ESXi 5 Disaster Recovery Design
Hi all
Was hoping someon might be able to point me in the right direction. We are currently running vSphere Essentials 5, more with 2 ESXi hosts in our production environment. The 2 hosts are connected to a PS4100XV Equallogic. We have an other PS4100XV in our Dr site and plan to replicate the production SAN volumes to DR over a 100Mbps fiber link. We will install our final host at the DR site.
Ideally, in a DR scenario, I would like to host in the Dr to point to the local SAN Equallogic DR. However I am not sure if the host must be in the same cluster as production or separate. Essentials plus allows only 3 guests, so we cannot have a second group.
In addition, if we vMotion servers to Dominican Republic, they would still be running from the production data store unless we change the data store, so of course, but then not not sure how that would influence the Equallogic replication.
I think we could just look for the data store on the Equallogic in DR, then add servers to the inventory, but do not know how this would impact vCenter. We have vCenter server works as a virtual machine.
I don't know there are a few best practices for this scenario and would be interested to hear if anyone has any ideas on how to address the issue? We are small enough environment and have only 15 servers.
Thank you!
If we were cold migrate virtual machines to host ESXi DR site only, we could theoretically promote volumes on the site of DR EQ and then put on virtual machines?
If you migrated cold VMs to the ESXi host at the DR site, they will have to find on VMFS data warehouses that the ESXi host already has access to. You only need to promote the replica sets created EQ, if you wanted to access the replicated version.
Tags: VMware
Similar Questions
-
ESXi 4 disaster recovery scenario
We are all new to VMware. What we have is only the ESXi hypervisor (running on a Dell PowerEdge R900) and use the VMware Client software for the management of VM of comments.
The question is - is it possible through some utilities VM to create a backup of the hypervisor configuration settings?
We use a third-party utility to save the hosts Server VM (Windows Server 2003), but is not able to do this for the hypervisor. Now if there is an accident, I have to re - install the hypervisor from scratch, and I think that all settings currently in the hypervisor, which specify the perameters and virtual host settings would be lost and will have to either be recovered some form of download of backup or a file snapshot of the hypervisor or reinstalled from a local list of settings of the hypervisor.
If someone has a link to the relevant tutorial or explanation for the recovery of the parameters hypervisor system crash, your help is greatly appreciated.
You can use something like Winscp or pscp (PuTTY utils part).
-
Can we create a Vlan without SRM for disaster recovery testing
We are working on plans for our recovery after disaster in our VMWare environment. We have a recovery Site which has a NETAPP file server we reproduce our VM data warehouse and SQL data. We have no RS, but must be able to test if possible disaster recovery with Production upwards. Is it possible to configure a VLAN and do a test isolated Dr. without SRM? Thank you
Welcome to the VMware communities forum.
You can create a VLAN without SRM. You will need to properly set up your network hardware, and then you add new virtual machine port groups to your ESXi hosts. You can then save the virtual machines by giving them a different name and starts in isolation. When you attempt to save the virtual machines they will always have a reference for the port VM production group so you'll want to make sure you update you turn on.
-
CUCM and IM &; P 10.5.2 disaster recovery
Come see if I any who can sanity check it.
I noticed the other day on my IM & P servers that my last successful backup was 132 days ago. Now on my CUCM I do daily backups during the week, UCM, CDR_CAR, and IMP_AND_PRESENCE backup and I can see all 3 are saved OK to my remote destination.
For me, this sounds like my Pservers & IM are saved through the master agent of the CUCM disaster recovery if the backup of the annex on IM & P servers themselves.
It would also sound to me that I should be able to retrieve my IM & P servers, through backups made by CUCM.
I can't seem to find a straight answer in the Disaster recovery Guide is.
anyone can shed some light on this? Very appreciated
Dennis, your understanding is quite correct in this regard. IM & P needs to connect to the master DRF on the CUCM pub for the mechanism of the DRS only it doesn't have its own master DRF starting version 10.x when added as a subscriber to the cluster of CM.
Infact, there was a known below defects for a problem in which IM & P will not appear while you take the backup of the Publisher CUCM DRS:
https://Tools.Cisco.com/bugsearch/bug/CSCus64888/?reffering_site=dumpcr
Concerning
Deepak
-
Problem with different ASM disaster recovery start - new
Hello together,
I had an old net here about it but now will not solve the problem with the points in the old thread. Here's the old: https://community.oracle.com/thread/3608049?start=0 & tstart = 0
I'm doing a disaster recovery with the 'apex11A' on a new server database, which has an another ASM starts. The old man starts is '+ DGA112_1' and '+ FRA112_1', newcomers are called '+ DATA_QUM169' and '+ FRA_QUM169 '. I changed the settings in the spfile restored by writing in a pfile file and creating the spfile from pfile.
I tried in several ways. First lay the new ASM with RMAN to the course:
run { SET NEWNAME FOR DATABASE TO '+DATA_QUM169'; restore database until LOGSEQ 24286; switch datafile all; switch tempfile all; recover database until LOGSEQ 24286; }
Then I tried it in RMAN by defining the new ASM for each data file:
run { SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169'; restore database until LOGSEQ 24286; switch datafile all; switch tempfile all; recover database until LOGSEQ 24286; }
Then I tried the bot in one:
run { SET NEWNAME FOR DATABASE TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 1 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 2 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 3 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 4 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 5 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 6 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 7 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 8 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 9 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 10 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 11 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 12 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 13 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 14 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 15 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 16 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 17 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 18 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 19 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 20 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 21 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 22 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 23 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 24 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 25 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 26 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 27 TO '+DATA_QUM169'; SET NEWNAME FOR DATAFILE 28 TO '+DATA_QUM169'; restore database until LOGSEQ 24286; switch datafile all; switch tempfile all; recover database until LOGSEQ 24286; }
Whenever I get one
Starting restore at 03-FEB-16 using channel ORA_DISK_1 creating datafile file number=1 name=+DATA_QUM169 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 02/03/2016 16:20:41 ORA-01180: can not create datafile 1 ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253'
The backuppiece which I bring are correctly defined with
RMAN> catalog backuppiece '/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1', '/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1'; cataloged backup piece backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1 RECID=3779 STAMP=902851052 cataloged backup piece backup piece handle=/usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1 RECID=3780 STAMP=902851052 RMAN> list backup; List of Backup Sets =================== BS Key Size Device Type Elapsed Time Completion Time ------- ---------- ----------- ------------ --------------- 3779 52.61M DISK 00:00:00 03-FEB-16 BP Key: 3779 Status: AVAILABLE Compressed: YES Tag: TAG20160203T145340 Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m4qt0mnk_1_1 List of Archived Logs in backup set 3779 Thrd Seq Low SCN Low Time Next SCN Next Time ---- ------- ---------- --------- ---------- --------- 1 24285 11073415926066 03-FEB-16 11073416327345 03-FEB-16 1 24286 11073416327345 03-FEB-16 11073416678326 03-FEB-16 BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 3780 Full 813.86M DISK 00:00:00 03-FEB-16 BP Key: 3780 Status: AVAILABLE Compressed: YES Tag: TAG20160203T145042 Piece Name: /usr/local/oracle/product/11.2.0.4/dbs/m3qt0mi2_1_1 List of Datafiles in backup set 3780 File LV Type Ckp SCN Ckp Time Name ---- -- ---- ---------- --------- ---- 1 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/system.1423.788355253 2 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/sysaux.1422.788355259 3 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/undotbs1.1359.788355263 4 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/users.1362.788355273 5 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4.1369.788356305 6 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex4_files.1366.788356317 7 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms_archiv.1358.788357229 8 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/planwerte.1357.788357243 9 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_prod.1352.788456613 10 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais.1353.788456763 11 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mms.1354.788456995 12 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/externe_wirk.1355.788457525 13 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2mt.1356.788458151 14 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/btdb_read.1351.788458291 15 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329 16 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657 17 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/macmon.1340.788458691 18 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais_read.1339.788458725 19 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/mais2srm.266.788458799 20 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859 21 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/quickcheck.1338.788458887 22 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/switch.1337.788459139 23 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/veit_r.1333.788459167 24 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/test-btdb.1298.795097725 25 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11dev.986.874230931 26 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/apex11devbt.985.874230963 27 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/hrbew.1083.851007823 28 Full 11073416676796 03-FEB-16 +DGA112_1/apex11a/datafile/optimadata.1032.865951029
I also tried to put the new ASM SQL:
SQL*Plus: Release 11.2.0.4.0 Production on Wed Feb 3 16:04:05 2016 Copyright (c) 1982, 2013, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production With the Partitioning, Automatic Storage Management and OLAP options SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/system.1423.788355253' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 1 - new file '+DATA_QUM169' not found ORA-01110: data file 1: '+DGA112_1/apex11a/datafile/system.1423.788355253' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 2 - new file '+DATA_QUM169' not found ORA-01110: data file 2: '+DGA112_1/apex11a/datafile/sysaux.1422.788355259' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 3 - new file '+DATA_QUM169' not found ORA-01110: data file 3: '+DGA112_1/apex11a/datafile/undotbs1.1359.788355263' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/users.1362.788355273' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 4 - new file '+DATA_QUM169' not found ORA-01110: data file 4: '+DGA112_1/apex11a/datafile/users.1362.788355273' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4.1369.788356305' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 5 - new file '+DATA_QUM169' not found ORA-01110: data file 5: '+DGA112_1/apex11a/datafile/apex4.1369.788356305' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 6 - new file '+DATA_QUM169' not found ORA-01110: data file 6: '+DGA112_1/apex11a/datafile/apex4_files.1366.788356317' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 7 - new file '+DATA_QUM169' not found ORA-01110: data file 7: '+DGA112_1/apex11a/datafile/mms_archiv.1358.788357229' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 8 - new file '+DATA_QUM169' not found ORA-01110: data file 8: '+DGA112_1/apex11a/datafile/planwerte.1357.788357243' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 9 - new file '+DATA_QUM169' not found ORA-01110: data file 9: '+DGA112_1/apex11a/datafile/btdb_prod.1352.788456613' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais.1353.788456763' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 10 - new file '+DATA_QUM169' not found ORA-01110: data file 10: '+DGA112_1/apex11a/datafile/mais.1353.788456763' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mms.1354.788456995' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 11 - new file '+DATA_QUM169' not found ORA-01110: data file 11: '+DGA112_1/apex11a/datafile/mms.1354.788456995' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 12 - new file '+DATA_QUM169' not found ORA-01110: data file 12: '+DGA112_1/apex11a/datafile/externe_wirk.1355.788457525' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 13 - new file '+DATA_QUM169' not found ORA-01110: data file 13: '+DGA112_1/apex11a/datafile/mais2mt.1356.788458151' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 14 - new file '+DATA_QUM169' not found ORA-01110: data file 14: '+DGA112_1/apex11a/datafile/btdb_read.1351.788458291' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 15 - new file '+DATA_QUM169' not found ORA-01110: data file 15: '+DGA112_1/apex11a/datafile/hwdb2acs.1343.788458329' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 16 - new file '+DATA_QUM169' not found ORA-01110: data file 16: '+DGA112_1/apex11a/datafile/hwdb2sccm.1341.788458657' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/macmon.1340.788458691' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 17 - new file '+DATA_QUM169' not found ORA-01110: data file 17: '+DGA112_1/apex11a/datafile/macmon.1340.788458691' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 18 - new file '+DATA_QUM169' not found ORA-01110: data file 18: '+DGA112_1/apex11a/datafile/mais_read.1339.788458725' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 19 - new file '+DATA_QUM169' not found ORA-01110: data file 19: '+DGA112_1/apex11a/datafile/mais2srm.266.788458799' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 20 - new file '+DATA_QUM169' not found ORA-01110: data file 20: '+DGA112_1/apex11a/datafile/outdating_sap_user.267.788458859' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 21 - new file '+DATA_QUM169' not found ORA-01110: data file 21: '+DGA112_1/apex11a/datafile/quickcheck.1338.788458887' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/switch.1337.788459139' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 22 - new file '+DATA_QUM169' not found ORA-01110: data file 22: '+DGA112_1/apex11a/datafile/switch.1337.788459139' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 23 - new file '+DATA_QUM169' not found ORA-01110: data file 23: '+DGA112_1/apex11a/datafile/veit_r.1333.788459167' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 24 - new file '+DATA_QUM169' not found ORA-01110: data file 24: '+DGA112_1/apex11a/datafile/test-btdb.1298.795097725' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 25 - new file '+DATA_QUM169' not found ORA-01110: data file 25: '+DGA112_1/apex11a/datafile/apex11dev.986.874230931' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 26 - new file '+DATA_QUM169' not found ORA-01110: data file 26: '+DGA112_1/apex11a/datafile/apex11devbt.985.874230963' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 27 - new file '+DATA_QUM169' not found ORA-01110: data file 27: '+DGA112_1/apex11a/datafile/hrbew.1083.851007823' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form SYS@apex11A> ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169'; ALTER DATABASE RENAME FILE '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' TO '+DATA_QUM169' * ERROR at line 1: ORA-01511: error in renaming log/data files ORA-01141: error renaming data file 28 - new file '+DATA_QUM169' not found ORA-01110: data file 28: '+DGA112_1/apex11a/datafile/optimadata.1032.865951029' ORA-17503: ksfdopn:2 Failed to open file +DATA_QUM169 ORA-15045: ASM file name '+DATA_QUM169' is not in reference form
But my new database will not set the new ASM and I have no why.
The db_create_file_dest parameter is set correctly, so I think that:
NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_create_file_dest string +DATA_QUM169
I forgot something? Would be nice to get help ...
A big thank you and best regards,
David
Your data checkpoint SCN file are in the LOW and HIGH range of the SNA for SEQUENCE 24286.
Therefore, your UNTIL clause should be 24287 SEQUENCE up to THAT.
Hemant K Collette
-
OBIEE Disaster Recovery can be configured without CARS and shared storage?
Hi people,
As say the topic, I'm looking for advice on disaster recovery. What I find in the docs pointing me to the high availability configuration, or maybe I'm simply not find the docs I'm looking for. And it always points to the RAC, etc. of shared storage. My database is already configured to Dataguard and I want to do things this way, with a recovery site which isn't always upwards and a part of a cluster (although it's very well as long as the CAR is not involved), I'm looking for some feedback on how people do things. I have 11.1 now, but will be upgrading to 12.2 soon. Just a straight stitch to the documentation would be useful if I'm missing just that.
Thank you
-Adam
Since you have already configured Dataguard and in a DR situation, you will be switching/switch on your course in standby mode and it will active db. All this is fine. You can do the same with instances of weblogic OBIEE. You can clone your binaries installed using tools provided by Oracle cloning, or build binaries from weblogic with the accurate determination of drive on your Dr. use the pack of weblogic server and then unzip tool to archive your entire weblogic domain and it Unarchive in your prepared DR server.
Now, you have to just challenge the hostname (s) of your domain to point to your database JDBC data sources and weblogic.
To facilitate the task, you can change the host name used by weblogic to host alias that can be remapped in DNS during DR. Similarly, you can change the JDBC connection string so that it can automatically select the active database as long as you use a database instead of a SID service name in the connection string.
You will need to regularly make a pack on your weblogic domain in order to maintain an up-to-date backup of your domain proximity. Similarly, if you have reports that are stored on the file system, they must also be backed up regularly so that they can be restored.
-
Disaster recovery with replication for VSphere
Am just test VSphere 5 of replication. with a couple of test VMs
The replication process works very well
What I want to know is the process to recover a VM replicated to new hardware in the case of the complete failure of the original host and/or data store
In essence, disaster recovery.
Are there other parts (software), that I need to take the replica VMDK and files related to re - create a new virtual machine on a new host
Steve
Yes, because it will be all your hard and .vmx files.
-
Hi all
I worked at different scenarios for customers supported the migration of material.
I found "Disaster recovery (replace the user's machine)" will perform the same action as the 'migration Hardware' option Assistant in common.
Please let me know if the two are same with operations or any difference is there?
Essentially, they do the same for the different use cases. The only difference is the default option selected for the computer name in the wizard. Migration of HW, it is 'Set Name'. In the Assistant of Dr., is "to keep the name of CVD.
-
vCloud Air Disaster Recovery - vSphere replication of specific records
In the most recent documentation for vSphere replication, the ability to select specific disks when you replicate a single workload is described:
Documentation Centre of vSphere 5.5
However, in the videos of vCloud Air DR, this option is not currently available. Is - this specific to Air DR vCloud or some videos of previous versions?
vCloud Air Disaster Recovery: configuration of the Virtual Machine replication - YouTube
Answer: No.
-
vCloud Air - Disaster Recovery - Europe - UK
Please can someone advise where Europe - UK datacentres are based, whereas the vCloud service Air Disaster Recovery.
All links related to security and compliance would be welcome.
The service is available for re - sale by any partner VMware or only those with a certain specialization / accreditation.
Thank you
Hi Ben,
Answers to your questions:
-You can see the vCloud updated map to know where on the Web site: vCloud locations - VMware vCloud Air Air
If you need a more specific location (for put in a private line, MPLS/VPLS), you can see them here: Direct Connect - VMware vCloud Air
-Info security & compliance is here: reports of Certifications of compliance - VMware vCloud Air the AT101 full compliance are available under NDA - you will need to contact your VMware representative for this.
-Partners VMware must reach their hybrid Cloud competence to transact
Hope that helps!
Jenny
-
Procedures and guidelines for Disaster Recovery (DR)
Hi all
Our TI auditor asked me to submit/provide procedures for guidelines for disaster recovery.
I tried Google, but the process docs seem so vast and complex.
We have a dataguard configuration. Can I give him to the contrary the docs on how to recover/restore using Data Guard?
Can you share me link to good documentation on the recovery?
Thank you
Petra k.
> We have a dataguard configuration
Generally, the documentation is created with the Setup program. Documentation describing the configuration. Documentation detailing the procedures for different situations. Documentation that lists the commands to use and the expected responses for commands. Documentation that indicates the error handling methods if you try the commands.
Your dataguard configuration is incomplete without these documents.
Hemant K Collette
-
We have in time real copy changes of the drive Bay to PROD server to the drive Bay PREPRODUCTION server for database servers, server FDM and Essbase servers.
Now my question is, can the above PREPRODUCTION server that receives the data from PROD in real-time, act as a UAT Server?
By UAT server, I mean, the developers will make changes to metadata and rules in DEV server and even load in the above mentioned PREPRODUCTION server and when successful, the same will be loaded into the Production finally.
Now could you please tell me if the PREPRODUCTION can act as a UAT for them, as it is copied from the PROD in real-time?
Thank you
Siva Bhojan
In reality, it will not work.
Assuming that your disaster recovery application works by taking tables and copy those above, you will copy the metadata/rules with her. If you do not copy those, then your backup is not valid for a disaseter recovery.
Since the metadata/rules are copied from PROD, the work done by developers would be replaced.
If your Backup DR process moves only data/logs and reconsolidate, so yes, in theory, it could work, but your DR process missing crucial files needed to make the application work. Not to mention, there is the possibility of the backup fails when metadata is out of synce between the two.
All in all, not something I would say. You are better to keep separate UAT and DR.
-
Physical-TO-virtual disaster recovery
Hi, what would you do in this scenario?
A heterogeneous set of physical servers (with Linux or Win) owned and operated by several customers in different locations.
A vSphere on a centralized site infrastructure.
I wish I had in my infrastructure, a VM power off to each of the remote servers in physics and to keep the image of VM in phase with the remote disks.
In the case of a remote site explodes, the corresponding virtual machines are started (automatically or manually) as a quick and effective disaster recovery solution...
Forget the problems of network/IP of this scenario, is there a way or a 3rd party software to keep a VM'd synch with a remote server physical?
Thank you!
PlateSpin Protect will be repeated. You place the platespin on the physical server agent and you can replicate the server to an image file or a virtual machine. You can update the image or VM file on a regular basis. It comes from platespin powerrecon product.
Check it out.
http://www.PlateSpin.com/products/protect/
Don't forget to leave some points for messages useful/correct.
-
sys and system schema are expired &; locked after disaster recovery.
Hi all
In one of our development database, I conducted disaster recovery and he succeeded.
After completing the recovery thre, sys and system schema are expired & locked.
So, I'm not able to carry out any type of operation that is performed by the user sys and system.
Database Version: 11g r2
Operating system: RedHat 5.5
Please please suggest me how can I solve this problem?
Thank you
Pitard.It might be
What is the status of the users in the source database from which you have taken backup? Maybe he has so locked even after performing refresh status remains the same.
See your profile stats below. All have remained unanswered. You simply test patience? If this isn't the case, close all threads as answered. Clean up the forum.
User profile for pitard
Pitard
Handle: Pitard
Status level: Beginner
Join date: March 4, 2010
Total messages: 9
Total Questions: 8 (8 open)
Viren namePublished by: CKPT on February 20, 2012 19:47
-
LINKS on the different types of recoveries and disaster recovery
Hello
Can someone please give me the links on different types of recovery scenarios. And what is meant by disaster recovery and how to survive in the event of any disaster recovery and types of disaster recovery.
Please help me gurus.
Thank you and best regards,
Poorna Prasad.Useful link.
http://www.morganslibrary.com/reference/rman_demos.html
http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/recoscen.htm#BRADV229
I hope this helps.
Concerning
Asif Kabir
Maybe you are looking for
-
Is it possible to have an iPhone all nine 6s with spots on the screen changed?
Hello I bought an iPhone 6s a few days ago, of the Finland via a wireless carrier (Elisa). Right after I remove the screen protector, I realized there are a few spots on the screen that would return a moment after them wiping. Next day I took the pho
-
How to replace the cmos battery in a HP nc6220
I need to replace the cmos battery in a computer laptop nc6220. This is a simple job. Can someone explain how or provide a link explaining? Thank you to COMPUTIAC
-
CurveSnippet referenced on another REPORT sheet
Hi all Does anyone know how to refer to an extract from curve on another sheet in a DIAdem report? Basically I have a chart on a worksheet and the legend in a table on the next sheet. I need to show a clip of curve for each entry in the legend, but
-
Setting up with AT &; T
Hello. I live in England and I am trying to set up my girlfriend with internet access, who lives in the United States. She has AT & T with a DLink modem. We have both found support DLink as useless, and AT & T have not been helpful either, two of the
-
I am trying to copy a folder to another it doesn't
I'm trying to move the files to a memory stick to a folder and all I get is the blue circle of spinning forever. It happened just by the way a folder and it's very frustrating. I use to be able to drag and drop all the time, but lately, it does not w