Manager not an event trigger in the field display name of the user registration form

Similar Questions

• Event trigger once the user view article

  Hi guys,.

  Nobody knows what kind of Javascript event handlers are supported on simple editing of DPS?

  For example, $(window) .focus () or window.focus (), doesn't seem to work in the DPS application even if it works in the web browser.

  Basically, I want to raise an event when the user displays an article. For now, events in the following article are fires in advance due to prefetching of pages. Is there a way to do it, while keeping the content Web overlay - Auto Play function is active?

  Thank you very much!

  Juan

  Try onAppear and onDisappear.

  Neil

• Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference.

  Hello
  
  We have integrated our portal customized with the AAU in document taskflows webcenter application.
  We are not able to view the Soum, extracted from the Complutense University of MADRID. Here's the error to get connected UCM whenever we access the application.
  
  Event generated by the user 'anonymous' the host 'CIS '. Could not get the reference. Can not read the file. [Details]
  An error has occurred. The stack trace below shows more information.
  
  ! csUserEventMessage, anonymous, CIS! $! csCollectionUnableToGetReference! csCollectionCannotRead
  intradoc.common.ServiceException:! csCollectionUnableToGetReference! csCollectionCannotRead
  * ScriptStack COLLECTION_GET_REFERENCE
  3:getReferenceMeta, * no captured values *.
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:2115)
  at intradoc.server.Service.buildServiceException(Service.java:2260)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
  Collections. CollectionUserHandler.getReferenceMeta (CollectionUserHandler.java:1765)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:48)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:600)
  at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
  at intradoc.server.Service.doCodeEx(Service.java:533)
  at intradoc.server.Service.doCode(Service.java:505)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
  at intradoc.server.Service.doAction(Service.java:477)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
  at intradoc.server.Service.doActions(Service.java:472)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
  at intradoc.server.Service.executeActions(Service.java:458)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
  at intradoc.server.Service.doRequest(Service.java:1890)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435)
  at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  
  Kind regards
  Francis P

  What is the security group of your records? It is public.

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• Advanced actions do NOT appear to work ONCE the user fills in a questionnaire?

  Advanced actions do NOT appear to work ONCE the user fills in a questionnaire?

  In my project, I have disabled the Quiz results slide and manually set the actions of success/failure to "go to" a customized results slide:

  

  On results carts custom pass/fail (as well as all the slides that follow), I need to disable the playback bar so that the user cannot use the navigation controls. I have created a tip action to disable the playback bar and set it on every slide that follows the Quiz:

  

  The tip action fails to disable the playback on my personal results slides bar; but I know that the action does not work correctly because it works on all the slides that follow my personal results slides. This leads me to believe that there is something about the function "go to" success/failure that is causing my Advanced action not to function. Is there a work around for this?

  Just checked out, and it works for me. I combined the jump and turn off the bar reading a success and failure action:

  SuccessAction

  • Jump to drag the success
  • Assign the cpCmndShowPlaybar with 0

  FailureAction

  • Jump to slide fail
  • Assign the cpCmndShowPlaybar with 0

  Why you split? He was not even the need to create an advanced action.

• Event trigger after the key (or scanned bar code)

  Hello

  I'm doing the following... I have a string field where the user enters a code or manually scan the code in it. Based on this code I want to trigger an event that will examine this code (string) and output to another channel (esssentially using a sequence dealing with an event). Using change of value allows to get what I want, if I were only to enter a value, but I have to be able to do that with multiple values. any help on how to address the issue would be appreciated. I'm using Labview 8.2

  Thank you!!

  TER:

  If you do a right click of your control of the chain, "Update value while typing" enabled? You may need to disable it to prevent the value of change event of firing until the entire string is entered.

  In addition, if you enable "Single-line limit", who will do the "enter" button to submit the value rather than adding a new line (which fires the value change event if you have disabled "update while typing".

• IOM Lotus Notes target reconciliation - Recon events assigned to the user

  Hello
  
  I have configured the Lotus Notes in IOM connector and I executed the reconciliation of the target for a certain user exists in Lotus Notes, which does not exist in the IOM. During reconciliation, a reconciliation event is created indicating he was assigned to the XELSYSADM user. The next step, I would like to perform is the creation of this user to the IOM, so I opened the IOM system administrator and I connect you as the user XELSYSADM. At this point I opens task list and search for approvals pending or open tasks associated with this event of reconciliation, but there aren't any. Can anyone help? How can I fill this event of reconciliation? How can I create this user?
  
  Thank you very much in advance

  If you want that for no match found, he should go to XELSYSADM then, it must decide what to do whther that the user should be created or not. Then, you can simply run Trusted Recon and change the rule of no match to assigned to XELSYSADM.

  Whenever there is no match then he attributes to XELSYSADM then XELSYSADM can create user if he wants to with the help of the button to create a user.

  But it has a disadvantage as users of Xellerate is used everywhere when we talk about Trsuted Recon, then it will change the rule for scope adapter. You can create dummy resource for recon trust with certain fields even as Xellerate users and return this RO in the HS task attribute. You are finished with your condition.

• Time after the event, without blocking the user

  Hi, I am creating a software to control a power supply. One feature that I have bad to add is a timer.

  I have a structure for the event that fires when the user clicks on the buttons, which most slowly increases the current for a period defined by the user. I want the timer to count so far defined by the user of time (in seconds) after the event fires. One thing, however, is that I need to be free to trigger another event (which stops the power supply in an emergency) so I can't have this synchronization process lock me up for snap buttons.

  I was experimenting with the millisecond timer, as well as with a loop that goes through with a defined time interval, but it is not quite give me the functionality I want. (I've been placing these loops of timing outside the structure of the event to other events run yet, but I want the timer to only is triggered after an event is triggered, is it still possible?)

  If you need more information, just ask, thanks!

  Thnigs to do to dramatically improve your code:

  You need not separate loop.  Put your code from timer inside the structure of the case of timeout event.  Set the time-out to 50 instead of 500 to match what is in your separate loop.  You can get rid of the becaue of queue, it is no longer necessary.  Create registry to offset on the main loop.  When the event occurs to start timer, pass the time for the shift on the right side register.  Wire the shift register on the left side in the event of timeout to use its value.  BTW, the shift in your separate loop register is used to nothing because you do not change the value on the wire.  Don't put all the loop in the case of timeout, get rid of the loop and just put the code of the loop, with the exception of the EndTime variable that can be removed and 50mS delay, which can be removed.

  Put the Boolean value of early Inc. inside the case to start Inc. value change event.  Same for all Boolean values.  Put them in their cases of particular event.

  Get rid of local variables now.  You'll race conditions if you do not, you doing wrong in that you don't need especially now.  Look at the current limit control.  Add a wire from the control of the current limit to where feeds the local variable of the current limit.  Delete the local section.

  Move all the controls from the inside of the structure of the event outside the structure of the event, but still within the main loop.  Wire controls where they are going.  Now you can eliminate all local variables of thos and just wire from control where they are needed.

  All outputs error.  One is enough.  Create an error in your front panel.  On the block-diagram wire the error in the first function of Sorrensen before the loop.  Where the error from the Sorrensen hit the loop function, change the terminal on a shift register (right click and select replace with shift register).  Move the error Out 2 to out of the loop on the right side.  Error 2 wire the register shift on the right side.  Everywhere, you need a mistake in, branch off the error in the thread because it is in the loop.  Wire all your outs of the error in the case of the event and the last Sorrensen function to a function of merge error.  Wire of this error on the shift register.  All your errors are combined in a single indicator.

  That should do for now.

• How can I apply the automatic spelling correction for selected fields from the data entered by the users of forms?

  I would like to be able to apply the spelling correction of selected fields in the forms I created using LiveCycle Designer 8.2 at runtime, as opposed at design time.  I understand that version 8 LCD has a spelling corrector new OWL for form designers.  But I want to say check the data entered by users using Acrobat Reader.  And I want to apply the spelling correction automatically on only selected fields.

  Currently it seems that fill out my forms, users must know how manually right-click on each field, and then select "Spell Check" from the dialog box to check spelling mistakes in the data that the user entered into the form.

  I would like to discover a way to apply the correction spelling in certain areas, as well as I am able to do in forms created using Acrobat Pro.  Acrobat Pro, I can set a property for each field to require the spell check.  but this feature seems to be missing in Livecycle Designer.

  I have check the object model for XFA forms hoping I could find a method I can call a JavaScript file, check the spelling based on an event such as onBlur.  But I have not found a method of spelling.

  Am I missing something simple?  Is there a way to define each field out controls when a user is filling out the form using the free software Acrobat Reader?

  Our users are not sophisticated and forcing spell check each field separately just doesn't cut it...

  Any help on this will be greatly appreciated.

  Thank you!

  -David Bartholomew

  Hi David,

  Two things...

  At design time has set the locale of the form to that coming out Acrobat checks. For example the locale English (United States) and English (United Kingdom) have Spellers; However the English (Ireland) does not work. Check the warnings tab to see if the spell checking is supported for your locale.

  If your locale form supports spell checking, so you can go to the script of the button below.

  If you form local does NOT support spell checking, Stephanie has a great work-around to force spell (http://forums.adobe.com/message/2233945#2233945).

  Put a normal button on the form and in the click event must have the following:

  app.execMenuItem ("spelling: spell check");

  Which will open the checker spelling for all fields.  Thanks to Paul for extract all elements of menu available (http://forums.adobe.com/message/1912914#1912914).

  Good luck

  Niall

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.
   

• "Mandatory filed is not defined ' error occurred before the user enter the stage

  Hello

  After this problem to see if anyone can help.

  I use vRO 5.5. I create a workflow and add three steps for the user to enter.

  In step 1, the user will choose param_1. For step 2, param_2 is defined as entry required and predefined of items list. He'll call an Action for this list. Param_1 will be the parameter of this action. See the image below:

  

  Now I start this workflow, after I select param_1, Action in step 2 will be called immediately and error "required field is not defined" appeared in step 2. But I do not click even next to step 2.

  

  I don't think it's a user of good experiences. Does anyone have a solution for this problem?

  Thank you

  Vicky

  Hi Vicky,

  There is no solution for this problem (in the case of the vCO Java client). I couldn't be the best possible UX, but it's how we run presentations.

  On the level of the API, there is no special handling for the steps. Each operation is performed on the entire presentation. That is, consumer API specifies no such thing as 'current' step - the API takes one or more input parameters (possible from different stages) and returns the presentation all re-evaluated.

  Therefore for the API client to track the current step and decide whether to display warnings/errors for fields that do not belong to the current step. client Java vCO has decided to display all steps validation errors; other clients may decide differently and provide the best UX.

• Not able to see anything the user

  Hello
  An of my user is logged in presentation for the first time Services and she sees nothing, I can it it when I connect to by Admin, I even added areas, but she is still not able to see anything, what could be the problem. She has disconnected and connected again couldn't see we need to do anything once the user connects for the first time.
  
  Quick help is necessary.
  
  Thank you
  Amit

  Hi Amit,

  What are exactly did you see? When you connect to do you get the below message?

  ! http://i45.Tinypic.com/30ximab.PNG!

  Or do you simply not dashboard/reports shared dashboards?

  If you get the above screen message, then you must:
  1) go to settings-> Administration-> Manage privileges.
  (2) under 'Access' make sure that 'Everyone' has access to dashboards and answers or specific users can access.

  If you do not receive the message above, but only can not see any shared reports try the following
  1) go to settings-> Administration-> manage presentation catalog
  (2) where it is said: ' catalog root: shared "click on catalog root
  3) click on the Permission (Lock) icon next to the shared folder
  (4) make sure that everyone has "read" permission
  (5) make sure that the two boxes (apply permissions to subfolders) and apply to the items in the folder are checked
  (6) give of course is not contradictory permissions (as everyone has read but specific is denied read).
  7) click done and accept the updates warn that it gives you.

  One of those who should fix this for you.

  -Joe

• Restoration to a corrupt user or copy corrupted to a newly created user. I am not allowed access to corrupt the user of another administrative user.

  When I try to copy the files from the user to a new user, the corrupt user is inaccesable when I click it.  I'm another user of the admin access.  I restarted the computer.  Does anyone have any suggestions?

  I encountered this problem immediately after removing an accessory program Apple ITunes that I have not used.  I did it to clear up disk space.  This has happened also when I got a low disk space to open the user.  I could open another admin user account and free up enough disk space to open the user.  When I try to connect to the corrupt user, it connects me to another user called (name.value of initial user followed a string of alpha-numberic characters)

  Thank you

  Hello Cscoler,

  Corruption of the profiles can be caused by malware, by repeated interruptions due to file system corruption and bad hardware issues. Did you run any malware removal software?

  When you created a new user account, have you configured it as an administrator? Do you receive error messages when you try to open a session in the corrupted profile, such as "the system has recovered from a serious error or user profile is corrupted"? When you log in the corrupted profile, are you able to view your data?

  Thank you

  James

• Adblocker Plus will not work with one of the user accounts that I put in place

  I've set up three user accounts.  An administrator, a non - pw protected and for me comments that I use all the time.  I have been using Adblocker Plus with Google Chrome for a year with no problems. Recently, advertisements have flooded surf the web and even webmail.  However, this does not happen when I open the Chrome in the administrator or guest accounts.

  How can I get the ad blocker to work properly on my account?  Thank you.

  Hello

  To resolve this problem, use the following methods in the order in which they are listed. After each method, check to see if the problem is resolved. If the problem is not resolved, try the next method.

  Method 1: Clean start.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.  Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Important: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Method 2: Scan Malware.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Please follow the steps below to use the scan to Microsoft Security.

  • Run the scanner from Microsoft from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • Click on download now and click Run.
  • Choose complete system scan and wait for the full analysis.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: Reset Internet Explorer settings.

  You can reset the Internet Explorer settings to return to the State they were when Internet Explorer has been installed on your PC. This can be useful to solve the problems that could be caused by some settings changed after installation. Reset Internet Explorer is not reversible, and all the previous settings are lost after the reset. Please follow the link below to reset the Internet settings,

  http://Windows.Microsoft.com/en-in/Internet-Explorer/reset-IE-settings#IE=ie-11

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Date field time: make calendar will appear when the user enters form.

  It is possible with JavaScript to make the calendar will appear once the user enters the date/time field (click and activate the date field time)?

  The field default time is really limited and the calendar can hardly be noticed.

  Thanks in advance!

  Hello

  as much as I know there is no to open the widget calendar via script.