Event Viewer error report

Similar Questions

• Event Viewer error "there was an error while trying to read the local hosts file." file "hosts" but good

  Hello

  In Event Viewer, I see a lot of mistakes like:

  Source: The customers DNS events

  There was an error trying to read the local hosts file.

  I read that threat indicating to rename the hosts for "hosts" file

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04

  HOWEVER, the name of the file in my computer appears as it should

  C:/Windows/System32/drivers/etc / "hosts".

  and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034

  What should I do to fix this error?

  P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer

  Thank you

  Veronica

  Try to re-create the hosts file.

  Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".

  Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.

  Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html

  You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

• The Event Viewer error on startup: "the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E.

  I use Windows XP with AMD processor clocked at 1.6 Ghz and 2 GB of RAM. This error appears in the event viewer whenever my computer starts. I don't know if it's doing any harm. can someone advise?

  original title: the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E

  Hello Steven,

  Did you ever receive notifications that a virus or malware has been removed from your system recently?
  My only thought is that it is the remains of an infection on your machine.
  It is most likely harmless, but I don't understand why you'd be concerned.
  Do you have any task scheduled to run at startup using Task Scheduler built into Windows?
  http://support.Microsoft.com/kb/308569
  I would check to see if there are tasks to run at startup:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tsconcepts03.mspx?mfr=true

• 459 browser in the event viewer errors

  These errors have concocted 459 times in my the event viewr (it will probably be more in the moment where I get a response) what is it, and how to solve?  I use google chrome as my default browser, and it crashes all the time.

  
  

  The master browser has received a server announcement from the SIAK-PC computer that believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  The master browser has received a server announcement from the computer PC ALEX who believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  The master browser has received a server announcement from the computer OFFICEMAX023 PC that believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  The master browser has received a server announcement from the IBM-A0U6WFXKY38 computer that believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  The master browser has received a server announcement from the computer PC OWNER who believes it is the master browser for the domain of transport NetBT_Tcpip_ {C6FC398A-D719-4F42-8CF7-E9615575EA2F}. The master browser stops or an election is forced.

  
  

  There are also a bunch of warning dispersed among the errors that say my computer tried to say that it is the master browser, but this isn't.

  
  

  Hello

  Hard to say that Chrome has a tendency to be unstable for many. Do you get any error messages?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------

  Do a Restore Point then you can recover if necessary (not that it should be necessary).

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------

  Check this entry

  Start - type in search-> Regedit Search top - make a right click on - RUN AS ADMIN.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters

  MaintainServerList Auto

  What other settings you have in this key? (there are others that we might need to compare).

  ==============================

  Easy to read Event Viewer Utility

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 event 1001 error report

  Hello, I had recently a problem with my computer locking up. I had several open tabs Chrome and has been messing around with VirtualBox. My display frozen, white and Brown, and my helmet started playing static. I looked in the error logs, and that's what I found. I could not find someone else with my specific problem, so thanks for any help you can offer.

  Log name: Application
  Source: Windows Error Reporting
  Date: 13/05/2016-16:33:03
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: computer
  Description:
  Bucket of error, type 0
  Name of the event: AppTermFailureEvent
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Temp\WER1B8D.tmpatk.KDMP
  C:\Windows\Temp\WER1B8E.tmp.AppCompat.txt
  C:\Windows\Temp\WER3BBC.tmp.XML

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_0_0_134b3ca4

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 6dc1ff6a-06b8-11e6-98ae-50465d9e3d61
  State: 0

  Not a single 1001 the 23 events in the file.  You have disabled of course the newspaper

  You have a number of things that should be addressed

  The maximum file size for the session "ReadyBoot" has been reached. Thus, events may be lost (not connected) to the file 'C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl '. The maximum size of files is currently set to 20971520 bytes.

  Cannot find the description of event ID 27 of source e1cexpress. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  This error EV is not responsible for freezing.

  I would like to run a file system check to start

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

• Service Event Viewer error: Does not

  Service Viewer event error message when you try to run the event viewer, said said that he is not running. Is there any solution for this?

  Hi RayOoooh,

  I am happy to know that you were able to solve the problem. Thanks for sharing the solution. I don't know that it will help other users with the same issue.

• Event viewer errors

  I had the best ever win 7 own reinstalling.

  not an error or a warning,

  but event viewer shows me 85 errors and warnings. WHY?

  Hi Louise,.

  Thank you for joining Microsoft Community!

  According to the description, it looks like you get errors in Event Viewer in Windows 7.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  1. What are the errors you get in spectators of the event?

  2 have had any changes made to the computer before the question?

  I have a few links that should help you to describe the information about the errors in the event viewer.

  Visit these links to learn more about Event Viewer.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Using the windows-related issues feel free to post here at Microsoft Community.

• NET optimization service event viewer error 1111

  the Viewer .net optimization service event 1111 service error

  Hello

  See the link, download the package and install. Check whether the problem is resolved.
  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

• hpqcxs08 hpqddsvc and missing service in the Windows Event Viewer

  I am running Win 7 64-bit Sp1, the printer is C7180 all in one

  When you run the Windows Event Viewer, system reports hpqcxs08 hpqddsvc missing in the path and service or are corrupt.

  When I search using windows Explorer, cannot find hpqcxs08 or hpqcxs08.dll.

  When I search using windows Explorer, cannot find hpqddsvc. It shows hpqddsvc.log

  How can this be corrected?

  Thanks for any help. John Foster

  Thanks for your info

• Message in the event viewer running XP Pro with SP3 get following: 7026 ID: start system or boot start drivers following could not load: nvatabus nvraid. How can I fix it?

  Get the following in the Event Viewer error message have had this message for quite some time

  ID 7026: boot start or system start following

  driver (s) failed to load: nvatabus nvraid. How do I

  This difficulty?  I am running XP Pro SP3. Would appreciate any help in this matter.

  Hello

  · What is the number and the model of the computer?

  · Remember the recent changes on the previous computer o the question?

  The problem is related to the display driver installed on the computer.

  Check the status of the card/video display adapter installed on your computer.

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, look for the screen reader and expand the drive, double-click the sub element to check if an error message or error code is listed.

  See the links below: http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=7026&EvtSrc=Service+Control+Manager&LCID=1033

  How to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• Windows Error Reporting error re #1001 Event Viewer: MpTelemetry, MSE

  I am running Windows 7 Home premium 64-bit.  Get the Windows Error Reporting (information level) #1001-

  Log name: Application
  Source: Windows Error Reporting
  Date: 18/01/2011 10:52:08

  AM
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Joanne-PC
  Description:
  Bucket of error, type 0
  Name of the event: MpTelemetry
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: 2152759308
  P2: unspecified
  P3: ScanFile
  P4: 2.1.6805.0
  P5: Microsoft Antimalware

  (BCF43643-A118-4432 - CHANTER-

  D861FCBCFCDE)
  P6: unspecified
  P7: unspecified
  P8:
  P9:
  P10:

  Attached files:

  These files are available here:
  C:\ProgramData\Microsoft\Windows

  \WER\ReportQueue

  \NonCritical_2152759308_1ec832eb2ce

  eb154aa61793319bc5d9cdf3883dd_035c2

  09a

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 48ee36c7-2323-11e0-90e7

  -002622f27952
  Display state: 4
  The event XML:
  <>

  xmlns = "http://schemas.microsoft.com."

  ' / Win/2004/08/Events/Event ">
   
      Reporting">
      <>

  Qualifiers = '0' > 1001
      4
      0

  0 x 80000000000000

  s >
      01-18T16:52:08.000000000Z">

  23730

  >
      Application
      Joanne-PC
     
   
   
     
     
      0
      MpTelemetry
      Not available
      0
      2152759308
      unspecified
      ScanFile
      2.1.6805.0
      Microsoft antimalware

  (BCF43643-A118-4432 - CHANTER-

  D861FCBCFCDE)
      unspecified
      unspecified
     
     
     
     
     
     
     
     
      C:\ProgramData\Microsoft

  \Windows\WER\ReportQueue

  \NonCritical_2152759308_1ec832eb2ce

  eb154aa61793319bc5d9cdf3883dd_035c2

  09a
     
     
      0
      48ee36c7-2323-11e0-90e7 -.

  002622f27952
      4
   
  

  I get these since I installed MSE this time on Windows 7 and also on my most old laptop with Vista.  I see that it is not critical, but I don't know what the problem is.  I have not found a problem when the MSE is scanning or protect my computer.

  Is this serious and I want to do something more?  If someone can tell me how to investigate this type of info in case the Viewer, I would be happy.

  Thanks for any help.

  Joanne

  Hi Joanne,
   
  You have any anti-virus or anti-malware to third party software installed with MSE (Microsoft Security Essentials)?
   
  I wouldn't think it's serious, but a mistake is a problem regardless of its gravity.
  However, I would like to you follow these steps and check to see if they help.
  Step 1:
   
  I would like you to put your computer in a clean boot State in order to eliminate any conflict of third party software causing the problem to occur. I suspect the involvement of a third-party software.
  Note: Please follow step 7 to your computer as usual after the test.
  Step 2:
  You can also Uninstall MSE and install version 2 of MSE and check if the problem persists.
  Note: Be sure to only install the version appropriate for your operating system
   
  See also:
   
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• NTFS bad block errors in Event Viewer

  I have a Dell 510 m with XP and a Toshiba HD. There are a few bad blocks that I see with the Diagnostic CD. They have not worsened in recent years. Recently, I saw a few 'Bad Block' errors in the event viewer. Diianostic CD shows me a bad block as before.

  My question is: when the Bad Block error, is to say that the ranking system, NTFS marked which also block bad, so he's not getting used again?  Otherwise, CHKDSK (the /R option?) will find the new bad block and mark it unusable?  If not, is there a way to do this?

  There is no option to replace the HD. I just need to keep this laptop going long enough to decide what to buy to replace.

  Thank you

  Peter

  Peter

  24 KB in bad sectors. = 6 clusters currently is not a serious problem. However, you must check regularly for some time to ensure that the number does not increase.

  Of course, any bad cluster can be bad news if it coincides with the location of a vital system file.

  You must also use chkdsk for repairs under this part of the report:
  Correcting errors in the Volume Bitmap.
  Windows found problems with the file system.
  Run CHKDSK with the /F (fix) option to correct these.

  Edit, Find with Volume Bitmap use search for more information:
  http://en.Wikipedia.org/wiki/Hierarchical_File_System

• I got more than 50 error messages in Event Viewer. How can I fix these problems?

  Between 3:45 am PST and 5:46 am PST, I found more than 50 messages of error in Win XP Home Ed.  SP 3, event viewer.  Can someone help me to solve these problems, please.

  First of all I would like to clear you all events, right-click each of the topics and choose erase all entries, you can save if you wish.

  Then run checkdisk:

  Here's how to make a bootable xp recovery console cd

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Disk-Defragmenter-has-detected-that-CHKDSK-is/397271a9-2417-4261-8fc7-145678b6a876

  read the response of L. Elder

  It is easier to run from the recovery console as it will mean less restarts, but you can go to start, run, type CMD and press ok

  in the cmd prompt box type chkdsk c: r, and then press enter

  Type a y for Yes to run at the next reboot, and then press ENTER.

  Then restart your pc, allow checkdisk run and complete, if errors are found and fixed, then run again until no errors are found.

  You can view the report in the event viewer, Applications, Winlogon.

  After the last checkdisk you run, then check the most recent errors that are listed after the last checkdisk.

  How many are there now?

  Your reply message, please include the following information:

  current antivirus

  brand, model and model number

  Click Start > run > type or paste msinfo32 > OK. Copy and paste the content in your response.

• Errors and warnings in the event viewer on the new laptop

  I have a HP 2000 Notebook PC with the product number QE279UA #ABA

  Bought and started using it at the end of December 2011.

  -Since then, I had immediate problems with the WiFi adapter (HP tried to solve the problem by sending a new network card, but the problem does not present yet so I never installed)

  -He had 3 cases where the laptop closed by himself for reasons unknown (he didn't feel not enough for overheating hot, and with it being new, I don't see it being already a reason), tonight being one of them, so when I saw somewhere online read the event viewer, I see as since 22 December 2011 I had 279 errors, 596 warnings. I do not understand one of them of course except the 3 criticals hence my laptop a intestinal shutdown. I have a feeling that these numbers are not good, given only to being less than 2 months old, but I don't know exactly what to ask about what to do. I wish I could have someone to look rather than try to describe the problems through e-mails and forums, but I don't have to spend hundreds of dollars to bring to Geek Squad or the other. How should I proceed?

  Thanks for any info.

  Warnings are normal and can be ignored.

  Mistakes can happen, I have 42 in the last 7 days, but my system works fine. Windows manages quite well the errors, and generally, they are not a problem, but will record in all cases. It takes a trained eye to sort through this and understand if there is a serious problem or not.

  Criticism can be a problem, but looks like they are at the unexpected stop, so no useful information can be drawn from those.

  If you go to control panel (display the icon) and click Action Center, that's where things that go wrong get reported you, if it is clear from all the messages, then you can ignore the event viewer.

  You have a problem with the unexpected stops, they are very difficult to unravel by the normal user and needs professional diagnosis.

  You are under warranty with HP? If you are, you can contact HP on the problem, make sure you have your personal files backed up before instructions from HP to resolve the shutdown problem.

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.