Event in CFC OSMF 2.0 errors

Similar Questions

• My Administration event log is 8000 + and new errors every day. Windows Explorer stops responding, how can I stop this?

  OT: my Administration event log is 8000 + and new errors every day. How can I stop this?

  My ACER laptop running VISTA family premium has many errors I do not understand why and don't know how to stop.

  Is how important it? Is this normal? Should I post each event with details to see if it can be interrupted?

  For example my lap top works generally OK but Explorer windows (explorer.exe) crashes with a message that it fails and restarts. The error code and events are

  Error 01/03/11 10:04:22 Application Error 1000 (100)

  Application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, module MSVCR80.dll, version 8.0.50727.4053, time stamp 0x4a594c79, exception code 0xc000000d, offset error 0x00008aa0, process id 0 x 624, failed failed application start 0x01cbaad15a2d1273.

  Thanks if you can help

  Hi Tricsim,

  Since when are you facing this problem?

  There could be several causes for this problem; I suggest you try the following steps to correct the problem:

  Method 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3: You can follow the steps described in the article below

  Error message when you log on to Windows Vista: "Windows Explorer has stopped working".

  http://support.Microsoft.com/kb/937093

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Premiere Pro debug event - Premiere Pro has encountered an error.  [..-.. \src\TickTime.cpp-290 button] continue alone. After you click Next message: Sorry, a serious error has occurred which requires Adobe Premiere Pro stop. We will try to save yo

  Premiere Pro debug event - Premiere Pro has encountered an error.  [..-.. \src\TickTime.cpp-290 button] continue alone. After you click Next message: Sorry, a serious error has occurred which requires Adobe Premiere Pro stop. We will try to save your current project.  Button OK I don t open my project - please help me! My project of losing many hours of work of panic!

  Hello

  Follow this: FAQ: how to fix projects that get an error "TickTime.cpp - 290" after opening a project.

  Thank you

  Regalo

• Event ID 11,51, 57 disc error

  Hello

  I installed new seagate drive HARD for Windows Server Backup (full backup).  During the backup, I get errors in the event log and backup failed following.
  Event ID: 11 error - no disc \device\harddisk1\dr8
  Event ID: 51 - an error was detected on device \device\harddisk\dr1 during a paging operation
  Event ID: 57 - the system failed to flush data to the transaction log corruption may occur.
  Backup of the full server backup was successful.  This disc has become defective, so we used the new 1 TB external HARD drive.  This error occurring, replaced after new disk external hard drive USB 3.0.
  Help, please
  Thanks & best regards,
  Valentine's day

  Hello

  I suggest you to send your query to this link for assistance.
  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Task Scheduler/Event Viewer: "MMC has detected an error in a snap...". »

  Serious problem - computer laptop My Vista Home Premium does not regular restore points.   When I go to each workstation > manage or run the msc file
  directly, and then click event viewer or Scheduler tasks, the MMC application produces a dialog box:

  "MMC has detected an error with a snap and it will discharge."

  Is there a way to repair Task Scheduler/Event Viewer fails?

  sfc/scannow did not fix it.

  A failure message from Task Scheduler is located here:
  http://S266.Photobucket.com/albums/ii248/movrshakr/webimages/?action=view¤t=TaskScheduler.jpg

  Error messages when you try to close are shown as:

  at System.RuntimeTypeHandle.CreateInstance (RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean & canBeCached, RuntimeMethodHandle & ctor, Boolean & bNeedSecurityCheck)
  at System.RuntimeType.CreateInstanceSlow (Boolean publicOnly, Boolean fillCache)
  at System.RuntimeType.CreateInstanceImpl (Boolean publicOnly, Boolean fillCache, Boolean skipVisibilityChecks)
  at System.Activator.CreateInstance (Type type, nonPublic Boolean)
  at Microsoft.ManagementConsole.FormView.InternalInitialize)
  at Microsoft.ManagementConsole.View.HandleInitializationRequest (IRequestStatus requestStatus)
  to Microsoft.ManagementConsole.View.ProcessRequest (request request)
  to Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest (request request)
  to Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest (request request)
  at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest (IMessageClient messageClient, RequestInfo requestInfo)
  at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest)
  at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer (SimpleOperationCallback callback)

  Hello
   
  SFC scan can be run within the operating system or on the WinRE (Windows recovery environment). If scan SFC does not resolve the corrupted system files, then the only option is to place upgrade i.e. repair using Vista DVD installation.
   
  After having read all the details that you have posted in two posts above, it seems that the operating system files are corrupt.
  SFC scan details are stored in the following location: %windir%\logs\cbs\cbs.log > sfcdetails.txt
  The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer.
   
  To make leveling up, follow these steps.
  1. close all applications and restart the computer.
  2. Insert the Windows Vista DVD in the DVD drive of the computer.
  3. in the settings window, click install now.
  Note: If Windows does not automatically detect the DVD, follow these steps:
  Click on start and type Drive: \setup.exe in the box to start the search.
  Note: The placeholder drive is the drive letter of the computer's DVD.
  4. in the list programs, click Setup.exe.
  5. in the settings window, click install now.
  6. click on connect to get the latest updates for installation (recommended).
  7. type the CD key if you are prompted to do so.
  8. click Yes to accept the Microsoft software license agreement.
  9. on which type of installation do you want? screen, click upgrade.
  10. when the installation is complete, restart your computer and try again to install updates.

  Note: Run a repair installation will not damage files and applications that are currently installed on your computer.

  Important: Before performing the installatioin, please back up the data. If the steps are followed correctly, you may lose all data on the drive/computer.
   
  Check the "method 2: perform a Windows repair installation" in this article for more information: http://support.microsoft.com/default.aspx/kb/958044
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Vista symptom-was unable to connect-event log unav... - error-could not load the dll of the firewall intall cd

  Hello, once again!-the permanent problem's for a while when the system starts at length made a chkdsc solve problem of security and started a journal rewrote the security set of default computer files (it happened before I could do anything and I have prior devulcanization, but is not this time), then narrowed office and failure to connect to a service windows appeared - are looking for Event Viewer , he is too error-unavailable check running - and the same.etc wall of fire etc. I ran the chkdsk again and I tried clean boot, reinstall os from cd to find any DLLs cannot be read, all with no success. The system configuration was last place, I was in (memory and forgotten the reason) but placed in this area has been the recommendation at the time to fix something and rebooted to undo changes and that's where newspapers changed. My user profile is also something questionable-. Fixed UAC from the Office to the previous, but the sidebar does not work. I'm sure there is a way to get back to that, but I can not see where or how--to help. (this just before a full backup has been in do so) sys restore is never out anything here. I don't have a picture from earlier and that you would like to know the number of license/registration even if other images uploaded to a new os and numbers is a question they compete somehow.eg P2V on a different HARD drive. Thank you. Oh... a program compatible for xp had red warnings about its pilots and it was loaded and uninstalled just before all this. (MSI tv tuner USB pvr)

  Hi 1 year perateth.

  In order to solve the problem, I would suggest that you backup the data present on the system then format the hard drive and reinstall Windows Vista.

  Note: In a new installation, existing data on your computer are deleted. These data include data personal, settings, information about the hardware and software drivers. After installing the operating system, you must also reinstall all programs. Make sure that you back up data personal disks or other external storage devices before you perform a new installation.

  You can check the following items to install Windows Vista.

  Installation and reinstallation of Windows Vista

  Formatting disks and drives

  Hope this information is useful.

• Computer freezes and my event log is suggesting a WMI error

  I checked the forums of these resources and tried a few things, but I can't get my laptop to stop freezing on me. My event log indicates a WMI error.  And try a restore of the system in safe mode uses an error code of «the instruction at 0x76042f91 referenced memory at 0x75d90640.» The memory could not be written. ", as well as a suggestion to run chkdsk, which does not work and I am logged into my account."  Seems that none of my apps don't introduce, even let the program inactive windows five minutes freezes me on the pc.  Sorta stuck.  Usually I take my Windows cd and rub the pc and start over this.  But the pc didn't come with a license diskette.  So, what should I do?

  Hello

  ·        What are the steps that you have tried to resolve your problem?

  Method 1:

  I suggest you to start in safe mode and then do a clean boot and check which process is causing this issue.

  Follow the steps mentioned below.

  Step 1:

  Follow the step to log in safe mode.

  a. restart the computer and keep tapping F8 until you reach the boot options.

  b. Select safe mode from the list and press to enter.

  Step 2:

  I you suggest to perform a clean boot and then try to use Windows live photo gallery and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 2:

  You can do a restore of the system from the desktop.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 3:

  I suggest you follow the steps mentioned in the link given below to run the check disk and scan SFC (System File Checker).

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/701fbca2-98C3-49F2-99f9-8f1b6c4e233a

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VC die randomly and the windows event viewer will display the following error message

  Hello

  in the last time we are experience a lot of vc crashes and the windows event viewer shows the following error:

  ORA-01483: invalid length for the DATE or NUMBER variable binding

  "is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».

  ORA] ORA-12899: value too large for column 'VPXADMIN '. "" "" VPX_VM '. "" IP_ADDRESS"(real: 40, maximum: 16)

  "is returned when you run the SQL" UPDATE VPX_VM SET TOOLS_STATUS =?, TOOLS_VERSION =?, GUEST_OS =?, GUEST_FAMILY =?, GUEST_STATE =?, DNS_NAME =?, IP_ADDRESS =? WHERE ID =? ».

  There is no update or modify the software to vmware esx/vc or oracle.

  Anyone has the same problem or have a solution/fix for this problem?

  Environment:

  Oracle 10.2.0.3 DB

  Virtual Center 2.5 U3

  VMware ESX cluster

  Vmware ESX 3.5 Server Patchlevel 1 x 143128

  3 x Vmware ESX 3.5 Server Patchlevel 123630

  This is a known bug in oracle - 10.2.0.3. Upgrade to 10.2.0.4 or install the Oracle patches 6085625 and 6452485 (as far as I remember you just one of them, but for the moment, I can't say that one)

  --

  There are 10 types of people. Those who understand binary and the rest. And those who understand the gray code.

• on change of value event I'm shooting adf Faces error message but its getting recorded during the click on save

  Hi Experts,

  JDEV 11.1.1.7.0

  On valueChangeEvent I throw adfFacesErrorMessage but its economy during the click on save.

  Because I can't do validation in my OE. So I can use validator instead of valuechange evnt. ? While it will not allow something to save.

  autoSubmit = "true" validator = "#{backingBeanScope.myBean.checkValidation}" >

  On valueChangeEvent I throw adfFacesErrorMessage but its economy during the click on save.

  Message is just to what is expected.

  So can I use instead of evnt valuechange validator.

  Yes, you must use the validator to implement validation

  Dario

• Satellite L755-S5368 - PrintService error event ID 372

  I have a laptop Toshiba Satellite L755-S5368 with Windows 7 64 b. I have a printer HP 1020 LaserJet printer with the latest version of the software HP lj1020-HB-pnp-win64 - .exe I can find at HP. The printer works fine, but every time I have to print something that an error message is recorded in the event viewer.

  I googled but found nothing that corresponds to what I mean. Everything I saw on goolge the printer would not print, but mine print very well.

  Does anyone know how to get the event viewer to stop recording the code whenever I feel to the printer HP laserjet 1020?

  Event ID of Source-PrintService-372 error level

  Microsoft Word - 2012-2, owned by the YYY, document cannot print on a printer HP LaswerJest 1020. Try printing the document again, or restart the print spooler.

  I get this every time I print to the printer laserjet 1020 with Acrobat, Word, Excel, Notepad, etc. As I said, it prints well, but I want to get rid of the error code stored whenever I print.

  I posted this to two sevenforms more HP support forums, I didn't get a response from each site.

  The error message says something about
  > Try printing the document again, or restart the print spooler

  So, try this workaround:
  Stop the services.msc print spooler service.
  Delete the contents of the C:\Windows\System32\spool\printers folder.
  Restart the services.msc print spooler service.

  Good luck

• error message application failed because its side by side configuration is incorrect / see appl event log... whats that? HELPPP/also win update code Error 8000FFFF

  im going to throw this laptop out the window, my child wants to play wizard101 but it does not reason to the message "application must have the configuration side next is false and to see applicationevent log... #1 What is side to side and how to solve them, as well as the appl event log, how can I fix Error 8000FFFF when I try to update. I have vista, I HATE IT love XP HELPP

  Hi armymom914

  Welcome to the Microsoft Vista answers Forum!

  This problem occurs if Microsoft Visual C++ is curropt on your computer, so I suggest measures is to uninstall Visual C++ 2005 and reinstall it back. Steps to uninstall and reinstall the program.

  1. click on start

  2. Select Control Panel

  3. Select programs and features

  4 locate Microsoft Visual C++ 2005 in the list of programs

  5. Click to select the program and select uninstall

  Here is the link to reinstall the program: Microsoft Visual C++ 2005 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft.VC80.CRT error in Event Viewer

  When checking through the event viewer, I noticed a few errors. This one for the VC80. CRT is shown repeatedly. I'm not sure what may be the cause when it was recorded. I wonder if some missing critical updates can be a cause of those who have been downloaded and installed. They are 2656368, 2656369, 2656370. In fact I think that errors can be the result of a webcam software that has been installed and did not work properly. There are a bunch of sidebyside errors and all other Referances one webcam program.

  Did you ever have a password?

  As a user or administrative password?

  You know the password?

  You should be able to right click the program and select Properties, then select the Security tab, under permissions choose Add, the next box choose Advanced, choose Find now to locate the service you want to add and ok your way out, apply at the end, and then click ok.

  If above does not work to clear the error, you will need to uninstall the software and reinstall.

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• 674SideBySide errors in the observer of events in 6 months

  In the windows event viewer, he recorded 674 sidebyside errors at the time of this post, and this computer is less than a year.  I got a lot of error messages and crashes over the last month or two, so I'll try to track down each only one error at a time, starting with those who have higher numbers.  All errors seem to be linked to the microsoft works, Installer, but I never touch microsoft works, and I can't find something that has listed as a start-up program.

  That's what said event viewer on each of them.

  Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\WksWP.exe." Load Assembly msadctls, processorArchitecture = "x 86", type = "win32", version = "1.0.1801.0" was not found. Please use sxstrace.exe for detailed diagnosis.

  Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\wksss.exe." Load Assembly msadctls, processorArchitecture = "x 86", type = "win32", version = "1.0.1801.0" was not found. Please use sxstrace.exe for detailed diagnosis.

  Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\wksdb.exe." Load Assembly msadctls, processorArchitecture = "x 86", type = "win32", version = "1.0.1801.0" was not found. Please use sxstrace.exe for detailed diagnosis.

  Activation context generation failed for "C:\Windows\Installer\{67E03279-F703-408F-B4BF-46B5FC8D70CD}\WksCal.exe." Load Assembly msadctls, processorArchitecture = "x 86", type = "win32", version = "1.0.1801.0" was not found. Please use sxstrace.exe for detailed diagnosis.

  
  

  Its just these four, more and more, hundreds of times.

  
  

  Hello

  Open the prompt with administrator rights, and run the following command:

  SxsTrace Trace - logfile:SxsTrace.etl

  Now run the program that is causing the message. Back at the cmd prompt, press ENTER to generate the SxsTrace.etl. Now use the command to generate a text below in the format of output file.

  sxstrace Parse - logfile:SxSTrace.etl - outfile:SxSTrace.txt
   
  Through the generated text file should provide details on each of the loaded modules and links.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/