HP compaq dc5800 SFF: Trusted Platform Module 1.2

Hello I have a desktop HP Compaq dc5800 SFF pc. I need driver for Trusted Platform Module 1.2, my hardware is: ACPI\IFX0102 * IFX0102

Go to Device Manager and click on the device TPM that need the driver.

Click the driver tab.  Click on set to update driver.

Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

This file will be located in C:\SWSetup\sp40553.

Make sure that the include subfolders is selected and see if the pilot goes like this.

If it isn't, I suggest you to install the latest chipset driver Intel for your PC and if you have not been updated to W7 SP1, do, because as I said, there is no need to install this driver on Vista or W7.

Here's the latest Intel chipset driver for pc... Download, unzip and run the setup.exe file.

https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

Tags: HP Desktops

Similar Questions

  • Cannot install the Trusted Platform Module Driver / software

    I am not able to install the driver of the TPM secure and so I'm not able to install the TPM software... I have a satellite u200, and it's on my tools and utitilities cd. Installation always says "Trusted Platform Module not found" someone at - it the same problem?

    Hello

    Have you checked the BIOS settings? Maybe the TPM must be enabled first.

  • How to activate the TPM (Trusted Platform Module) in the BIOS?

    Original title: activate the TPM in vista.

    Hello team MS,

    I use Win Vista Ultimate 32-bit operating system. I want to activate the TPM (Trusted Platform Module) for use bit locker drive E:\. How to enable the TPM in the BIOS. I use Intel 915 gigabytes - motherboard with 1.5 GB of RAM and a 512 MB graphics card. Please, I beg you. suggest me.

    Thank you

    Rahul

    Hello Rahul,

    What is the brand and model of your computer?

    I recommend you to consult the manual that came with your computer to activate the TPM (Trusted Platform Module) in the BIOS (Basic Input Output System) as the BIOS settings vary for each computer & it depends on the manufacturer of the computer. If you are not comfortable to run, you can contact the manufacturer of your computer for help.


    Note:
    change BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.


    Reference:
    Overview of BitLocker Drive Encryption

    Hope the helps of information.

  • ESXi and TPM (Trusted Platform Module)

    Hi all

    I'm trying to use the TPM (Trusted Platform Module) on my Linux virtual machines (platform is VMware ESXi 4.0).  I activated the TPM in the BIOS and installed the tpm-tools package on my Fedora Core 14 VM.

    Uses a TPM feature secure in the virtual machines supported by VMware ESXi?  If so, are there special software or the steps I must take to use the TPM secure in my virtual machine?

    I was not able to find much information about it, so any ideas would be useful.

    Thank you

    Mike

    The TPM is not passed through to the guest.

  • Trusted Platform Module (TPM)

    I've been hunting now for some documents Trusted Platform Module (TPM) and some info from deep dive on how it interacts with a host server. I noticed that there are very few messages on this subject and even fewer details on the audit of the State of the TPM secure via the host server or how to interface with TPM for "physical presence".

    I have a few new blades IBM HS22 which look like they have the TPM in them, but the BIOS interface is a little confusing. He says it's activate, but physical presence is "not claimed". I know it's something I have to look through IBM, but I expected to find more information on the subject in the VMware admin guides or deployment guides. Anyone know where I can find good documentation?

    http://www.keithsopher.com/Images/VCP_logo_40.gif

    Hello

    I think you have a problem with the BIOS of your system and the TPM device then you have really a hardware problem. BONE (ESX) is not actually involved at this time. TPM "stuff" happening before same ESX boots.

    Best regards
    Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

    Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

    Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

    Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

    Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

  • Trusted platform module 1.2 driver problem.

    platform module 1.2 error code problem driver 10 this device cannot start of trust. I reinstalled and restored, always error.

    Hello tankerus,

    in most cases, this error code 10 means

    1. that you don't have the latest version of the driver, 2. the driver installed is not compatible with your version of windows or 3. only a windows update is missing.

    Then all first use the 'windows update' from 'Start-online ControlPanel => all programs"to check the latest updates of windows.

    If it's ok, use Device Manager to get some information about what the problem is:

    Click on "Start-online ControlPanel => DeviceManager" and find the smart TPM module in the list, right-click on it and click 'Properties' and look in 'common' for some messages.

    Also, you can use the device to check the updates, but in most cases that it will do anything, while you need to search the drivers more recent and accurate on the Internet site either the vendor of your PC (laptop), or the seller of the TPM chip which could be Atmel Infineon etc. I recommend trying the espacially first seller of Pc if it's portable!

    Be sure to download 1. the latest driver and 2. the appropriate driver for your version of windows and 3. for good (portable) PC model!

    Uninstall your TPM driver using the "Device Manager" before installing the new driver!

    Try this and see if it solves your problem.

    Best regards

    Dirk

  • HP Compaq dc5800 SFF: HP compaq dc5800 format factor windows 7 audio driver

    I received the message in error message "no output device is installed" on the sound icon in the task bar bar.  I don't understand why the driver of HP web page

    https://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=3658095 & swLangOid = 8 & swEnvOid = 4052

    does not have the audio driver for the small frame factor dc5800 HP Compac PC company.  I'm of the view that other owners have had the problem of not being able to find a sound driver for this as well.

    The driver can be found here:

    (HD)-Audio-Driver-v.6.10.7255-Re.-A-for-Windows-7-(32-64-bit)-free https://us.driverscollection.com/_47316373665403689ce86efb0a3/download-HP-Compaq-dc5800-ADI-high-definition-

    I've successfully installed on my PC.

  • HP compaq dc5800 sff: install a new graphics card

    Hello

    I bought a 240 r7 radeon graphics card to upgrade my hp dc5800 sff, it is running on the q33 chipset from intel.

    How to install this new graphics card? I want to talk about the installation of the drivers, not the placement in the pc itself.

    I read somewhere that I first need to uninstall the drivers from the chipset, q33 before putting the card in my pc, is it true? If Yes, how should I do it OK?

    If not, can I just put it in the case, plug in my monitor inside and start the pc, then install the drivers from the disk?

    Thank you

    Hello

    It is very rare that the removal of the existing video driver is necessary before installing a new video card. Most video card manufacturers do not understand such a suggestion with instructions to install a new video card.

    However, if you still believe that you must work Yes, so that you can go through the program and features Control Panel to remove the video driver only. You can also use Driversweeper to clean up the video driver.  However, before removing the Chuck, make sure you have the original drivers downloaded to your desktop so that you don't have to hunt for him later if necessary.

    The AMD R7 240 does not yet in your PC according to the level of brand, model and vBIOS in the graphics card.  In addition, check power supply required for the 240 R7 which, from what I've read is 400 watts.

  • Trusted Platform Module

    Toshiba also makes portable computers with a TPM Module (version 1.2 or later, for the use of BitLocker)? If so, which models?

    AFAIK THAT TPM 1.2 will be used on the latest Tecra A, S, M series, Satellite Pro S500 and new notebooks Portege R600 like laptop.

  • Compaq DC5800 sff: compaq dc5800 small form factor 4 monitors

    My machine is a Compaq dc 5800 small form factor. Running windows 7.

    Wondered what would be the best way to get four monitors to work on this machine. Different programs of 4 separate monitors 4 on each of them, what graphics card should I buyto achieve?

    I have a usb to vga thing that might work for a monitor, so this means that I need a chart of small form factor card that can work 2 or do I need one that will run 3. I read that once you install a graphics card, you can't activate the onboard graphics in the bios. I don't want to have this problem. Please help me.

    Thank you

    Here is the Manual:

    Manual

    You'll need a card video low - profile pci-e x 16. Even if you buy one with 3 outputs as a vga, one dvi and one HDMI usually you can only use 2.

    http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=7717576 & SRCCODE = WEBGOOPA & scid = scplp698686 & kpid = 7717576 & gclid = Cj0KEQiAiamlBRCgj83PiYm6 - gBEiQArnojDzV29tsehaj_KoZBvaF_tPNYEd-lz4cTMeNrlTNijXoaAjPg8P8HAQ & gclsrc = aw.ds

    And Yes, when you install an add-in pci-e video card, you will lose the integrated graphics card.

    In order to drive the moire than 2 monitors you need a second video card, or a multiple display adapter cable. You have a pci-e available x 1 slot and there is such a thing as a video card pci-e x 1 like this:

    http://www.Matrox.com/graphics/en/products/graphics_cards/m_series/m9120pluslpx1/

    http://www.Newegg.com/product/product.aspx?item=9SIA4UB1J73800

    Some of these x 1 cards actually have a quad cable optionally, you can add the display.

    These are not for gaming but can run extra for things monitors as having walked fellow RSS site or desktop computers more available to work.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • HP 455 G1: Trusted Platform Module TPM in HP 455 G1

    A laptop HP 455 G1 a TPM?

    Hello:

    According to the link quickspecs below, it doesn't have a TPM module.

    http://WWW8.HP.com/h20195/v2/GetPDF.aspx%2Fc03944068.PDF

    If you want a laptop with a TPM module, you need a minimum of the HP Probook 600 G1 series.

    If you want to AMD, and a 15.6 screen "then the HP 655 G1 would be the one you want.

    http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04126034

  • Trusted Platform Module install

    I have a HP Pavilion Elite HPE - 580T which does not have a TPM Module (TPM).  Can someone tell me if I can buy a TPM module and install it on that PC?  Thank you.

    Hello

    Your machine using Intel CPU, try it please:

    http://www.missingremote.com/news/2013-11-24/adding-TPM-Intel-motherboards

    You can buy it from Amazon, similar to this:

    http://www.Amazon.com/ASUS-accessory-TPM-FW3-19-BitLocker/DP/B0085E4WQQ

    Kind regards.

  • Cannot press Yes on my stream 7 at startup after change to rearm windows to Trusted Platform Module

    dialogue of blue screen that I can't go beyond that I said yes or no to identify or reject to clear the tpm. Not recognize his touch and even when I plug a keyboard via otg used not work either.

    You connect the adapter to the OTG and USB keyboard in front of you it turned on?  It is probably necessary to configure the port of loading to the mode of the host.  If it still doesn't work try holding both volume and volume buttons together at the same time and then feed up to reset the BIOS, (it takes three fingers).

  • PCI Simple Communications Controller driver for HP-Compaq dc5800 SFF

    In the device, other devices shows yellow exclamation with PCI Simple Communications Controller Manager.

    I found a few references to care packs, but none that really meet this model and the OS which is Windows 7 Enterprise 32-bit Edition.

    If you select the download button, it seems that here, the connection cannot connect to the FTP as happens with errors of popup like 425 can't open data connection.

    So two things has driver and is there a http download?

    Thank you

    Paul_Tikkanen wrote:

    Hello:

    You need to install the HECI of 32-bit driver that is not listed in the W7 to your PC download page.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3658082&prodNameId=3658094&swEnvOID=2096&swLang=13&mode=2&taskId=135&swItem=vc-78668-1

    Thanks that solved the problem of missing driver.

    Had to download off site due to firewall blocks FTP. But as an alternative would download flow anyway.

  • Stream HP 13 (13-c077nr): Trust Platform Module (TPM) on stream HP 13 (13-c077nr)

    Hello

    TPM is available on the HP 13-c077nr flow model?

    Thank you.

    Hello

    Not as shown:

    http://support.HP.com/au-en/document/c04484937

    Normally only company machines have TPM, not normal machines, even high-end Envy.

    Kind regards.

Maybe you are looking for

  • How to get rid of mackeeper

    How can I get rid of mackeeper?

  • No requireed receiver remote control in Vista - Qosmio G30

    The G30 Vista versions do not need of the separate remote receiver, using the built-in IR receiver on the front panel. Update an Qosmio XP MCE to Vista simlilarly would not require the remote receiver separated, and it should be the Vista version of

  • Installer password

    Installer wants my password and I don't know what it is. Im stuck and cannot install new software updates. Can someone help me?

  • updating iPhone software 4

    My iPhone 4 is running IOS 7.1.2 when I update software it says your software is up-to-date. I'm not able to get a new version of the IOS, so the few apps that I have download iTunes do not load or updates of gat app on my iPhone that I can. How can

  • Z510 - error-GT740M icon

    Hello I installed Windows 10 (new installation CD), and I have the error on this graphics icon. I had the same problem on windows 8.1 before installing 10. I tried to uninstal energy managenemt (I read it on another topic) but his does not work... Tr