Even-numbered VLAN online how are supported on JOINT-2

Similar Questions

• After dialing a call and then if you need to enter additional numbers etc. (how are you?)

  Once you've placed a call; the dial disappears; so, if you enter additional numbers etc. How are you on Skype?

  https://support.Skype.com/en/FAQ/FA22/how-do-i-dial-an-extension-during-a-call

• Portege M300 - how many bits are supported by LBA

  Hello

  Anyone know how many bits are supported by LBA? It has 48-bit?

  I need to know if I can get a 120 GB hard drive against a 160 GB for a major upgrade.
  I can't find this information on the toshiba site: is there a changelog BIOS place?

  Thank you

  Yes, as far as I know the LBA (Logical block addressing) use 48-bit.

  Check this box:
  http://www.48bitlba.com/

• I tried dnlding flash player @ least 30 times... Most of the time he worked, but only for 1 session... I even disabled my AV, how to keep in my system or get HTML 5

  I tried dnlding flash player @ least 30 times... Most of the time he worked, but for 1 session... I've even disabled my AV, how to keep in my system, or get HTML 5?

  Hello

  How are you trying to download Flashplayer?
  I suggest that you follow the methods provided and check if it helps to solve the problem.
  Method 1:
  See the link, then run the Fixit. This will help remove all traces that might have left a previous installation of Flash Player.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
  Method 2:
  Step 1:
  Perform a clean boot and install Flashplayer. Clean boot to disable non-Microsoft services which can otherwise cause conflicts during installation. Check out the link and follow the steps.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Important: after you have completed troubleshooting. Make sure that you follow the steps in the article to put the computer from starting in Normal mode.
  Step 2:
  See the link, download the application on your desktop computer and then run the installation.
  
  http://get.Adobe.com/flashplayer/
  Alternatively, you can contact Adobe support on this issue. Check out the link.
  Flash Player Help / installation issues. Flash Player | Windows

  http://helpx.Adobe.com/Flash-Player/KB/installation-problems-Flash-Player-Windows.html

   

   

• HH.exe crashes - lost connection to the online help and Support window

  HH.exe crashes - lost connection to the online help and Support window

  SYSTEMATICALLY, FOR MONTHS, WHEN I SEARCH WINDOWS HELP I got THE MESSAGE.

  "You have lost your connection using Windows and Support website. . Try to connect again. "
   

  Windows Error Reporting shows several times:

  1. HH.exe hangs and does communicate with Windows
  2. MsSearch TerminateProcess & #x000d
  3. ApphelpSoftBlock & x000d #.

  I have no problem connecting to Windows Web sites otherwise or to other sites on the web.

  Can someone tell me how to fix this?

  (I'm running VISTA 32 bit)

  Hello

   
  This behavior is caused by a corrupted or damaged HH. DAT file.
  
  This may occur if Antivirus or a firewall, you have installed the program it blocks.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• How I support windows vista on cd to reinstall it on my other computer that wont start up. He's wiped and there is no recovery disk.

  ? How I support windows vista on cd to reinstall it on my other computer that wont start up. He's wiped and there is no recovery disk.  It also has stickers with license numbers.

  Hello

  There is no download free and legal Internet for vista

  Here are the different ways to reinstall vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Equium A60-191: number of Modem - only an analog phone lines are supported

  My Equium A60 has been turned on when lightning struck nearby and caused the power supply turn off and turn back on.

  The OS is XP Home and my ISP is AOL. When I try to access the Net with DUN, I get the repeated error message:

  "Connected phone line is not compatible with this modem. Only analog phone lines are supported. »

  My desktop computer, which also uses AOL, always connects to the same phone line with no problems.

  I restarted the A60 several times; changed and I tried the 2 phone connection cables - both work; the phone line works very well; I reinstalled the driver provided on this site; removed the tick from the box that says to wait for the telephone line; verified that the modem is working and on the Device Manager list. All this is in vain.

  Convenience store suggests that COM 3 is not enabled. I don't see that com 3 listed in the device under Ports Manager.

  I tried Google and ASK with the error message. There is not a lot of posts, and it seems that the Toshiba modem is actually an Agere. This fact seems to be the object of some of the complaints.

  Finally, I uninstalled the driver/modem, AOL and another DUN connection. I restarted and went through the process of installing AOL and "new hardware". While the modem is on and allegedly working... I am still unable to connect to the Net. I reinstalled an additional 'pay as you go' ISP. When I try to dial a number on which it generates error 680. It does this even when the box is unchecked, to wait for a dial tone.

  I would be very grateful if someone could help it. I'm out of ideas.

  Thank you very much.

  Hello

  You are right, the modem supports the Modem Agere chip.
  You won't find the COM3 in the Device Manager for the modem uses a non-real com port. It s virtual com port.

  I think you should start the diagnostic tool test and check if the Modem has no malfunction.
  Additional you must remove the connection in the region Select utility and after restarting again create a new.

  I also found useful Microsoft article on troubleshooting network and dial-up connections.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/trouble_all.mspx?mfr=true

  and you'll find info on the error of DUNS 680:
  http://www.Modemsite.com/56k/duns680.asp
  http://PHP.iupui.edu/~aamjohns/trouble.html#no tone

• How are checks on the screen?

  Hello

  I want to add on the screen controls to custom FCP generators and effects. How are controls in movement on the screen?

  Thank you

  Ivan

  Basically, you need to use those already provided in motion (unless you can program the FxPlug plugins).

  You'll find commands to the screen in several filters. The most common is Poke (in the set of filters of distortion.) However, * any * filter CSOS have to publish in its parameter list can be used and there are several different types. ('Exotic' favourites are blur > blur Gradient, tile > Kaleidotile and aesthetic > extrusion.)

  Create a new top-level group - rename CSO (or CSO if you have more than one). In the Group Inspector (you * must *) set a fixed resolution 2D. (Otherwise will be very unexpected effects.)

  The group selected, add filters > distortion > Poke.

  In the Inspector of Poke, find and check CSOS to publish.

  Note: the group still has a length of 0 images. You can in properties > calendar > and set the time to the length of your project (or more) or more simply, just add a shape: rectangle, circle, what is practical and then put it in the wide (or turn off the group so it does not appear). The group will have its length defined for the duration of the project (if your preferences > project > create a new layer at the beginning of the project is on or your playhead is 0.) Onscreen controls appear only in FCPX to the number of frames including the object/group parent in the timeline panel. Simply adding a filter does not add an object and filters have no length if there is nothing to act accordingly.

  Add behaviors to link to the X and the parameters Y of your object under control. (You need add separate links to individual settings, because there is a mismatch of types of settings.)

  In Wells of the behaviour Source object, add the group to the OSC. For the Source parameter in the compatible settings drop-down list, select Filters.Poke.Center.X and Y respectively.  Your object will move to the upper right corner of the canvas. At the bottom of each link behavior Inspector, there is an Offset value. Define each of these to-0.5 (which resets the object in the middle of the canvas.)

  Your object will now be controllable in FCPX with the control on the screen.

  You know how application relates to several destinations resolution and how it applies to what you were doing just a little.

  Motion (very skillfully I must add) treated all resolutions screens as having the coordinates of 0 and 1 (inclusive). No matter what draft resolution you have, SD, HD, 4 K, etc... Controls of the OSC are considered as having the same dimensions. Real pixel values are calculated from the screen resolutions for horizontal and vertical to the destination video (project) dimensions. [Fixed resolution dimensions help you determine the proportions in FCPX, but according to me, are automatically set to adapt to the target FCPX project when it is applied.] Maybe it's not always true, and if you make adjustments, then you essentially override this behavior in your specific model project. See below.]

  In the middle of the canvas to an object, as a form, etc., is (0,0), but for a CSO is 0.5, 0.5. When you create a relationship between an object and the parameters on-screen control center, you're "setting" the Center in a different coordinate system. Compensation for these values to the negative terminal of the Center value resets the position to the original 'normal '.

  Whatever he says, you can actually fool onscreen controls by setting a custom 'resolution' of the group you places in the dimensions of fixed resolution (say: 300x500pixels). So if you want to create something like a "HUD" to appear in FCPX and have the only control flow within its limits and control another object on the screen, which can be done (using the behaviors of clamp to restrict the Center.X and the Center.Y to between 0 and 1 and the OSC will remain within the limits of the resolution group fixed dimensions you set).  If you don't 'get' this still, forget about it then for now, it is not so important and has nothing to do with what you were asking. [In the case of a "HUD" type configuration, you can create another group with other CSO to control the placement of objects on the screen HUD Group, and everything in this group would be sent as CSOS, including the CSOS of the object of HUD designed... get some practice with CSO, then venture into complicated. You are only limited by what you can put together with what you have available in motion if you do not program such things at the level of the application/plugin. [Here is an example of this type of control project - it's very simple and used to define the background color: https://www.youtube.com/watch?v=jpIxuuZuko8 - it has been designed to be taken apart and studied.]

  If you build a model with CSO and the OSC does not appear in FCPX: return in movement and check that his group has length (Timing) and make sure that you have checked the box publish CSOS (and that the effect is selected in the Inspector of FCPX - click the title bar of effect).

  On the resolution fixed. Motion, by default, the account of dynamic groups - they grow and to shrink to just be the bounding box of all that they contain. By setting the fixed resolution, you force Motion to limit the group size to what you have defined. When control of the center of CSOS goes beyond the limits of a dynamic group, it acts as a multiplier of positional - and your purpose (most of the time immediately) disappears very quickly off the screen. If your initial group of the OSC has no physical object in it, it's dynamic ratings are 0 x 0 and * any * movement of the control on the screen increases by whole numbers for each pixel, it moves. If you move the OSC 1/2 pixel in any direction, the object's Center is already aligned with the edge of the canvas.

  If you have any questions, do not hesitate to ask. This topic may be a little hard to grasp until you actually out by yourself and see it in action.

• What cloud services are supported by HP scan to the cloud?

  Hi, I am interested in buying a range of printers HP ePrint enabled with the «Scan to Cloud» feature However, I can't find any information online about what cloud services are supported. I would particularly like to the printer to be able to direct scanning to Dropbox.

  Also, can someone confirm that this is a stand-alone function of a printer compatible ePrint - for example a PC client or mobile device should not drive the feature "scan cloud"?

  There are a few applications available that support scanning to cloud, the two I know are an application of google docs and box.net application. I have not seen all apps for available dropbox.

  These are also completely made on the printer, the only thing than a PC or a mobile device is needed for is to make the account to www.eprintcenter.com and manage the account if necessary.

  The alternative is scanning to email app available that can send scans to your email instead of this account, and you could then move them to your dropbox account.

• How are added to my network WPA2-PSK authentication settings? I need to log on to my place of work.

  How are added to my network WPA2-PSK authentication settings? I need to log on to my place of work.

  original title: WPA2-PSK

  tblack1970,
  Thank you for visiting the Microsoft Answers community forum.

  This should be something that your wireless adapter on your computer supports, or does not work.  It is not a feature of Vista, but the network hardware.  When your wireless adapter on your computer sees the router which has the active Protocol, it must ask the key and once offers you the key, it needs to connect.  If you do not see this option for your network card, then you should contact the manufacturer.

  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#ECC
  What are the different wireless network security methods?

  If you plan to have a wireless network, you must configure the only people that can access your choice. Here are a few options for the security of wireless networks.

  Wi - Fi Protected Access (WPA)
  WPA encrypts information and it checks to make sure that the network security key has not been modified. WPA also authenticates users to ensure that only authorized individuals can access the network.

  There are two types of WPA authentication: WPA and WPA2. WPA is designed to work with all wireless network cards, but it might not work with the older routers or access points. WPA2 is more secure than WPA, but it will not work with some older network cards. WPA is designed to be used with an authentication server 802.1 X, which distributes different keys to each user. This is referred to as WPA-Enterprise or WPA2-Enterprise. It can also be used in pre-shared key (PSK), where each user has the same passphrase. This is referred to as WPA-Personal or WPA2-Personal.
   
  Wired Equivalent Privacy (WEP)
  WEP is an older network security who is still able to support older devices, but it is not recommended. When you enable WEP, you configure a network security key. This key encrypts the information that one computer sends to another computer on your network. However, WEP security is relatively easy to crack.

  We do not recommend the use of WEP. WPA or WPA2 are more secure. If you try WPA or WPA2 and they do not work, we recommend that you upgrade your network card to those who work with WPA or WPA2.

  Authentication of 802. 1 X
  802. 1 X authentication can help improve the security of 802.11 wireless networks and wired Ethernet networks. 802. 1 X uses an authentication server to validate users and to provide network access. On wireless 802. 1 X can work with key Wired Equivalent Privacy (WEP) or Wi - Fi Protected Access (WPA). This type of authentication is typically used when connecting to a network of workplaces.
   
  Let us know if you need additional assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How Phonegap support newly released Android/iOS versions?

  Hello

  I tried a few days find out this information. First of all, I'm a javascript developer, we try to work to find a solution to package our smartphone application of already built in a hybrid web and phonegap would be our choice.

  The problem is that we need to know/understand how Phonegap support newly released versions of Android/iOS. Meaning, for example, iOS 10 has just launched. Applications built with phonegap already working on it, or they will be soon? If newly released OS version comes with new features in their API, when will they support? I guess we could find plugins for it?

  I apologize in advance for my lack of knowledge about how applications are built for Android/iOS, native APIs, etc. As I said, I'm a frontend developer, but still learning on mobile and will get on that. Right now, I just need to understand things from above.

  Thank you!

  So far, the new features of the OS versions have always been supported sooner or later.

  In general, first Cordova then Phonegap and Phonegap Build releases a new version making apps for the new operating system platforms. In general, the first test is not the best, especially if something new in the config.xml file is needed. We've seen bugs introduced in such opportunities almost every time (like the iOS ShortVersionString, the Windows identity or preference for android-versionCode using Gradle) newly required.

  So yes, Phonegap will support new versions of the OS. Plugin authors usually catch up, too. But often, some period of time, usually several weeks until til two months, going on until things settle down after the release of a new version of the OS.

• In Relación con mi cuenta, me han cargado back veces el recibo 12,09 uno el nivembre 5 y el otro el 6 por November a mismo producto. How are posible?

  In Relación con mi cuenta, me han cargado back veces el inicio recibo, how are posbile?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html
  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• I would have used product become monthly again this month, thought that we should use this be paid a month ago. I don't want to use most. How are you?

  I would have used product become monthly again this month, thought that we should use this be paid a month ago. I don't want to use most. How are you?

  Hi Hyun,

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Kind regards

  Sheena

• I ordered accidentally two copies of items online - how to cancel one?

  I ordered accidentally two copies of items online - how to cancel one?

  http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

• How are you at the beginning or end of the timeline in a Premiere Elements project?

  Abobe dear Experts,

  How are you at the beginning or end of the timeline in

  a Premiere Elements project? I use Premiere Pro in a local

  video studio Pro you use parentheses.

  {to go at first, and} to go to the end

  These supports are not displayed in Premiere Elements.

  Can you please tell me how to go from the end of the beginning.

  or from the beginning to the end (or any point in between) without

  go scene by scene, or without scrolling to the desired location

  and clicking in the timeline panel to reposition the CTI.

  I bought elements so that I can do the editing work at home, and I hope

  that the absence of square brackets is not a built-in disadvantage to punish elements

  users do not pay for Premiere Pro.   Please say it isn't so!

  Thanks fo your kind help.  (I'm hoping for the best)

  petera42478182

  Thank you so much ATR for the article on the Mac keyboard. This is what the doctor ordered.

  The much poorer "fn" key and using the arrow keys left and right side of the

  of the keyboard are the keys start and end mac version.

  Press "fn" and left arrow moves the cursor to the beginning of the Fn,

  and "fn" and the right arrow moves the cursor to the end of the Fn.

  Thank you, thank you, thank you.

  PostScrip: many thanks to WHS as well.