Satellite A50 - goes out of himself during the race

Similar Questions

• Satellite M55 goes out when you disconnect the power cable

  Hello

  to unplug my laptop the plug rather than switch to the battery, my laptop turns off often simply even if the battery is fully charged. Other time things work as it should.

  I did some research and my problem seems similar to that detailed here in this post.
  Maybe someone knows the solution for this problem?

  Thank you.

  Hello Luke

  As in the other topic described, you must communicate with the service and explain exactly what is happening. I fear that there may be something wrong with electronic power supply. We can just speculate on this.

  I fear unfortunately there is nothing you can do alone.

• Satellite A300 power suddenly goes out during the race for hours

  Dear users of the Forum,

  I am facing a strange problem in operation.
  My laptop Satellite A300 is suddenly down power during the race for hours.
  It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

  This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

  I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

  Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

  I tried to run only on the power (remove battery) and got the same result.

  can anyone identify the problem? can you please give me the solution?

  smarjit1

  Hello

  I put t think it is s virus.
  En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
  I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

  Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

  What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

• trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea?

  trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea? I got a microsoft tec tring to understand with a bit of luck again!

  Hello

  in this case, contact the HP support

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

  or HP Support forums

  http://h30434.www3.HP.com/

  or repost in the correct forum for windows 7 that I have already advised you to do

• Apple Watch freezes during the race

  I used my Apple Watch during a 21K run. I used the training software to monitor my heart rate during the race.

  After the mark at halfway, the screen dimmed, and the screen froze. (stopped adding distance, and heart rate has been replaced by '-'.)

  thinking that it was because of the excessive sweat on the sensors, I tried to wipe the back of the better watch that I have (which is not a lot considering everything that I had on me was wet). by pressing the digital Crown to return the screen to the face of the watch, but whenever I go to the app to drive he would show the same frozen screen.

  It is only after a kilometer (about 7 minutes) made the response to training app and worked normally until the end of the race.

  for the purposes of the workout on my Apple Watch concerns, I had only run 19,71 km instead of the 21 K who I actually ran.

  question: How can I prevent this happening again?

  Hello

  As a first step, if you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
  • Update the software on your Apple Watch - Apple Support

  It can also help to revive your watch:

  • Restart your Apple Watch - Apple Support

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• Compiling jsx to jsxbin, Palette disappears during the race

  Hello world

  My ID version is CS5, I added # targetengine "session."

  I compile jsx to jsxbin, but the palette disappears during the race.

  Anyone can tell me the reason?

  Thank you.

  Best regards

  Goldbridge

  You can wrap the content of jsxbin inside app.doScript () routine and add engine target in front of her.

  

  Hope that helps.

  --

  Marijan (tomaxxi)

  http://tomaxxi.com

• Satellite A100 - messages of weird info during the recovery process

  This is the first time I tried to recover my Vista PC from Toshiba.

  During the recovery, I got this in CMD

  "C:\boot(something here) restore s Descriptor." seq. 26 - SACL rest. "
  "C:\SWStamp.txt s restoration Descriptor. SEQ 25 - list SACL will not go away.

  (1) is this normal?
  (2) what it means?
  (3) I even did a FULL format?

  Thanks a lot guys

  Hello

  During the recovery process, you will see some messages, that's nothing unusual
  Important is that the procedure does not stop but continues and after some time, the Win operating system should complete the installation
  Wait a bit and see if the procedure would end...

  If the procedure to hang himself, then start recovery and boot from the disc reocvery...

• Satellite A50-109: CD burn successfully but the disc is empty!

  After working fine for a year, I get this weird behavior my CD burner:
  Burn process ends seccessfully but the disk is empty.

  I use a laptop model Satellite A50-109 with winXP pro sp2 installed.
  Driver Toshiba is recognized by XP and everything seems to work fine except the drive is still empty.

  This phenomenon is the same when using original burner XP or Nero.
  So, seems to me like a hardware failure.
  Am I wrong?
  Is there a way to check the material before applying it to the service provider?

  Thanks for your attention
  REA

  Hello

  Have you tried burning different media?
  Not all CD or DVD is compatible with the player.
  Usually, you should find tested and compatible media in the user manual which must be preinstalled on the laptop.

  I m not 100% sure, but as far as I know the reader doesn t write on + media
  I recommend you to test some different manufacturers of disc form.

  Just FYI; I use TDK and I m very happy.

• Monitor goes into sleep mode during the installation of Windows 7

  Hello, I'm doing a new install of Windows 7 pro on a new SSD. He gets regarding to reset for the second time during the installation, and just before showing the page where you name the computer and configure user accounts, the monitor goes to sleep and won't return. only way to recover is to reset the machine, only to do exactly the same thing again. Anyone know what could be the cause? I used the same disk of windows for many expenses format / install Windows after hardware upgrades in the past and this has never happened before. Can provide the complete specifications of the system if necessary. Help, please!

  Hi Danpedro,

  I see that the screen goes into sleep mode, in the last step of installing Windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you have an external display driver card attached to the motherboard?

  3. you format the hard disk during Windows 7 installation?

  Method 1.

  Disconnect any external devices and restart the computer to see if it helps complete the installation of Windows 7.

  Method 2.

  If you have a driver to attached external display card, then you can disable this external driver in the BIOS and check if that helps complete the installation of Windows 7.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Satellite Pro A100: Trojan warning message during the windows BIOS update

  Trying to update my Bios through windows, my anti virus (f-secure) has a crush on decompressing the zip file a warning.

  The warning pointed out that the folder contained a Trojan horse and that he had been cleared to protect my computer.
  A warning from microsoft also said that access to these files had been blocked to protect your system.

  Is it possible that this update, downloaded from Toshiba really contain malware or could there be another reason for this event?

  Advice for help would be appreciated

  Post edited by: james7dean I have a satellite pro a100 o/s windows xp pro

  Hi james

  Don't you panic! You BIOS are not affected by Trojans, Malware or viruses.
  For the most part these BIOS files are not known for anti-virus applications and, consequently, anti virus software reports and notifies a virus.

  Before you start the update of the BIOS, you must disable automatic virus protection!

• Satellite L500-21dts - Stop error code during the installation of Windows 7

  Hello

  I bought a laptop Satellite L500-21dts of Saudi Arabia.

  I lost the hd recovery during try windows 7 installation difficulty. If I try to install windows 7, I get the stop error message code 0x0000009c. If I turn sata to AHCI Windows xp sp2, sp3 installed, compitibality but most of the drivers such as display and wlan not installed. To date give BIOS which is not appropriate for the version of phoenix bios 1.5

  I changed the RAM and HD, but the same problem. It may the BIOS?

  Please help me

  Hey Buddy,

  I m a bit confused now... Do you have Windows 7 or Windows XP?

  If you miss some drivers after installing XP, why you update the BIOS?

  As far as I know Satellite L500 is supported by Windows XP if you can download all the missing drivers and tools of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Check this box!

• Table goes out of alignment in the text box

  I created a very simple table in InDesign CS5 on Windows 7, like this:

  

  However, when you start typing in a cell, it goes like this:

  

  To fix, you make the text bigger or smaller box and then resize it to what it is supposed to be. Also when I do a first page datamerge moves like that too, even if the rest is correct. When you export to PDF it comes out wrong as well. If anyone wants an example file that I can post it here.

  Anyone have any ideas what's causing the alignment change when text is entered into the table?

  Well, I think I see here the rub - if you left me speechless for a while there!

  So, I see that you have the text box that contains your table to help you align your table in the center of your page. (i.e. the box containing the text is organized around the outside of the page and the table is centered lef/right using point centering and up/down by using the command "Center" in the control bar. There is nothing particularly wrong with this method, I think it may be the source of your problems with alignment change unexpectedly.

  Looking at your file, I found that the removal of "Center" and change to the opposite to "align top" took the nervous behavior of the text box. It is more shifted when I tried to type. He however move the entire table to the top of the screen. For now we'll leave it there. Align the Page: Centre from left to right, Center t to b.

  Your final result should be an element that is always perfectly centered on the page, but which can be of type in without any unpredictable jump around!

  Now, we will select the entire area that contains the table. In the paragraph Panel, click "Left aligned". This will move the table to the top left of your document. Now, frame content. Go in the Align Panel.

• Satellite A500-026 overheats and stops during the game

  Hey guys, any help would be appreciated.

  My 026 has recently started to overheat and stopping at random during video games. I can't even run TF2 to learn more, then one hour unless he suddenly died on me. It is never used for this months of use.

  I can assume there is a problem with my video card. I tried to download drivers to Toshibas site and the latest versions of Nvidia without change. I've already booked a Mobilecare service, I wanted to just evaluate what might be the possible problems.

  Hello

  Maybe this problem of high temperature of s.
  High temperature causes a closing down in order to protect the equipment against damage.
  But the question is why the temperature increases to critical level?
  One of the reasons could be a page nvidia graphics card driver. Such driver does contain protection against overheating. Therefore, use the driver of Toshiba page.
  I see that you did
  Well, the laptop seems to be a new a .so usually dust should not be a problem and fans should work properly

  A tip; Please make sure that you have enough free space around the laptop to ensure good air circulation.

  However, I recommend asking an ASP in your country for verification may be what he s hardware related issue.

• Satellite 5105-S702 Touch ED error during the startup process

  When I start my Satellite 5105 - S702 laptop with the v8.4.0.24 of antivirus from Computer Associates (CA) software is turned on, I get the following at the end of the boot process error message:

  Error affected

  Recovery of the THotkey failed. "
  Part took place - TouchED.exe - (THotkeyFindProc)
  Function failed - FindWindow)
  Error code: 0 x 00031402, 0x00000002

  However, when I disable the CA antivirus software and restart the laptop, I don't get the error message.

  Thus, it would seem that the CA AntiVirus software causes this error message.

  Would be grateful if someone could give advice if they have this problem with this laptop model, or the Satellite 5105-S701, or European equivalent model 5100-603, and how they have rectified it.

  Thank you

  AlanCB

  Hello

  I agree with you.
  In my view the installed (CA) anti-virus software is not fully compatible with the Toshiba Hotkey Utility or the software anti-virus doesn't recognize properly and can not handle.

  CA anti-virus does not for me but maybe you could set some parameters to ignore the Hotkey Utility from Toshiba.

  Maybe it helps if not I recommend you contact Computer Associates support team.