Multimedia playback on another platform

Similar Questions

• Satellite L750 - suttering her vibrator trolling during multimedia playback

  OK, I bought this refurbished Satellite L750/L755 and Ive had for almost 2 months now.

  Ive been implemented with this problem so far because everything I tried initially had no effect.
  So now im coming straight on the toshiba forums in the hope of a solution.

  OK so as the subject line says there is a problem during multimedia playback. Any media. YouTube streaming, DVDs, games etc. It is difficult to describe what is happening over a stuttering / hum, which seems trolling for about a second and then again be well.

  However this can happen anywhere up to 10 times in a single song on YouTube. But it is not localized to the sound. As the sound lags, made the video, but not to the same extent.

  The video is usually stops and then cut off after. The sound seems just stuck to the second, the last buzz he played.

  Another thing I noticed was that the buzzing, accompanied each time a huge spike in my CPU usage. sometimes at 100%. but the task mannager shows nothing by using the CPU at these moments there.

  So now to the solution and what I tried

  While I was shopping I noticed that - Dell - owners seemed to have a similar problem which was caused by a pilot defective in fast Intel storage system files, but I have installed that it couldn't have been.

  I noticed that Toshiba had released new drivers for a problem similar to that caused by the Atheros WLAN card, which has my laptop. I did download and try this driver, but that the problem online but also offline, I thought this might be a longshot. of course, I was right.

  If anyone can help I would really appritiate it.

  Thank you very much.

  Hello

  > Another thing I noticed was that the buzzing, accompanied each time a huge spike in my CPU usage. sometimes at 100%. but the task mannager shows nothing by using the CPU at these moments there.

  I think that's the key, it looks that this buzz seems due stressed CPU.
  I found an interesting thread on the similar theme to shift media
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67087

  Using LatencyMon and DPC latency Checker, you can check which driver / service cause this.

• Move the VMs of VSphere platform to another platform VSphere

  Morning all,

  I have to move virtual machines to VSphere platform to another new platform that has just been built.

  The two platforms of VSphere are the same (VSpher 4), but one runs by default VSwitch and the new has the software Nexus 1000v switch installed in the new environment. The old platform runs some VMs productions and I was wondering if the ESX host could be disconnected from the bunch on the old platform and moved and connected to the cluster in the new environment, even if each of the platforms have different network configurations. The new environment would be able to see former ESX host and the virtual machines that is held on this subject?

  I thought using models of the FVO to migrate virtual machines, but this could be quite tedious.

  Any suggestion would be appreciated

  Concerning

  Mark

  Welcome to the Forums - I assume when you say former vSphere environment to the new your allusion to the virtual Center?

  If you are that Yes you can remove your old environment of vCenter ESX hosts and add it to the new vCenter trouble-free environment. This can also be done if the old environment is ESX 35/Virtual Center 2.5 with number

  I also changed the thread a more appropriate Forum - ESX 4

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Transfer to another platform series

  Hello

  I got the suite CS 3 Design on my Mac, the Mac life is over and I am without replacing it with a Mac. Would it not be transferred to be used instead on my PC?

  Unfortunately, the swap of the platform is only for the current version.

  Concerning

  Stéphane

• Access to multimedia files from another server problem

  Currently I am working in a project with streaming video on-demand and using FMS 4.5 .

  
  

  " Say the FMS is installed on a machine say ' 121.123.35.34 ' and there is another server"100.54.88.222". where all media files belong Now we need point to this third-party server to play videos of FMS. I did the changes below:

  In the fms.ini file: set VOD_DIR2 = \\100.54.88.222\myvideos

  In the application.xml: added stream: streams >/HR; ${VOD_DIR2} < / flow >

  My request for access to the path of the flv as: source = "rtmp: / / 121.123.35.34:1935/vod/hr/test. Not able to access the video.

  
  

  Note: If I say "C:hrvideos" in VOD_DIR2, then I'm able to access videos using the same URL.

  
  

  I also tried mapping the path shared the machine to the FMS and then saw the drive mapped path in the VOD_DIR2, but it does not work.

  Please let me know:
  

  1. If we set up any other parameter videos from another server.
  2. VOD_COMMON_DIR: I modified this similar to VOD_DIR in the directory "C:hrvideos", I am able to stream videos with http, rtmp, but not the jet of abl eto.

  Please let me know we can disseminate via http too as we need to run the f4m manifest file.

  http://121.123.35.34:8134/vod/hr/sample.mp4.

  http://121.123.35.34:8134/vod/hr/sample. F4M
  

  
  

  Thank you

  Anjali

  Hello

  For RTMP: Try mapping to another server.

  For HTTP: Yesy you can change the DocumentRoot directive, but then it will search for content in this folder for all types of applications and not just HDS VOD.

  To configure only HDS - VOD, positioned on the HttpStreamingContentPath:

  Change this HttpStreamingContentPath '... / webroot/vod " to HttpStreamingContentPath" C:/hrvideos "

  Note that the location is now absolute and oblique. Likewise, you can put in a network address.

  Thank you

• Opens a project PrPro CS5 or AE in another platform

  Probably been covered, but could not find in the search of the forums.  Can I open a mac based project PrPro Cs5 in Windows and vice versa?  Same question for AE.  Photoshop does this, so I think that the Pr would be too.

  Should be little problems go X-platform for PrPro. Note: there are some effects and Transitions in the PC version, which do not exist in the Mac version, but usually PrPro is good with the lack of effects and Transitions (3rd part), with informative dialogue screens help you to locate the missing items. At least that was how it was in earlier versions and I hope that CS5 has not cut out.

  With respect to EI, I can't help migration of platform-X.

  Good luck

  Hunt

• Can clone us apps to another platform

  Hi all
  We have running on HP UX Itanium Production 12.0.4.
  We also have a new Linux (Enterprise Linux 4) whereby I wanted to clone the existing Prod on HP UX. I think that it is not possible to clone to a different platform by using the normal procedure of quick clone.
  Would it be possible as a result of any other custom procedure, suggestions, clues, documentation is reference please...
  
  Kind regards
  Bharat.

  Hello

  We have running on HP UX Itanium Production 12.0.4.
  We also have a new Linux (Enterprise Linux 4) whereby I wanted to clone the existing Prod on HP UX. I think that it is not possible to clone to a different platform by using the normal procedure of quick clone.

  You are right as the source and the target operating systems must be compatible to the binary format.

  Would it be possible as a result of any other custom procedure, suggestions, clues, documentation is reference please...

  Follow the steps of (Note: 756086.1 - Oracle Applications R12 Migration from Solaris to Linux platform).

  For the database, you need to export/import.

  Note: 454616.1 - export/import process for Oracle E-Business Suite Release 12 using 10 gr 2
  Note: 741818.1 - process of import/Export for R12 using 11 GR 1 material

  Kind regards
  Hussein

• How can I download the firmware for another platform

  Hello. I am trying to download the update of firmware for WRT160N (HW ver3) for a router connected to a XP machine.

  I download a bin file from a Mac and the download page for show me, but I think that's a Mac - I need the (32-bit) version of Windows XP (exe file)?

  Anyone know the direct link to download XP?

  p.s. I can't connect the XP machine to the Internet, it should be uploaded on the Mac.

  Firmware is not executable.  You downloaded the bin file, which is the firmware file.  Access to your administration pages of routers and fine to the firmware upgrade section and follow the instructions, and that it points to the bin file.

• Win 7 Center multimedia playback of ripped DVD to my HARD drive.

  I am trying to play movies from my library that I ripped to my HARD drive so the discs don't be destroyed, I can find changes in registry for Vista, but nothing for Win 7 at this point. I downloaded my movies to try it but nothing helps, I can burn movies on HARD drive but viewing leaves much to be desired. Appears as a broken screen, very pixelated, which cannot be seen, the music is heard, but not able to view the image.
  This is a new installation X 64, 4 GB of Ram with a processor AMD Athlon 2 + and a GT220 1 GB DDR3 video card, he read a Blue Ray movie without any problem from the drive and plays all DVD disc ok, but won't from the HARD disk. The Media Center also will see the DVD on the HARD drive in the movie library.
  Have Cyberlink BD Edition to play movies on disc.
  Anyone has any ideas please?
  You want to run Win Home Server but get this straight first.
  Thank you.

  Hi PET-240,

  Thank you for visiting Microsoft Answers.

  What is the format of the files you are trying to play?

  This problem may occur if the video adapter driver is not updated. I suggest you update the driver card BIOS, Chipset and graphics of the website of the manufacturer.

  Also download and install a pack of codecs on your computer. Use your favorite search engine to search for an updated codec pack.

  The DVD library is not automatically enabled. If it is not enabled, you do not see your DVD content stored in your hard drive.

  The below mentioned link and follow the steps to enable the DVD library:

  http://support.Microsoft.com/kb/930526

  This link is for Windows Vista, but it also applies to Windows 7.

  I hope this helps.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Best practices of "rendition". What is the best in the design folio to another platform of translation?

  I have created my app for iPhone5 and now want to create renditions for iPhone3/4, iPad, Android. Should I take the original article and use the page tool to create a new page format, or is there a better approach? Bob Levine?

  No worries, it worked. Save as the INDD document in the same folder with a different name, use tool Page to create a new dimension, create a new folio of the same name in the Folio Builder but of different dimensions and Add. Thanks anyway.

• Which I inform / contact on my intentions to migrate my hosting of catalyst for the company to an another hosting platform?

  I intend to transfer my hosting to another platform, which asks if I informed my current host (BC) of my intentions. I don't know who I should talk to about it.

  Hi Ryan,

  You don't need to talk to someone. You export/understand what you want from British Colombia and close the account.

• Windows Vista platform

  My computer has a Windows Vista platform, I knew through Google Chrome is not be supported by windows, my question is, do I have to buy a new tower for my desktop with another platform or do I have to download a new version of Microsoft use internet to solve my problem.

  If the answer is that I have to buy a new one, what new Windows platform is recommend for home use.

  I'm not a person who knows too much about computers, so I'd really appreciate it if someone can give me a simple answer to my question.

  Hello

  I read it:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Google-chrome-and-Vista/a13270c3-9fbb-4860-bed5-7d5f18b85bdf

  Google has stopped supporting Chrome on XP and Vista.

  This is a Google's decision, not a decision by Microsoft.

  Most of the people just change using the Firefox browser.

  Vista, as long that you have installed Service Pack 2, has extended the support of Microsoft until April 2017.

  https://support.Microsoft.com/en-AU/help/13853/Windows-lifecycle-fact-sheet

  See you soon.

• Stutters audio during media playback all the

  Hello world

  This problem seems to have been haunts many people - I read this days, but everything I've found are unresolved threads.
  During multimedia playback - who is watch videos stored on my hard disk, streaming from youtube, listen to music on my hard drive and streaming music on the net - my sound triggers or stutters for a fraction of a second. A bit like a record jump. It happens every 20 seconds or more. It is therefore impossible to enjoy movies and music, but my main concern is recording.
  I've updated my edge from the website sound card driver Dell as well as card external sound (Line 6 KB37) that I use for recording. Stuttering product regardless of the sound card I have cross so I doubt that it is a driver problem, although I'm not gifted in computer science so I could be wrong. I tried to disable all the sound improvements but that becomes me anywhere I spent the last two days that I wanted to use record new songs to scouring the web for answers and I found nothing that works.
  I use a Dell Inspiron 1545 age of 2 years with 64-bit Windows 7 Home Premium. 4 GB of ram and a Pentium Dual - Core CPU. T4300 2.10 GHz, 2.10 GHz.
  Any ideas what I can do? This has worked well in the past and only recently begun trolling. What other information can I provide to facilitate this? Virus tests reveal nothing, not even in safe mode. I just defragmented it, ran CCleaner and Temp File Cleaner and I'm completely stumped.
  Thanks in advance for your help, I'll watch this space and pass on any info you may need on my system.
  See you soon,.
  Justin

  Justin,

  We discussed the same here: http://en.community.dell.com/support-forums/laptop/f/3517/t/19412524.aspx?PageIndex=3 and we found the solution to the problem, it seems that MS Update wants to install an "optional update' - storage - Intel Intel(r) ICH9M-E/M SATA AHCI Controller (until June 2011). But Intel has a more recent version updated to: Intel® Rapid Storage Technology, here:http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2101&DwnldID=20215&lang=eng&iid=dc_rss and after having removed the Updated MS a and replaced by Intel (Second link here). The problem has been resolved and no more stuttering, hum at all. I did a wipe full hard drive, Format and Fresh install of Win7 Home Premium x 64, and it fixed my problem too. I ignore MS Update for it and installed the Intel One rather after reformat and fresh install, just to make sure that it doesn't happen. So two options to see if you get as your fixed. Good luck to all.

  Thank you

  Mick Barker SR.

  A + technician

• Documaker for DAP platform

  Hi all

  Client recently reviewed upgrade to another platform. We would like to know if Documaker can be delivered as a '. '. WAR file"for the said platform.

  Thank you.

  Documaker is not a J2EE application and can be delivered as a WAR.

  Includes Documaker J2EE applications that are deployed as EAR files in Oracle Weblogic or Websphere from IBM. Old version of the Documaker also included the EAR file for deployment to other servers J2EE, such as Tomcat.

• More embedded platforms

  I finished the MOOC and enjoyed learning Java ME 8.  I also enjoyed using my raspberry pi for this because I have several and use them for various things.  I understand that it is convenient to use the IP - R for this course.

  But moving him run, I am interested in what other embedded platforms I can use it with.  The Pi is easily able to run other than full Java SE.  Older versions of Java ME supported things like ARM Cortex M3 and MIPS.  There will be something as it took in charge to Java ME 8?

  Also, perhaps, it is a strange question but is there a way to port manually a java me JVM 8 to another platform by myself?

  Hello!

  Yes, the RPi is not quite right target for Java ME. It is supported for the most part because of its popularity. At the same time, it is expected to support Cortex-M3/4 devices. I can't make commitments, but it's be worked actively on. So stay tuned. MIPS architecture only is currently not supported by virtual machine (the dynamic compiler and byte-code interpreter) is not as simple as that.

  Once upon a time Java me was available in open source (project phoneme). But that time has passed and now it is only possible to transfer yourself if you become licensed and that not free

  Kind regards

  Andrey