Similar Questions

• HP Pavilion dv9548us with Win 7 Home Premium 64-bit. I have HP Cool wInstall sense 2.0

  I have HP Pavilion dv9548us with Win 7 Home Premium 64-bit. I tried to install HP Cool feeling 2.0 but the installation was completed with error massage 'there is a problem with this Windows Installer package... "The same problem with Cool sense 2.1. Please help me solve this problem.

  Thank you.

  Hello

  What follows is certainly not what you wanted to hear, but it is frank and honest.

  There is no support for Windows 7 on your laptop. If you were able to get to the top and running, so you were lucky.

  The only provided HP drivers and applications that are available for your laptop are for Windows 2000, Windows XP and Windows Vista.

  You can try to install the Coolsense driver in compatibility mode, but there is absolutely no guarantee that it will work.

  Just as it says on the download page of Coolsense, "this feature is available on mobile phones supported running a supported operating system." Unfortunately, your laptop is not grave in either categeory.

  Best regards

  ERICO

• How display the date and the time in the taskbar on Windows 7 Home Premium 64 bit system?

  How display the date and the time in the taskbar on Windows 7 Home Premium 64 bit system?

  I already did it.  The time is displayed in the correct format, but I can't seem to view the date of

  Any other suggestions?

  Thank you

• wireless connection of losses on the reactivation of vista home Premium 64-bit

  My windows Vista Home Premium 64-Bit loss wireless connection on the awakening. I then have to make a stop down and re boot the lap top. Any suggestions/corrections?

  Hi Funnyman4u,

  Check to see if the problem exists in a clean boot state,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• display of the missing volume - HP Pavilion dv7-6168nr Windows 7 Home Premium 64-bit.

  Used to be a cycle diagram to raise or lower the volume.

  Hello

  Download and reinstall the HP OSD utility on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55152.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Pavilion dv7-1135nr, Win 7 home premium 64-bit OS. I can't correct 2 peripheral problems in Device Manager

  1. ADS Instant HDTV PCI, error code 10, I upgraded vista to win7 recently and reinstalled the drivers of HP technical support web. Are these proposed pilots accurate? I have installed TV tuner.

  HP has drivers for a TV for this model or a USB tuner or tuner Expresscard.

  More that likely that the driver Vista are not compatible with Windows 7 and HP does not offer any for W7.

• Can I play Rise of Nations/Rise of Nations Thrones and Patriots on windows 7 Home premium (64 bit)?

  Original title: can I play rise of nations / mounted the thrones of nations and the Patriots on windows 7 Edition home premium (64 bit) Please tell me quicklyyyyyyyyy please

  an enternainer...

  I have Rise of Nations / Thrones and Patriots and the game plays absolutely perfectly on my Windows7 Home Premium 64-bit system. Given that some people have problems, and others like me have no problem to run the game, I suggest that you go to the homepage of the game and try the demo before you buy the full game.

  http://www.Microsoft.com/games/riseofnations/

  http://www.Microsoft.com/games/thronesandpatriots/

• driver ethernet controller and Windows 7 Home Premium 64 bit HP 110-3000 pci device driver missing

  I need the driver for ethernet controller and pci for Windows 7 Home Premium 64 bit device driver

  Someone please help

  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04
  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C & REV_01
  PCI\VEN_10EC & DEV_5288 & SUBSYS_148A103C
  PCI\VEN_10EC & DEV_5288 & CC_FF0000
  PCI\VEN_10EC & DEV_5288 & CC_FF00

  Hello

  Try the following:

  http://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49600.exe

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48885.exe

  Kind regards

  DP - K

• Remote Desktop connection: Windows 7 Home Premium 64-bit connects to the computer of Windows XP VPN

  Hi all

  I am trying to establish remote desktop TO my new laptop (Windows 7 Home Premium 64-bit) on my computer (Windows XP) work via a VPN. The VPN Client connects to my network to work with no problems, but when I try to use the remote desktop connection I get an error message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are working well, so I guess that the problem is caused by another issue?
  I'd appreciate any help.
  Thank you
  Lou

  Thanks for your response Al. To answer your qus:

  (1) cisco VPN Client for 64 - bit.

  (2) I don't know how to ping through the VPN tunnel - I don't see this option, anywhere in the Cisco customer (I'm not a professional, just a user)

  (3) Yes. Also, I can connect to the host PC via my old laptop XP (xp) of fine House, just not my new laptop (Windows 7 Home Premium) so the problem must be with my new laptop rather than at the end of the host PC.

  After that you connect through the VPN tunnel open a command window, IE. go in Start > run , then type cmdand type ping DRC-hostname or IP-address-DRC ping.

  Examples:

  Ping lou - pc

  ping 192.168.1.25

  FWIW, I have a desktop computer home wireless Windows 7 Home Premium SP1 64 bit on my LAN that connects fine to a XP Pro SP3 32-bit Wired test machine using [DRC] remote desktop. Now XP Pro SP3 DRC test machine is configured for a static IP address and I have manually configured the network mask, gateway, DNS resolves and made sure that NetBIOS over TCP/IP is enabled in the properties of the NETWORK Ethernet card on the test computer.

  Just for fun, I checked the hashes of file for the file mstsc.exe on the Win 7 Home Premium 64-bit machine and a machine Win 7 Home Premium 32 bit I have and hashes were a bit different as the size of the files. The versions of the files are the same though. I assume that the difference is because we're 64-bit to 32...

• Pavilion dv7t-4000 laptop: AMD HDMI port on the computer laptop dv7 is lost after free trial Win10 returns to Win7 Home Premium edition

  My laptop was purchased in sept 2010 and runs Win7 Home Premium Edition (64-bit).

  It worked perfectly until June 2016, when the trial version free odious Win10 forced itself on my laptop.  I had no choice, I used Win10 for a day or 2 and then discovered that:

  (1) I lost the audio capability, HDMI port, I use to connect to my TV, and

  (2) the Win10 trial enabled me to return on Win7, I did without delay.

  In my Win 7 restored, everything was fine, except when I have her go in Control Panel to configure / reconfigure HDMI as the default, I couldn't - the element used to appear as "AMD HDMI Audio" is no longer displayed.  I remember a message during the free trial period Win10 that says it has disabled any material incompatible.  Without a doubt, Win10 free trial 'killed' this HDMI/device port, at least audio-wise.

  Today, I always run the same Win7, but I can't have audio HDMI on this port.  When I connect to my TV, the video works.  Win7 Device Manager it shows with an exclamation in yellow, and when I right click to get more details, there is a message saying Microsoft:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52).

  Is there a way to 'get it '?  'this' is AMD HDMI audio.  (and wthout spoil the graphics - that is, video)

  I tried to install the drivers provided by AMD [graphics] and that did not work. The Internet from AMD website says that the audio drivers are included in the package for graphics drivers.  There is also a huge confusion in the way these low level items are named/described: ATI and AMD, because they have merged, were used somewhat interchangeably.  I also tried the graphics drivers AMD HP Support Web site specific to my laptop and it has only gotten worse.

  Thank you for your kind attention.

  Hi @ RTX,

  Awesome response. I read the details and depth of your post. I understand that the bios is updated. So you could end up with this update.

  Happens to the other updates. This will be the order.

  1. Uninstalling the driver Chipset and resettlement.

  2 reinstalling and uninstalling graphics drivers

  3. uninstall the sound drivers and reinstall.

  Before uninstalling, you can try to update the drivers supplied by device also Manager and if that market that will be great. Please, do it only if you don't have already done.

  Before uninstalling please make sure that you capture an image of the complete Device Manager window. Take some pictures of your cell phone. Please note the exact device for audio and video chipset drivers. Then, you will need to uninstall it from the Device Manager and install from the support site in the above order so that there is no confusion.

  If nothing works as a last resort, you may need to restore complete system to factory settings. Please backup your files before doing so. This is possible since the recovery of your computer's hard drive partition.

  Link to the system recovery: http://support.hp.com/us-en/product/HP-Pavilion-dv7-Entertainment-Notebook-PC-series/4284279/model/4221688/document/c01867418/

  Please hold me. I hope that it pans well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Inoperative"HP Support Assistant" on a HP Pavilion p7-1254 to help de-Windows 7 Home Premium 64-bit

  Product name: HP Pavilion p7-1254

  Operating system: Windows 7 Home Premium 64-bit

  Error message: HPSF.exe has encountered a serious problem and needs colse.  Click 'OK' to outomatically restart this application

  Changes to the system: NO

  When the error occurs?  Is this a feature repeated at startup or at another time?  Updates to the system recently (Windows Update or other updates from HP support)?

  The normal solution for most of the problems with HP Support Assistant is to uninstall the application from the control panel / uninstall a program.  Then download and install the latest version of HP Support Assistant from the HP Web site:

  HP Support Assistant

  Search the topic download HP Support Assistant and select laptops or desktop computers, according to the case.

• Pavilion g6: no update of the download links for Windows 7 Home premium 64-bit?

  I have a pavilion g6 and my hard drive has been corrupted. I had windows 7 Home premium 64-bit preinstalled, but could not find a new download links for the ISO, as they have all been removed. Anyone know where I can download the ISO?

  I have not personally used these links, but the answers he is other people are positive:

  http://getintopc.com/softwares/operating-systems/page/8/

• 8530w Win7 Home Premium fresh install - Wifi and bluetooth radio off just not online

  Hi all

  I encountered a strange problem. I did a fresh install of Windows 7 Home Premium 32 bit edition. I installed all the essential drivers; setting network, wifi, quick launch button drivers HP and others. Wired network works fine. However, the wifi button is orange and does not work on contact. All other keys work well, so I guess we can exclude. The driver is loaded OK and the hardware is connected according to the Intel Pro Set diagnostic tools. However, he also pointed out that the radio switch is thrown off, so the orange light right?

  The radio is off, bluetooth driver moved not because of 'not present material' and I can't enable it.

  I've seen other people with the same problem, but a majority of those who appear to have been related to the HP power management. And as this is a clean install, I don't think that power management is the problem. Just to be safe, I disabled the power management capability in the adapter properties.

  So, is there another way to activate the radio via the software without relying on the button of the Panel wifi? Are there other ways to diagnose the problem?

  Thanks for your help!

  Best regards

  / Thomas

  Have you installed extensions Intel Proset for Windows 7?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D4%257CswItem%253Dob_83281_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Have you installed the HP Wireless Assistant?

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3999719&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_84194_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You can activate wifi via network connections

  

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• Will be device drivers (printers, USB Hubs, router, wireless, etc.. wired routers) who currently works for Windows 2 K and XP (SP3) on Windows 7 Home Premium 64 bit?

  Old devices connect to computers with Windows 7 home premium 64-bit.

  Hi Eventers,

  Thank you for visiting Microsoft Answers.

  Access the link mentioned to check if your hardware is compatible with Windows7 below:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can also download and run the Windows 7 Upgrade Advisor to see if your computer is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.

  Visit this link to download the Windows Upgrade Advisor:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15&displaylang=en

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.