Event subtle problem

Similar Questions

• To help, very simple event button problem, does not.

  Hi guys,.

  Very strange problem. Only when I "to highlight execution", it works. otherwise, it does not.

  I just click on the 'next page' button and go to the next page on the control of 'tab '.  What I am

  do wrong here?  I'm using LabVIEW 9.0f3, Windows 7.

  Thank you very much!

  Weiyuan

  Why do you use the mouse to the bottom of the event?  I have a feeling that you have essentially a race condition between the user making a MouseDown on the button and the execution of the event.  Because the event fires immediately, it occurs when the user still has the key pressed down and in the context of this tab page.  So does not change the tab and the button will pop up.

  Use a change event of value for the button operation of the button to lock when released and move the terminal of the button inside the case of the button value change event.  Then, you can get rid of the writing, a fake to the local variable and thus eliminate the flat sequence structure.

• event BEX problem

  I recently installed suite developer Oracle 10 g form.
  I created a form (file .fmb) and I am able to compile successfully.
  But when I try to use the "Run in the form" button it gives me below error
  Signature of the problem:
  Problem event name: BEX
  Application name: iexplore.exe
  Application version: 9.0.8112.16490
  Application timestamp: 51955cca
  Fault Module name: jvm.dll
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 42527311
  Exception offset: 000bc228
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.4
  Locale ID: 1033
  Information additional 1:3597
  More information 2: 3597c31010c86d2765350bffe3a6632f
  3 more information: 7 to 20
  Additional information 4: 7a20225b263442a76492b7c3028145b2
  Kind regards
  Satya

  Hi Satya,

  You can ask your question in the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/home

  Thank you.

• Svchost.exe_EventSystem event BEX64 problem

  I have rebuilt entirely twice because of this.  At least this time it seems to occur when you install a Brother printer.  I saw the "related thread", but everything which was said was "network card drivers have been corrupted.  OK, but what I do about it?  The problem occurs because I couldn't run most applications.  Could not run IE or AIM.  After restoring to before the installation of the printer, I managed to capture the error message and get most of the applications that are running again, but I suspect that it's temporary.
  COM + a event system stopped working
  Prob BEX64 event
  Appl svchost.exe_EventSystem
  Version 6.0.6001.18000
  Error module netprofm.dll_unloaded
  The printer site amenities was when it happened this time, but the earlier incident was for a different etiology, I suppose, since the printer was working for a few months.
  I have a HP Pavilion a6700f, Vista 64

  Hello Dakeller99,

  Thank you for posting.  It seems some of your files may have been corrupted or altered.  You can fix this by using system File Checker to analyze and repair the.  I've included the steps below to make a SFC.  Let try this and see if it will fix the problem.

  Please let me know if this helps you.

  The tool File Checker system to determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start
     Collapse this includes this image

     and then type cmd in the box start the search .

  2. Right-click cmd in the programs list and then click run as administrator.
     Collapse this includes this image

     If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. At prompt command, the following line, and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool. Other troubleshooting methods, such as the use of the tool file system, the System Restore tool checker cannot solve the problem. If they do not resolve the problem, and the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time.

  The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start
     Collapse this includes this image

     type system restore in the Search box, and then click System Restore in the programs list.

  Collapse this includes this image

  If you are prompted for an administrator password or a confirmation, type your password or click continue.

• In the System Restore dialog box, click choose a different restore point, and then click Next.
• In the list of restore points, click a restore point created before you started having the problem, and then click Next.
• Click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cisco integrated event handler problem

  Hello Experts,

  I took the following sample EEM

  https://learningnetwork.Cisco.com/blogs/network-Sheriff/2009/06/19/writing-your-first-EEM-applet

  The intention is to send a notification to an email address on a network problem. I modified it bit as illustration. You will see that there are various show commands.

  Can someone show me please how to send show rather commands simply by adding them to the directory called "server_unreachable"?

  TechWiseTV4506 (config) #eve

  (_email_server 172.16.1.44) NT Manager environment<-my post="" cast="">

  TechWiseTV4506 (config) #event Manager environment _email_to [email protected] / * /

  TechWiseTV4506 (config) #event Manager environment _email_from [email protected] / * /

  Event Manager applet email_server_unreachable

  Event track 10 down state

  message from syslog to action 1.0 "Houston we have a problem. Ping failed, inaccessible Server! »

  command action 1.1 cli 'enable '.

  Action 1.2 cli command "del/force flash: server_unreachable.

  action 1.3 cli command "display the clock | Add server_unreachable.

  action 1.4 cli command "show ip arp 172.16.1.55 | Add server_unreachable.

  action 1.5 cli command "show ip route 172.16.1.55 | Add server_unreachable.

  action 1.6 cli command "show interface FastEthernet0/1/1 | Add server_unreachable.

  action 1.7 cli command "flash: server_unreachable more»

  Action 1.8 mail server "$_email_server" to "$_email_to" of "$_email_from" subject "inaccessible server: ICMP-echo has no" body "$_cli_result»

  Action 1.9 msg syslog "Server unavailable alert has been sent to the mail server!

  See you soon

  Carlton

  This cmdlet will actually results by e-mail.  However, in order to get all of the whole output, it uses the file server_unreachable as a buffer from the accumulator.  This file could be deleted as an action 2.0:

  Action 2.0 cli command "remove/force flash: server_unreachable.

  But it is already there in action 1.2, so it is not really necessary.

  What will happen, this is the applet will be more the file to collect all of the production.  This aggregate output is stored in the variable of _cli_result $.  The result is that the body of your email will contain the result of the consolidated order.

• Event Logger problem

  During activation of my recorder of events on windows 7 I get the error MMC cannot create the snap

  There is no error code, so I can not give more info on the problem

  any help would be appreciated

  Jim Shepherd

  Try this article.

• Trigger event handler problem

  Hello
  I am facing a problem in the event handler, I'm pre process handler.bellow event is the steps that I followed and did all the steps correctly, but the event handler is not triggered.
  
  the steps that I follow is
  (1) develop a java class in which I will put middle name if the user does not have a middle name in the form of IOM in the CREATE operation.
  
  import java.io.Serializable;
  import java.util.HashMap;
  
  import com.thortech.util.logging.Logger;
  Import oracle.iam.platform.context.ContextAware;
  Import oracle.iam.platform.kernel.spi.PreProcessHandler;
  Import oracle.iam.platform.kernel.vo.AbstractGenericOrchestration;
  Import oracle.iam.platform.kernel.vo.BulkEventResult;
  Import oracle.iam.platform.kernel.vo.BulkOrchestration;
  Import oracle.iam.platform.kernel.vo.EventResult;
  Import oracle.iam.platform.kernel.vo.Orchestration;
  
  * / public class NamePreProcessEventHandlers implements PreProcessHandler {*}
  
  private logger = Logger.getLogger Logger ("logger name Handel");
  
  private String methodName ="";
  public NamePreProcessEventHandlers()
  *{*
  debug ("invoking NamePreProcessEventHandlers");
  *}*
  *@Override*
  public cancel Boolean (long arg0, arg1 is long,
  * AbstractGenericOrchestration arg2) {*}
  * / / TODO self-generated stub method *.
  Returns false;
  *}*
  
  *@Override*
  public void offset (long arg0, arg1 is long,
  * AbstractGenericOrchestration arg2) {*}
  * / / TODO self-generated stub method *.
  
  *}*
  
  * / / Write your implementation.*
  * Public EventResult run (long processId, long eventId, orchestration of the Orchestration) {*}
  * / / TODO self-generated stub method *.
  
  
  this.methodName = "execute";
  * / / This method get the parameters of the request of IOM form *.
  HashMap parameters = orchestration.getParameters ();
  
  debug ("settings" + settings);
  String operation = orchestration.getOperation ();
  debug ("operation process pre" + operation);
  
  If (operation! = null & & operation.equalsIgnoreCase ("create"))
  *{*
  String firstName = getParamaterValue (settings, "First name")
  If (firstName! = null & &! firstName.trim () .isEmpty ())
  *{*
  If (! parameters.containsKey ("Middle Name"))
  *{*
  orchestration.addParameter ("Name", firstName.substring (0,1));
  *}*
  *}*
  
  *}*
  return new EventResult();
  *}*
  
  *@Override*
  * Public BulkEventResult run (long arg0, long arg1, arg2 BulkOrchestration) {*}
  * / / TODO self-generated stub method *.
  Returns a null value.
  *}*
  
  *@Override*
  * public Sub initialize (HashMap arg0) {*}
  * / / TODO self-generated stub method *.
  
  *}*
  
  */***
  The value of request parameters obtaining *.
  **/*
  private String getParamaterValue (parameters HashMap,
  * String key) {*}
  String value = (parameters.get (key) instanceof ContextAware)
  *? (String) ((ContextAware) parameters.get (key)) .getObjectValue () *.
  *: (String) parameters.get (key); *
  Returns the value;
  *}*
  
  private void debug (String message)
  *{*
  Logger.Debug (this.) GetClass(). "GetName() +": "+ methodName +": "+ message);
  *}*
  *}*
  
  (2) create a jar named NamePreProcessEventHandlers.jar file and paste it into the LIB directory.
  
  (3) develpo a config to custom handler file as follows
  
  * < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" > *.
  "< * class =" test.eventhandlers.NamePreProcessEventHandlers action-Manager' entity-type = 'User' operation = "CREATE" name = "NamePreProcessEventHandlers" Stadium = "preprocess" order = "FIRST" sync = "TRUE" / >. *
  * < / eventhandlers > *.
  
  (4) create a plugin.xml file
  
  * < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" > *.
  "< * class =" test.eventhandlers.NamePreProcessEventHandlers action-Manager' entity-type = 'User' operation = "CREATE" name = "NamePreProcessEventHandlers" Stadium = "preprocess" order = "FIRST" sync = "TRUE" / >. *
  * < / eventhandlers > *.
  (5) make an Eventhandler of the zip file in which I placed the plugin.xml and lNamePreProcessEventHandlers.jar
  (6) save the plugin file to the server of the IOM
  (7) import of the event custom in the MDS.
  (8) clear the cache and restart the server of the IOM.
  
  (9) then create user page in free service, but the event handler is not triggered.
  
  Please help as I am with IOM 11gr2.was I miss some steps or above process is sufficient.
  
  Thank you and regars
  $

  All looks good, but your plugin.xml is not correct.

  Go to the format below and try again.

  
  
  
  
  
  

• Bitmap Event Listener problem :(

  Hey,.

  I met a problem of bitmap to seal my image in my project.

  Because event listeners do not work on images bitmap, I have trouble on what to do next if I can use on my image event listeners.

  Main class - section that adds the image to the class:

  
  
  
  
  
  
  var playImage:Bitmap = new Assets.play();
  
  
  
  
  
  
  playImage.x = 190;
  
  
  
  
  
  
  playImage.y = 165;
  
  
  
  
  
  
  playImage.name = "play";
  
  
  
  
  
  
  addChild(playImage);
  
  
  
  
  
  
  
  
  
  
  playImage.addEventListener(MouseEvent.CLICK, playClick);
  
  
  
  
  
  
  playImage.addEventListener(MouseEvent.ROLL_OVER, playRollOver);
  
  
  
  
  
  
  playImage.addEventListener(MouseEvent.ROLL_OVER, moregamesRollOut, false, 0, true);
  
  // ^^ Those EventListeners don't function because the image is Bitmap and it won't allow me to add the photo as a MovieClip 
  
  

  Asset class - how I integrated the image in the class:

  
  
  
  
  [Embed(source="../images/play.png")]
  
  
  
  
  public static var play:Class;
  
  
  

  How do you do that for event listeners is working on my embedded image?

  I work with pure as3 in Flash Builder.

  Thank you

  McbainGames11

  I do not work in Flash Builder, but...

  I usually create a Sprite, which adds to the scene and then add the bitmap to the sprite. For example:

  var playImageHolder:Sprite = new Sprite();

  addChild (playImageHolder);

  var playImage:Bitmap = new Assets.play ();

  playImageHolder.addChild (playImage);

  playImageHolder.x = 190;

  playImageHolder.y = 165;

  etc...

• Events and problem of nested clips

  Hello

  I'm having the following problem with this navigation that I build. I am building a 3 tear to the bottom of the navigation, where each submenu button is placed inside the button. My buttons are actually just movieclips, so I nested movieclips structured something like this:

  Button_1

  -> Button_1_1

  -> Button_1_2

  -> Button_1_2_1

  -> Button_1_2_2

  -> Button_1_3

  Button_2

  Button_3

  Each of the buttons has their own class with its listenerens inside events. What is happening now is that when I click for example on Button_1_2_1, I get it's event, but the event for Button_1_2 and Button_1. Initially, I fixed that by attaching a hitArea inside this movieclip events, but now I'm running on other issues and I was wondering that if there was a way to disable this option, so if you click on movieclip to Button_1_2_1, I only get the event for this one, is not parents?

  Many thanks for any help!

  You are welcome.

  p.s. in the future, please mark helpful/correct responses.

• small amount of soup at the event, display problem

  Small amount of soup contacted the side of my laptop, where evacuation, the laptop has flashed blue waves. Sometimes, it works very well but most of the time, it flashes waves blue and sometimes black or gray rest until never. Help, please

  SIMZCOOL

  Sorry, but it seems that some of the internal components is wet soup and are at short-circuit.

  This will only get worse until something finally completely fails.

  What you need to do is to find a certified HP repair center and pay to clean the laptop.  This is not going to be cheap.  But if you don't do this, it will fail.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• 6.0 touch event propagation problem

  I was wondering if anyone has seen this behavior:

  When you tap the radio button on the torch, the radio button actually called navigationClick method as well as the touchEvent reminder screens...   This navigation click returns with status equal to 0.

  Only occurs on RadioButtonField, all other fields correctly call touchEvent only when they are hit.

  Wonder why screens/field navigationClick method would be called on a single touchscreen device.

  Dnepr wrote:

  Looks good, if I manually using the touchEvent turning true that he will not call navigationClick.

  If the field does NOT consume the event, it calls navigationClick.

  Interesting!

  In fact, it is very intuitive - if I use TouchEvent.CLICK, I wait for the rest of the framework simply accept that and jump any further processing, including conversion to navigationClick().  If I have not (return false) or if I delegate the rest of the processing to the framework (super.touchEvent (message)), I expect to continue its default processing of return.

  I hate a lot of things on the behavior of BlackBerry, but this bit is OK in my book

• Some subtle problems with two monitors on Windows 7

  I used two monitors with your Windows 7 Desktop for quite awhile and I just had to replace a.  This is a problem which is probably easy to fix, but I don't know how to do it.

  I figured out which monitor, I wanted to just in front of the keyboard (the larger one) and that I wanted on my right.  The new is more.  They both work very well, but there are two problems:

  1. the office and the taskbar are in the older monitor to the right - I do not know how to move.

  2. the mouse is confused.  He considers that the monitors are in the reverse position.  In other words, when the mouse is moved on the screen to the right, I have to move it OFF THE RIGHT EDGE OF the SCREEN to enter the screen on the left.  I know that I can get used to this, but I'd rather not have to.

  Thanks in advance.

  DK

  Right-click on an empty space on the desktop and choose "Screen Resolution."

  (or Panel of-> screen-> the resolution).

  Above under 'Change the appearance of your screens', you should see two icons of the screen display.  Simply slide one on the right to the left of the icon on the left (so that they switch positions). Then press "OK" your way out.

  To select the screen that contains the task bar, select the icon for this monitor in the same screen as above and a small box should appear below the "Multiple displays" line that says 'Make this my primary monitor '.  Just check this box and OK your way out.

  HTH,

  JW

• ButtonField focus in events management problem

  Hi all

  I have this button that starts a background thread to do something of your time. When I push the button and run the wire the focus is lost. Somehow the focus of the button is restored after the background thread is completed.

  Here is a code snippet:

  ButtonField button = new ButtonField("start");
  button.setChangeListener(new FieldChangeListener() {
      public void fieldChanged(Field field, int context) {
          startProcess();
      }
  });
  
  private void startProcess() {
      new Thread(new Runnable() {
          public void run() {
              // do stuff
          }
      }).start();
  }
  

  Why the button loses focus when a background thread runs?

  Thank you!

  Try to instantiate your button with... New ButtonField("start",ButtonField.CONSUME_CLICK);...

• (BUG) Problem creating events of the calendar in the past (IOS 9.3.1)

  Recently, I get such a problem:

  1. I opened a last date in the calendar default ios

  2. create an event:

  -put the name of the event 'Accident '.

  -day 17 April 2016

  -start time 16:00 (end time 17:00)

  -all other attributes - default:

  calendar by default (have also 1 calendar personalized in a list)

  No rehearsal, no trigger time, no participating, call back in 30 minutes

  * a tried also the attributes of different event with the same effect. Didn't help not also choose my google calendar. tried several times)

  3. Press 'Add '.

  wait: event created, appears on that date and remains

  get: event appears and disappears in about 1 second

  What could be? Can help you with this? What IOS Bug?

  Creation of future events - no problem

  Settings - Mail, Contacts - synchronization scroll to calendars - events - How back does go - you may need to reset it to take account of the date that you set the old event from

• AppStore connection problem!

  Hello

  I'm running a 21.5 "iMac with OS X El Captan 10.11.5. My problem is that I am not able to connect to iCloud and the App Store on my Mac.

  The error I get is "there was an error connecting to server Apple ID"

  The same username and password works perfectly well on the site of iCloud, my app store on the iPhone and the iPad, but not on Mac.

  What is the way my iMac communicates via the internet? We have a firewall. And oh, the software update for El Capitan is downloading as I type; He didn't even ask for IDs, just started downloading automatically. The same thing happened yesterday with the updates listed on the tab Update on the app store - they have been is downloaded yesterday without asking my login details but it was a rare event; connection problems I described above took place during the last month or so.

  How can I fix?

  Thank you!!

  Try disconnecting all the services using your Apple ID on your iMac, iTunes, FaceTime, iMessage and try to sing.

  If you cannot connect to the iTunes Store - Apple Support