Trusted platform module 1.2 driver problem.

Similar Questions

• Cannot install the Trusted Platform Module Driver / software

  I am not able to install the driver of the TPM secure and so I'm not able to install the TPM software... I have a satellite u200, and it's on my tools and utitilities cd. Installation always says "Trusted Platform Module not found" someone at - it the same problem?

  Hello

  Have you checked the BIOS settings? Maybe the TPM must be enabled first.

• How to activate the TPM (Trusted Platform Module) in the BIOS?

  Original title: activate the TPM in vista.

  Hello team MS,

  I use Win Vista Ultimate 32-bit operating system. I want to activate the TPM (Trusted Platform Module) for use bit locker drive E:\. How to enable the TPM in the BIOS. I use Intel 915 gigabytes - motherboard with 1.5 GB of RAM and a 512 MB graphics card. Please, I beg you. suggest me.

  Thank you

  Rahul

  Hello Rahul,

  What is the brand and model of your computer?

  I recommend you to consult the manual that came with your computer to activate the TPM (Trusted Platform Module) in the BIOS (Basic Input Output System) as the BIOS settings vary for each computer & it depends on the manufacturer of the computer. If you are not comfortable to run, you can contact the manufacturer of your computer for help.

  
  Note: change BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  
  Reference: Overview of BitLocker Drive Encryption

  Hope the helps of information.

• HP compaq dc5800 SFF: Trusted Platform Module 1.2

  Hello I have a desktop HP Compaq dc5800 SFF pc. I need driver for Trusted Platform Module 1.2, my hardware is: ACPI\IFX0102 * IFX0102

  Go to Device Manager and click on the device TPM that need the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp40553.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  If it isn't, I suggest you to install the latest chipset driver Intel for your PC and if you have not been updated to W7 SP1, do, because as I said, there is no need to install this driver on Vista or W7.

  Here's the latest Intel chipset driver for pc... Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• Trusted Platform Module (TPM)

  I've been hunting now for some documents Trusted Platform Module (TPM) and some info from deep dive on how it interacts with a host server. I noticed that there are very few messages on this subject and even fewer details on the audit of the State of the TPM secure via the host server or how to interface with TPM for "physical presence".

  I have a few new blades IBM HS22 which look like they have the TPM in them, but the BIOS interface is a little confusing. He says it's activate, but physical presence is "not claimed". I know it's something I have to look through IBM, but I expected to find more information on the subject in the VMware admin guides or deployment guides. Anyone know where I can find good documentation?

  Hello

  I think you have a problem with the BIOS of your system and the TPM device then you have really a hardware problem. BONE (ESX) is not actually involved at this time. TPM "stuff" happening before same ESX boots.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• ESXi and TPM (Trusted Platform Module)

  Hi all

  I'm trying to use the TPM (Trusted Platform Module) on my Linux virtual machines (platform is VMware ESXi 4.0).  I activated the TPM in the BIOS and installed the tpm-tools package on my Fedora Core 14 VM.

  Uses a TPM feature secure in the virtual machines supported by VMware ESXi?  If so, are there special software or the steps I must take to use the TPM secure in my virtual machine?

  I was not able to find much information about it, so any ideas would be useful.

  Thank you

  Mike

  The TPM is not passed through to the guest.

• Trusted Platform Module

  Toshiba also makes portable computers with a TPM Module (version 1.2 or later, for the use of BitLocker)? If so, which models?

  AFAIK THAT TPM 1.2 will be used on the latest Tecra A, S, M series, Satellite Pro S500 and new notebooks Portege R600 like laptop.

• HP 455 G1: Trusted Platform Module TPM in HP 455 G1

  A laptop HP 455 G1 a TPM?

  Hello:

  According to the link quickspecs below, it doesn't have a TPM module.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx%2Fc03944068.PDF

  If you want a laptop with a TPM module, you need a minimum of the HP Probook 600 G1 series.

  If you want to AMD, and a 15.6 screen "then the HP 655 G1 would be the one you want.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04126034

• Trusted Platform Module install

  I have a HP Pavilion Elite HPE - 580T which does not have a TPM Module (TPM).  Can someone tell me if I can buy a TPM module and install it on that PC?  Thank you.

  Hello

  Your machine using Intel CPU, try it please:

  http://www.missingremote.com/news/2013-11-24/adding-TPM-Intel-motherboards

  You can buy it from Amazon, similar to this:

  http://www.Amazon.com/ASUS-accessory-TPM-FW3-19-BitLocker/DP/B0085E4WQQ

  Kind regards.

• Cannot press Yes on my stream 7 at startup after change to rearm windows to Trusted Platform Module

  dialogue of blue screen that I can't go beyond that I said yes or no to identify or reject to clear the tpm. Not recognize his touch and even when I plug a keyboard via otg used not work either.

  You connect the adapter to the OTG and USB keyboard in front of you it turned on?  It is probably necessary to configure the port of loading to the mode of the host.  If it still doesn't work try holding both volume and volume buttons together at the same time and then feed up to reset the BIOS, (it takes three fingers).

• Stream HP 13 (13-c077nr): Trust Platform Module (TPM) on stream HP 13 (13-c077nr)

  Hello

  TPM is available on the HP 13-c077nr flow model?

  Thank you.

  Hello

  Not as shown:

  http://support.HP.com/au-en/document/c04484937

  Normally only company machines have TPM, not normal machines, even high-end Envy.

  Kind regards.

• Dedicated graphics (A1398) driver problem

  My Macbook Pro (A1398) dedicated card (Geforce GT650M) graphics driver problem.

  Installation of the drivers of web from Nvidia (WebDriver - 346.03.10f02.dmg, WebDriver - 346.03.10f01.dmg, WebDriver - 346.03.10 b 01 .dmg) with CUDA drivers (cudadriver - 7.5.29 - macos.dmg) and toolboxes CUDA (cuda_8.0.29_mac.dmg and cuda_7.5.27_mac.dmg) does NOT.

  When I tried to install Caffè/CUDA (used for Machine learning), my card (Geforce GT650M) dedicated graphics card driver has become corrupt (seen through the Console).

  Dedicated card random is more gets reported under 'report system' (probably due to the problem of driver).

  Attempts to restore have been hit and Miss so far.

  I downloaded the drivers from Nvidia web (WebDriver - 346.03.10f02.dmg, WebDriver - 346.03.10f01.dmg, WebDriver - 346.03.10 b 01 .dmg) but they have only worked / failed randomly when combined with CUDA drivers (cudadriver - 7.5.29 - macos.dmg) and toolboxes CUDA (cuda_8.0.29_mac.dmg and cuda_7.5.27_mac.dmg).

  Only the internal graphics card Intel Graphics 4000 is constantly working.

  I cleaned the system (by removing all traces of the nvidia drivers and drivers of coda) while that to reinstall these drivers in different combinations.

  Yet, the conclusion is that it is all the success and the miss.

  Sometimes it worked I could test samples CUDA.

  Other times, that it worked, but the laptop would freeze randomly.

  Then, he failed once again and returned to map internal Intel completely.

  It was suggested that I should be able to restore it by reinstalling ElCapitan

  I don't have the luxury of reinstall ElCapitan.

  Is there a way to access the Apple drivers without having to reinstall OS x.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  This could be your problem:

  http://www.Apple.com/support/MacBookPro-videoissues/

  Need to reinstall OSX to reinstall the Apple drivers.

• Driver problem

  I think I have a driver problem. Installed the 9.3.1 version recently.  Always get an error message and cannot connect to Safari.

  What is the exact error message?  You can try another web browser: chrome, firefox, etc.

  E-mail work?

  R

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Sound driver problems

  Hello world

  I reinstalled windows in my computer after you have removed all the files it contains.

  Therefore, I unfortunately lost the recovery partition.

  Now, after you have reinstalled the Windows 8 Pro, I installed all the drivers and everything works normally except the sound.

  However, I have been using Ubuntu after reinstaled Windows and I DIND'T have no problem with that.

  I thought that maybe this could be a problem inside, but when I use me headphones, or when I use my computer with my TV with HDMI, the problem persists.

  My computer is a HP ENVY m6-k010dx Sleekbook.

  So, what shoul I do to have it fixed?

  (Sorry for my bad English )

  ---------------- UPDATE ----------------

  I use a Linux Live USB to test the sound, as it could be any physical problem.

  However, it turned out that it really is a driver problem.

  I found a solution

  Just after installing Windows 8.1 the problem fixed itself

  Thanks for your help ():