ESXi on NX1950

Similar Questions

• STOR. ESXi and E BASICS

  I have this problem:
  We use servers that are virtualized with ESXi Hypervisor.
  And the Windows operating system uses the STOR. E BASICS 500 GB to backup their data.

  Now a hard drive of this type felt, the hard drive is about 1 year ago.
  So I want to swap the drive with one of the same only more recent type, but now ESXi does not realize it.

  In a Windows operating system, the drive works fine, but ESXi, I have a chance!
  Y at - it a new firmware or something differnet changed?

  Experiences?

  The STOR. E BASICS 500 GB 2.5 "is the USB3.0 external HARD disk.
  It s a device plug n - and - play, requiring no additional drivers.

  Toshiba says that this HARD drive works properly under Microsoft Windows XP/Vista / Windows® 7 8/Windows/Windows 8.1

  The HARD disk supports the USB3.0 standard, and this means that you must 900mA can get it recognised correctly.
  In the case where the drive HARD isn't recognized on USB 2.0, I recommend you to use a USB cable to Y which allows to connect the HARD drive to two USB 2.0 ports

• Mac OS x won't start on mac pro esxi host

  We have the latest mac pro machine functioning as a construction of host 5.5.0 esxi 2718055.  We have setup the virtual Mac machine of the as a waiter in a magic triangle to our Mac OSX windows domain configuration.  Everything was up and running for some time now not really used because we delayed the purchase of our projected deployment Mac until this year.  I logged on today, and he says he has several updates and necessary to restart, so we issued the command reboot. Now the machine won't start upward.  It starts the boot process you see the Apple logo and progress bar starts moving on a 1/4 of the way and then it just turned off. I tried several of the commands below in the link, but nothing works, it just turns off. I tried to use my mac with vm ware fusion and the connection to the host and always change. I have triple checked that I am in the comments window active when you press these commands, but the problem is it only stays on during approximately 5 seconds then stops. I have removed from the inventory of esxi and re added, as well as restarted the ESXi host as well.  The virtual machine is sitting on the local storage of the esxi server.

  https://support.Apple.com/en-AU/HT201255

  Has anyone else had a problem similar to this?  I'm getting to this section and the progress bar starts to go, but then stops and turns off virtual machine.  How can I enter in address this further.

  

  Okay, so I went through the list and now I got using the command option r. tried before but maybe I press the keys long enough.  I was using my mac book pro and pro fusion to do all this. Couldn't make it work when you use the client heavy vsphere on my windows machine. Repair disk permissions is grayed out. I ran check disk permissions and got a ton of errors, ran check disk and he stopped saying repair the disk. Ran repair disk and he stopped to say that he cannot repair the disk, backup as many files as possible, reformat the drive and restore your backup files.

  Is there another way to try to fix this sucker, or is he at this point a POS and build a new one?

  

  

• PowerEdge Raid700 in RD540 with ESXi Thinkserver

  Hello

  I'll put up a hypverisor 5.5 ESXi update 2 on a lenovo RD540. There is a RAID700 controller.

  I use 3 HARD drive in a RAID6 configured with the tool of the bios (Mega RAID LSI)

  The server works fine, but I don't see the healthy of the RAID on the ESXi.

  I don't see the virtual disk, not the adapter of storage or physical disks. If one lose a disc ESXi does not know, I hear only the PIF from the server.

  How can I solve this problem?

  If I use the "Lenovo easy start' to install ESXi RAID adapter will be with ESXi?

  Thank you in advance.

  Concerning

  Arnaud

  Right now, I'm on the WebBios and I can't find where I can configure it

• W530 Bare Metal with ESXi 5.1 - Possible!

  Guyz!

  This will be good news for all those who want to wear metal ESXi W530 5.1.

  With simple clicks of customization, the whole installation runs smooth and Nice.

  For those who are interested. Answer in the thread and a lot of fun to share with you the way to do it.

  (I can't just download the image, it will be great if I can put it in a place).

  You get a few things to do.

  1. the ISO original Esxi 5.1. Download after free registration of VMware.

  2. a customizer of ESXi (http://www.v-front.de/p/esxi-customizer.html#download), this helps you to install a VIB in the ISO in order to go through the installation

  3. download the map here VIB (http://shell.peach.ne.jp/~aoyama/wordpress/download/net-e1000e-2.1.4.x86_64.vib).

  4. just the disk with the ISO to boot you careated. Everything works fine

• Desktop HP Envy 750qe: cannot install ESXI 6.0 on this server

  The specifications of the HP Envy 750qe desktop say nothing about the LAN card.  The motherboard is MS - 7826 Ver 2.0.
  There is a metal box closed covering the LAN and 2 accessories usb soldered to the motherboard.  Windows 10 indicates that the LAN controller is Realtek PCIe GBE Family Controller.  I would like to know the chipset used for this LAN Controller without destroying the material.  I can't find a direct reference anywhere - Realtek, HP or otherwise.

  Thank you

  Joe

  Realtek 8168 - built a custom iso using this link. LAN problem is resolved.

  http://www.v-front.de/2015/04/ESXi-60-hits-VMware-online-Depot-what.html

  installed the customizer on windows 7 and run the power shell script.

  .\ESXi-customizer-PS-v2.4.ps1 - vft - load net51-drivers

• Why my Win Serv 2012 std (hp ROK) do not settle on my 5.5.0 esxi?

  Hi people,

  I am a beginner, so be patient with me please.

  My company bought a proliant DL385p Gen 8 and it came to pass with support of dvd windows server 2012.

  The media label says:

  "Windows Server 2012 Recovery Media for Windows Server 2012 ROK products for HP Proliant Servers"

  I'm trying so install windows 2012 with this media in my Esxi 5.5.0, but the installation starts I get a message saying tha windows must only be installed in the hp machines.

  My doubt is that I am under esxi custom hp: VMware-ESXi-5.5.0-1746974-HP-5.72A.3-Jun2014.iso

  Why my windows does not recognize that I have do its installation on an hp machine?

  How could I solve this problem? Could I download another image of windows and activate it with my key product?

  Best regards

  You can get more help on the forum specific Proliant here:

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VCIs4PldXuI

• Can I install a brand new SBS2011 OEM standard that is not used on an ESXi host?

  I have a client who needs anupgarde to their existing system of SBS2003. They buy a standard OEM of SBS2011 copy from Amazon despite me providing the details for a full purchase of reatil! I need to know, what I can put in place the new SBS2011 system on a host ESXi 4.1? It is the only facility of it and I will use the swingmigration for installation kit.

  Sorry I can't find a relevant server/sbs forum right now.

  Thanks for all the answers.

  Hi Justindev,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Small Business server on TechNet forum. Please ask your question in the Small Business Server TechNet Forums.

• Dell custom ESXI 5.5 update Manager software

  Hello

  I installed some Dell R710 server custom Dell ESXi 5.1 Version.Now I would update this ESXi 5.5 servers (Dell Version)

  Question: Where can I find as a Dell of ESXi 5.5 custom Version for VMware Update Manager (.zip)

  Thanks for help

  What about Peter

  Hi Peter,.

  You can download the ISO from Dell here:

  www.dell.com/.../DriversDetails

  Be sure to upgrade your vCenter and Update Manager 5.5 before trying to download the ISO (under ESXi images).

• OMIVV 3.0 - errors "Hypervisor not taken in charge", cannot day several firmware M610 hosts / ESXi 5.5 U2

  We have just updated OMIVV to version 3.0.

  We have problems with 3 guests in our infrastructure - M610 all running ESXi 5.5 U2 P55.  Any report of strangely hosts in OMIVV.

  -"Unsupported hypervisor" is reported in the screen "check hosts compliance."

  -We can update the firmware on the individual hosts, but the update of multiple hosts in the cluster level does not at all.  The inventory of the firmware page does not display anything.

  All the other features seem to be working on these hosts and all of our M620 do not act in the same way in OMIVV.  All the firmware is completely updated already on all hosts.

  Hi eltuga,

  Officially the 2950 is not supported by VMware to run vSphere 6, see http://www.vmware.com/resources/compatibility/search.php?deviceCategory=server

  

  Also the integration of the Dell OpenManage for VMware vCenter also does not support the 2950 more see the http://topics-cdn.dell.com/pdf/dell-mp-vc-3.0_Concept%20Guide_en-us.pdf compatibility matrix

• Upgrade VMware ESXi 6.0 Update 2 VMware ESXi 6.0

  Hello I am running my PowerEdge T110 II with VMware ESXi 6.0 - Dell customized image. I see that from April 15, 2016 Dell just introduced VMware ESXi 6.0 Update 2 and I'd like to update my system.

  On the download page , I see there is an option to download and the ISO file. I wonder if this installation will completely be wipeout my existing VMware ESXi 6.0 - Dell custom and all the settings and I have to start all over again or update 2 ISO just 'modernize' my network?

  Hello

  You can use it to update without doing a new install. KB.VMware.com/.../Search.do; cmd = displayKC & externalId = 2109711 #Inter

• OpenManage 8.3.0 ESXi 6.0 bug?

  I think that I found a bug.

  I create Custom ISOs for ESXi 6.0 so I can include the latest drivers and the VIBs for our storage.

  I created a new ISO with ESXi 6.0 Update 2 with the last VIB Dell OpenManage 8.3.0.

  (6.0) vCenter Update Manager, I have the Dell repo as a download source: https://vmwaredepot.dell.com/index.xml

  I downloaded the OpenManage 8.3.0 VIB from here:

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  However, now when I run a scan of the host with Update Manager, it fails and the error in esxupdate.log:

  2016 04-28 T 15: 44:03Z esxupdate: esxupdate: ERROR: ValueError: cannot merge VIBs Dell_bootbank_OpenManage_8.3.0.ESXi600 - 0000, 0000 - Dell_bootbank_OpenManage_8.3.0.ESXi600 with the attributes of uneven loads: ([OpenManage: KB 7809,081], [OpenManage: 7807,439 KB])

  I see an older version of OpenManage who had this same error and it was a bug.

  Things I've done: database reset VUM, which I can then analyze the hosts successfully. Once I added in the repo of Dell, he begins fail again with the error above in the esxupdate.log file.

  Anyone else see the same thing?

  The last I heard about Dell, they said that they would not solve this problem, but to focus on the next version. I have not seen a 8.4 version, so as a work-around, you need to uninstall OMSA 8.3 of all your machines and then reinstall it from the repo.

  Huge PITA so. Another option is to reset your vCenter VUM of the base and do not add in the repo of Dell. Then you will be able to scan your guests without problem again.

  Thanks Dell!

• Difference between ISO ESXi M420 and M630. Is this the same ISO?

  I will install 6.0 ESXi update 2 of 3 new servers M630.  I used the ISO next to install my m420s:

  VMware-VMvisor-Installer-6.0.0.update02-3620759.x86_64-Dell_Customized-A02.iso

  This ISO works for my m630s so?

  These aircraft were ordered and received by a dealer, and they don't did me not service tags.  This is why I can not add to my products and see the available downloads.  This can become a common problem for me because I am in charge of the deployment.  Thank you in advance for the answer to my question.

  Yes, it's the same file. The two show under systems supported and same hash.

• 8.3 OMSA @ ESXi 6.0 U2 @ R515-> cannot log into the website OMSA to ESXi HOST.--

  Hello guys.

  I've updated my ESXi of U3 5.0 to 6.0 U2 and I lost my OMSA. I can not connect from the web page.

  For the update of the host, I used this ISO file:
  . VMware-VMvisor-Installer-6.0.0.update02-3620759.x86_64-Dell_Customized-A00.iso

  After that, I installed OM-SrvAdmin-Dell-Web-WINX64-8.3.0-1908_A00. EXE to a VM W2012S to this host. I can open the web site to connect, but when I try to connect to my ESXi HOST, I received this message: failed to connect... connection error.

  When I saw that I began to check a few things, I ran: 'list of vib software esxcli' and I saw:
  Name Version Date seller installation acceptance level
  ----------------------------- ----------------------------------- ------ ---------------- ------------
  ...
  OpenManage 8.3.0.ESXi600-0000 Dell PartnerSupported 2016-07-29
  Reference Dell-configuration-vib 6.0 - 2A 00 Dell PartnerSupported 2016-07-29
  iSM 2.3.0.ESXi600 - 0000 Dell PartnerSupported 2016-07-29
  ...

  Another very strange for me, is that I can't see any reading of the sensors to Interface web server: HOST /... / or Vsphere Client.
  But I can read a large number of web page Idrac and ESXi SSH data using ' esxcli ipmi sdr list material.
  Node-sensor Description-reading raw reading of raw Timestamp/comment base calculated entity Instance
  ----------- --------------------------------- --------------- ---------------- ----------- ----------- ------------------- ---
  0.1 1 Temp 3.1 processor 38 degrees C 166 2016-08 - 01 T 14: 18:32
  0.2 2 Temp 3.2 processor 34 degrees C 162 2016-08 - 01 T 14: 18:32
  0.5 power 1 10.1 Temp 40 degrees C 168 2016-08 - 01 T 14: 18:32
  0.6 power 2 Temp 10.2 37 degrees C 165 2016-08 - 01 T 14: 18:32
  0.7 power Supply 2 Temp ambient 10.2 26 degrees C 154 2016-08 - 01 T 14: 18:32
  0.8 power Supply 2 Temp ambient 10.2 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.12 system Board 1 BIO Temp 7.1 44 degrees C 172 2016 - 08-01 T 14: 18:32
  0.14 front Panel Board 1 Temp ambient 12.1 16 degrees C 144 2016-08 - 01 T 14: 18:32
  0.13 system Board 1 Temp Planar 7.1 28 degrees C 156 2016-08 - 01 T 14: 18:32
  0.10 memory Module 1 Temp 8.1 24 degrees C 152 2016-08 - 01 T 14: 18:32
  0.11 memory Module 2 Temp 8.2 36 degrees C 164 2016-08 - 01 T 14: 18:32
  System of 0.48 to edge 1 FAN MOD 1A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System to 0.49 to edge 1 FAN 1 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.50 to edge 1 FAN 2 a MOD RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.51 to edge 1 FAN 2 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.52 to edge 1 FAN MOD 3A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.53 to edge 1 FAN 3 b MOD RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.54 to edge 1 FAN MOD 4A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.55 to edge 1 FAN MOD 4 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  System of 0.56 to edge 1 FAN MOD 5A RPM 7.1 2760 RPM 23 2016-08 - 01 T 14: 18:32
  System of 0.57 to edge 1 FAN MOD 5 b RPM 7.1 0 RPM 0-2016 - 08-01 T 14: 18:32
  Power supply 0.148 1 1 current 10.1 0.6 amps 15 2016-08 - 01 T 14: 18:32
  Power 0,149 2 current 10.2 2 0.48 amps 12 2016-08 - 01 T 14: 18:32
  0.150 1 power supply 1 10.1 206 Volts 103 2016-08 - 01 T 14: 18:32
  0.151 power 2 2 10.2 206 Volts 103 2016-08 - 01 T 14: 18:32
  System of 0,152 onboard System 7.1 220 Watts 22 2016-08 - 01 T 14-1 level: 18:32

  The details of the server are:
  BIOS 2.3.0
  IDRAC 2.85 (Build 04)
  Lifecycle controller 1.7.5.4

  Any kind of help to connect to the host ESXi OMSA is welcome!

  This is the correct service.

• 2.2 - ESXi - no State health of OME

  I try to get OpenManage Essentials 2.2 health of ESXi.

  A server ESXi 5.1 and OMSA 7.4 Health Watch
  Servers with 6 ESXi and 8.3 of the OMSA only show a grey question mark.

  I can find no documentation indicating which versions of ESXi and OMSA is compatible with 2.2 OME.

  I found that something was off with the OMSA package deployed via the Update Manager. It showed as being in line with the base line, but I re-uploaded VIB in the Nativity update repository, created a new base line and attached hosts. The hosts showed now also fort and OMSA installed OK.

  OME now see the health status.

  But, under Data Sources in the display of the device, the administrator of the server (storage management) and VMware ESXi have a triangle of yellow warning next to them. How will I know what is the reason for these warnings?