Event ID 1003
Hello. I have a laptop more under XP SP3 with 2 GB RAM max. Once in awhile, he will restart spontaneously and when it is started, it will say that Windows has recovered from a serious error, and I send the error report. I go into the event viewer and the error has event ID 1003. Google said that it is a driver problem and try and update all device drivers. Well, it's an old system and there is no update driver. Have also checked for virus/malware and chkdsk, but they have no problem. Thought it might be a heating problem or a memory problem, but that seems to be normal as well. Is there anything else that could be recommended to track down the problem? It seems to run OK afterwards, but only I was wondering if I'm heading to a serious system failure. Thanks in advance.
t can help watch files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
Tags: Windows
Similar Questions
-
From the start I get network error message: DHCP error event ID 1003 began ID1002.
I have Compaq Presario SR1220NX, Windows XP, SP3. With the help of Verizon FIOS Wiresless and AOL Broadband Internet service provider. When starting up I get the message of network event ID 1003 errors and 2 times I got ID 1002. I was on the phone with Verizon, restarted Wiresless router and they did some other configurations. Looks after the router restarts and stuff and revive his party. But after a while he comes back again after cold reboot. Services DHCP is set to automatic. I don't know that he always comes to the top. Any help would be appreciated.
Hello
You can check these links:
http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=1003&EvtSrc=DHCP&lcid=1033I suggest you to contact your Internet service provider to verify the DHCP in your router settings.
-
System error category (102) event ID 1003
During the last two weeks, my system crashed repeatedly. It seems that the problem was a third newly installed, but after I installed an update for C++, it seemed that the problem has been resolved.
However, my system crashed again today, and I found the following error, I had seen before, too. Any suggestions on how to fix this?
Event type: error
Event source: System error
Event category: (102)
Event ID: 1003
Date: 19/01/2011
Time: 15:35:49Description:
100000d error code 1, parameter1 00000020, parameter2 00000002, parameter3 00000000, parameter4 a9b39520.0xD1 bug check code
http://msdn.Microsoft.com/en-us/library/ff560244 (v = VS. 85) .aspx
What wireless network adapter?
Hope this helps, Gerry Cornell
-
Windows 2003 server has been restarted with the event ID 1003
Hello
We have windows server 2003 with sp2 and gets recharged every day 2 times and get the blue screen also please find the error code received on the below Event Viewer:
Error code 00000019, parameter1 00000020, parameter 2 8a2fc0e0, 8a2fc258 parameter3, parameter4 8a2fc100.
Microsoft verification items, we found once article to fix the fix that is mentioned below:
===============================================================
Article (s): 2280732
Language: English
Platform: i386
Location: (http://hotfixv4.microsoft.com/Windows%20Server%202003/sp3/Fix333407/3790/free/421007_ENU_i386_zip.exe)
=========================================================================
could you please let us know because we can see the fix above is with sp3, but the server who has has question is having SP2 that we have tested in the test environment.
We can with the same fix to install on the server production or any other solution for this problem.
Please answer as a priority, since we have the issue on the neck.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
You need to ask the Forum server later here.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
error code 1003 and 1015 computer keeps freezing upwards
Hi, I'm on a computer Athlon 2000 + and Windows XP SP3. For these months, my computer kept freezing up and I can only reset it. It happens constantly and resets a half-dozen arrived on the internet, where I can get 5 minutes or 2 hours before it stops again. I've included a few events (see below) copied from the Clipboard. My Event Viewer is full of them, always the same two events. Seems to be something in the registry, but I really don't know enough to do something about it. Can you help me please?
Event type: WARNING
Event source: EvntAgnt
Event category: no
Event ID: 1015
Date: 2010-11-18
Duration: 03:07:46
User: n/a
Computer: ATHLON
Description:
TraceLevel parameter not found in the registry. Trace default level used is 32.Event type: WARNING
Event source: EvntAgnt
Event category: no
Event ID: 1003
Date: 2010-11-18
Duration: 03:07:46
User: n/a
Computer: ATHLON
Description:
TraceFileName parameter not found in the registry. Default trace file used is.Here is information on the events, but maybe it's not your only question... Start with that and then view the side of things:
The messages mean that components of the Simple Network Management Protocol (SNMP) are installed on your system, but have not been fully configured.
Here's the warning messages and no errors (Event Type: warning).
When SNMP tries to start with no details of the configuration, it tries to inform you the settings he needs are not in the registry where one would expect to find the information and he complains. When SNMP tries to start with no parameters, it displays messages similar to this:
Event type: WARNING
Event source: EvntAgnt
Event category: no
Event ID: 1003Description:
TraceFileName parameter not found in the registry. Default trace file used is.She is usually accompanied by an another warning message that looks like this:
Event type: WARNING
Event source: EvntAgnt
Event category: no
Event ID: 1015Description:
TraceLevel parameter not found in the registry. Trace default level used is 32.Using SNMP services in your environment? Most unique computer systems in a domestic environment don't use SNMP but sometimes it gets installed or activated by accident ot trying to solve another network or Internet related issue.
.
If you don't use SNMP, just uninstall it because it is a waste of CPU cycles otherwise productive. If you are using SNMP, you must configure it to have valid startup parameters.You will find Simple Network Management Protocol in apotheosis of Add/Remove Programs, add/remove components Windows, the option of management and monitoring tools, and then click details...
Uncheck SNMP (and the WMI component) If you are not using them and very well your way out and then reboot your system and check the event viewer.
Some warning in Event Viewer messages are excusable when the system boots place... as other services depend on each other to run. Continuous (same warnings) messages in the event viewer are annoying, if you hope that you would see only the White type 'i' of information messages when things are well experienced.
No messages in the event viewer should never defy reasonable explanation.
If your event (s) does not resemble those from above, maybe we should see what looks like your event (s).
Here is how to post an event to the event viewer in a message:
When you double-click on an event, it will open a window of properties with more information. On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.
When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.
If it is your desire, remove any personal information attached (such as user, computer).
To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), then reproduce your problem, then view only the events at the time of your problem.
Do, or do not. There is no test.
I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
Tecra S5 - restarts and errors
Dear all,
I have Toshiba Tecra S5 and I use XP Pro service Pack 2 of Toshiba Recovery disk. A few days ago, I get an error message and my laptop back running. It goes so far and I can find no reason for this, because everything seems to work fine. Here are the logs of events of some of the errors:
"
Event type: error
Event source: System error
Event category: (102)
Event ID: 1003
Date: 18/05/2008
Time: 20:32:12
User: n/a
Computer: RADO
Description:
Error code 00000019, parameter1 00000020, parameter 2 832438c 8, 832438e8 parameter3, parameter4 0a 040003.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6 d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 31 0000001
0020: 39 20 20 50 61 72 61 6 d 9 Param
0028: 65 74 65 72 73 20 30 30 00 very
0030: 30 30 30 30 32 30 2 20-000020 c.
0038: 38 33 32 34 33 38 63 38 832438c 8
0040: 2 C 20 38 33 32 34 33 38, 832438
0048:65 38 2 c 20 30 61 30 34 of e8, 0 a 04
0050: 30 30 30 33 0003
Event type: error
Event source: System error
Event category: (102)
Event ID: 1003
Date: 19/05/2008
Duration: 01:03:02
User: n/a
Computer: RADO
Description:
000000c error code 2, parameter1 00000007, parameter 2 00000cd 4, parameter3 02040001, parameter4 82b2c3a8.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6 d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 63 000000 c
0020: 32 20 20 50 61 72 61 6 d 2 Param
0028: 65 74 65 72 73 20 30 30 00 very
0030: 30 30 30 30 30 37 2 20 000007 C,.
0038: 30 30 30 30 30 63 64 34 00000cd 4
0040: 2 C 20 30 32 30 34 30 30, 020400
0048: 30 31 2 c 20 38 32 62 32 01, 82b 2
0050: 63 33 61 38 c3a8Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7000
Date: 19/05/2008
Duration: 01:02:50
User: n/a
Computer: RADO
Description:
Intel Active Management Technology System Status Service service failed to start due to the following error:
The system cannot find the specified file.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event type: error
Event source: System error
Event category: (102)
Event ID: 1003
Date: 20/05/2008
Time: 20:27:37
User: n/a
Computer: RADO
Description:
Error code 00000019, parameter1 00000020, parameter 2 82d 15610, 82d15de0 parameter3, parameter4 0afa3350.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6 d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 31 0000001
0020: 39 20 20 50 61 72 61 6 d 9 Param
0028: 65 74 65 72 73 20 30 30 00 very
0030: 30 30 30 30 32 30 2 20-000020 c.
0038: 38 32 64 31 35 36 31 30 82 d 15610
0040: 2 c 20 38 32 64 31 35 64, 82d15d
0048:65 30 2 c 20 30 61 66 61 e0, 0afa
0050: 33 33 35 30 3350Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7000
Date: 20/05/2008
Time: 20:27:42
User: n/a
Computer: RADO
Description:
Intel Active Management Technology System Status Service service failed to start due to the following error:
The system cannot find the specified file. "
Please can you me to log event which causes the reboot?Thank you in advance!
RADO
Hey Rado
> Can you clarify what you mean by getting the system to install after formatting the drive?
I think the Macdreamy means that you must use the original Toshiba Recovery CD to reinstall the system on your laptop.
The point is that this error could occur if some system files needed and indispensable are damage/deleted/changed.> the first time I have install my XP Toshiba no key was necessary, but I don't know about the second formatting and I have Vista key on the bottom of the laptop. Do you know how is the situation with the XP key in this case?
AFAIK the image of Toshiba (on the Toshiba Recovery CD) is already activated and you n t need no key to activation of the OS.
The key at the bottom of the device belongs to the image installed and it cannot be used with the second operating system of Windows XP!
If you want to use and install XP on this machine need you an original MS Windows XP CD with the right key!However, the recovery procedure;
Simply put the recovery CD in the CD drive / DVD-> recovery CD boot-> follow the instructions and shortly after, the new operating system with all Toshiba drivers and tools must be installed correctly.But note; As Macdreamy said that the data backup may be necessary because the recovery CD formats the entire HARD drive.
Good luck
-
Upgrading RAM on Satellite L30 (PSL33L)
I want to increase the RAM of this laptop, but is gone beyond 2 GB that are 1 gb + 1 gb 667 mHz computer will start normally and work as usuall, but after the computer turn blue screen and restarts. Currently, using XP Pro SP3 with the last bios v3.01. Where is the error Viewer: System error.
Error code 1000008e c0000005 parameter1, bf097509, parameter3, parameter4 00000000 a50d726c parameter 2.
Category: 102
Event ID: 1003
Data in bytes:
0000: 53 79 73 74 65 6 d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6, d, e Param
0028: 65 74 65 72 73 20 63 30 very c0
0030: 30 30 30 30 30 35 20 000005 2 c.
0038: 62 66 30 39 37 35 30 39 bf097509
0040: 2 c 20 61 35 30 64 37 32, a50d72
0048: 36 63 2 C 20 30 30 30 30 6 C, 0000
0050: 30 30 30 30 0000Data in word:
0000: 74737953 45206d 65 726f7272 72452020
0010: 20726f72 30303120 38303030 65646f63
0020: 50202065 617261 72657465 30632073 6 D
0030: 3530 39306662 39303537 30303030 202c
0040: 3561202 c 32376430 c 202 6336 30303030
0050: 30303030> I have the same problem of blue screen and freez problems after a new hard drive upgrade... If you have any id pls reply to my message.
Looks like the new HARD drive may be defective sectors
You should check the disk with Drive Fitness Test for example or another tool.S most BSOD are related to faulty RAM memory or HARD drive modules
-
The error Stop Windows 2003 Server (w / SP2)
In recent days, was to plant my remote server. The reports are the same and that contains the following information. I could really use some help.
Event type: errorEvent source: System errorEvent category: (102)Event ID: 1003Date: 04/01/2014Time: 09:37:44User: n/aComputer: WIXY1260-STREAMDescription:Error code 00008086, parameter1 00000000, 00000000, parameter3 00000000, parameter4 00000000 parameter 2.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.Data:0000: 53 79 73 74 65 6 d 20 45 System E0008: 72 72 6f 72 20 20 45 72 rror Er0010: 72 6f 72 20 63 6f 64 65 ror code0018: 20 30 30 30 30 38 30 38 00008080020: 36 20 20 50 61 72 61 6 d 6 Param0028: 65 74 65 72 73 20 30 30 00 very0030: 30 30 30 30 30 30 20 000000 2 c.0038: 30 30 30 30 30 30 30 30 000000000040: 2 C 20 30 30 30 30 30 30, 0000000048: 30 30 2 c 20 30 30 30 30 00, 00000050: 30 30 30 30 0000Andrew
Server questions should be asked here http://social.technet.microsoft.com/Forums/en-us/home
Please provide as much info as you have. The above is not really enough.
-
No icon network & no updates with errors
When I try it it alls disapires just and nothing happens?
(Windowx XP Pro 32-bit) (OEM Windows XP pro sp3 cd) computing personalized, I myself built about 6 years ago.
Was installing IE8 & all other updates 09/01/2011.
I've had Bitdefender total security 2010 & uninstalled upgrade to version 2011. While I had it I thought that I would do all the updates before I reinstalled it, which includded the IE8 & around 11 or 12 other updates. Day & IE8 updates has not and when I rebooted to try again I couldn't on the internet at all. I have noticed the icon in the network, (network connections icon) folder. I used my laptop I looked on microsofts site troubleshooting for the icon missing and all running ok except DCOM security check. Now I can get on internet but very limited and still no icon and no install or uninstall. He tells me the windows setup program is damaged or was not correct. my pc is very slow and buggy. I got a list of errors in the events I'll also post below. I just format and reload, but I have a lot of very important work here. I'm trying to fix it before I go buy another HARD drive and starting over. Here is the KB894543 of KB825826 & help section # s I've tried so far. I also started on the cd of win and did a chkdsk /r and still did not help. I also get this a lot: Win32: access denied... THX Scott
===============================================
When you search for available updates on the update site, you receive the 0x800A0046 error.
Step 1: Verify the DCOM security
- Click Start, click run, type Dcomcnfg, and then clickOK.
- Expand Component Services, and then expand computers.
- Right-click my computerand then click Properties.
- Click the COM security tab.
- Under access permissions, click Edit default.
- Check that the following accounts are listed:
================================================================
Event type: error
Event source: EventSystem
Event category: (50)
Event ID: 4609
Date: 18/01/2011
Time: 18:43
User: n/a
Computer: GYRO
Description:
Internal system of events from COM + has detected what a bad code back during his treatment.
HRESULT is 80070005 from line 44 of d:\comxp_sp3\com\com1x\src\events\tier1\eventsystemobj.cpp. Contact the Services de Support technique Microsoft to report this error.================================================================
Event type: error
Event source: COM +.
Event category: unknown
Event ID: 4689
Date: 18/01/2011
Time: 19:05:29
User: n/a
Computer: GYRO
Description:
The runtime environment has detected an inconsistency in its internal state. This indicates a potential instability in the process that might be caused by the custom components running in the application COM +, components that they use, or other factors. Error in f:\xpsp3\com\com1x\src\comsvcs\package\cpackage.cpp(1184), hr = 80070005: InitEventCollector failed=================================================================
Event type: error
Event source: Windows Search Service
Event category: Gatherer
Event ID: 3100
Date: 18/01/2011
Time: 18:59:52
User: n/a
Computer: GYRO
Description:
Failed to initialize the filter host process. Closing.Details:
Access is denied. (0x80070005)========================================================
Event type: error
Event source: VSS
Event category: no
Event ID: 8193
Date: 18/01/2011
Time: 18:42:06
User: n/a
Computer: GYRO
Description:
The volume shadow copy Service error: unexpected error calling routine CoCreateInstance. 0 x 80040206.=========================================================
Event type: error
Event source: SecurityCenter
Event category: no
Event ID: 1802
Date: 18/01/2011
Time: 18:41:56
User: n/a
Computer: GYRO
Description:
The Windows Security Center Service was unable to establish events WMI queries to monitor third party AntiVirus and firewall.============================================================
Event type: error
Event source: MSSHA
Event category: no
Event ID: 1003
Date: 18/01/2011
Time: 18:34:28
User: n/a
Computer: GYRO
Description:
The Windows Security Health Agent could not be initialized.
Failure code: 80070005.===============================================================
Event type: error
Event source: Userenv
Event category: no
Event ID: 1090
Date: 16/01/2011
Time: 20:59:10
User: NT AUTHORITY\SYSTEM
Computer: GYRO
Description:
Windows could not record the status of the session RSoP (resultant set of policy). An attempt to connect to WMI failed. More no check RSoP will be for this application of policy.===================================================================
Event type: error
Event source: Dhcp
Event category: no
Event ID: 1002
Date: 19/01/2011
Time: 12:40:41
User: n/a
Computer: GYRO
Description:
The address lease IP 192.168.1.102 for the network card with network address 000D61BFD2AA has been denied by the server DHCP 192.168.1.1 (the DHCP server sent a DHCPNACK message).=====================================================================
Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7023
Date: 19/01/2011
Time: 19:34:29
User: n/a
Computer: GYRO
Description:
IPv6 support Service ended with the following error:
The system cannot find the specified file.=================================================
System Restore work? If so, then use a created point restoration before the attempted update 09/01/2011.
The restore points created by Windows Update will be called Software Distribution 3.0.
If there are restore points, use the one created just before the restore point of Software Distribution 1/9.If the system restore does not work or there is no restore point created before the preceding, since you have the XP CD, you can try a repair Installation.
But, access denied errors, caused by inadequate security settings, can prevent the repair.
We can try to reset the security settings, but the paths showing the log event are strange, to say the least-d:\comxp_sp3\com\com1x\src\events\tier1\eventsystemobj.cpp
f:\xpsp3\com\com1x\src\comsvcs\package\cpackage.cppHow is the computer partitioned; is there more than one hard disk installed; more than one operating system installed?
Expert MowGreen Windows IT Pro - consumer safety
-
Get BSOD, Bad Pool Header with Mass Effect and Batman AA
The problem I have is that whenever I play Mass Effect or Batman Arkhum Asylum, they tend to crash randomly during the game with a BSOD saying Bad_Pool_Header. The games would be fine for awhile, then it would break any chance to this BSOD screen. I tried to figure if these 2 games is in conflict with something, but I'm having a hard time to do this. Those are the only 2 games that cause this problem. I can't understand why.
Here is the error:
Event type: error
Event source: System error
Event category: (102)
Event ID: 1003
Date: 20/01/2010
Time: 14:25:44
User: n/a
Computer: HOME-XPS3
Description:
Error code 00000019, parameter1 00000020, parameter 2 8885ae68, 8885ae88 parameter3, parameter4 0a 040028.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6 d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 31 0000001
0020: 39 20 20 50 61 72 61 6 d 9 Param
0028: 65 74 65 72 73 20 30 30 00 very
0030: 30 30 30 30 32 30 2 20-000020 c.
0038: 38 38 38 35 61 65 36 38 8885ae68
0040: 2 c 20 38 38 38 35 61 65, 8885ae
0048: 38 38 2 c 20 30 61 30 34 88, 0 a 04
0050: 30 30 32 38 0028I don't really know what that all means. Thanks in advance for your help.
My setup
Windows XP Pro
AMD Phenom II X 3 720
GeForce 9800GTX +.
4 GB OF DDR3 MEMORY
Blast its X - Fi XtremeGamerTry running memtest or other diagnostics hardware since in my experience, this error is usually caused by faulty RAM.
-
On screen error code Blue 0000009c, parameter1 00000001
original title: blue screen of death on windows xp pro sp2 2002
Sorry I duno how to write the problem... but I hope below the error obtained someone help me... Thank you
Event type: error
Event source: System error
Event category: (102)
Event ID: 1003
Date: 28/04/2011
Time: 20:00:18
User: n/a
Computer: JASON
Description:
Error code 0000009c, parameter1 00000001, parameter 2 8054d5f0, b6000000 parameter3, parameter4 00000181.For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6 d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 39 0000009
0020: 63 20 20 50 61 72 61 6 d Param c.
0028: 65 74 65 72 73 20 30 30 00 very
0030: 30 30 30 30 30 31 2 C 20 000001.
0038: 38 30 35 34 64 35 66 30 8054d5f0
0040: 2 c 20 62 36 30 30 30 30, b60000
0048: 30 30 2 c 20 30 30 30 30 00, 0000
0050: 30 31 38 31 0181
p.Hello.
This error code and the behavior you describe tells me you have a hardware problem with your machine. With time to amend the BSOD, I would say the problem is a problem of overheating. Take the machine to a service centre/repairman good reputation.
-
System shuts down randomly.
System shuts down randomly. Watched the Sytem log and found this. Event ID: 1003 category: 102. Error code 1000000a, 99e84008 parameter1, parameter2 00000002, parameter3 00000001, parameter4 8051f78f. No idea if it's the hardware or software associated with?
Hello
1 have you done with the hardware changes to your computer lately?
I think it's an IRQL not less than or equal stop error, it is usually a device driver that requires.
I suggest that you follow these steps and check to see if they help.
Step 1:
Disable the automatic restart in case of system error:
a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
b. use the arrows to choose to disable automatic reboot failure system to the Windows Advanced Options menu appears, and press ENTER.Step 2:
Although the error code cannot be bound, you can follow all the measures applicable from this article and see if the problem still occurs.
http://support.Microsoft.com/default.aspx?scid=kb;en-us;q314063
-
I get error (blue screen) system, laptop restarts automatically
OS: XP SP3
Recently, I reloaded the OS and downloaded/installed all the patches and SP3.
I installed all the drivers for audio/video/network/...etc that are provided by the manufacturer / intel...
I installed need or Speed SHIFT and when running the game, I get system error and the laptop retarts... error thi is only diaplyed running NFS... computer laptop configuration satisfyes the minimum system requirements to run the game.
Like event log below:
Source: System error
Category: 102
Event ID: 1003
Type: errorDescription:
Error code 1000007f, parameter1 00000008, ba340d70 parameter 2, parameter3 00000000, parameter4 00000000.Data: bytes
0000: 53 79 73 74 65 6 d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 37 1000007
0020: 66 20 20 50 61 72 61 6 d f Param
0028: 65 74 65 72 73 20 30 30 00 very
0030: 30 30 30 30 30 38 2 C 20 000008,.
0038: 62 61 33 34 30 64 37 30 ba340d70
0040: 2 C 20 30 30 30 30 30 30, 000000
0048: 30 30 2 c 20 30 30 30 30 00, 0000
0050: 30 30 30 30 0000First you need to set up your system (if it isn't already) to do not automatically restart on system failure and generate a crash dump file that can be analyzed to focus on the problem. Which will remove the maybe, perhaps, could be, probably a few pilot... ideas.
If you can make it fail when you want while playing your game, which should make things easier.
You are unlikely to find enough clues in case the viewer connects to understand what is happening.
Configure your system does not automatically restart on system failure (this is what he wants to do):
Right click my computer, properties, advanced, startup and recovery settings.
In the system failure section:
Put a check mark in the box "write an event to the system log.
Put a check mark in the box "send an administrative alert.
Uncheck 'automatically restart '.
In the Write debugging information section select:
Partial dump (64 KB)
Set the directory small dumpster:
%SystemRoot%\Minidump
Click OK, OK.
Restart your computer.
As Gerry C J Cornell says, you can post your dumps up to your SkyDrive and I (or someone else) will be pleased to hear, but that may not be necessary for to do you the following things. Well... I'll be happy to do so, I can't speak for everyone!
Now, follow these instructions... One day, maybe the "ask a question" of forums XP dialog box will ask these questions automatically when a new thread is started so I don't have to ask every time.Please provide additional information on your system:What is your system brand and model?Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..The afflicted system has a CD/DVD drive work?You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?Can you make the system crash when you wantThe next time your system crashes, provide more information on what you see.Here's a BSOD example showing information you provide:Send for the nose and the Red arrows (3 to 4 lines total).Send all * line STOP message since there are clues in the 4 parameters.If there is a name of the file listed in the STOP message, don't forget to include this information too.Ignore the boring text unless it seems important to you. We know what a BSOD looks like, we need to know what your BSOD looks like.Now provide more information about your system and data against more recent accidents.Click Start, run and enter in the box:Msinfo32Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.This will minimize back Q & A and eliminate guesswork.Download BlueScreenView here:Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files. Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt. Open BSOD.txt with a text editor, copy the text and paste it in your next reply.Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:==================================================Dump file: Mini062110 - 01.dmpCrash time: 21/06/2010-11:51:31Bug Check String: MANUALLY_INITIATED_CRASHBug check code: 0x000000e2Parameter 1: 0x00000000Parameter 2: 0x00000000Parameter 3: 0x00000000Parameter 4: 0x00000000Caused by the driver: i8042prt.sysCaused by the address: i8042prt.sys + 27fbDescription of the file: i8042 Port driverProduct name: Microsoft® Windows® Operating SystemCompany: Microsoft CorporationFile version: 5.1.2600.5512 (xpsp.080413 - 2108)Processor: 32-bitComputer name:Full path: C:\WINDOWS\minidump\Mini062110-01.dmp==================================================Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).Do, or do not. There is no test.
I decided to implement the points for a new puppy instead of a pony!
-
Where can you get support for 64-bit Win 2003 Server? Event ID - 1001 error checking and
Event ID = 1003 system error. I can't find any help with my codes. Does anyone know where I can get help with this?Event ID 1001
Error checking
code 0x0000003b (0x00000000C00000005, 0xfffffadf29209ec4, 0xfffffadf25367e50, ox0000000000000000)
Event ID = 1003 system error
000000000000003b, parameter1 00000000c 0000005, fffffadf29208ec4, fffffadf25367e50, parameter3, parameter4 0000000000000000 parameter 2
Windows Server 2003: http://technet.microsoft.com/en-gb/windowsserver/bb512919
Windows Server-Forum: http://social.technet.microsoft.com/Forums/en-US/category/windowsserver
Bug Check information from the debugging tools:
Debugging tools for Windows Bug Check 0x3B: SYSTEM_SERVICE_EXCEPTION
The SYSTEM_SERVICE_EXCEPTION bug control has a value of 0x0000003B. This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
Parameters
The following settings are displayed on the blue screen.
Parameter Description 1 The exception that caused the bug control 2 The address of the exception record for the exception that caused the bug control 3 The address of the context record to the exception that caused the bug control 4 0 Cause
This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.
© 2009 Microsoft Corporation
Send your comments to this topic
Debugging tools for Windows
January 17, 2009Build machine: CAPEBUILD -
Hello
I am trying to activate a Windows 8 Pro machine on the network of our field.In preparation to win 8, I had already discovered the obligation to upgrade VAMT 2 to 3 and I downloaded the ADK and installed 3 VAMT (v6.2.9200.0) on the necessary 2008 R2 server with SQL 2008.It's a simple process and the service of the VAMT tool is running. I have installed all required keys, whose VAMT is quite satisfied.I also installed KB2757817, which is required when you run VAMT 3 tool on 2008 R2.I run slmgr /dlv to verify that the server is functioning properly and that he got an active response.VAMT found many existing PC to Windows 7 and Office 14, which have been established against the keys KMS we received an envelope. That tells me that the KMS service is running with happiness.
To make sure I looked at the Server Manager event logs. KMS watch log many event 12290, where the server is conclusion machines on the network, however the PC Windows 8 in these events will return an 0xC004F042 error code in their data, but Windows 7 PCs return 0x0 in their data.The VAMT tool on the server log shows an error event 1000 VAMT Runtime.To do this, the data are:Error when update products: System.Runtime.InteropServices.COMException (0x800706BA): the RPC server is unavailable. (Exception from HRESULT: 0x800706BA) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal (Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementScope.InitializeGuts (Object o) at System.Management.ManagementScope.Initialize () at System.Management.ManagementScope.Connect () at Microsoft.Licensing.VolumeActivation.WmiConnection.Connect () at Microsoft.Licensing.VolumeActivation.UpdateProductsProvider.RefreshMachineGenericInformation () at Microsoft.Licensing.VolumeActivation.UpdateProductsProvider.UpdateProducts () on the machine using credentialsOn the pc of Windows 8, I ran the slmgr /dlv, that tells me as the ends of product key: J8CK4, however my KMS - keys on the ends of the server: FKQW7. This report also says that I need to run slmgr /ato to activate the machine? (Isn't this defeat the point of a KMS server if each machine must be activated in the personalized decoration?)The KMS on the PC log is empty. The application log howerver, contains the following: -.Information event ID 12288 - the client sent an activation request. (The data for this show the IP address of the server VAMT, so his attempts to connect with the right server.)Information event ID 1003 - software protection service has completed to verify the license status.ID 8198 error event - Activation of licenses (slui.exe) failed with the following error code: hr = 0xC004F074.As our network has its own firewall, I have disabled the firewall on all internal machines on the field so there should not be any restrictions on network services or protocols.The RPC service is running on the server and the computer of Windows 8.As you can see, this becomes a bit frustrating, especially as the server of the VAMT tool works very well with all Windows 7 and 2008 machines on the field.I looked on the internet for all existing media or documents in this regard, but most point to upgrade to the 6.2.9200 version of the VAMT tool, which I am already running.You may be able to offer any assistance would be much appreciated.Thank youBarry.TammyGPV,
I suggest you to report your query in the TechNet forums to improve the assistance on server problems. Here is the link: http://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver&filter=alltypes&sort=lastpostdesc
Hope this information helps.
Maybe you are looking for
-
Why can't I change my fonts in safari 10.0 sizes?
-
Bing Bar at the top of the Web page
When I updated to the latest version of firefox, at the top of most Web pages, excluding the pages like google and youtube, I'll get a "Bing Search" at the top. So, it's boring, but also if you go over it, he brought, not Bing. So, I thought it was m
-
AC100 - changing the keyboard language
Hello, I bought an ac100 in Europe and I'm now at the Japan.For many reasons, I must be able to write in Japanese, but I can not know how to do?I Googled it and found an old thread about this on this forum, but it is cleared.Can someone reexplain how
-
Hello I use a PCIe-6320, I'm voting of the ADC, in a very simple while loop. The time per iteration of the while loop is about 9 milliseconds. While the time interation of the while loop without reading the DAC is 10 microseconds. That's the differe
-
RealPlayer is compatible with Android 2.1 devices?
RealPlayer is compatible with Android 2.1 devices?