ESXi and TPM (Trusted Platform Module)

Similar Questions

• How to activate the TPM (Trusted Platform Module) in the BIOS?

  Original title: activate the TPM in vista.

  Hello team MS,

  I use Win Vista Ultimate 32-bit operating system. I want to activate the TPM (Trusted Platform Module) for use bit locker drive E:\. How to enable the TPM in the BIOS. I use Intel 915 gigabytes - motherboard with 1.5 GB of RAM and a 512 MB graphics card. Please, I beg you. suggest me.

  Thank you

  Rahul

  Hello Rahul,

  What is the brand and model of your computer?

  I recommend you to consult the manual that came with your computer to activate the TPM (Trusted Platform Module) in the BIOS (Basic Input Output System) as the BIOS settings vary for each computer & it depends on the manufacturer of the computer. If you are not comfortable to run, you can contact the manufacturer of your computer for help.

  
  Note: change BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  
  Reference: Overview of BitLocker Drive Encryption

  Hope the helps of information.

• Trusted Platform Module (TPM)

  I've been hunting now for some documents Trusted Platform Module (TPM) and some info from deep dive on how it interacts with a host server. I noticed that there are very few messages on this subject and even fewer details on the audit of the State of the TPM secure via the host server or how to interface with TPM for "physical presence".

  I have a few new blades IBM HS22 which look like they have the TPM in them, but the BIOS interface is a little confusing. He says it's activate, but physical presence is "not claimed". I know it's something I have to look through IBM, but I expected to find more information on the subject in the VMware admin guides or deployment guides. Anyone know where I can find good documentation?

  Hello

  I think you have a problem with the BIOS of your system and the TPM device then you have really a hardware problem. BONE (ESX) is not actually involved at this time. TPM "stuff" happening before same ESX boots.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• HP compaq dc5800 SFF: Trusted Platform Module 1.2

  Hello I have a desktop HP Compaq dc5800 SFF pc. I need driver for Trusted Platform Module 1.2, my hardware is: ACPI\IFX0102 * IFX0102

  Go to Device Manager and click on the device TPM that need the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp40553.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  If it isn't, I suggest you to install the latest chipset driver Intel for your PC and if you have not been updated to W7 SP1, do, because as I said, there is no need to install this driver on Vista or W7.

  Here's the latest Intel chipset driver for pc... Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• Cannot install the Trusted Platform Module Driver / software

  I am not able to install the driver of the TPM secure and so I'm not able to install the TPM software... I have a satellite u200, and it's on my tools and utitilities cd. Installation always says "Trusted Platform Module not found" someone at - it the same problem?

  Hello

  Have you checked the BIOS settings? Maybe the TPM must be enabled first.

• Trusted platform module 1.2 driver problem.

  platform module 1.2 error code problem driver 10 this device cannot start of trust. I reinstalled and restored, always error.

  Hello tankerus,

  in most cases, this error code 10 means

  1. that you don't have the latest version of the driver, 2. the driver installed is not compatible with your version of windows or 3. only a windows update is missing.

  Then all first use the 'windows update' from 'Start-online ControlPanel => all programs"to check the latest updates of windows.

  If it's ok, use Device Manager to get some information about what the problem is:

  Click on "Start-online ControlPanel => DeviceManager" and find the smart TPM module in the list, right-click on it and click 'Properties' and look in 'common' for some messages.

  Also, you can use the device to check the updates, but in most cases that it will do anything, while you need to search the drivers more recent and accurate on the Internet site either the vendor of your PC (laptop), or the seller of the TPM chip which could be Atmel Infineon etc. I recommend trying the espacially first seller of Pc if it's portable!

  Be sure to download 1. the latest driver and 2. the appropriate driver for your version of windows and 3. for good (portable) PC model!

  Uninstall your TPM driver using the "Device Manager" before installing the new driver!

  Try this and see if it solves your problem.

  Best regards

  Dirk

• HP 455 G1: Trusted Platform Module TPM in HP 455 G1

  A laptop HP 455 G1 a TPM?

  Hello:

  According to the link quickspecs below, it doesn't have a TPM module.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx%2Fc03944068.PDF

  If you want a laptop with a TPM module, you need a minimum of the HP Probook 600 G1 series.

  If you want to AMD, and a 15.6 screen "then the HP 655 G1 would be the one you want.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04126034

• Stream HP 13 (13-c077nr): Trust Platform Module (TPM) on stream HP 13 (13-c077nr)

  Hello

  TPM is available on the HP 13-c077nr flow model?

  Thank you.

  Hello

  Not as shown:

  http://support.HP.com/au-en/document/c04484937

  Normally only company machines have TPM, not normal machines, even high-end Envy.

  Kind regards.

• Trusted Platform Module

  Toshiba also makes portable computers with a TPM Module (version 1.2 or later, for the use of BitLocker)? If so, which models?

  AFAIK THAT TPM 1.2 will be used on the latest Tecra A, S, M series, Satellite Pro S500 and new notebooks Portege R600 like laptop.

• Trusted Platform Module install

  I have a HP Pavilion Elite HPE - 580T which does not have a TPM Module (TPM).  Can someone tell me if I can buy a TPM module and install it on that PC?  Thank you.

  Hello

  Your machine using Intel CPU, try it please:

  http://www.missingremote.com/news/2013-11-24/adding-TPM-Intel-motherboards

  You can buy it from Amazon, similar to this:

  http://www.Amazon.com/ASUS-accessory-TPM-FW3-19-BitLocker/DP/B0085E4WQQ

  Kind regards.

• Cannot press Yes on my stream 7 at startup after change to rearm windows to Trusted Platform Module

  dialogue of blue screen that I can't go beyond that I said yes or no to identify or reject to clear the tpm. Not recognize his touch and even when I plug a keyboard via otg used not work either.

  You connect the adapter to the OTG and USB keyboard in front of you it turned on?  It is probably necessary to configure the port of loading to the mode of the host.  If it still doesn't work try holding both volume and volume buttons together at the same time and then feed up to reset the BIOS, (it takes three fingers).

• Compatible TPM cannot be found on this computer. Verify that this computer has a TPM 1.2 module and it is enabled in the BIOS.

  I just installed the version of Windows 7 Ultimate, because I need to configure BitLocker to file encryption.  I get this error when I try to turn it on.  How can I configure a secure platform module?

  http://www.SevenForums.com/tutorials/4681-BitLocker-Drive-Encryption-Windows-7-drive-turn-off-no-TPM.HTML releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Manually download the update for Windows Server 2008 and Windows Vista platform

  Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

  I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

  Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• Want to take the certification VCP6-VTC, but I finished the 5.5 ESXi and vCenter Server 5.5

  Hello

  2 years ago I had the training for 5.5 ESXi and vCenter Server 5.5 - I wonder if that would satisfy the requirement and allows me to pass the exam VCP6-VTC?  Or should I stick with the VTC VCDP5 only?

  Have you taken after school.

  5.5 vSphere install, configure and manage.

  If so, please attend vSphere: what's new [5.5 to 6.0]

  It is a 2 day course that will allow you to take the exam VCP6-VTC.

  Otherwise, take VCP550 review and upgrade to VCP6-VTC in taking 2V0 - 621D.

  Pleaes see following URLs too.

  http://myLearn.VMware.com/mgrReg/plan.cfm?plan=12457&UI=www_cert&TRK=profile_certification_title

  VCP6-VTC Certification