Intel alert does not

Similar Questions

• Intel WiDi does not work

  Original title: How can I open this file extension *.chm kine?

  sometimes extensions unknowns gall are meet. This time need to open file "chm' extension."

  This file of intel corporation.

  Unable to locate the help file ' c:\Program files (X 86) \Intel corporation\intel WiDi\en\WiDiApp.chm ".

  If file is whether to install, but could not open it and Intel WiDi does not work.

  Thank you for your help

  Hi Sung,

  Welcome to the Microsoft community.

  It seems that you are facing problems with Intel Wireless Display. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. what exactly is the problem that you are facing on the computer?

  3. what happens when you try to open the .chm files?

  4. do you get an error message? If Yes, what is the full and exact error message?

  5. What is the brand and model of the computer?

  CHM files are Microsoft Compiled HTML Help.

  To solve the problem with Intel Wireless Display, I suggest you to update the drivers and check if it helps. You can check the link for more information:

  http://www.Intel.com/support/wireless/wtech/IWD/sb/CS-031109.htm?wapkw=031109

  Alternatively, you can check the link for Intel's support:

  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  If you are always faced with the question, please answer with more information to help you better.

• WhatsApp alerts does not not after update iOS10

  I upgraded to iOS10 last night and since the update my custom in WhatsApp alerts are no longer works. Any sound, I set the alert, I get only one defect, his credits when I receive a message.

  Anyone know if this can be corrected by the intervention of the user, or that it does not require an update app WhatsApp will have to produce in the next few days?

  With the help of iPhone 6/16 Gb - WhatsApp v2.16.10 - iOS 10.0.1

  I had the same problem with the MS Outlook application.  Uninstalled and reinstalled the app to fix.  Takes screenshots of the app settings before I removed it.  I hope this helps.

• Wireless LAN card Intel 2200 does not connect

  Hello

  I just bought an Intel Pro/series 2200 b/g.

  I installed the driver, and it detects the wireless network, but does not connect.

  I used the Intel and Toshiba drivers, but to no avail. My old card, the 2100 works fine.

  Can anyone help?

  Best regards

  George

  Hello George

  You cannot use Toshiba or Atheros driver for the Intel wireless adapter. This is known issue and I found an interesting topic about it.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4451

  I put t know what model of phone you are using, but it's obviously Intel and a 2200 wireless card problem.

• Satellite 1000-Z2: driver Intel GPU does not - I should update the BIOS?

  Hello

  I just downloaded and installed the latest driver for satellite 1000 Z2 graphics card which is Intel(r) 82830M chipset Driver revision: 6.14.10.3889. However, it does not work.

  I wonder if I should update my BIOS first. Thank you

  Hello

  It s always a good idea to update the BIOS. Thus, it would be the best you try the BIOS updated and then reinstall the graphics card driver. You can also (if it isn't already) check www.intel.com and download the drivers from there, they are sometimes more up-to-date than the drivers of toshiba. :)

  Please give some comments if the installation of the graphics card took place after the BIOS update.

  See you soon

• Intel WiDi does not work after the installation of update Windows 10 anniversary. X 1 yoga

  I get a message Notification of Windows ' cannot run this application on this PC: Intel WIDI software display does not work on this version of Windows. "

  This message appeared after the upgrade to Windows 10 anniversary.

  Indothai,

  Microsoft to Intel Widi support was eliminated in 10 Windows. WIDI has been replaced by an application called Miracast. If you try to run an application depends on Widi, you may need to upgrade the application or to find a new use.

  For more information, see this Intel review: https://communities.intel.com/docs/DOC-111153

  Thank you

• HP Advisor alert does not

  Hello

  I installed windows 7 on my laptop. After you install the updates, the HP Advisor appears, but does not. In addition, it says 2 recommended alerts require your attention. It's boring because it is whenever I restart the computer. What could be the reason and what could be the solution?

  Thank you

  Contact HP support

  Related-online http://goo.gl/pNXWX

• Intel RST does not

  Pavilion dv5t-2100 CTO Windows 7 64 bit.  Apparently the fix requires correct download software/driver for chipset intel.  Problem is how to identify the chipset.  Intel does not provide any utility for the chipset for W7 64-bit ID!  Catch 22?  What should I do?

  Yes, you are right, and the only suggestion I can offer would be to uninstall the RST software in the Add/Remove Programs list.

  As you have seen the sata AHCI controller listed in the Device Manager, there was no RAID controller.  It's an or you other.

  I have posted earlier, you need not RST software.

  Install the latest driver for this chipset chipset and who will install the latest driver for the sata ahci controller.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20019&lang=eng

• BlackBerry 10 sounds Alert does not

  I am currently using Z10 with the latest version of the software that has completely updated yesterday on wifi and BlackBerry link. Unfortunately after the update complete, alert sound of my camera does not work. I have not any warning sounds to my notifications (i.e: FB, Twitter, WhatsApp, etc.) even when I played my music or video. Help, please

  Hi arthuryhs72,

  My BB is ok now. It has resolved itself. A few days later his return. LOL thanks anyway

• The background thread alert does not work

  Hello

  I have read the article http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/... and followed the instructions to display the background thread alert. However, the alert is not displayed and IU locks (freezes). Specifically, the event of click/touch does not work, but the background thread continues to run.

  Structure of my program. The main class (with the main function) extends UiApplication. I create in the function main instance of the class that extends the Application. This class starts backgorund wire. I am missing something or making the wrong way?

  Sorry I have expired, I was going to write a long response to this.

  But in short, remember that your automatic boot process and your user interface process, both through main with different parameters and are the BlackBerry is concerned, different applications.  So it may be an Application, the other can be a UiApplication, and both can enterTheDispatcher.

  No two instances of the same Application, they are two different Applications.  They can be of different instances of the same Application class, but it is a special case.  It depends on what you create in the main routine.

  You can play a merry dance with such things.  For example, having a UiApplication be started by the automatic boot process, and then the boot gui process can find it and just put in the foreground, rather than creating a new UiApplication.

  Generally however people create a request and a UiApplication.  The problem with the use of these different applications, is that things like static are not shared.  Therefore, use something like RuntimeStore to share data.  It is a pain and something that if I can avoid.

  It is perfectly possible to have a UiApplication, which starts when the device starts, runs Background Threads that are working in a network and is bought in the foreground by clicking on an icon.  Code is more complicated, but not much.  And you must have complicated the code when you run the network Threads background to deal with the unit off power and then power anyway.

  Hope that clarifies somethings.

• Intel WiDi does not connect

  I have a dual boot Windows 7 laptop with Intel WiDi 8/Windows installed under the two BONES.  The WiDi works very well by putting with a Belkin Screencast on the Windows 7 operating system.  It does not connect (scanning does not detect the Belkin) on the Windows 8 operating system.  I've updated the Windows 8 and Windows 7 WiDi such installation as recommended by Intel

  As of December 4, 2013:

  Thank you, Mr. Intel. As of today the Belkin Screencast is finally back up and running with the new driver Intel Centrino Advanced N-6235 8.1 Windows located on the Intel web site. Beware if you need to update manually from the web site that you choose the suitable driver for your version of Windows 8.1, i.e., either 32-bit or 64-bit (although if you choose the wrong, I do not think that it will allow you to install it, so you'll be sure).

  You must also remove the first device to 'TV' that appear in the Windows printers and devices.

  Connection is through the Windows 8.1 "Charms" bar, choose «Belkin Screencast»

  Good luck. I think that others are still not successful, but for me - it works really well.

  + + +

• event alert does not work

  Hi all

  I do an event alert then I do insert into the table, it does not, whereas when I changed for the periodical it works fine.

  can any body help

  Hi PK,.

  I tried too in my test case,

  We get a first same error. Later I changed the name of the application, then it works fine.

  Note that there are two fields of application name. First field only I gave Payables. Second field should be great book otherwise in table field gl_daily_rates table will not display in LOV for other applications.

• Concert X 520 - DA2 10 Intel NIC does not appear after installation of vib

  I've beaten my head against the wall trying to figure out what I'm doing wrong on my 6.0 ESXi host. Here is my equipment

  Server: HP DL360 G6

  NIC: Intel X 520 - DA2

  I followed the instructions of KB and installed the driver:

  
  

  software esxcli vib install d /var/log/VMware/ixgbe-3.15.1.8-offline_bundle-1240857.zip

  
  

  I rebooted the server and checked that the VIB is in the list

  
  

  [root@localhost:~] esxcli list of software of vib

  Name Version Date seller installation acceptance level

  -----------------------------  -----------------------------------  ------  ----------------  ------------

  NET-IGB 3.15.1.8 - 1OEM.550.0.0.1198611 Intel VMwareCertified 2015-07-02

  
  

  I see that the NETWORK card in the PCI hardware list

  
  

  0000:04:00.1

  Address: 0000:04:00.1

  Segment: 0x0000

  Bus: 0x04

  Slot: 0x00

  Function: 0 x 1

  VMkernel name: vmnic3

  Name of the vendor: Intel Corporation

  Device name: 82599EB 10 Gigabit IFC / SFP + network connection

  Owner of configured: unknown

  Current owner: VMkernel

  Vendor ID: 0 x 8086

  Device ID: 0x10fb

  Subprovider ID: 0 x 8086

  Subdevice ID: 0x7a11

  Device class: 0 x 0200

  Device class name: controller Ethernet

  Programming interface: 0x00

  Revision ID: 0 x 01

  Interrupt line: 0x0b

  IRQ: 11

  Interrupt vector: 0 x 30

  Pin PCI: 0x01

  A begotten of the Bus: 0x00

  Flags: 0 x 0201

  Module ID: 4110

  Module name: vmklinux_9

  Chassis: 0

  Physical location: 1

  Location Description: Slot PCI - E 1

  Able passthrough: true

  Parent device: PCI 0:0:9:0

  Device Dependent: 0:4:0:1 PCI

  The Reset method: reset function

  FPT feature: true

  But the NIC does not appear in the list of NIC under Network esxcli or in VSphere (just the motherboard Integrated NIC introduce yourself)... What am I doing wrong?

  list of nic network [root@localhost:~] esxcli

  Name PCI Device Driver status Admin link status speed Duplex MAC address MTU Description

  ------  ------------  ------  ------------  -----------  -----  ------  -----------------  ----  ----------------------------------------------------------------------------------

  vmnic0 0000:02:00.0 bnx2 Up Up 1000 Full 1 c: c1: of: 6 c: e2:a0 1500 QLogic Corporation NC382i integrated Multi Port PCI Express Gigabit Server Adapter

  vmnic1 0000:02:00.1 down to 0 half bnx2 1 c: c1: of: 6 c: e2:a2 1500 QLogic Corporation NC382i integrated Multi Port PCI Express Gigabit Server Adapter

  Update: SOLVED

  Towers on the map of X 520 - DA2 Intel (and apparenlty overall X 520 series) if non-Intel SFP + modules are used, it does not appear in the list of available adapters.

  Remove the non - Intel FPS, and it appears immediately in ESXi

  list of nic network [root@localhost:~] esxcli

  Name PCI Device Driver status Admin link status speed Duplex MAC address MTU Description

  ------  ------------  ------  ------------  -----------  -----  ------  -----------------  ----  ----------------------------------------------------------------------------------

  vmnic0 0000:02:00.0 bnx2 Up Up 1000 Full 1 c: c1: of: 6 c: e2:a0 1500 QLogic Corporation NC382i integrated Multi Port PCI Express Gigabit Server Adapter

  vmnic1 0000:02:00.1 down to 0 half bnx2 1 c: c1: of: 6 c: e2:a2 1500 QLogic Corporation NC382i integrated Multi Port PCI Express Gigabit Server Adapter

  vmnic2 0000:04:00.0 ixgbe upwards up to 10000 Full 90:e2:ba:84:39:90 1500 Intel Corporation 82599EB 10 Gigabit IFC / SFP + network connection

• Intel WiDi does not work with Satellite L850 - 1 L 1

  Google translator

  object I have a computer toshiba laptop satellite L850 - 1 L 1 and a television always toshiba model 50L7335D

  I can not interfacing with intel widi, what should I do?

  Thank you all

  The Satellite L850 - 1 L 1 was preinstalled and released with Windows 8
  You always use this system of Windows 8, or that you have upgraded to Windows 8.1?

  I m application because Intel WiDi is NOT supported under Windows 8.1 on Toshiba laptops and you will not be able to use the Intel WiDi with Win 8.1

  Here are the details that I found on the page of Toshiba:
  [Important notice for users of Wireless Display (WiDi) | http://aps2.toshiba-tro.de/kb0/TSB3903IF0000R01.htm]

• HP Pavilion 15 laptop: Uptime Intel CPU does not go to zero

  Hello

  Is it normal that my CPU uptime does not go to zero?

  When I quit the pc everythings is now closed (now because before I have a problem http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/hp-doesn-t-shut-down-or-hibernate-HP-Pavilion-... but now it is solved thanks @DavidPK for his help) when I start the pc is wake up normally but if I go to the Task Manager, I see the uptime of cpu does not go to zero. to do this, go to zero, the only way is to restart the computer after you watch...

  Is this a problem? If so can you help me?

  You can see my screenshoot

  

  Hello

  This is the normal case "quick start" is selected in the power options menu and there is really no problem with that. "

  You can always check that this is the case as follows.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows.

  Stop the notebook, then start it again and check the value of the CPU operating time.

  Personally, if it is not causing any trouble, I would turn on "quick start".

  Kind regards

  DP - K