Event trigger on the location of specific scrolling

Similar Questions

• Manager not an event trigger in the field display name of the user registration form

  Hello

  I want to customize the display as name lastname.first name field in the user registration form.

  so i have creates a process Manager field events, but this isn't the trigger to the full name field, he demonstrated error ion Orchestra.

  But even when I went with first name , it's showing form name.first perfectly.

  can anyone help me on that there is any event triggered default and does not allow to create a custom event on the display name field.

  Thank you

  Display name must be placed in a Hashtable as follows:

  Map dispNameMap = new HashMap();
  dispNameMap.put ("base", lastName + "" + firstName); then pass this card as:

  Parameters.put ("Display Name", dispNameMap);

• Event trigger after the key (or scanned bar code)

  Hello

  I'm doing the following... I have a string field where the user enters a code or manually scan the code in it. Based on this code I want to trigger an event that will examine this code (string) and output to another channel (esssentially using a sequence dealing with an event). Using change of value allows to get what I want, if I were only to enter a value, but I have to be able to do that with multiple values. any help on how to address the issue would be appreciated. I'm using Labview 8.2

  Thank you!!

  TER:

  If you do a right click of your control of the chain, "Update value while typing" enabled? You may need to disable it to prevent the value of change event of firing until the entire string is entered.

  In addition, if you enable "Single-line limit", who will do the "enter" button to submit the value rather than adding a new line (which fires the value change event if you have disabled "update while typing".

• Event trigger once the user view article

  Hi guys,.

  Nobody knows what kind of Javascript event handlers are supported on simple editing of DPS?

  For example, $(window) .focus () or window.focus (), doesn't seem to work in the DPS application even if it works in the web browser.

  Basically, I want to raise an event when the user displays an article. For now, events in the following article are fires in advance due to prefetching of pages. Is there a way to do it, while keeping the content Web overlay - Auto Play function is active?

  Thank you very much!

  Juan

  Try onAppear and onDisappear.

  Neil

• event trigger using the keypad?

  Anyboy knows how to use the numbers pad numbers as triggers. I can enter/return to work, but not the numbers (only the numbers on the top row of the keyboard. You can use the numeric keypad. Are these special characters reflected?
  
  Here's what I use for a test
  
  If keyPressed("6") then member("you_6").text = "you hit 6.
  If keyPressed (RETURN) then member("you_ENTER").text = "you press ENTER.
  
  any ideas would be appreciated

  It seems that the instructions box using the num keys have problems when running for some events.

  I have little luck with this method instead - more time but works

  on keyDown

  If keyCode = 82 then member("you_0").text = 'you hit 0 -' /play num0
  If keyCode = 29 then member("you_0").text = "you hit 0" - 0 / play

  ----------
  If keyCode = 76 then member("you_ENTER").text = "press ENTER" - enter
  If keyCode = 36 then member("you_ENTER").text = "press ENTER" - enter
  -If keyPressed (RETURN) then member("you_ENTER").text = "press ENTER" - enter
  If keyCode = 36 then sprite (4) .encre = 6 - action xtra for entry
  -----------
  If keyCode = 65 then Member ("you"). Text = "hit you." - No. / break
  If keyCode = 47 then Member ("you"). Text = "hit you."-. / break

  ---------------
  If keyCode = 88 then member("you_6").text = 'you hit 6' - num6 / following
  If keyCode = 22 then member("you_6").text = 'you hit 6' - 6 / following
  --------------
  If keyCode = 86 then member("you_4").text = "you hit 4-" num4 / previous
  If keyCode = 21 then member("you_4").text = 'you hit 4' - 4 / previous

  end if
  end if
  end if
  end if
  end if
  end if
  end if
  end if
  end if
  end if
  end if
  end

  for all the world wants - 76 is the keycode for keypad entry. It is not documented and cannot be tested with window message as numb enter is keyboard shortcut for stop current project running.

  I've used this to find.

  on keydown
  Member ("FindIT"). Text = "" & keyCode

  Darrel thanks for your help earlier!

• Mouse is to select the elements when I scroll in Flash Player.

  Every time I play a game using Flash Player and I put it in mode full screen my mouse will select items while using the scroll wheel.  If its in an area where there is nothing to select then it will zoom in and out, but as soon as the cursor is on something that can be selected it will choose.  This does not happen when I use the same application in the MS-edge browser or does it occur when I do the same thing under Windows 7.  So I think its something between Chrome and 10 of Windows, but I would check here if any have fact the thought experiment.

  I'm using Chrome version 51.0.2704.79

  Flash player 21.0.0.242

  Windows 10

  The mouse driver is updated as well. I swapped the mouse with the other and got the same effect.

  Well, I have more information.  This is a bug in Chrome.

  We reported here:

  Question 620974 - chrome - MouseDown event trigger for the fullscreen mouse wheel - Monorail

• Set the location on parameters event / Signal

  Hi, I use locations on my app.

  If location not defined on (settings BlackBerry)

  I'm open settings

  // If Location settings not ON
  if ( !iPositionSource->property("locationServicesEnabled").toBool() )
  {
          // Open Location Settings
      InvokeManager invokeManager;
      InvokeRequest request;
      request.setTarget("sys.settings.target");
      request.setAction("bb.action.OPEN");
      request.setMimeType("text/html");
      request.setUri("settings://location");
      InvokeTargetReply *reply = invokeManager.invoke(request);
  }
  

  But if I want the event after user change the location settings, there is this event?

  Thank you

  Specifically, I would recommend controlled again once your application is in the foreground. There is no signal that tells you the permissions have changed.

• Is it OK to trigger 2 loops of event out of the same control?

  I have two circuits of event that will trigger when the user click on the Exit button. Is this ok to trigger the two loops off the coast of the same order? It works fine, but I don't know if there could be a problem. Please see below. Thank you!

  sfrosty wrote:

  Perhaps another point I have wired 50ms to the timer of the event MENU structure and want any delay in the structure of the MAIN Event. Not sure if it is a valid argument.

  Why?  You do something else in this loop?

  I recommend spending your menu commands in your main event loop.  You'll thank yourself later.

• Where is the location of the file Outlook.pst in Windows 7, the AppData folder does not appear in the user specific folder?

  original title: where is the location of the Outlook.pst file in Windows 7?

  I want to copy my Outlook.pst to my desktop (Windows XP Pro) data to my laptop.  Outlook displays the outlook.pst file which will be located in the "C:\Users\Specific User\AppData\Local\Microsoft\Outlook" folder on my laptop.  However, when I try to access this folder in Windows Explorer, the AppData folder does not appear in the user specific folder.  I find in my office because Windows XP does not hide it, but he must hide in the Windows 7 operating system on my laptop.  How can I get it so that I can copy the file outlook.pst from my desktop to my laptop?  If the file is hidden, is there an easier way to copy outlook data from one computer to another?

  Chris

  To see AppData, enable the display of hidden files and folders in the Control Panel > Folder Options > view .

• Main events doesn't trigger all the time

  Hi all

  At my request, I added a key listener, but he's not trigger all the time. For example when I logged in initially is not the trigger. But when I go to another page and come back using alt + tab then it works. When there is no alert is also on the page of the key event not triggers.

  Kind regards

  Roman.

  Look on systemManager.stage, not application

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to play a specific scroll position a symbol ONCE?

  Hello

  I was wondering if it is possible to trigger a symbol to play when a user scrolls past a point of scrolling specific only once?

  I managed to create a trigger for a symbol that fires at a specific scroll position, but he fires several times (when the user continues to scroll)

  I tried to use:

  "is' eqivalent, so that it would only start at a certain time of scroll, but this only triggers the symbol to play if the user uses their mouse scroll wheel and does not play if the user uses the scrolling of the window.

  Here is my code (my apologies if this is disorder I only started to learn JQuery a week ago):

  {$(window) .scroll (function ()}

  var mySymbolObject = sym.getSymbol ("rollHead");

  var y_scroll_pos = window.pageYOffset;

  var scroll_pos_test = 500;

  if(y_scroll_pos > scroll_pos_test) {}

  SYM.$("rollHead"). Show();

  mySymbolObject.play (1000);

  }

  if(y_scroll_pos < scroll_pos_test) {}

  SYM.$("rollHead"). Hide();

  mySymbolObject.stop ();

  }

  });

  I know the Manager '.one' (if that's the right term) can raise an event trigger once, but I can't seem to make it work.

  Any help or advice would be much appreciated.

  Thank you very much.

  Jon

  P.S. I want to just say a HUGE thank you to Adobe for advanced manufacturing. It's an incredible tool, and the fact that it is free makes it a million times better.

  Hi, Jon-

  Sounds like what you want to do is to save the State somehow.  You can use a variable - in your code here:

  First of all, in your compositionReady:

  sym.setVariable ("symbolPlayed", false);

  Later, in your code:

  if(y_scroll_pos > scroll_pos_test) {}

  var symbolPlayed = sym.getVariable ("symbolPlayed");

  If (! symbolPlayed) {}

  SYM.$("rollHead"). Show();

  mySymbolObject.play (1000);

  Add to the variable

  sym.setVariable ("symbolPlayed", true);

  }

  }

  And so on.

  Hope that helps!

  -Elaine

• What events trigger service requests?

  Hello

  I know that CHS has algorithms to assess the communications between the sophisticated devices but, is there an easy solution for a customer who asks what events trigger Service requests?

  Kind regards

  Gabriel Tlalpachicatl

  Hello Gabriel,

  Under the technical means of CHS, there is a "Smart Call Home monitoring details" document. This provides specific details for each diagnosis, environment and alarm of syslog by device.  It must also offer if an SR would be open.

  Tim

• Get the location of the device

  I had my application built with HTML5 for OS7, I build for BB10 and I decided to go with a feel more native and waterfalls. I must admit however, the old WebWorks documentation was much wasier and friendly, you had a small example of using each feature.

  I'm having a problem getting the location of the device, I went through the sample application "Diagnoses of the situation", but it's really complicated (he has 3 classes of objects with a ton of features to get the location).

  I'm just trying to find the location of the device, using cell towers, every two minutes. I want to create and the entire class for this? Also, how to trigger this function of the part of Cascades?

  I'd appreciate any help!

  Hello

  Here's a simplified example of code. These files are from the empty project template by default in the IDE of Momentix (file-> New-> project-> BlackBerry Project-> Application of stunts-> empty project Standard). They have been updated to include cellsite positioning updates every two minutes. The output will simply through cost.

  applicationui.h:

  // Default empty project template
  #ifndef ApplicationUI_HPP_
  #define ApplicationUI_HPP_
  
  #include 
  
  #include 
  
  using ::QtMobilitySubset::QGeoPositionInfo;     // so the SIGNAL()/SLOT() macros can have matching signatures.
  
  namespace bb { namespace cascades { class Application; }}
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class ApplicationUI : public QObject
  {
      Q_OBJECT
  public:
      ApplicationUI(bb::cascades::Application *app);
      virtual ~ApplicationUI() {}
  
      void startCellSiteUpdates();
  
  public Q_SLOTS:
      void positionUpdated(const QGeoPositionInfo & pos);
      void positionUpdateTimeout();
  
  private:
      QtMobilitySubset::QGeoPositionInfoSource * _source;
  };
  
  #endif /* ApplicationUI_HPP_ */
  

  applicationui.cpp

  // Default empty project template
  #include "applicationui.hpp"
  
  #include 
  
  #include 
  #include 
  #include 
  
  #include 
  
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app)
  : QObject(app)
  {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
      // set created root object as a scene
      app->setScene(root);
  
      // Instantiate the default QGeoPositionInfoSource
      _source = QtMobilitySubset::QGeoPositionInfoSource::createDefaultSource(this);
      if ( _source ) {        // connect to the QGeoPositionInfoSource's signals, to get the position info and/or error status
          connect(_source, SIGNAL(positionUpdated(const QGeoPositionInfo &)), this, SLOT(positionUpdated(const QGeoPositionInfo &)));
          connect(_source, SIGNAL(updateTimeout()), this, SLOT(positionUpdateTimeout()));
      }
  }
  
  // call this method to start the position updates
  void ApplicationUI::startCellSiteUpdates()
  {
      if ( !_source ) {
  
          std::cout << "Error getting default position info source" << std::endl;
          return;
      }
  
      // QtLocation allows control over which provider(s) will be queried for position info. NonSatellitePositioningMethods
      // includes wifi and cellsite fix types.
      _source->setPreferredPositioningMethods( QtMobilitySubset::QGeoPositionInfoSource::NonSatellitePositioningMethods );
  
      // On BlackBerry the default QGeoPositionInfoSource allows finer control over the fix type. This extension, and others, take advantage of the Qt property system.
      // Here we are interested only in cellsite fixes.
      _source->setProperty("fixType", "cellsite");
  
      // set the update interval to a couple of minutes.
      _source->setUpdateInterval(120000);
  
      // start the updates, which we expect to receive in ApplicationUI::positionUpdated()
      _source->startUpdates();
  }
  // slot connected to the QGeoPositionInfoSource::positionUpdated() signal
  void ApplicationUI::positionUpdated(const QGeoPositionInfo & pos)
  {
      // print out the position in a convenient format:
      std::cout << pos.coordinate().toString().toLatin1().constData() << std::endl;
  
      // print out the accuracy as well, if available
      if ( pos.hasAttribute(QtMobilitySubset::QGeoPositionInfo::HorizontalAccuracy) ) {
          std::cout << "    horizontal accuracy = " << (double)pos.attribute(QtMobilitySubset::QGeoPositionInfo::HorizontalAccuracy) << std::endl;
      }
  
  }
  // slot connected to the QGeoPositionInfoSource::updateTimeout() signal
  void ApplicationUI::positionUpdateTimeout()
  {
      std::cout << "timeout occurred" << std::endl;
  
      // On BlackBerry more information as to why the device timed out may be available:
      bb::location::PositionErrorCode::Type errorCode = bb::location::PositionErrorCode::None;
  
      if ( _source->property("replyErrorCode").isValid()  ) {
          errorCode = _source->property("replyErrorCode").value();
          if ( errorCode != bb::location::PositionErrorCode::None ) {
              std::cout << "    " << _source->property("replyErrStr").toString().toLatin1().constData() << std::endl;
          }
      }
  }
  

  And main.cpp looks like this:

  // Default empty project template
  #include 
  
  #include 
  #include 
  #include "applicationui.hpp"
  
  // include JS Debugger / CS Profiler enabler
  // this feature is enabled by default in the debug build only
  #include 
  
  using namespace bb::cascades;
  
  Q_DECL_EXPORT int main(int argc, char **argv)
  {
      // this is where the server is started etc
      Application app(argc, argv);
  
      // localization support
      QTranslator translator;
      QString locale_string = QLocale().name();
      QString filename = QString( "SimpleLocation_%1" ).arg( locale_string );
      if (translator.load(filename, "app/native/qm")) {
          app.installTranslator( &translator );
      }
  
      ApplicationUI * appUI = new ApplicationUI(&app);
  
      appUI->startCellSiteUpdates();
  
      // we complete the transaction started in the app constructor and start the client event loop here
      return Application::exec();
      // when loop is exited the Application deletes the scene which deletes all its children (per qt rules for children)
  }
  

  Your file bar - descriptor.xml must contain this line to allow approval of the app for location-based services:

      access_location_services
  

  Also to ensure that location-based Services are enabled under settings on your device.

  Your .pro file should contain this line so that the QtLocationSubset library is linked:

  LIBS += -lQtLocationSubset
  

  I hope this helps!

  Jim

• How can I activate/disable the display of a scrolling text object?

  I am a relatively new user of Captivate and I am using the Interaction of learning in 8 Captivate text scrolling. Specifically, I would like to have a button on the screen when you click it, the drop-down text box will be displayed for the learner. In addition, when viewing, I want a REJECTION or button CLOSE to allow the user to hide the drop-down text box. Basically, I want them to be able to toggle the scrolling text box market at their convenience. I have the following set in place.

  1 READ MORE graphic.

  2. click on the box 1 interaction drawn at the top of the image to READ MORE.

  3 interaction marquee training.

  4. close.

  5. I have a Click Box 2 cartoon above the button interaction CLOSE.

  6. I have items 3 and 4 together to form GROUP_1.

  7 GROUP_1 is set to NO VISIBLE output.

  8. click on box 1 has defined action so that the success is to see THE GROUP_1.

  9. click on box 2A action defined for that success it is HIDE GROUP_1.

  Here's what it looks like:

  

  When I saw my project, the first part works fine, I click on READ MORE and my scroll text box and a button CLOSE appear as they should. However, when I click the button CLOSE, it moves to the next slide instead of simply to hide the group.

  Also, if I publish the project, the drop-down text box appear not at all. The button CLOSE pops up so when he is supposed to, but the space where the text box should appear does not display anything. I tried the consultation in Chrome Version 43.0.2357.132 m, 11 Version IE and Firefox v39. It seems to be related to the area of text scrolling in a group because I put a box of scrolling text on a separate screen and it shows well in all browsers.

  So, I'm looking for advice, including at - it an easier way to achieve the goal of enabling/disabling of the scrolling text box on and off the screen? TIA!

  Dee

  One thing you need to know using unique actions on objects interactive such as click on boxes or buttons will also trigger an action to continue later by default.  This is probably why your slides advance when you don't want to.  To work around this problem, you must replace the shares you are currently using with stock Standard or conditional Actions that do the same thing.  They don't progress not the timeline unless you stipulate specifically action continues or a jump to slip as well.