Panic-using-vsish.html

  If you are looking for classic ESX, you can do it with vsish, but you will need to get a package of VMware debugging, because vsish is not available on ESX classic by default.

• ESXi 4.0 Update 2 guests can present a purple screen after vCenter Server is upgraded to 5.0

  The KB article http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & externalId = 2007269 said that with the 4.1 update 2, you will discover a purple screen after the upgrade of the server vCenter.

  Does anyone know if all 4.1 < U3 are also affected?  What about 4.0?  I need to know if I should plan a lot of upgrades to the host before our upgrade to vCenter.

  Thank you!

  from my understanding, it's just bound to 4.0U2, however, you can provide feedback to the KB article.

• Purple screen after installing ESXi 4, pf exception (14) in the world

  Hello

  I get a purple screen after starting the esxi host 4. I get the following exception: exception (14) in the xxxx world pf

  I tried the esxi version 4 with update 1 and without. both had the same problem...

  The server is a "new" hp proliant dl120g6...

  Does anyone have an idea to solve this problem?

  Hello

  Welcome to

  Everything seems to point to the sfcbd process (CIM providers). But it is a hypothesis. All this :).

  Running a version of esxi HP custom computers no HP support can produce weird effects. For this reason, it is highly public using this type of installation.

  I'm not really an alternative for what you want. To monitor (in a tight way) on esxi, you must use a supported HP computer. If this isn't the case, you must use a version of esxi vanilla without waterproof hardware monitoring.

  Please, remember to mark a useful or appropriate response.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog